Cloning and expression heterologous alanine dehydrogenase genes: Investigation of reductive amination potential of L-alanine dehydrogenases for green synthesis of alanine derivatives.

Unnatural amino acids (UAAs) offer significant promise in a wide range of applications, including drug discovery, the custom design of peptides and proteins, and their utility and use as markers for monitoring molecular interactions in biological research. The synthesis of UAAs presents a formidable challenge and can be classified into two primary categories: enzymatic and chemical synthesis. Notably, the enzymatic route, specifically asymmetric synthesis, emerges as a an attractive method for procuring enantiopure UAAs with high efficiency, owing to its streamlined and concise reaction mechanism. The current study investigated the reductive amination activity mechanisms of alanine dehydrogenase (L-AlaDH), sourced from a combination of newly and previously characterized microorganisms. Our principal aim was to evaluate the catalytic efficiency of these L-AlaDH enzymes concerning a range of specific ketoacids and pyruvate to ascertain their capability for facilitating the production of both natural and unnatural amino acids. After the characterization processes, mutation points for TtAlaDH were determined and as a result of the mutations, mutants that could use ketocaproate and ketovalerate more effectively than the wild type were obtained. Among the enzymes studied, MetAlaDH exhibited the highest specific activity against pyruvate, 173 U/mg, and a KM value of 1.3 mM. VlAlaDH displayed the most favourable catalytic efficiency with a rate constant of 170 s-1mM-1. On the other hand, AfAlaDH demonstrated the highest catalytic efficiency against α-ketobutyrate (34.0 s-1mM-1) and α-ketovalerate (2.7 s-1mM-1). Of the enzymes investigated in the study, TtAlaDH exhibited the highest effectiveness among bacterial enzymes in catalyzing ketocaproate with a measured catalytic efficiency of about 0.6 s-1mM-1 and a KM value of approximately 0.3 mM. These findings provide valuable insights into the substrate specificity and catalytic performance of L-AlaDHs, enhancing our understanding of their potential applications in various biocatalytic processes.

Application of reductive amination by heterologously expressed Thermomicrobium roseumL-alanine dehydrogenase to synthesize L-alanine derivatives.

Unnatural amino acids are unique building blocks in modern medicinal chemistry as they contain an amino and a carboxylic acid functional group, and a variable side chain. Synthesis of pure unnatural amino acids can be made through chemical modification of natural amino acids or by employing enzymes that can lead to novel molecules used in the manufacture of various pharmaceuticals. The NAD+ -dependent alanine dehydrogenase (AlaDH) enzyme catalyzes the conversion of pyruvate to L-alanine by transferring ammonium in a reversible reductive amination activity. Although AlaDH enzymes have been widely studied in terms of oxidative deamination activity, reductive amination activity studies have been limited to the use of pyruvate as a substrate. The reductive amination potential of heterologously expressed, highly pure Thermomicrobium roseum alanine dehydrogenase (TrAlaDH) was examined with regard to pyruvate, α-ketobutyrate, α-ketovalerate and α-ketocaproate. The biochemical properties were studied, which included the effects of 11 metal ions on enzymatic activity for both reactions. The enzyme accepted both derivatives of L-alanine (in oxidative deamination) and pyruvate (in reductive amination) as substrates. While the kinetic KM values associated with the pyruvate derivatives were similar to pyruvate values, the kinetic kcat values were significantly affected by the side chain increase. In contrast, KM values associated with the derivatives of L-alanine (L-α-aminobutyrate, L-norvaline, and L-norleucine) were approximately two orders of magnitude greater, which would indicate that they bind very poorly in a reactive way to the active site. The modeled enzyme structure revealed differences in the molecular orientation between L-alanine/pyruvate and L-norleucine/α-ketocaproate. The reductive activity observed would indicate that TrAlaDH has potential for the synthesis of pharmaceutically relevant amino acids.

Hijacking the human complement inhibitor C4b-binding protein by the sporozoite stage of the Plasmodium falciparum parasite.

