A Novel Monochromatic Light to Detect Target Specimens Within Endoscopic Ultrasonography-guided Fine-needle Aspiration Biopsy Samples.

BACKGROUND/AIM: Endoscopic ultrasonography (EUS)-guided fine-needle aspiration biopsy (EUS-FNB) enhances the diagnostic capabilities of EUS by providing additional pathological samples. However, detecting the target specimens within the collected samples can be challenging. The aim of this study was to determine the optimal wavelength of light for detection of target specimens within EUS-FNB samples in an animal experiment. MATERIALS AND METHODS: EUS-FNB pancreatic tissue samples were collected from a male beagle (weight, 10 kg), and the samples were illuminated with monochromatic light ranging from 430 to 700 nm in 5-nm intervals. The intensities of the target specimen and blood samples were analyzed using the densitometry of the images obtained through irradiation. RESULTS: We found that transmitted monochromatic light of 605 nm most vividly enhanced the contrast between the target specimens and blood in the samples in the impression of appearance. CONCLUSION: Thus, microscopical observations under transmitted light of 605 nm are optimal for target tissue identification within EUS-FNB samples.

Clinical availability of eye movement during reading.

Eyes provide valuable information for neurological diagnosis. So far, the use of diagnostic devices to analyze eye movement is limited. We explored whether the analysis of eye movements can be efficacious. Patients with Parkinson's disease (PD) (n = 29), spinocerebellar degeneration (SCD) (21), progressive supranuclear palsy (PSP) (19), and control individuals (19) participated in this study. The patients read aloud two sets of sentences displayed on a monitor: one was displayed horizontally, and the other vertically. Parameters such as eye movement speed, travel distance, and fixation/saccade ratio were extracted, and comparisons between groups were performed. Maneuvers of eye movements were also subjected to image classification using deep learning. Reading velocity and fixation/saccade ratio were altered in the PD group, and the SCD group exhibited ineffective eye movements due to dysmetria and nystagmus. Vertical gaze parameters showed aberrant values in the PSP group. Vertical written sentences were more sensitive than horizontal ones in detecting these abnormalities. In the regression analysis, vertical reading indicated a high accuracy in identifying each group. The machine learning analysis showed more than 90 % accuracy in distinguishing between the control and SCD groups and between the SCD and PSP groups. Analyzing eye movements is useful and easily applicable.

Estimating age at death by Hausdorff distance analyses of the fourth lumbar vertebral bodies using 3D postmortem CT images.

The existing methods for determining adult age from human skeletons are mostly qualitative. However, a shift in quantifying age-related skeletal morphology on a quantitative scale is emerging. This study describes an intuitive variable extraction technique and quantifies skeletal morphology in continuous data to understand their aging pattern. A total of 200 postmortem CT images from the deceased aged 25-99 years (130 males, 70 females) who underwent forensic death investigations were used in the study. The 3D volume of the fourth lumbar vertebral body was segmented, smoothed, and post-processed using the open-source software ITK-SNAP and MeshLab, respectively. To measure the extent of 3D shape deformity due to aging, the Hausdorff distance (HD) analysis was performed. In our context, the maximum Hausdorff distance (maxHD) was chosen as a metric, which was subsequently studied for its correlation with age at death. A strong statistically significant positive correlation (P < 0.001) between maxHD and age at death was observed in both sexes (Spearman's rho = 0.742, male; Spearman's rho = 0.729, female). In simple linear regression analyses, the regression equations obtained yielded the standard error of estimates of 12.5 years and 13.1 years for males and females, respectively. Our study demonstrated that age-related vertebral morphology could be described using the HD method. Moreover, it encourages further studies with larger sample sizes and on other population backgrounds to validate the methodology.

A novel method to estimate adult age from the lumbar vertebral body using 3D PMCT images in Japanese.

