RESUMO
BACKGROUND AND OBJECTIVES: To minimize stroke-related deaths and maximize the likelihood of cerebral reperfusion, medical professionals developed the "code stroke" emergency protocol, which allows for the prompt evaluation of patients with acute ischemic stroke symptoms in pre-hospital care and the emergency department (ED). This research will outline our experience in implementing the stroke code protocol for acute ischemic stroke patients and its impact on door-to-needle time (DTN) in the ED. METHODS: Our study included patients with a "code stroke alert" upon arrival at the emergency department. The final sample of this study consisted of 258 patients eligible for intravenous (IV) thrombolysis with an onset-to-door time < 4.5 h. ED admissions were categorized into two distinct groups: "day shift" (from 8 a.m. to 8 p.m.) (n = 178) and "night shift" (from 8 p.m. to 8 a.m.) (n = 80) groups. RESULTS: An analysis of ED time targets showed an increased median during the day shift for onset-to-ED door time of 310 min (IQR, 190-340 min), for door-to-physician (emergency medicine doctor) time of 5 min (IQR, 3-9 min), for door-to-physician (emergency medicine doctor) time of 5 min (IQR, 3-9 min), and for door-to-physician (neurologist) time of 7 min (IQR, 5-10 min), also during the day shift. During the night shift, an increased median was found for door-to-CT time of 21 min (IQR, 16.75-23 min), for door-to-CT results of 40 min (IQR, 38-43 min), and for door-to-needle time of 57.5 min (IQR, 46.25-60 min). Astonishingly, only 17.83% (n = 46) of these patients received intravenous thrombolysis, and the proportion of patients with thrombolysis was significantly higher during the night shift (p = 0.044). A logistic regression analysis considering the door-to-needle time (minutes) as the dependent variable demonstrated that onset-to-ED time (p < 0.001) and door-to-physician (emergency medicine physicians) time (p = 0.021) are predictors for performing thrombolysis in our study. CONCLUSIONS: This study identified higher door-to-CT and door-to-emergency medicine physician times associated with an increased DTN, highlighting further opportunities to improve acute stroke care in the emergency department. Further, door-to-CT and door-to-CT results showed statistically significant increases during the night shift.
RESUMO
The impression materials utilized today in dental medicine offer a good reproducibility and are easily accepted by patients. However, because they are polymer-based, they have issues regarding their dimensional stability. In this respect, the present work proposes a new type of dental impression, which is reinforced with rigid mouthguards. The aim of the study is to test the performances of such new impressions by comparing them to conventional ones-from this critical point of view, of the dimensional stability. Three types of polymeric materials were considered for both types of impressions: alginate, condensation silicone, and addition silicone. In order to obtain the new type of impressions, a manufacturing technique was developed, comprising the following phases: (i) conventional impressions were made; (ii) a plaster model was duplicated, and 15 rigid mouthguards were obtained; (iii) they were inserted in the impression technique, with each mouthguard positioned on the cast before the high-consistency material was inserted in the tray and the practitioner took the impression; (iv) the mouthguard remained in the tray and the low-viscosity material was inserted over the mouthguard; (v) the impression was positioned on the model, and after the material hardened, the mouthguard-reinforced impression was analyzed. In the evaluation of the dimensional stability, rigorous statistical analysis was essential to discern the performance differences between conventional and mouthguard-reinforced dental impressions. Statistical analyses employed non-parametric Mann-Whitney U tests because of the non-normal distribution of the data. They indicated a statistically significant improvement in the dimensional stability of addition silicone impressions when reinforced with mouthguards (p < 0.05), showcasing superior performance over conventional methods. Conversely, alginate and condensation silicone reinforced impressions did not exhibit the same level of stability improvement, suggesting the need for further optimization of these materials. In conclusion, from the three considered elastomers, addition silicone was found to be the prime candidate for high-precision dental impressions, with the potential to improve their quality from conventional impressions by utilizing the proposed reinforcing technique.
