Exploring the effect of ultrasonic power, frequency, and load toward remediation of oil-contaminated beach and oilfield sands using ANOVA.

Despite the potential shown by previous investigations on the use of ultrasound for the remediation of oil-contaminated sand, the influence and interactions among ultrasonic parameters and oily sand are unclear, leading to possible ineffective treatment and high-power consumption. In order to improve the process efficiency, this work analyzes the effects of ultrasonic power, frequency, and load toward the cleaning of crude oil-contaminated sand, using two different sample positions and sand types. Crude oil-contaminated beach sand and produced sand from offshore oil well were used as samples. They were cleaned in custom-made ultrasonic bath reactor for 10 min with power from 30 to 120 W, frequency covering 25-60 kHz, and sand load of 10-100 g. With experimental design consisting multiple factors and levels, the interactions between factors in all possible combinations were determined using ANOVA (n = 210). From p-value based at 95% confidence interval and extensive F test, the three most significant factors were the sand type, the ultrasonic frequency, and the interaction between sand type and frequency. The best setting for suspended samples involved high frequency of 60 kHz, whereas bottom samples preferred low frequency at 28 kHz. This finding was justified when the acoustic pressure attenuation, standing wave pattern, and surface pitting/cracking were found in correlation with the cleaning results. Overall, the maximum treatment under ultrasonic bath solely gained around 60%, improvable by hybrid cleaning with other techniques such as chemical, biological, mechanical, and thermal.

Progress in ultrasonic oil-contaminated sand cleaning: a fundamental review.

Steady efforts in using ultrasonic energy to treat oil-contaminated sand started in the early 2000s until today, although pilot studies on the area can be traced to even earlier dates. Owing to the unique characteristics of the acoustic means, the separation of oil from sand has been showing good results in laboratories. This review provides the compilation of researches and insights into the mechanism of separation thus far. Related topics in the areas of oil-contaminated sand characterizations, fundamental ultrasonic cleaning, and cavitation effects are also addressed. Nevertheless, many of the documented works are only at laboratory or pilot-scale level, and the comprehensive interaction between ultrasonic parameters towards cleaning efficiencies may not have been fully unveiled. Gaps and opportunities are also presented at the end of this article.