RESUMO
Flexible imagers are currently under intensive development as versatile optical sensor arrays, designed to capture images of surfaces and internals, irrespective of their shape. A significant challenge in developing flexible imagers is extending their detection capabilities to encompass a broad spectrum of infrared light, particularly terahertz (THz) light at room temperature. This advancement is crucial for thermal and biochemical applications. In this study, a flexible infrared imager is designed using uncooled carbon nanotube (CNT) sensors and organic circuits. The CNT sensors, fabricated on ultrathin 2.4 µm substrates, demonstrate enhanced sensitivity across a wide infrared range, spanning from near-infrared to THz wavelengths. Moreover, they retain their characteristics under bending and crumpling. The design incorporates light-shielded organic transistors and circuits, functioning reliably under light irradiation, and amplifies THz detection signals by a factor of 10. The integration of both CNT sensors and shielded organic transistors into an 8 × 8 active-sensor matrix within the imager enables sequential infrared imaging and nondestructive assessment for heat sources and in-liquid chemicals through wireless communication systems. The proposed imager, offering unique functionality, shows promise for applications in biochemical analysis and soft robotics.
RESUMO
PURPOSE: To evaluate the reproducibility and reliability of a novel electromyogram (EMG) device with a flexible sheet sensor for measuring muscle activity related to mastication and swallowing. METHODS: We developed a new EMG device made of elastic sheet electrodes to measure the masseter and digastric muscle activities for evaluating mastication and swallowing. To examine the measurement reproducibility of the new EMG device, masseter muscle activity was analyzed using the intraclass correlation coefficient (ICC). Further, we measured the maximum amplitude, duration, integrated value, and signal-to-noise ratio (SNR) using the new EMG device and conventional EMG devices and evaluated the reliability using ICC and Bland-Altman analysis. RESULTS: We confirmed high ICC (1,1) and ICC (2,1) scores (0.92 and 0.88, respectively) while measuring the reproducibility of the new EMG device. When compared to the active electrode EMG device, we found a high correlation for the maximum amplitude (0.90), duration (0.99), integrated values (0.90), and SNR (0.75), with no observation of significant fixed errors. Moreover, the regression coefficient was not significant for any of the evaluation items and no proportional error was observed. Compared with the passive electrode EMG device, the maximum amplitude and duration were highly correlated (0.73 and 0.89). In addition, the SNR exhibited a significant fixed error. In contrast, the regression coefficient was not significant for any of the evaluation items and no proportional error was observed. CONCLUSIONS: Our results suggest that the new EMG device can be used to reliably and reproducibly evaluate muscle activity during mastication and swallowing.
Assuntos
Músculo Masseter , Mastigação , Músculo Masseter/fisiologia , Eletromiografia/métodos , Reprodutibilidade dos Testes , Mastigação/fisiologia , EletrodosRESUMO
The integration of flexible electronics with optics can help realize a powerful tool that facilitates the creation of a smart society wherein internal evaluations can be easily performed nondestructively from the surface of various objects that is used or encountered in daily lives. Here, organic-material-based stretchable optical sensors and imagers that possess both bending capability and rubber-like elasticity are reviewed. The latest trends in nondestructive evaluation equipment that enable simple on-site evaluations of health conditions and abnormalities are discussed without subjecting the targeted living bodies and various objects to mechanical stress. Real-time performance under real-life conditions is becoming increasingly important for creating smart societies interwoven with optical technologies. In particular, the terahertz (THz)-wave region offers a substance- and state-specific fingerprint spectrum that enables instantaneous analyses. However, to make THz sensors accessible, the following issues must be addressed: broadband and high-sensitivity at room temperature, stretchability to follow the surface movements of targets, and digital transformation compatibility. The materials, electronics packaging, and remote imaging systems used to overcome these issues are discussed in detail. Ultimately, stretchable optical sensors and imagers with highly sensitive and broadband THz sensors can facilitate the multifaceted on-site evaluation of solids, liquids, and gases.