RESUMO
STUDY DESIGN: Mechanical thrombectomy (MT) via the transbrachial approach (TBA) is a very rare option used in cases of patients with aortic pathologies and acute ischemic stroke (AIS) due to the insufficient evidence in the literature, the difficulty from a technical point of view and the result of this technique influenced by the complications that frequently accompany it. BACKGROUND: Only a few cases of patients with aortic pathologies and acute ischemic stroke where MT via TBA were reported in the literature, and its application in the emergency management of AIS has still not been dealt with in detail. OBJECTIVES: Out of a need to clarify and clearly emphasize the effectiveness of this approach in emergency MT via TBA in patients with AIS and aortic pathologies, this literature review and case report has the following objectives: the first one is the presentation of an emergency MT via transbrachial approach performed in a 44-year-old patient with AIS and diagnosed aortic coarctation during transfemural approach (TFA), with successful reperfusion in our department and the second one is to review the cases reports of patients with different aortic pathologies and AIS reperfusion therapy performed by MT via TBA from the literature. METHODS: A total of nine cases (one personal case and eight published cases) were revised in terms of aortic pathologies type, reperfusion therapy type, and the complication of both mechanical thrombectomy and local transbrachial approach. RESULTS: Mechanical thrombectomy through the transbrachial approach was the first choice in more than half of these cases (55.55%, n = 5 cases) in the treatment of acute ischemic stroke in the presence of previously diagnosed aortic pathologies. In one-third of all cases (33.33%, n = 3, our case and 2 case reports from the literature), the transbrachial approach was chosen after attempting to advance the guiding catheter through the transfemoral approach and intraprocedural diagnosis of aortic pathology. In only one case, after an ultrasound evaluation of the radial artery that showed a monophasic flow, MT was performed via TBA. Local transbrachial complication was reported in one case, and in two other cases, it was not stated if there were such complications. Hemorrhagic transformation of AIS was reported in two cases that underwent MT-only cerebral reperfusion via TBA, one with acute aortic dissection type A and our case of previously undiagnosed aortic coarctation. In the cases in whom short and long-term follow-up was reported, the outcome of treatment, which was not exclusively endovascular (77.77% cases with only MT and 33.33% with association of first thrombolysis and after MT), was good (six from nine patients). In two case reports, the outcomes were not stated, and one patient died after a long hospitalization in the intensive care unit from respiratory complications (our patient). CONCLUSIONS: Being a clinical emergency, acute ischemic stroke requires urgent medical intervention. In patients with aortic pathologies, where acute ischemic stroke emergency care is a challenge, mechanical thrombectomy via the transbrachial approach is a safe alternative method for cerebral reperfusion.
RESUMO
BACKGROUND: COVID-19 has led to a global health crisis that is defining for our times and one of the greatest challenges to emerge since World War II. The potential impact of the pandemic on mental health should not be overlooked, especially among vulnerable populations such as women who gave birth during the COVID-19 pandemic. MATERIALS AND METHODS: The study is a cross-sectional survey conducted from 1 March 2020 to 1 March 2023, during the period of the SARS-CoV-2 (COVID-19) pandemic, based on a retrospective evaluation of 860 postpartum women. The screening tool used to assess symptoms of postpartum depression was the Edinburgh Postnatal Depression Rating Scale (EPDS) questionnaire. The questionnaire was completed both in the Obstetrics and Gynaecology Clinical Sections I and II of the "Pius Brînzeu" County Emergency Hospital in Timisoara, Romania, and online using Google Forms. RESULTS: The highest severity of postpartum depression symptoms was observed during the COVID-19 pandemic. The results of the study conducted during the period of the SARS-CoV-2 pandemic (COVID-19) showed that the prevalence of major postpartum depressive disorder (EPDS ≥ 13) was 54.2% (466 patients), while 15.6% (134) had minor depressive disorder (10 < EPDS ≤ 12) in the first year after delivery. Comparing these results with those obtained in research conducted before the onset of the pandemic period showed an alarming increase in the prevalence of postpartum depression. The risk factors associated with postpartum depression included the type of delivery, level of education, socio-economic conditions, health status, age, background, and personal obstetric history (number of abortions on demand, parity). CONCLUSIONS: The effects of the pandemic on mental health are of particular concern for women in the first year after childbirth. Observing these challenges and developing effective measures to prepare our health system early can be of great help for similar situations in the future. This will help and facilitate effective mental health screening for postpartum women, promoting maternal and child health.
