Simple and User-Friendly Methodology for Crystal Water Determination by Quantitative Proton NMR Spectroscopy in Deuterium Oxide.

In drug research and development, knowledge of the precise structure of an active ingredient is crucial. However, it is equally important to know the water content of the drug molecule, particularly the number of crystal waters present in its structure. Such knowledge ensures the avoidance of drug dosage and formulation errors since the number of water molecules affects the physicochemical and pharmaceutical properties of the molecule. Several methods have been used for crystal water measurements of organic compounds, of which thermogravimetry and crystallography may be the most common ones. To the best of our knowledge, solution-state NMR spectroscopy has not been used for crystal water determination in deuterium oxide. Quantitative NMR (qNMR) method will be presented in the paper with a comparison of single-crystal X-ray diffraction and thermogravimetric analysis results. The qNMR method for water content measurement is straightforward, reproducible, and accurate, including measurement of 1H NMR spectrum before and after the addition of the analyte compound, and the result can be calculated after integration of the reference compound, analyte, and HDO signals using the given equation. In practical terms, there is no need for weighing the samples under study, which makes it simple and is a clear advantage to the current determination methods. In addition, the crystal structures of two model bisphosphonates used herein are reported: that of monopotassium etidronate dihydrate and monosodium zoledronate trihydrate.

Structural Diversity in Antiosteolytic Bisphosphonates: Deciphering Structure-Activity Trends in Ultra Long Controlled Release Phenomena.

Bisphosphonate (BP)-based treatments have been extensively prescribed for bone-related conditions, particularly for osteoporosis. Their low bioavailability creates the need for prescribed dosage increase to reach therapeutic levels but generates a plethora of undesirable side effects. A viable approach to alleviating these issues is to design and exploit controlled release strategies. Herein, the controlled release profiles of 15 structurally characterized BPs (actual drugs and structural analogs) were thoroughly studied from tablets containing three (cellulose, lactose, and silica) or two (cellulose, and silica) excipients in human stomach-simulated pH conditions. The BPs were of two types, alkyl-BPs and amino-BPs. Alkyl-BPs included four derivatives of etidronate (acid, disodium, tetra-sodium, and monopotassium forms), medronic acid, and three analogs of etidronate, in which the -CH3 group was replaced by the moieties -H, -CH2CH2CH3, and -CH2CH2CH2CH2CH3. Amino-BPs included the commercial drugs pamidronate, alendronate, neridronate, and ibandronate, as well as three analog compounds. Release curves were constructed based on data taken from 1H NMR peak integration and were expressed as "% BP release" vs time. The controlled release profiles (initial release rate, plateau value, etc.) were correlated with certain structural features (number of hydrogen and metal-oxygen bonds), showing that the molecular and crystal lattice features of each BP profoundly influence its release characteristics. It was concluded that for all BPs, in general, the initial rate became lower as the total number of lattice interactions increased. For the alkyl-BPs elongation of the alkyl side chain seems to decelerate the release. Amino-BPs, in general, show slower release than the alkyl-BPs. No adverse effects of alkyl- and amino-BP drugs on NIH3T3 cell viability were noted.

Surface-Modified Silica Hydrogels for the Programmable Release of Bisphosphonate Anti-Osteoporosis Drugs: The Case of Etidronate.

Bisphosphonate drugs constitute the primary treatment for bone diseases such as Paget's disease and osteoporosis. Despite their effectiveness, they also exhibit severe drawbacks, such as rapid excretion and limited oral bioavailability. High doses are usually administered to counterbalance these drawbacks. Subsequently, side effects are triggered, such as osteonecrosis of the lower jaw and esophageal cancer. Controlled drug release systems may be viable candidates to overcome those issues. Herein, we present novel functionalized silica-based hydrogels loaded with the osteoporosis drug etidronate (1,1-hydroxyethylidene-diphosphonate) used to control the release profile of the drug. Various methodologies were evaluated to control the initial release rate and the final released concentration of the drug. These included the gel density, by systematically increasing the initial concentration of silicate used to prepare the hydrogels, the presence of metal cations (Ca2+ and Cu2+), and the internal surface functionalization of the gel with silane-based grafting agents (with anionic, cationic, and neutral groups). This study also contributes to our continuous effort to develop new a priori programmable drug-loaded gels for the controlled release of osteoporosis drugs.

Drug-Inclusive Inorganic-Organic Hybrid Systems for the Controlled Release of the Osteoporosis Drug Zoledronate.