RESUMO
Optical transparency is highly desirable in bioelectronic sensors because it enables multimodal optical assessment during electronic sensing. Ultrathin (<5 µm) organic electrochemical transistors (OECTs) can be potentially used as a highly efficient bioelectronic transducer because they demonstrate high transconductance during low-voltage operation and close conformability to biological tissues. However, the fabrication of fully transparent ultrathin OECTs remains a challenge owing to the harsh etching processes of nanomaterials. In this study, fully transparent, ultrathin, and flexible OECTs are developed using additive integration processes of selective-wetting deposition and thermally bonded lamination. These processes are compatible with Ag nanowire electrodes and conducting polymer channels and realize unprecedented flexible OECTs with high visible transmittance (>90%) and high transconductance (≈1 mS) in low-voltage operations (<0.6 V). Further, electroencephalogram acquisition and nitrate ion sensing are demonstrated in addition to the compatibility of simultaneous assessments of optical blood flowmetry when the transparent OECTs are worn, owing to the transparency. These feasibility demonstrations show promise in contributing to human stress monitoring in bioelectronics.
Assuntos
Técnicas Biossensoriais , Nanoestruturas , Humanos , Polímeros , EletrodosRESUMO
Flexible electronics has paved the way toward the development of next-generation wearable and implantable healthcare devices, including multimodal sensors. Integrating flexible circuits with transducers on a single substrate is desirable for processing vital signals. However, the trade-off between low power consumption and high operating speed is a major bottleneck. Organic thin-film transistors (OTFTs) are suitable for developing flexible circuits owing to their intrinsic flexibility and compatibility with the printing process. We used a photoreactive insulating polymer poly((±)endo,exo-bicyclo[2.2.1]hept-ene-2,3-dicarboxylic acid, diphenylester) (PNDPE) to modulate the power consumption and operating speed of ultraflexible organic circuits fabricated on a single substrate. The turn-on voltage (V on) of the p- and n-type OTFTs was controlled through a nanoscale interfacial photochemical reaction. The time-of-flight secondary ion mass spectrometry revealed the preferential occurrence of the PNDPE photochemical reaction in the vicinity of the semiconductor-dielectric interface. The power consumption and operating speed of the ultraflexible complementary inverters were tuned by a factor of 6 and 4, respectively. The minimum static power consumption was 30 ± 9 pW at transient and 4 ± 1 pW at standby. Furthermore, within the tuning range of the operating speed and at a supply voltage above 2.5 V, the minimum stage delay time was of the order of hundreds of microseconds. We demonstrated electromyogram measurements to emphasize the advantage of the nanoscale interfacial photochemical reaction. Our study suggests that a nanoscale interfacial photochemical reaction can be employed to develop imperceptible and wearable multimodal sensors with organic signal processing circuits that exhibit low power consumption.
RESUMO
Flexible electronics have gained considerable attention for application in wearable devices. Organic transistors are potential candidates to develop flexible integrated circuits (ICs). A primary technique for maximizing their reliability, gain, and operation speed is the modulation of charge-carrier behavior in the respective transistors fabricated on the same substrate. In this work, heterogeneous functional dielectric patterns (HFDP) of ultrathin polymer gate dielectrics of poly((±)endo,exo-bicyclo[2.2.1]hept-ene-2,3-dicarboxylic acid, diphenylester) (PNDPE) are introduced. The HFDP that are obtained via the photo-Fries rearrangement by ultraviolet radiation in the homogeneous PNDPE provide a functional area for charge-carrier modulation. This leads to programmable threshold voltage control over a wide range (-1.5 to +0.2 V) in the transistors with a high patterning resolution, at 2 V operational voltage. The transistors also exhibit high operational stability over 140 days and under the bias-stress duration of 1800 s. With the HFDP, the performance metrics of ICs, for example, the noise margin and gain of the zero-VGS load inverters and the oscillation frequency of ring oscillators are improved to 80%, 1200, and 2.5 kHz, respectively, which are the highest among the previously reported zero-VGS -based organic circuits. The HFDP can be applied to much complex and ultraflexible ICs.
RESUMO
Energy autonomy and conformability are essential elements in the next generation of wearable and flexible electronics for healthcare, robotics and cyber-physical systems. This study presents ferroelectric polymer transducers and organic diodes for imperceptible sensing and energy harvesting systems, which are integrated on ultrathin (1-µm) substrates, thus imparting them with excellent flexibility. Simulations show that the sensitivity of ultraflexible ferroelectric polymer transducers is strongly enhanced by using an ultrathin substrate, which allows the mounting on 3D-shaped objects and the stacking in multiple layers. Indeed, ultraflexible ferroelectric polymer transducers have improved sensitivity to strain and pressure, fast response and excellent mechanical stability, thus forming imperceptible wireless e-health patches for precise pulse and blood pressure monitoring. For harvesting biomechanical energy, the transducers are combined with rectifiers based on ultraflexible organic diodes thus comprising an imperceptible, 2.5-µm thin, energy harvesting device with an excellent peak power density of 3 mW·cm-3.