The complement system is considered the first line of defense against pathogens. Hijacking complement regulators from blood is a common evasion tactic of pathogens to inhibit complement activation on their surfaces. Here, we report hijacking of the complement C4b-binding protein (C4bp), the regulator of the classical and lectin pathways of complement activation, by the sporozoite (SPZ) stage of the Plasmodium falciparum parasite. This was shown by direct binding of radiolabeled purified C4bp to live SPZs as well as by binding of C4bp from human serum to SPZs in indirect immunofluorescence assays. Using a membrane-bound peptide array, peptides from the N-terminal domain (NTD) of P. falciparum circumsporozoite protein (CSP) were found to bind C4bp. Soluble biotinylated peptide covering the same region on the NTD and a recombinantly expressed NTD also bound C4bp in a dose-dependent manner. NTD-binding site on C4bp was mapped to the CCP1-2 of the C4bp α-chain, a common binding site for many pathogens. Native CSP was also co-immunoprecipitated with C4bp from human serum. Preventing C4bp binding to the SPZ surface negatively affected the SPZs gliding motility in the presence of functional complement and malaria hyperimmune IgG confirming the protective role of C4bp in controlling complement activation through the classical pathway on the SPZ surface. Incorporating the CSP-C4bp binding region into a CSP-based vaccine formulation could induce vaccine-mediated immunity that neutralizes this immune evasion region and increases the vaccine efficacy.

Enhanced activity of hyperthermostable Pyrococcus horikoshii endoglucanase in superbase ionic liquids.

OBJECTIVES: Ionic liquids (ILs) that dissolve biomass are harmful to the enzymes that degrade lignocellulose. Enzyme hyperthermostability promotes a tolerance to ILs. Therefore, the limits of hyperthemophilic Pyrococcus horikoschii endoglucanase (PhEG) to tolerate 11 superbase ILs were explored. RESULTS: PhEG was found to be most tolerant to 1-ethyl-3-methylimidazolium acetate ([EMIM]OAc) in soluble 1% carboxymethylcellulose (CMC) and insoluble 1% Avicel substrates. At 35% concentration, this IL caused an increase in enzyme activity (up to 1.5-fold) with CMC. Several ILs were more enzyme inhibiting with insoluble Avicel than with soluble CMC. Km increased greatly in the presence ILs, indicating significant competitive inhibition. Increased hydrophobicity of the IL cation or anion was associated with the strongest enzyme inhibition and activation. Surprisingly, PhEG activity was increased 2.0-2.5-fold by several ILs in 4% substrate. Cations exerted the main role in competitive inhibition of the enzyme as revealed by their greater binding energy to the active site. CONCLUSIONS: These results reveal new ways to design a beneficial combination of ILs and enzymes for the hydrolysis of lignocellulose, and the strong potential of PhEG in industrial, high substrate concentrations in aqueous IL solutions.

High-temperature behavior of hyperthermostable Thermotoga maritima xylanase XYN10B after designed and evolved mutations.

A hyperthermostable xylanase XYN10B from Thermotoga maritima (PDB code 1VBR, GenBank accession number KR078269) was subjected to site-directed and error-prone PCR mutagenesis. From the selected five mutants, the two site-directed mutants (F806H and F806V) showed a 3.3-3.5-fold improved enzyme half-life at 100 °C. The mutant XYNA generated by error-prone PCR showed slightly improved stability at 100 °C and a lower Km. In XYNB and XYNC, the additional mutations over XYNA decreased the thermostability and temperature optimum, while elevating the Km. In XYNC, two large side-chains were introduced into the protein's interior. Micro-differential scanning calorimetry (DSC) showed that the melting temperature (Tm) dropped in XYNB and XYNC from 104.9 °C to 93.7 °C and 78.6 °C, respectively. The detrimental mutations showed that extremely thermostable enzymes can tolerate quite radical mutations in the protein's interior and still retain high thermostability. The analysis of mutations (F806H and F806V) in a hydrophobic area lining the substrate-binding region indicated that active site hydrophobicity is important for high activity at extreme temperatures. Although polar His at 806 provided higher stability, the hydrophobic Phe at 806 provided higher activity than His. This study generates an understanding of how extreme thermostability and high activity are formed in GH10 xylanases. KEY POINTS: • Characterization and molecular dynamics simulations of TmXYN10B and its mutants • Explanation of structural stability of GH10 xylanase.

The challenges of using NAD+-dependent formate dehydrogenases for CO2 conversion.