RESUMO
Background and objectives: Although the intravenous tissue plasminogen activator (rt-PA) has been shown to be effective in the treatment of acute ischemic stroke (AIS), only a small proportion of stroke patients receive this drug. The low administration rate is mainly due to the delayed presentation of patients to the emergency department (ED) or the lack of a stroke team/unit in most of the hospitals. Thus, the aim of this study is to analyze ED time targets and the rate of rt-PA intravenous administration after the initial admission of patients with AIS in an ED from a traditional healthcare center (without a neurologist or stroke team/unit). Methods: To analyze which factors influence the administration of rt-PA, we split the general sample (n = 202) into two groups: group No rt-PA (n = 137) and group rt-PA (n = 65). This is based on the performing or no intravenous thrombolysis. Results: Analyzing ED time targets for all samples, we found that the median onset-to-ED door time was 180 min (IQR, 120-217.5 min), door-to-physician time was 4 min (IQR, 3-7 min), door-to-CT time was 52 min (IQR, 48-55 min), and door-in-door-out time was 61 min (IQR, 59-65 min). ED time targets such as door-to-physician time (p = 0.245), door-to-CT time (p = 0.219), door-in-door-out time (p = 0.24), NIHSS at admission to the Neurology department (p = 0.405), or NIHSS after 24 h (p = 0.9) did not have a statistically significant effect on the administration or no rt-PA treatment in patients included in our study. Only the highest door-to-CT time was statistically significantly correlated with the death outcome. Conclusion: In our study, the iv rt-PA administration rate was 32.18%. A statistically significant correlation between the highest door-to-CT time and death outcome was found.
RESUMO
Background and Objectives: The excessive use of smartphones for various tasks led to a new adverse postural phenomenon called text neck. The aim of this study was to investigate the effect of the text neck posture (TNP) on static occlusion by using the T-Scan III occlusal diagnostic system. Materials and Methods: Nineteen subjects (aged 20 to 24 years) were considered for this research. They had normal values for anterior overbite and overjet, Angle Class I occlusion, no posterior crossbite, and no signs or symptoms of cervical or temporo-mandibular disorders. Occlusal registrations were performed with the T-Scan III system in a normal, neutral head posture (NHP), as well as in the TNP. The investigated parameters were: occlusion time (OT), asymmetry index of the occlusal force (AOF), percent of the maximum movie force (%MMF), and the time elapsed from the last occlusal contact until the maximum intercuspation (MAT-OTB). The last three parameters were analyzed in the maximum area frame (MA) of the registrations. For the statistical analysis of the recorded data, the Wilcoxon Signed Ranks test and the Spearman's correlation coefficient were used. Results: The following values were obtained in NHP and in TNP: for AOF, 14.88 ± 10.39% and 18.04 ± 12.83%, respectively; for OT, 1.34 ± 1.84 s and 1.32 ± 1.8 s, respectively; for the %MMF, 97.5 ± 2.83% and 96.31 ± 3.17%, respectively; for MAT-OTB, 2.08 ± 1.82 s and 1.45 ± 2.3 s, respectively. There were no statistically significant differences between the static occlusal parameters measured in NHP and those in TNP. However, the high values of the AOF and OT in NHP revealed an imbalance of the occlusal force distribution between the right and left side in maximum intercuspation (MI), as well as a lack of simultaneity of static occlusal contacts. Furthermore, there was a significant, direct, and strong correlation between OT and AOF in NHP. Conclusions: The NHP should not be used as the starting position in TNP simulations in T-Scan studies, so as to avoid statistically insignificant differences between static occlusion in NHP and TNP. The healthy standing subjects, with normal occlusal relationships from the clinical point of view, revealed an occlusal instability in NHP when examined with the T-Scan.
Assuntos
Má Oclusão , Transtornos da Articulação Temporomandibular , Força de Mordida , Dor no Peito , Oclusão Dentária , Humanos , PosturaRESUMO
It is well-known that proper tooth brushing has the effect of stimulating microcirculation in a healthy gingiva. The aim of this study was to evaluate the microcirculation dynamics at the level of healthy marginal gingiva in adolescents after changing their toothbrush. Three evaluation instruments were employed to assess and quantify the effects on the marginal gingiva: the periodontal probing depth (PD), gingival index (GI) and laser Doppler flowmetry (LDF). A total of 12 adolescents, aged between 15 and 20, were enrolled in the study, resulting in a total of 72 frontal upper teeth for PD and GI and 48 gingival interdental sites for LDF assessment. For each measurement, the pulp blood flow signal was recorded for 1 min and represented as a pulsatory signal. Data were collected in four moments: before the toothbrush changed and 24 h, 7 days and 14 days after. For the statistical analysis, the nonparametric Friedman test was applied for comparisons between more than two pair numeric series and for comparisons between two sets of pair values without Gaussian distribution, the Wilcoxon signed-rank test was applied. The paired t test was used for two sets of normally distributed paired values. The results showed that using a new toothbrush in the adolescent population with healthy gingiva can induce statistically significant increases in gingival blood flow, which remain at a high level even at two weeks. The GI also increases significantly at 7 days and 14 days, while the periodontal PD does not change significantly.