Assuntos
Fontes de Energia Bioelétrica , Técnicas Biossensoriais/instrumentação , Eletrônica Médica/instrumentação , Transdutores , Dispositivos Eletrônicos Vestíveis , Técnicas Biossensoriais/métodos , Eletrônica Médica/métodos , Humanos , Sistemas Microeletromecânicos/instrumentação , Sistemas Microeletromecânicos/métodos , Monitorização Fisiológica/instrumentação , Monitorização Fisiológica/métodos , Reprodutibilidade dos Testes , Robótica/instrumentação , Robótica/métodosRESUMO
We report the rapid improvement in the carrier mobility of the electric double layer field-effect transistor based on the ionic liquid (IL)/pentacene single crystal interface. Generally, the surface oxidation of the pentacene single crystal is unavoidable, and the considerable degradation restricts the performance of the field-effect transistor. However, the formation of the IL/pentacene single crystal interface resolves this problem by increasing the carrier mobility by approximately twice the initial value within a few hours. Furthermore, frequency-modulation atomic force microscopy revealed that the aforementioned rapid improvement is attributed to the appearance of a clean and flat surface of the pentacene single crystal via the defect-induced spontaneous dissolution of pentacene molecules into the IL.
RESUMO
Mechanically and visually imperceptible sensor sheets integrated with lightweight wireless loggers are employed in ultimate flexible hybrid electronics (FHE) to reduce vital stress/nervousness and monitor natural biosignal responses. The key technologies and applications for conceptual sensor system fabrication are reported, as exemplified by the use of a stretchable sensor sheet completely conforming to an individual's body surface to realize a low-noise wireless monitoring system (<1 µV) that can be attached to the human forehead for recording electroencephalograms. The above system can discriminate between Alzheimer's disease and the healthy state, thus offering a rapid in-home brain diagnosis possibility. Moreover, the introduction of metal nanowires to improve the transparency of the biocompatible sensor sheet allows one to wirelessly acquire electrocorticograms of nonhuman primates and simultaneously offers optogenetic stimulation such as toward-the-brain-machine interface under free movement. Also discussed are effective methods of improving electrical reliability, biocompatibility, miniaturization, etc., for metal nanowire based tracks and exploring the use of an organic amplifier as an important component to realize a flexible active probe with a high signal-to-noise ratio. Overall, ultimate FHE technologies are demonstrated to achieve efficient closed-loop systems for healthcare management, medical diagnostics, and preclinical studies in neuroscience and neuroengineering.
Assuntos
Metais/química , Monitorização Fisiológica/métodos , Nanofios/química , Tecnologia sem Fio , Animais , Encefalopatias/diagnóstico , Interfaces Cérebro-Computador , Eletroencefalografia , Humanos , Monitorização Fisiológica/instrumentação , Dispositivos Eletrônicos VestíveisRESUMO
In this study, ultralow 1/f noise organic thin-film transistors (OTFTs) based on parylene gate dielectrics modified with triptycene (Trip) modifiers were fabricated. The fabricated OTFTs showed the lowest 1/f noise level among those of previously reported OTFTs. It is well known that 1/f noise causes degradation of signal integrity in analog and digital circuits. However, conventional OTFTs still possess high 1/f noise levels, and the factors that strongly affect 1/f noise are still ambiguous. In this work, the effect of gate dielectric surface on 1/f noise was investigated. First, by comparing OTFTs composed of various channel lengths, we revealed that contact resistance did not affect 1/f noise. Second, we compared parylene OTFTs with and without a self-assembled Trip modifier layer in terms of 1/f noise and trap density of states (Trap DOS). The experiments revealed that a specific Trip modifier layer suppresses the shallow Trap DOS in the OTFTs, leading to a low 1/f noise. Moreover, the 1/f noise level and Trap DOS of various kinds of OTFTs were comprehensively compared, which highlighted that the 1/f noise of OTFTs strongly depends on the gate dielectric surface. Finally, detailed analysis of the gate dielectric interface led us to conclude that the disorder of gate dielectrics and the crystalline quality of semiconductor films are related to shallow Trap DOS, which correlates with 1/f noise.