In recent years, CO2 reduction and utilization have been proposed as an innovative solution for global warming and the ever-growing energy and raw material demands. In contrast to various classical methods, including chemical, electrochemical, and photochemical methods, enzymatic methods offer a green and sustainable option for CO2 conversion. In addition, enzymatic hydrogenation of CO2 into platform chemicals could be used to produce economically useful hydrogen storage materials, making it a win-win strategy. The thermodynamic and kinetic stability of the CO2 molecule makes its utilization a challenging task. However, Nicotine adenine dinucleotide (NAD+)-dependent formate dehydrogenases (FDHs), which have high selectivity and specificity, are attractive catalysts to overcome this issue and convert CO2 into fuels and renewable chemicals. It is necessary to improve the stability, cofactor necessity, and CO2 conversion efficiency of these enzymes, such as by combining them with appropriate hybrid systems. However, metal-independent, NAD+-dependent FDHs, and their CO2 reduction activity have received limited attention to date. This review outlines the CO2 reduction ability of these enzymes as well as their properties, reaction mechanisms, immobilization strategies, and integration with electrochemical and photochemical systems for the production of formic acid or formate. The biotechnological applications of FDH, future perspectives, barriers to CO2 reduction with FDH, and aspects that must be further developed are briefly summarized. We propose that constructing hybrid systems that include NAD+-dependent FDHs is a promising approach to convert CO2 and strengthen the sustainable carbon bio-economy.

Whole-genome sequencing of two Streptomyces strains isolated from the sand dunes of Sahara.

BACKGROUND: Sahara is one of the largest deserts in the world. The harsh climatic conditions, especially high temperature and aridity lead to unique adaptation of organisms, which could be a potential source of new metabolites. In this respect, two Saharan soils from El Oued Souf and Beni Abbes in Algeria were collected. The bacterial isolates were selected by screening for antibacterial, antifungal, and enzymatic activities. The whole genomes of the two native Saharan strains were sequenced to study desert Streptomyces microbiology and ecology from a genomic perspective. RESULTS: Strains Babs14 (from Beni Abbes, Algeria) and Osf17 (from El Oued Souf, Algeria) were initially identified by 16S rRNA sequencing as belonging to the Streptomyces genus. The whole genome sequencing of the two strains was performed using Pacific Biosciences Sequel II technology (PacBio), which showed that Babs14 and Osf17 have a linear chromosome of 8.00 Mb and 7.97 Mb, respectively. The number of identified protein coding genes was 6910 in Babs14 and 6894 in Osf17. No plasmids were found in Babs14, whereas three plasmids were detected in Osf17. Although the strains have different phenotypes and are from different regions, they showed very high similarities at the DNA level. The two strains are more similar to each other than either is to the closest database strain. The search for potential secondary metabolites was performed using antiSMASH and predicted 29 biosynthetic gene clusters (BGCs). Several BGCs and proteins were related to the biosynthesis of factors needed in response to environmental stress in temperature, UV light and osmolarity. CONCLUSION: The genome sequencing of Saharan Streptomyces strains revealed factors that are related to their adaptation to an extreme environment and stress conditions. The genome information provides tools to study ecological adaptation in a desert environment and to explore the bioactive compounds of these microorganisms. The two whole genome sequences are among the first to be sequenced for the Streptomyces genus of Algerian Sahara. The present research was undertaken as a first step to more profoundly explore the desert microbiome.

Effect of Metal Ions on the Activity of Ten NAD-Dependent Formate Dehydrogenases.

NAD-dependent formate dehydrogenase (FDH) enzymes are frequently used in industrial and scientific applications. FDH is a reversible enzyme that reduces the NAD molecule to NADH and produces CO2 by oxidation of the formate ion, whereas it causes CO2 reduction in the reverse reaction. Some transition metal elements - Fe3+, Mo6+ and W6 + - can be found in the FDH structure of anaerobic and archaeal microorganisms, and these enzymes require cations and other redox-active cofactors for their FDH activity. While NAD-dependent FDHs do not necessarily require any metal cations, the presence of various metal cations can still affect FDH activities. To study the effect of 11 different metal ions, NAD-dependent FDH enzymes from ten different microorganisms were tested: Ancylobacter aquaticus (AaFDH), Candida boidinii (CboFDH), Candida methylica (CmFDH), Ceriporiopsis subvermispora (CsFDH), Chaetomium thermophilum (CtFDH), Moraxella sp. (MsFDH), Myceliophthora thermophila (MtFDH), Paracoccus sp. (PsFDH), Saccharomyces cerevisiae (ScFDH) and Thiobacillus sp. (TsFDH). It was found that metal ions (mainly Cu2+ and Zn2+) could have quite strong inhibition effects on several enzymes in the forward reaction, whereas several cations (Li+, Mg2+, Mn2+, Fe3+ and W6+) could increase the forward reaction of two FDHs. The highest activity increase (1.97 fold) was caused by Fe3+ in AaFDH. The effect on the reverse reaction was minimal. The modelled structures of ten FDHs showed that the active site is formed by 15 highly conserved amino acid residues spatially settling around the formate binding site in a conserved way. However, the residue differences at some of the sites close to the substrate do not explain the activity differences. The active site space is very tight, excluding water molecules, as observed in earlier studies. Structural examination indicated that smaller metal ions might be spaced close to the active site to affect the reaction. Metal ion size showed partial correlation to the effect on inhibition or activation. Affinity of the substrate may also affect the sensitivity to the metal's effect. In addition, amino acid differences on the protein surface may also be important for the metal ion effect.