RESUMO
Bone scaffolds must fulfil numerous and sometimes contradictory characteristics: biocompatibility, bioactivity, high porosity, and appropriate mechanical strength. To tackle some of these issues, this study has several aims for the development of such scaffolds for dentistry applications: (i) to utilize appropriate materials (ceramics and sponges) and to introduce a novel, potentially performant ceramic material; (ii) to characterize the obtained scaffolds by using a range of methods; (iii) to compare and to correlate the assessment results with the scope to validate them reciprocally. There are two commercially available dental ceramics (i.e., Ceramco iC Natural Enamel (E) and Ceramco iC Natural Dentine (D), (DeguDent GmbH, Hanau-Wolfgang, Deutschland)) that are considered, as well as a new-developed porcelain (ceramic C). To obtain porous structures of scaffolds, each ceramic is introduced in two different sponges: a denser one, green (G) and a less dense one, blue (B). A total of 60 samples are manufactured and divided in six study groups, obtained by combining the above materials: GE, BE, GD, BD, GC, and BC (where the first letter represents the sponge type and the second one the utilized ceramic). Several methods are applied to characterize their chemical composition, as well as their macro- and micro-porosity: X-ray Diffraction (XRD), apparent porosity measurements, scanning electronic microscopy (SEM), and confocal microscopy (CM). The latter two methods image the inner (porous) and the outer/cortical (denser) areas of the samples. The results show a good porosity (i.e., dimensions and uniformity of pores) of around 65% for the final group BC, with satisfactory values of around 51% for BD and GC. A certain correlation is made between SEM, CM, and the apparent porosity results. The biocompatibility of the new ceramic C is demonstrated. Finally, a necessary trade-off is made with the mechanical strength of the obtained scaffolds, which was also evaluated. From this point of view, Group BD has the highest compressive strength of around 4 MPa, while Group BC comes second, with around 2 MPa. This trade-off between porosity and mechanical strength suggests a choice between Groups BC and BD, which are the best with regard to the porosity and mechanical strength criterium, respectively.
RESUMO
Background: Depression and anxiety are prevalent issues amongst individuals suffering from thoracic cancer. Gender differences in coping with thoracic cancer have a serious impact upon the management of emotional distress. The purpose of our study has been to assess sex variations in handling anxiety and depression, including the use of coping mechanisms and their relationship with respect to anxiety and depression. Methods: This cross-sectional study registered 18 women and 22 men with non-metastatic lung cancer and operated upon. Pre-operatively and at one month post-operatively, the patients were assessed by means of scales (COPE, GAD-7 and PHQ-9). Results: Post-operatively, the intensity of depression and anxiety was substantially greater in males than in females (p = 0.049, p = 0.042). Male individuals tended to use coping mechanisms of humour (p = 0.009) and restraint (p = 0.029) significantly more frequently than women. Moreover, in women, depression correlated significantly with denial and behavioural deactivation (rho = 0.465, p = 0.029, respectively, rho = 0.562, p = 0.006); whilst anxiety, similarly, correlated with positive interpretation, behavioural deactivation, and use of social-emotional support (rho = 0.484, p = 0.022, respectively, rho = 0.590, p = 0.004 and rho = 0.502, p = 0.017). Furthermore, in males, depression correlated significantly with mental deactivation, use of social-instrumental and social-emotional support (rho = 0.702, p = 0.001, respectively, rho = 0.505, p=0.033, and rho = 0.773 with p < 0.001), whilst anxiety correlated significantly with mental deactivation, denial, and use of social-emotional support (rho = 0.597, p = 0.009, respectively, rho = 0.553 with p = 0.017 and rho = 0.755, p < 0.001). Conclusion: There were gender divergences in the use of coping mechanisms and the level of post-surgical anxiety and depression. We found significant positive relationships between some coping mechanisms and depression/anxiety. The patient's gender governs the coping style, which in turn has bearing upon the post-operative evolution.