Bisphosphonates (BPs) are common pharmaceutical treatments used for calcium- and bone-related disorders, the principal one being osteoporosis. Their antiresorptive action is related to their high affinity for hydroxyapatite, the main inorganic substituent of bone. On the other hand, the phosphonate groups on their backbone make them excellent ligands for metal ions. The combination of these properties finds potential application in the utilization of such systems as controlled drug release systems (CRSs). In this work, the third generation BP drug zoledronate (ZOL) was combined with alkaline earth metal ions (e.g., Sr2+ and Ba2+) in an effort to synthesize new materials. These metal-ZOL compounds can operate as CRSs when exposed to appropriate experimental conditions, such as the low pH of the human stomach, thus releasing the active drug ZOL. CRS networks containing Sr2+ or Ba2 and ZOL were physicochemically and structurally characterized and were evaluated for their ability to release the free ZOL drug during an acid-driven hydrolysis process. Various release and kinetic parameters were determined, such as initial rates and release plateau values. Based on the drug release results of this study, there was an attempt to correlate the ZOL release efficiency with the structural features of these CRSs.

Synthesis of the biologically important dideuterium-labelled adenosine triphosphate analogue ApppI(d 2).

The chemical synthesis of the dideuterium-labelled ATP analogue 1-adenosin-5'-yl-3-(3-methylbut-3-en-1,1-d 2-1-ol) triphosphoric acid diester (ApppI(d 2)) is described. ApppI has been reported to be an important mevalonate pathway metabolite, induced by nitrogen-containing bisphosphonates used for the treatment of several diseases related to the calcium metabolism, of which osteoporosis is the most well-known. The availability of ApppI(d 2) opens possibilities to quantitative measurements of ApppI in biological samples by mass spectrometry. The synthesized target compound ApppI(d 2) was purified by high-performance counter current chromatography and characterized by 1H, 13C, and 31P NMR spectroscopy as well as high-resolution mass spectrometry.

Real-Time On-Site Multielement Analysis of Environmental Waters with a Portable X-ray Fluorescence (pXRF) System.

Strict regulations are in place to control the effluents of mining sites and other industries. Heavy metal contamination of aquatic systems caused by leakages is difficult to mitigate as it takes time to detect and localize the leak. Dynamic sampling would drastically reduce the time to locate leakages and allow faster actions to reduce the impact on the environment. The present study introduces a novel portable multielement water analysis system to simultaneously measure Mn, Ni, Cu, Zn, Pb, and U in water samples from natural sources within 15 min from the sampling. The metals are preconcentrated from a 10 mL water sample into a nanoporous filter based on bisphosphonate-modified thermally carbonized porous silicon. The metals can be conveniently analyzed from the filter with a portable XRF analyzer in field conditions. The system was empirically calibrated for a lake water matrix with neutral pH and low alkaline metal concentration. A strong correlation between the XRF intensities and the ICP-MS results was obtained in a concentration range from 50 to 10 000 µg/L. With a DPO-2000C XRF analyzer, the detection limits were 103, 86, 92, 35, 44, and 43 µg/L for Mn, Ni, Cu, Zn, Pb, and U, respectively. The corresponding values with X-MET8000 Expert Geo were 137, 46, 62, 38, 29, and 54. The system was successfully validated with simulated multielement lake water samples and piloted in field conditions. The system provides an efficient way to monitor metals in environmental waters in cases where quick on-site results are needed.

Self-sacrificial MOFs for ultra-long controlled release of bisphosphonate anti-osteoporotic drugs.

In this paper we report drug delivery systems that are based on phosphonate MOFs. These employ biologically-acceptable metal ions (e.g. Ca2+ and Mg2+) and several anti-osteoporosis bisphosphonate drugs (etidronate, pamidronate, alendronate and neridronate), as the organic linkers. These materials have been synthesized, structurally characterized, and studied for the self-sacrificial release (by pH-driven dissolution) of the bisphosphonate active ingredient. They exhibit variable release rates and final % release, depending on the actual structure of the metal-bisphosphonate material. Their cytotoxicity profiles match those of the active ingredients.

(E)-Di-iodination of Alkynes Using Dried Dowex H+/NaI Approach.