Engineered formate dehydrogenase from Chaetomium thermophilum, a promising enzymatic solution for biotechnical CO2 fixation.

OBJECTIVES: Formate dehydrogenases (FDHs) are NAD(P)H-dependent enzymes that catalyse the reversible oxidation of formate to CO2. The main goal was to use directed evolution to obtain variants of the FDH from Chaetomium thermophilum (CtFDH) with enhanced reduction activity in the conversion of CO2 into formic acid. RESULTS: Four libraries were constructed targeting five residues in the active site. We identified two variants (G93H/I94Y and R259C) with enhanced reduction activity which were characterised in the presence of both aqueous CO2(g) and HCO3-. The A1 variant (G93H/I94Y) showed a 5.4-fold increase in catalytic efficiency (kcat/KM) compared to that of the wild-type for HCO3- reduction. The improved biocatalysts were also applied as a coupled cofactor recycling system in the enantioselective oxidation of 4-phenyl-2-propanol catalysed by the alcohol dehydrogenase from Streptomyces coelicolor A3 (ScADH). Conversions in these reactions increased from 56 to 91% when the A1 variant was used instead of wild-type CtFDH. CONCLUSIONS: Two variants presenting up to five-fold increase in catalytic efficiency and kcat were obtained and characterised. They constitute a promising enzymatic alternative for CO2 utilization and will serve as scaffolds to be further developed in order to meet industrial requirements.

Amino acid-functionalized carbon nanotube framework as a biomimetic catalyst for cleavage of glycosidic bonds.

In this work, carbon nanotubes (CNTs) functionalized by acidic amino acids were used as a framework, which aims to form a mimetic structure of an active site of the glycoside hydrolases. It was demonstrated that the glycosidic bonds of the disaccharides were cleaved by the fabricated biofunctionalized CNTs. It was implied that the number of carboxyl groups and their individual pKa values in the amino acids, and the distance between the NH2 and the side chain carboxyl groups of the amino acid are predominant factors for determining the reaction efficiency and the optimum pH. It was suggested that glutamic acid functionalized CNTs framework showed the highest efficiency in the cleavage of glycosidic bond of cellobiose than other acidic biomolecules. It was also suggested that the glutamic acid functionalized CNT framework showed preference to the types of glycosidic bonds in the following order: ß-1,2-glycoside > ß-1,4-glycoside > α-1,4-glycoside [Formula: see text] α-1,1-glycoside bond.

Functional effects of active site mutations in NAD+-dependent formate dehydrogenases on transformation of hydrogen carbonate to formate.

Conversion of hydrogen carbonate to formate by mutants of Candida methylica (CmFDH) and Chaetomium thermophilum (CtFDH) formate dehydrogenases (FDHs) was studied. Hydrogen carbonate is not the primary substrate for the hydride transfer reaction in FDHs. The chosen mutations were selected so that enzyme activity could remain at an adequate level. In CtFDH, the mutation Asn120Cys in the active site inactivated the enzyme for formate (oxidation) but increased the specific activity for hydrogen carbonate (reduction) as a function of substrate concentration. The mutation Asn120Cys in CtFDH increased 6.5-fold the KM, indicating that substrate binding was weakened. A 6.5-fold increase of kcat compensated the lower affinity suggesting that product release was improved. The corresponding mutation Asn119Cys in CmFDH inactivated the enzyme for both substrates. Molecular dynamics simulations indicated that the active site dimensions change differently with different substrates after mutations, and in the mutant Asn120Cys of CtFDH, hydrogen carbonate adopted better reactive position than formate. With hydrogen carbonate, the active site enlarged enough for two hydrogen carbonate molecules to be placed there. The change of Asn119 to bulky Tyr or His in CmFDH requires changes in the active site to accommodate the substrate; activity with formate was retained but not with hydrogen carbonate. This study showed that the active site of FDHs can be modified radically, which gives possibilities for further enzyme engineering to improve the reaction with hydrogen carbonate or carbon dioxide for enzymatic fixing of carbon dioxide.