RESUMO
Maintaining the original trajectory of the root canal is a major challenge in endodontic therapy, especially in narrow and curved root canals. The present study aims to assess the shaping capacity of three endodontic systems made of different nickel−titanium alloys on simulated curved root canals. Thirty-six endodontic resin blocks (Ref. V040245, VDW) divided into three groups, each of twelve blocks (n = 12), were shaped, photographed, and analyzed: Group 1-Protaper Gold (PTG) (Dentsply Maillefer, Ballaigues, Switzerland) F2 25/08; Group 2-Reciproc Blue (RB), RB 25/08 (VDW, Munich, Germany); Group 3-WaveOne Gold (WOG) (Dentsply Maillefer), WOG 25/07. Each block was standardized and photographed before and after shaping in the same position, with the foramen oriented to the left. Post-shaping images were superimposed onto the initial ones. Thirteen measurement points were used for evaluation, spaced with 1 mm distance from one another, from level 0, apical foramen, to level 12, coronal orifice. The amount of removed resin from inner (X1) and outer (X2) walls, the direction of transportation (X1 − X2), and the centering ability (X1 − X2)/Y were measured, calculated, and comparatively analyzed. Statistical differences (p < 0.05) were observed between the shaping capacity of the considered systems in the middle and coronal thirds. PTG had a better centering ability than WOG and RB in the coronal third, while RB was more centered in the middle third in comparison to both WOG and PTG. In the apical third, the centering capacity of WOG was higher, without being statistically significant. WOG 25/07 and PTG 25/08 tend to cut more on the inner wall of the root canals, and RB 25/08 on the external one.
RESUMO
Teething is considered a significant event in the growth and development of the child by parents and especially by paediatric dentists and forensic scientists. They constantly need an "up-to-date mirror" of its variability for different geographic regions. The aims of the current study were to determine the timing and sequence of primary tooth emergence, and to establish a correlation between tooth eruption and general growth and external parameters in a sample of Romanian children. This study included 70 healthy children (53% girls and 47% boys), and the analysed data resulted from the questionnaires completed by parents during the whole process. General and specific data on primary teeth eruption were obtained. The differences between sexes were insignificant, except for the maxillary and mandibular canines (p = 0.047 and p = 0.018) and lower temporary second molars (p < 0.001), which were significantly increased in boys. The differences found between the two hemiarches were insignificant (p = 0.197). The mean age of eruption of the first tooth erupted was 7.07 ± 1.990 months. The unpaired t-test was used for comparison of the timings of eruption of the first primary teeth, according to the number of previous births and type of diet, and it was insignificant (p = 0.665 and p = 0.983 respectively).
RESUMO
The purpose of this study was to evaluate the clinical outcome of feldspathic ceramic laminate veneers over a 7-year period using minimally invasive techniques, such as vertical preparation (without prosthetic finish line), or no preparation (no-prep). A total of 170 feldspathic ceramic veneers were cemented in the anterior region, including 70 maxillary and 100 mandibular veneers, after special conditioning of the teeth and restorations. The veneers were evaluated using the FDI World Dental Federation criteria evaluation kit after recalling all the patients between February and June 2021. In total, 14 feldspathic veneers failed and were replaced with lithium disilicate because of core fracture, and 10 cases of chipping occurred on the ceramic surface and were polished. The overall survival rate was 91.77% for up to 7 years of function, with a failure rate of 8.23%. In this retrospective survival analysis, the failures, including the fracture of veneers and dental hard tissue, occurred both in prep and no-prep teeth. No failures were observed in veneers with a maximum thickness of 0.5 mm compared to those with a maximum thickness of 1 mm, 1.5 mm, 2 mm, and 2.5 mm.