We investigated the usefulness of the dried Dowex H+/NaI approach for the selective di-iodination of alkynes. The Dowex H+/NaI approach selectively produces only (E)-di-iodinated products; it is very straightforward and nontoxic. The utilization of 2-propanol as a solvent in the reactions can be considered as a "green" approach and the method maybe extended to radio-iodination. The method allows access to highly important building blocks. An initial example of the di-iodination and esterification in the same one-pot reaction is also presented.

Green and Efficient Esterification Method Using Dried Dowex H+/NaI Approach.

The usefulness of dried Dowex H+ cation-exchange resin with or without sodium iodide (NaI) as a catalyst system for different kinds of esterifications using carboxylic acids and alcohols as starting materials has been systematically investigated. The Dowex H+/NaI approach is very effective, generally high yielding, energy-efficient, and nontoxic, and the Dowex H+ resin is reusable. Since the whole procedure from start to product isolation is also very simple, these features make the method environmentally friendly. The method is regioselective, and its potential for separation of valuable carboxylic acids like resin acids from mixtures containing other kinds of carboxylic acids has been demonstrated. Examples for green and straightforward esterification of highly important natural amino acids are also presented.

Bisphosphonate-Generated ATP-Analogs Inhibit Cell Signaling Pathways.

Bisphosphonates are a major class of drugs used to treat osteoporosis, Paget's disease, and cancer. They have been proposed to act by inhibiting one or more targets including protein prenylation, the epidermal growth factor receptor, or the adenine nucleotide translocase. Inhibition of the latter is due to formation in cells of analogs of ATP: the isopentenyl ester of ATP (ApppI) or an AppXp-type analog of ATP, such as AMP-clodronate (AppCCl2p). We screened both ApppI as well as AppCCl2p against a panel of 369 kinases finding potent inhibition of some tyrosine kinases by AppCCl2p, attributable to formation of a strong hydrogen bond between tyrosine and the terminal phosphonate. We then synthesized bisphosphonate preprodrugs that are converted in cells to other ATP-analogs, finding low nM kinase inhibitors that inhibited cell signaling pathways. These results help clarify our understanding of the mechanisms of action of bisphosphonates, potentially opening up new routes to the development of bone resorption, anticancer, and anti-inflammatory drug leads.

Integrated analysis of isopentenyl pyrophosphate (IPP) toxicity in isoprenoid-producing Escherichia coli.

Isopentenyl pyrophosphate (IPP) toxicity presents a challenge in engineered microbial systems since its formation is unavoidable in terpene biosynthesis. In this work, we develop an experimental platform to study IPP toxicity in isoprenol-producing Escherichia coli. We first characterize the physiological response to IPP accumulation, demonstrating that elevated IPP levels are linked to growth inhibition, reduced cell viability, and plasmid instability. We show that IPP toxicity selects for pathway "breakage", using proteomics to identify a reduction in phosphomevalonate kinase (PMK) as a probable recovery mechanism. Next, using multi-omics data, we demonstrate that endogenous E. coli metabolism is globally impacted by IPP accumulation, which slows nutrient uptake, decreases ATP levels, and perturbs nucleotide metabolism. We also observe the extracellular accumulation of IPP and present preliminary evidence that IPP can be transported by E. coli, findings that might be broadly relevant for the study of isoprenoid biosynthesis. Finally, we discover that IPP accumulation leads to the formation of ApppI, a nucleotide analog of IPP that may contribute to observed toxicity phenotypes. This comprehensive assessment of IPP stress suggests potential strategies for the alleviation of prenyl diphosphate toxicity and highlights possible engineering targets for improved IPP flux and high titer isoprenoid production.

Semi-preparative high-performance countercurrent chromatography method for the purification of chemically synthesized ATP analogue, ApppI.

An efficient high-performance countercurrent chromatography (HPCCC) based method has been developed for the purification of chemically synthesized 1-adenosin-5'-yl 3-(3-methylbut-3-enyl)triphosphoric acid diester (ApppI). ApppI is an adenosine triphosphate (ATP) analogue with biological significance due to its varied actions in the body. ApppI was synthesized and purified as its tetrabutylammonium (TBA) salt and converted successfully into its more practical sodium salt form after purification. The amount of TBA hydroxide (2.0, 2.5 and 3.0 eq) used in the synthesis of ApppI was shown to exert an effect on the purification process with HPCCC and on the overall yield (8%, 16% and 22%, respectively). 1-Adenosin-5'-yl 3-(3-methylbut-3-enyl)diphosphoric acid diester (AppI) was also isolated as a side product.

Smart, programmable and responsive injectable hydrogels for controlled release of cargo osteoporosis drugs.