Characterization of natural habitats and diversity of Libyan desert truffles.

Desert truffles have traditionally been used as food in Libya. Desert truffle grows and gives fruit sporadically when adequate and properly distributed rainfall occurs with existence of suitable soil and mycorrhizal host plant. The present study aimed to identify and characterize two kinds of wild desert truffles from ecological and nutritional points that were collected from the studied area. The truffle samples were identified as Terfezia (known as red or black truffle) and Tirmania (known as white truffle). The nutritional values (protein, lipid and carbohydrate) of both Libyan wild truffle (Terfezia and Tirmania) were determined on a dry weight basis and result showed that Tirmania and Terfezia contained 16.3 and 18.5% protein, 6.2 and 5.9% lipid, 67.2 and 65% carbohydrate, respectively, in ascocarp biomass. The soil pH of the upper and lower regions of the Hamada Al-Hamra ranged between 8.2 and 8.5 giving suitable conditions for fructification. The plants, Helianthemum kahiricum and Helianthemum lippii were the dominant plants in Hamada Al-Hamra region found to form a mycorrhiza with desert truffles. The phylogenetic analysis of the genomic rDNA ITS region showed that, out of five collections three represented Tirmania pinoyi (Maire) Malencon, one Tirmania nivea (Desf.) Trappe, and one Terfezia boudieri Chatin.

Chaetomium thermophilum formate dehydrogenase has high activity in the reduction of hydrogen carbonate (HCO3 -) to formate.

While formate dehydrogenases (FDHs) have been used for cofactor recycling in chemoenzymatic synthesis, the ability of FDH to reduce CO2 could also be utilized in the conversion of CO2 to useful products via formate (HCOO-). In this study, we investigated the reduction of CO2 in the form of hydrogen carbonate (HCO3-) to formate by FDHs from Candida methylica (CmFDH) and Chaetomium thermophilum (CtFDH) in a NADH-dependent reaction. The catalytic performance with HCO3- as a substrate was evaluated by measuring the kinetic rates and conducting productivity assays. CtFDH showed a higher efficiency in converting HCO3- to formate than CmFDH, whereas CmFDH was better in the oxidation of formate. The pH optimum of the reduction was at pH 7-8. However, the high concentrations of HCO3- reduced the reaction rate. CtFDH was modeled in the presence of HCO3- showing that it fits to the active site. The active site setting for hydride transfer in CO2 reduction was modeled. The hydride donated by NADH would form a favorable contact to the carbon atom of HCO3-, resulting in a surplus of electrons within the molecule. This would cause the complex formed by hydrogen carbonate and the hydride to break into formate and hydroxide ions.

Biochemical Characterization of Extracellular Cellulase from Tuber maculatum Mycelium Produced Under Submerged Fermentation.

Interaction of truffle mycelium with the host plant involves the excretion of extracellular enzymes. The ability of Tuber maculatum mycelium to produce an extracellular cellulase during submerged fermentation was demonstrated for the first time. T. maculatum mycelia were isolated and tested for extracellular cellulase production at variable pH on solid agar medium, and the highest activity was observed at pH 7.0. Furthermore, T. maculatum was subjected to submerged fermentation in basal salt medium for cellulase production. Under optimized conditions using sodium carboxymethyl cellulose (0.5 % w/v) as carbon source and an initial pH of 7.0, the enzyme production yielded 1.70 U/mL of cellulase in the cell-free supernatant after 7 days of incubation time. The optimum of the obtained cellulase's activity was at pH 5.0 and a temperature of 50 °C. The enzyme showed good thermostability at 50 °C by retaining 99 % of its maximal activity over an incubation time of 100 min. The cellulase activity was inhibited by Fe2+ and slightly activated by Mn2+ and Cu2+ at 1 mM concentration. The results indicated that truffle mycelium is utilizing cellulosic energy source in the root system, and the optimal conditions are those existing in the acidic Finnish soil.