RESUMO
Background and Objectives: Non-invasive prenatal testing (NIPT) has been confirmed as the most accurate screening test for trisomies 21, 18, 13, sex chromosomes aneuploidies and several microdeletions. This study aimed to assess the accuracy of cell free DNA testing based on low-level whole-genome sequencing to screen for these chromosomal abnormalities and to evaluate the clinical performance of NIPT. Materials and Methods: 380 consecutive cases from a single genetic center, from Western Romania were included in this retrospective study. Cell-free nucleic acid extraction from maternal blood, DNA sequencing and analysis of sequenced regions were performed by BGI Hong Kong and Invitae USA to determine the risk of specific fetal chromosomal abnormalities. In high-risk cases the results were checked by direct analysis of fetal cells obtained by invasive methods: 6 chorionic villus sampling and 10 amniocenteses followed by combinations of QF-PCR, karyotyping and aCGH. Results: NIPT results indicated low risk in 95.76% of cases and high risk in 4.23%. Seven aneuploidies and one microdeletion were confirmed, the other results were found to be a false-positive. A gestational age of up to 22 weeks had no influence on fetal fraction. There were no significant differences in fetal fraction across the high and low risk groups. Conclusions: This is the first study in Romania to report the NIPT results. The confirmation rate was higher for autosomal aneuploidies compared to sex chromosome aneuploidies and microdeletions. All cases at risk for trisomy 21 were confirmed. Only one large fetal microdeletion detected by NIPT has been confirmed. False positive NIPT results, not confirmed by invasive methods, led to the decision to continue the pregnancy. The main limitation of the study is the small number of patients included. NIPT can be used as a screening method for all pregnancies, but in high-risk cases, an invasive confirmation test was performed.
Assuntos
Transtornos Cromossômicos , Aconselhamento Genético , Aneuploidia , Transtornos Cromossômicos/diagnóstico , Transtornos Cromossômicos/epidemiologia , Transtornos Cromossômicos/genética , Feminino , Humanos , Lactente , Gravidez , Estudos Retrospectivos , RomêniaRESUMO
Background: Contribution of global and regional longitudinal strain (GLS) for clinical assessment of patients with heart failure with preserved ejection fraction (HFpEF) is not well established. We sought to evaluate subclinical left ventricular dysfunction secondary to coronary artery disease (CAD) in HFpEF patients compared with hypertensive patients and age-matched healthy subjects. Material and methods: This was a retrospective study that included 148 patients (group 1 = 62 patients with HFpEF, group 2 = 46 hypertensive patients, and group 3 = 40 age-matched control subjects). Peak systolic segmental, regional (basal, mid, and apical), and global longitudinal strain were assessed for each study group using two-dimensional speckle-tracking echocardiography (2D-STE). Results: GLS values presented statistically significant differences between the three groups (p < 0.001); markedly increased values (more negative) were observed in the control group (-20.2 ± 1.4%) compared with HTN group values (-18.4 ± 3.0%, p = 0.031) and with HFpEF group values (-17.6 ± 2.3%, p < 0.001). The correlation between GLS values and HTN stages was significant, direct, and average (Spearman coefficient rho = 0.423, p < 0.001). GLS had the greatest ability to detect patients with HFpEF when HFpEF + CAD + HTN diastolic dysfunction (n = 30) + CON diastolic dysfunction (n = 2) from HFpEF + CAD + HTN + CON was analyzed. (optimal GLS limit of -19.35%, area under curve = 0.833, p < 0.001). Conclusions: Global longitudinal strain can be used for clinical assessment in differentiating coronary and hypertensive patients at higher risk for development of systolic dysfunction.
Assuntos
Insuficiência Cardíaca , Disfunção Ventricular Esquerda , Coração , Insuficiência Cardíaca/diagnóstico por imagem , Humanos , Estudos Retrospectivos , Volume Sistólico , Disfunção Ventricular Esquerda/diagnóstico por imagem , Função Ventricular EsquerdaRESUMO
BACKGROUND: Poorly informed college students tend to adopt the habit of cigarette smoking. This habit often continues into their adulthoods, adversely affecting the population's health and increasing the burden on healthcare systems. AIM: We aimed at exploring the predictors of the avoidable habit of smoking. We performed an analysis of the correlation between the potential predictors (marijuana use among peers and truancy) and the tobacco smoking statuses of the students. MATERIAL AND METHOD: Our study sample included 2976 students from colleges in Timis County, Romania, during the 2018-2019 period. The gender distribution of the participants was 62.5% girls and 37.5% boys, between the ages 18 and 25 years. A logistic regression test was performed to determine the impact of some personal and environmental factors, which are responsible for heavy smoking in this population. RESULTS: Our findings suggest that the degree of marijuana smoking among friends and the frequency of college truancy are meaningful predictors of heavy smoking among young adults. The students with higher cigarette smoking rates had significantly more marijuana-smoking friends when compared to the students with average smoking rates. The truancy was higher among the students with higher cigarette smoking rates, compared to the students with average smoking rates.