This study evaluated the age-related changes in the vertebral body using 3D Postmortem CT (PMCT) images and proposed an alternative age estimation formula. The PMCT images of 200 deceased individuals aged 25 to 99 years (126 males, 74 females) were retrospectively reviewed and included in the study. Using the open-source software ITK-SNAP and MeshLab, a 3D surface mesh of the fourth lumbar vertebral body (L4) and its convex hull models were created from the PMCT data. Using their inbuilt tools, volumes (in mm3) of the L4 surface mesh and convex hull models were subsequently computed. We derived VD, defined as the difference in volumes between the convex hull and L4 surface mesh normalized by L4 mesh volume, and VR, defined as the ratio of L4 mesh volume to convex hull volume based on individual L4. Correlation and regression analyses were performed between VD, VR, and chronological age. A statistically significant positive correlation (P < 0.001) between chronological age and VD, (rs = 0.764, males; rs = 0.725, females), and a significant negative correlation between chronological age and VR (rs = -0.764, males; rs = -0.725, females) was obtained in both sexes. The lowest standard error of the estimate was demonstrated by the VR at 11.9 years and 12.5 years for males and females, respectively. As such, their regression models to estimate adult age were Age = 248.9-2.5VR years, males; Age = 258.1-2.5VR years, females. These regression equations may be useful for estimating age in Japanese adults in forensic settings.

The Influence of Illumination Color on the Subjective Visual Recognition of Biological Specimens.

BACKGROUND: Visual examination by the naked eye is integral to medical diagnosis and surgery. The illumination in conditioned color is widely used for visual inspection in the industry but has not been introduced to the biomedical context. The color that can enhance the visual recognition of individual tissues is still unknown. Therefore, we carried out a visual recognition experiment on biological specimens to determine the subjective preference for illumination color based on questionnaires. METHODS: Twenty healthy subjects were asked to compare the visual recognizability of several rat tissues between the illuminations in test colors and white. The rats were anesthetized, and the femoral vein and abdominal cavity were exposed. Seven tissues were selected for a visual recognition test. Illumination was generated using a multi-color LED light. The subjects observed the tissues under the illuminations of white and one of the test colors alternately and reported which illumination is suitable for visual recognition using a questionnaire. RESULTS: The analysis of the questionnaires showed that the blue test color was more effective than white illumination in the visual recognition of fine structures such as the branching of blood vessels and nerves, and red illumination disturbed the visual recognizability of the same tissues. On the other hand, the red but not the blue illumination improved the visual recognizability of the vein beneath the intact skin. As to the recognition of individual tissues in the abdominal cavity, the white illumination gave a better visual recognizability compared to every other test color. CONCLUSION: This study shows that the illumination color influences the visual recognition of biological specimens and the adequate color for the visual recognition of specific tissue parts is distinct among biological specimens. Using the lighting system to make fine adjustments to the illumination color may be useful in medical diagnosis and surgery.

An experimental comparative study of drilling efficiency and temperature elevation with unmodified and modified medical drills in pig tibia bone.

BACKGROUND: There are no medical drill specifications capable of achieving bone drilling in a short time under low-thrust and low-speed drilling. Gekkou-drill® is an industrial drill that enables drilling with low cutting resistance by its characteristic point design. Our aims were to develop Gekkou-modified drills by processing to the points of currently available medical drills and to verify whether these modified drills enable less invasive drilling procedure for bone tissue in thermal exposure compared with unmodified medical drills. MATERIALS AND METHODS: Two commercially available 3.2-mm drills were compared before and after Gekkou modification. Drilling of pig tibias was performed at speeds of 300, 800, and 1,500 rpm and a uniform thrust force of 10 N. Temperature at the entry point for bone drilling was measured using a digital thermometer system. The feed rates were calculated using cortical thickness and monitoring data of the digital force gauge. RESULTS: Two unmodified drills could not penetrate the cortical bone on the near side at 300 rpm, even after 5 min of drilling. The maximum temperatures with modified drills were 54.6 °C and 46.2 °C at 300 rpm. At medium to high speeds, those were statistically significantly lower than with unmodified drills (58.5 °C vs. 90.5 °C at 800 rpm, 62.6 °C vs. 80.8 °C and 73.9 °C vs. 104.6 °C at 1,500 rpm). The feed rates for modified drills were 4.9-6.9 times as high as unmodified drills at 800 rpm, and 3.4 to 4.5 times at 1,500 rpm. On the other hand, the feed rates of modified drills at 300 rpm were equal to or higher than those of unmodified drills at 1500 rpm. CONCLUSION: Gekkou-modified drills clearly suppressed the temperature rise and increased the feed rate compared with conventional drills. Furthermore, it was notable that these modified drills had higher performance even at conditions of low thrust and low speed.

Thermal damage of osteocytes during pig bone drilling: an in vivo comparative study of currently available and modified drills.