High stability and low competitive inhibition of thermophilic Thermopolyspora flexuosa GH10 xylanase in biomass-dissolving ionic liquids.

Thermophilic Thermopolyspora flexuosa GH10 xylanase (TfXYN10A) was studied in the presence of biomass-dissolving hydrophilic ionic liquids (ILs) [EMIM]OAc, [EMIM]DMP and [DBNH]OAc. The temperature optimum of TfXYN10A with insoluble xylan in the pulp was at 65-70 °C, with solubilised 1 % xylan at 70-75 °C and with 3 % xylan at 75-80 °C. Therefore, the amount of soluble substrate affects the enzyme activity at high temperatures. The experiments with ILs were done with 1 % substrate. TfXYN10A can partially hydrolyse soluble xylan even in the presence of 40 % (v/v) ILs. Although ILs decrease the apparent temperature optimum, a surprising finding was that at the inactivating temperatures (80-90 °C), especially [EMIM]OAc increases the stability of TfXYN10A indicating that the binding of IL molecules strengthens the protein structure. Earlier kinetic studies showed an increased K m with ILs, indicating that ILs function as competitive inhibitors. TfXYN10A showed low increase of K m, which was 2-, 3- and 4-fold with 15 % [EMIM]OAc, [DBNH]OAc and [EMIM]DMP, respectively. One reason for the low competitive inhibition could be the high affinity to the substrate (low K m). Xylanases with low K m (~1 mg/mL) appear to show higher tolerance to ILs than xylanases with higher K m (~2 mg/mL). Capillary electrophoresis showed that TfXYN10A hydrolyses xylan to the end-products in 15-35 % ILs practically as completely as without IL, also indicating good binding of the short substrate molecules by TfXYN10A despite of major apparent IL binding sites above the catalytic residues. Substrate binding interactions in the active site appear to explain the high tolerance of TfXYN10A to ILs.

Hyperthermostable Thermotoga maritima xylanase XYN10B shows high activity at high temperatures in the presence of biomass-dissolving hydrophilic ionic liquids.

The gene of Thermotoga maritima GH10 xylanase (TmXYN10B) was synthesised to study the extreme limits of this hyperthermostable enzyme at high temperatures in the presence of biomass-dissolving hydrophilic ionic liquids (ILs). TmXYN10B expressed from Pichia pastoris showed maximal activity at 100 °C and retained 92 % of maximal activity at 105 °C in a 30-min assay. Although the temperature optimum of activity was lowered by 1-ethyl-3-methylimidazolium acetate ([EMIM]OAc), TmXYN10B retained partial activity in 15-35 % hydrophilic ILs, even at 75-90 °C. TmXYN10B retained over 80 % of its activity at 90 °C in 15 % [EMIM]OAc and 15-25 % 1-ethyl-3-methylimidazolium dimethylphosphate ([EMIM]DMP) during 22-h reactions. [EMIM]OAc may rigidify the enzyme and lower V max. However, only minor changes in kinetic parameter K m showed that competitive inhibition by [EMIM]OAc of TmXYN10B is minimal. In conclusion, when extended enzymatic reactions under extreme conditions are required, TmXYN10B shows extraordinary potential.

New Insights into the Role of T3 Loop in Determining Catalytic Efficiency of GH28 Endo-Polygalacturonases.

Intramolecular mobility and conformational changes of flexible loops have important roles in the structural and functional integrity of proteins. The Achaetomium sp. Xz8 endo-polygalacturonase (PG8fn) of glycoside hydrolase (GH) family 28 is distinguished for its high catalytic activity (28,000 U/mg). Structure modeling indicated that PG8fn has a flexible T3 loop that folds partly above the substrate in the active site, and forms a hydrogen bond to the substrate by a highly conserved residue Asn94 in the active site cleft. Our research investigates the catalytic roles of Asn94 in T3 loop which is located above the catalytic residues on one side of the substrate. Molecular dynamics simulation performed on the mutant N94A revealed the loss of the hydrogen bond formed by the hydroxyl group at O34 of pentagalacturonic acid and the crucial ND2 of Asn94 and the consequent detachment and rotation of the substrate away from the active site, and that on N94Q caused the substrate to drift away from its place due to the longer side chain. In line with the simulations, site-directed mutagenesis at this site showed that this position is very sensitive to amino acid substitutions. Except for the altered Km values from 0.32 (wild type PG8fn) to 0.75-4.74 mg/ml, all mutants displayed remarkably lowered kcat (~3-20,000 fold) and kcat/Km (~8-187,500 fold) values and significantly increased △(△G) values (5.92-33.47 kJ/mol). Taken together, Asn94 in the GH28 T3 loop has a critical role in positioning the substrate in a correct way close to the catalytic residues.