Easy-to-prepare drug delivery systems, based on smart, silica gels have been synthesized, characterized, and studied as hosts in the controlled release of bisphosphonates. They exhibit variable release rates and final % release, depending on the nature of bisphosphonate (side-chain length, hydro-philicity/-phobicity, water-solubility), cations present, pH and temperature. These gels are robust, injectable, re-loadable and re-usable.

Selective Calcium-Dependent Inhibition of ATP-Gated P2X3 Receptors by Bisphosphonate-Induced Endogenous ATP Analog ApppI.

Pain is the most unbearable symptom accompanying primary bone cancers and bone metastases. Bone resorptive disorders are often associated with hypercalcemia, contributing to the pathologic process. Nitrogen-containing bisphosphonates (NBPs) are efficiently used to treat bone cancers and metastases. Apart from their toxic effect on cancer cells, NBPs also provide analgesia via poorly understood mechanisms. We previously showed that NBPs, by inhibiting the mevalonate pathway, induced formation of novel ATP analogs such as ApppI [1-adenosin-5'-yl ester 3-(3-methylbut-3-enyl) triphosphoric acid diester], which can potentially be involved in NBP analgesia. In this study, we used the patch-clamp technique to explore the action of ApppI on native ATP-gated P2X receptors in rat sensory neurons and rat and human P2X3, P2X2, and P2X7 receptors expressed in human embryonic kidney cells. We found that although ApppI has weak agonist activity, it is a potent inhibitor of P2X3 receptors operating in the nanomolar range. The inhibitory action of ApppI was completely blocked in hypercalcemia-like conditions and was stronger in human than in rat P2X3 receptors. In contrast, P2X2 and P2X7 receptors were insensitive to ApppI, suggesting a high selectivity of ApppI for the P2X3 receptor subtype. NBP, metabolite isopentenyl pyrophosphate, and endogenous AMP did not exert any inhibitory action, indicating that only intact ApppI has inhibitory activity. Ca2+-dependent inhibition was stronger in trigeminal neurons preferentially expressing desensitizing P2X3 subunits than in nodose ganglia neurons, which also express nondesensitizing P2X2 subunits. Altogether, we characterized previously unknown purinergic mechanisms of NBP-induced metabolites and suggest ApppI as the endogenous pain inhibitor contributing to cancer treatment with NBPs.

Synthesis of a Biologically Important Adenosine Triphosphate Analogue, ApppD.

The chemical synthesis of a adenosine triphosphate analogue, 1-adenosin-5'-yl 3-(3-methylbut-2-enyl) triphosphoric acid diester (ApppD), is described. ApppD is known to be an active metabolite of the mevalonate pathway in the human body like its structural isomer isopentenyl ester of ATP (ApppI). Very recently, ApppI has been found to possess novel function(s); now it will also be possible to examine the effects of ApppD more precisely because it can be synthesized in reasonable amounts. 1-Adenosin-5'-yl 3-(3-methylbut-2-enyl) diphosphoric acid diester (AppD; a adenosine diphosphate analogue) was also isolated from the synthesis mixture. Both ApppD and AppD were characterized by 1H, 13C, 31P NMR and mass spectrometry methods.

Correction to "Synthesis of a Biologically Important Adenosine Triphosphate Analogue, ApppD".

[This corrects the article DOI: 10.1021/acsomega.7b00531.].

Synthesis of medronic acid monoesters and their purification by high-performance countercurrent chromatography or by hydroxyapatite.

We achieved the synthesis of important medronic acid monoalkyl esters via the dealkylation of mixed trimethyl monoalkyl esters of medronic acid. Two methods were developed for the purification of medronic acid monoesters: 1) small scale (10-20 mg) purification by using hydroxyapatite and 2) large scale (tested up to 140 mg) purification by high-performance countercurrent chromatography (HPCCC).

Two strategies for the synthesis of the biologically important ATP analogue ApppI, at a multi-milligram scale.

Two strategies for the synthesis of the ATP (adenosine triphosphate) analogue ApppI [1-adenosin-5'-yl 3-(3-methylbut-3-enyl)triphosphoric acid diester] (1) are described. ApppI is an active metabolite of the mevalonate pathway and thus is of major biological significance. Chemically synthezised ApppI was purified by using triethylammonium bicarbonate as the counter ion in ion-pair chromatography and characterized by (1)H, (13)C, (31)P NMR and MS spectroscopical methods.