OBJECTIVES: The Gekkou-drill® is an industrial drill that is highly efficient due to reduced cutting resistance resulting from its characteristic drill point shape. In this experiment, we compared the degree of thermal damage to bone tissue caused by conventional medical drills and these same drills with Gekkou modifications. METHODS: Holes were created in the tibias of living pigs using two different 3.2-mm diameter drills and their modified versions. Regarding the drilling parameters, the thrust force was 10 N and the drilling speeds were 800 revolutions per minute (rpm) and 1500 rpm. We compared the original and modified drills in terms of the bone temperature around the drill bit and the total time necessary to create each hole, the latter calculated using imaging data captured during drilling. In histopathological examination, the percentages of empty lacunae in osteocytes of the cortical bone beneath the periosteum were evaluated at 400 × magnification with an optical microscope. RESULTS: Compared to the original drills, the modified drills required significantly less time to create each hole and caused a significantly lower temperature rise during bone drilling. With the modified drills, the percentages of empty lacunae around the drilling holes were about 1/2-1/3 of those with the original drills, and were significantly lower for both drilling speeds. CONCLUSIONS: Gekkou-modified medical drills shortened drilling times despite low thrust force, and histopathological assessment demonstrated a significant reduction in osteocyte damage.

Pain Evaluation During Colonoscopy by the Erythema Index of the Facial Image.

BACKGROUND: Endoscopy of the digestive tract is useful but is associated with significant pain to the patient. Its safety and tolerability could be improved by an immediate and objective method to evaluate the pain level and give feedback to the examiner. However, under the current circumstances, it is difficult to measure and assess the pain level objectively. METHODS: We previously developed a discomfort assessment device that measures the changes in brain activity caused by changes in the pain level by extracting the changes in the erythema index from facial color data. In this study, to evaluate the usefulness of this discomfort assessment device, the association between the changes in the erythema index of facial images during colonoscopy and the subjective pain level during the examination were evaluated. For the recording of the subjective pain level during the examination, a subjective pain level recording device that we developed to measure grip strength over time was used. The subjective pain level, facial image, and percutaneous venous oxygen saturation during the examination were recorded in 30 patients who underwent colonoscopy at our hospital. RESULTS: The duration of colonoscopy was divided into the insertion section and the removal section. The subjective pain level was found to be significantly greater during the insertion section than during the removal section, and the changes in the erythema index of the facial images were significantly different between the two groups. CONCLUSION: These findings indicate that the erythema index changes on facial images determined by the discomfort assessment device may facilitate objective evaluation of the pain level during colonoscopy.

Comparison of Healthcare Workers Transferring Patients Using Either Conventional Or Robotic Wheelchairs: Kinematic, Electromyographic, and Electrocardiographic Analyses.

Objectives. The aim of this study was to compare the musculoskeletal and physical strain on healthcare workers, by measuring range of motion (ROM), muscle activity, and heart rate (HR), during transfer of a simulated patient using either a robotic wheelchair (RWC) or a conventional wheelchair (CWC). Methods. The subjects were 10 females who had work experience in transferring patients and another female adult as the simulated patient to be transferred from bed to a RWC or a CWC. In both experimental conditions, ROM, muscle activity, and HR were assessed in the subjects using motion sensors, electromyography, and electrocardiograms. Results. Peak ROM of shoulder flexion during assistive transfer with the RWC was significantly lower than that with the CWC. Values for back muscle activity during transfer were lower with the RWC than with the CWC. Conclusions. The findings suggest that the RWC may decrease workplace injuries and lower back pain in healthcare workers.

Automated stride assistance device improved the gait parameters and energy cost during walking of healthy middle-aged females but not those of young controls.

[Purpose] The aim of this study was to clarify the effects of an automated stride assistance device on gait parameters and energy cost during walking performed by healthy middle-aged and young females. [Subjects and Methods] Ten middle-aged females and 10 young females were recruited as case and control participants, respectively. The participants walked for 3 minutes continuously under two different experimental conditions: with the device and without the device. Walking distance, mean walking speed, mean step length, cadence, walk ratio and the physiological cost index during the 3-minutes walk were measured. [Results] When walking with the stride assistance device, the step length and walk ratio of the middle-aged group were significantly higher than without it. Also, during walking without assistance from the device, the physiological cost index of the middle-aged group significantly increased; whereas during walking with assistance, there was no change. The intergroup comparison in the middle-aged group showed the physiological cost index was lower under the experimental condition with assistance provided, as opposed to the condition without the provision of assistance. [Conclusion] The results of this study show that the stride assistance device improved the gait parameters of the middle-aged group but not those of young controls.