Enhancement of acetyl xylan esterase activity on cellulose acetate through fusion to a family 3 cellulose binding module.

The current study investigates the potential to increase the activity of a family 1 carbohydrate esterase on cellulose acetate through fusion to a family 3 carbohydrate binding module (CBM). Specifically, CtCBM3 from Clostridium thermocellum was fused to the carboxyl terminus of the acetyl xylan esterase (AnAXE) from Aspergillus nidulans, and active forms of both AnAXE and AnAXE-CtCBM3 were produced in Pichia pastoris. CtCBM3 fusion had negligible impact on the thermostability or regioselectivity of AnAXE; activities towards acetylated corncob xylan, 4-methylumbelliferyl acetate, p-nitrophenyl acetate, and cellobiose octaacetate were also unchanged. By contrast, the activity of AnAXE-CtCBM3 on cellulose acetate increased by two to four times over 24 h, with greater differences observed at earlier time points. Binding studies using microcrystalline cellulose (Avicel) and a commercial source of cellulose acetate confirmed functional production of the CtCBM3 domain; affinity gel electrophoresis using acetylated xylan also verified the selectivity of CtCBM3 binding to cellulose. Notably, gains in enzyme activity on cellulose acetate appeared to exceed gains in substrate binding, suggesting that fusion to CtCBM3 increases functional associations between the enzyme and insoluble, high molecular weight cellulosic substrates.

Stability and activity of Dictyoglomus thermophilum GH11 xylanase and its disulphide mutant at high pressure and temperature.

The functional properties of extremophilic Dictyoglomus thermophilum xylanase (XYNB) and the N-terminal disulphide-bridge mutant (XYNB-DS) were studied at high pressure and temperature. The enzymes were quite stable even at the pressure of 500MPa at 80°C. The half-life of inactivation in these conditions was over 30h. The inactivation at 80°C in atmospheric pressure was only 3-times slower. The increase of pressure up to 500MPa at 80°C decreased only slightly the enzyme's stability, whereas in 500MPa the increase of temperature from 22 to 80°C decreased significantly more the enzyme's stability. While the high temperature (80-100°C) decreased the enzyme reaction with short xylooligosaccharides (xylotetraose and xylotriose), the high pressure (100-300MPa) had an opposite effect. The temperature of 100°C strongly increased the Km but did not affect the kcat to the same extent, thus indicating that the interaction of the substrate with the active site suffers before the catalytic reaction begins to decrease as the temperature rises. Circular dichroism spectroscopy showed the high structural stability of XYNB and XYNB-DS at 93°C.

Effect of acidic amino acids engineered into the active site cleft of Thermopolyspora flexuosa GH11 xylanase.

Thermopolyspora flexuosa GH11 xylanase (XYN11A) shows optimal activity at pH 6-7 and 75-80 °C. We studied how mutation to aspartic acid (N46D and V48D) in the vicinity of the catalytic acid/base affects the pH activity of highly thermophilic GH11 xylanase. Both mutations shifted the pH activity profile toward acidic pH. In general, the Km values were lower at pH 4-5 than at pH 6, and in line with this, the rate of hydrolysis of xylotetraose was slightly faster at pH 4 than at pH 6. The N46D mutation and also lower pH in XYN11A increased the hydrolysis of xylotriose. The Km value increased remarkably (from 2.5 to 11.6 mg/mL) because of V48D, which indicates the weakening of binding affinity of the substrate to the active site. Xylotetraose functioned well as a substrate for other enzymes, but with lowered reaction rate for V48D. Both N46D and V48D increased the enzyme inactivation by ionic liquid [emim]OAc. In conclusion, the pH activity profile could be shifted to acidic pH due to an effect from two different directions, but the tightly packed GH11 active site can cause steric problems for the mutations.