RESUMO
INTRODUCTION: The role of digoxin (cardiac glycoside) in controlling the heart rate (HR) for the treatment of atrial fibrillation (AF) patients has not been explored in depth. METHODS: To contribute to the limited data, our team conducted retrospective analysis of the clinical records of 1444 AF patients. We divided the AF patients into two groups, wherein group 1 patients were treated with beta-blockers (BB), low-dose digoxin, and an anticoagulant (vitamin K antagonist/factor-IIa inhibitor/factor-Xa inhibitor), and group 2 patients were treated with just BB and an anticoagulant. Our objectives were to compare the impact of combination therapy of BB and digoxin on the resting HR in patients with permanent AF and the patients' quality of life (QOL) at periodic intervals. RESULTS: The findings of our study showed a better control of the resting HR rate (<110bpm) and an improved QOL among the group 1 patients when compared with group 2 patients. CONCLUSION: Our findings are indicative of the favorable clinical outcomes that resulted from the addition of a low-dose of digoxin to the AF treatment regimen. However, larger studies/trials elucidating the outcomes of AF patients treated with the dual rate control therapy are required, to clarify the role of digoxin, guide the choice of agents, and standardize the AF treatment protocol.
Assuntos
Antagonistas Adrenérgicos beta/administração & dosagem , Antiarrítmicos/administração & dosagem , Anticoagulantes/administração & dosagem , Fibrilação Atrial/tratamento farmacológico , Digoxina/administração & dosagem , Quimioterapia Combinada , Feminino , Frequência Cardíaca/efeitos dos fármacos , Humanos , Masculino , Pessoa de Meia-Idade , Qualidade de Vida , Estudos RetrospectivosRESUMO
Stress, anxiety, and post-surgical chest pain are common problems among patients with thoracic surgical pathology. The way in which psychological distress is managed-the coping style-can influence the postsurgical evolution and quality of life of patients. In our study, we monitored the influence of coping style on patients' anxiety and the intensity of post-operative chest pain. We conducted a cross-sectional study on 90 subjects with thoracic surgical pathology. One month after their surgeries, patients completed the following scales and questionnaires, translated, adapted, and validated for the Romanian population: COPE scale inventory, Generalized Anxiety Disorder-7 Questionnaire, McGill Pain Questionnaire, and Numeric Pain Rating Scale. Anxiety (evaluated using the Generalized Anxiety Disorder-7 Questionnaire) and postoperative thoracic pain intensity (evaluated by means of the Numeric Pain Rating Scale, Number of Words Chosen, and McGill Pain Questionnaire) were significantly higher in patients exhibiting social-focused coping than in patients presenting emotion-focused or problem-focused coping as their main coping style (Kruskal-Wallis, p = 0.028, p = 0.022, p = 0.042, p = 0.007). In our study, there were no differences observed in pain intensity relative to level of anxiety. Coping style is an important concept in the management of anxiety and pain experienced by patients undergoing chest surgery. Therefore, a multidisciplinary approach should be considered in clinical practice.
RESUMO
BACKGROUND AND OBJECTIVES: The aim of this study is to demonstrate the increased efficiency achieved by dental practitioners when carrying out an ex vivo training process on 3D-printed maxillaries before performing in vivo surgery. MATERIALS AND METHODS: This developed ex vivo procedure comprises the following phases: (i) scanning the area of interest for surgery; (ii) obtaining a 3D virtual model of this area using Cone Beam Computed Tomography (CBCT); (iii) obtaining a 3D-printed model (based on the virtual one), on which (iv) the dental practitioner simulates/rehearses ex vivo (most of) the surgery protocol; (v) assess with a new CBCT the 3D model after simulation. The technical steps of sinus augmentation and implant insertion could be performed on the corresponding 3D-printed hemi-maxillaries prior to the real in vivo surgery. Two study groups were considered, with forty patients divided as follows: Group 1 comprises twenty patients on which the developed simulation and rehearsal procedure was applied; Group 2 is a control one which comprises twenty patients on which similar surgery was performed without this procedure (considered in order to compare operative times without and with rehearsals). RESULTS: Following the ex vivo training/rehearsal, an optimal surgery protocol was developed for each considered case. The results of the surgery on patients were compared with the results obtained after rehearsals on 3D-printed models. The performed quantitative assessment proved that, using the proposed training procedure, the results of the in vivo surgery are not significantly different (p = 0.089) with regard to the ex vivo simulation for both the mezio-distal position of the implant and the distance from the ridge margin to sinus window. On the contrary, the operative time of Group 1 was reduced significantly (p = 0.001), with an average of 20% with regard to in vivo procedures performed without rehearsals (on the control Group 2). CONCLUSIONS: The study demonstrated that the use of 3D-printed models can be beneficial to dental surgeon practitioners, as well as to students who must be trained before performing clinical treatments.
RESUMO
Background and Objectives: In Coronavirus Disease 2019 (COVID-19), which is caused by the infection with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the clinical manifestations are primarily related to the pulmonary system. Under 10% of cases also develop gastrointestinal events such as diarrhea, nausea, vomiting and abdominal pain. Materials and Methods: We conducted an observational, retrospective study in the Infectious Diseases Clinic of "Victor Babes" Hospital, Timis County, in order to assess the incidence, outcome and risk factors for clostridium difficile infection (CDI) in COVID-19 patients. Results: Out of 2065 COVID-19 cases, hospitalized between 1st September 2020 and 30th April 2021, 40 cases of CDI were identified with 32 cases of hospital-onset of CDI and eight cases of community-onset and healthcare-associated CDI. By randomization, polymerase chain reaction ribotyping of Clostridium Difficile was performed in six cases. All the randomized cases tested positive for ribotype 027. The percentage of cases recovered with complications at discharge was higher among COVID-19 patients and CDI (p = 0.001). The in-hospital stay, 36 days versus 28 days, was longer among COVID-19 patients and CDI (p = 0.01). The presence of previous hospitalization (p = 0.004) and administration of antibiotics during the hospital stay, increased the risk of CDI among COVID-19 patients. The mean adjusted CCI at admission was lower among controls (p = 0.01). In two cases, exitus was strictly CDI-related, with one case positive for 027 ribotype. Conclusions: CDI has complicated the outcome of COVID-19 patients, especially for those with comorbidities or previously exposed to the healthcare system. In the face of the COVID-19 pandemic and the widespread, extensive use of antibiotics, clinicians should remain vigilant for possible CDI and SARS-CoV-2 co-infection.
Assuntos
COVID-19 , Clostridioides difficile , Doenças Transmissíveis , Infecção Hospitalar , Antibacterianos/uso terapêutico , Clostridioides difficile/genética , Doenças Transmissíveis/tratamento farmacológico , Hospitais , Humanos , Pandemias , Estudos Retrospectivos , Ribotipagem , Romênia/epidemiologia , SARS-CoV-2RESUMO
Background and Objectives: Ceramic veneers represent the most appropriate treatment option for minimally invasive aesthetic rehabilitation. For long-term clinical success, the accurate marginal and internal adaptation of dental restorations are of paramount importance. The aim of this in vitro study is to assess the effect of a novel (patented) design of veneers compared to conventional ones on their marginal and internal gap to the prepared tooth surface. Materials and Methods: Twenty-four lithium disilicate ceramic veneers are obtained using Computer-Aided-Design (CAD) and then milled using Computer-Aided-Manufacturing (CAM). The samples are divided into two groups: 12 conventional (CO) veneers (i.e., with a linear marginal contour) and 12 crenelated (CR) veneers, the latter with the novel sinusoidal marginal design. All samples are bonded to frontal teeth, and the adhesive interfaces are analyzed using two methods, optical microscopy and micro-Computed Tomography (CT): the former for the accuracy of the marginal gap and the latter for the internal gap (as well as for the homogeneity of the luting cement) of ceramic veneers. Results: STATA and one-way ANOVA tests reveal significant differences between CO and CR veneers: (i) the marginal gap is smaller for CR (64 µm) than for CO veneers (236 µm); (ii) the internal adaptation is better for CR veneers: for a cement width of up to 120 µm, the covered surface for the CR group is 81.5%, while for the CO group it is 64.5%; (iii) the mean of the porosities within the cement is not significantly different (3.4·106 µm3 for CO and 3.9·106 µm3 for CR veneers), with a higher standard deviation for the CO group. Analytical modeling is achieved for internal gaps using the micro-CT results. The characteristic functions obtained allow us to compare the volume of luting cement for the two types of veneers. Conclusion: The novel veneers design produces an improvement in the marginal and internal adaptation of the restorations to the prepared tooth surface. Thus, it provides favorable premises for better clinical performances.