RESUMO
Pentacene, an organic molecule, is a promising material for high-performance field effect transistors due to its high charge carrier mobility in comparison to usual semiconductors. However, the charge carrier mobility is strongly dependent on the molecular orientation of pentacene in the active layer of the device, which is hard to investigate using standard techniques in a real device. Raman scattering, on the other hand, is a high-resolution technique that is sensitive to the molecular orientation. In this work, we investigated the orientation distribution of pentacene molecules in actual transistor devices by polarization-dependent Raman spectroscopy and correlated these results with the performance of the device. This study can be utilized to understand the distribution of molecular orientation of pentacene in various electronic devices and thus would help in further improving their performances.
RESUMO
One-dimensional metal nanowires offer great potential in printing transparent electrodes for next-generation optoelectronic devices such as flexible displays and flexible solar cells. Printing fine patterns of metal nanowires with widths <100 µm is critical for their practical use in the devices. However, the fine printing of metal nanowires onto polymer substrates remains a major challenge owing to their unintended alignment. This paper reports on a fine-printing method for transparent silver nanowires (AgNWs) electrodes miniaturized to a width of 50 µm on ultrathin (1 µm) polymer substrate, giving a high yield of >90%. In this method, the AgNW dispersion, which is swept by a glass rod, is spontaneously deposited to the hydrophilic areas patterned on a hydrophobic-coated substrate. The alignment and accumulation of AgNWs at the pattern periphery are enhanced by employing a high sweeping rate of >3.2 mm s-1, improving electrical conductivity and pattern definition. The more aligned and more accumulated AgNWs lower the sheet resistance by a factor of up to 6.8. In addition, a high pattern accuracy ≤ 3.6 µm, which is the deviation from the pattern designs, is achieved. Quantitative analyses are implemented on the nanowire alignment to understand the nanowire geometry. This fine-printing method of the AgNW electrodes will provide great opportunities for realizing flexible and high-performance optoelectronic devices.
RESUMO
We present a highly ordered surface modification layer for polymers based on ambient solution-processed triptycene (Trip) derivatives for high-mobility organic thin-film transistors (OTFTs). The nested packing of Trip molecules results in the formation of 2D hexagonal arrays, which stack one-dimensionally on the surface of polymer dielectrics without anchoring groups. The Trip surface was previously shown to be preferable for the growth of organic semiconductors (OSCs), and hence for enhancing the mobility of OTFTs. However, although the Trip modifier layer has been realized by thermal evaporation in a high-vacuum environment (TVE), it still has grain-boundary disorders that hinder the optimal growth of OSCs. To fabricate OTFTs with higher mobility, a disorder-free Trip layer is needed. We developed highly ordered Trip layers on polymer dielectrics via blade coating. In addition, we clarified that the highly ordered Trip modifier layer enhances the mobility of the OTFTs by more than 40%, relative to the disordered Trip layer prepared by TVE. Finally, we realized a ring oscillator composed of OTFTs with a highly ordered Trip layer.
RESUMO
Neural interfaces enabling light transmittance rely on optogenetics to control and monitor specific neural activity, thereby facilitating deeper understanding of intractable diseases. This study reports the material strategy underlying an optogenetic neural interface comprising stretchable and transparent conductive tracks and capable of demonstrating high biocompatibility after long-term (5-month) implantation. Ag/Au core-shell nanowires contribute toward improving track performance in terms of stretchability (<60% strain), transparency (<83%), and electrical resistance (15 Ω sq-1 ). The neural interface integrated with gel-coated exterior microelectrodes preserves low impedance (1.1-3.2 Ω cm2 ) in a saline solution over the evaluated 5-month period. Besides the use of efficient conductive materials, surface treatment using antithrombogenic polymer tends to prevent the growth of granulation tissue, thereby facilitating clear monitoring of electrocorticograms (ECoG) in a rodent during chronic implantation. The flexible and transparent neural interface pathologically exhibits noncytotoxicity and low inflammatory response while efficiently recording evoked ECoG in a nonhuman primate via optogenetic stimulation. The proposed highly reliable interface can be employed in multifaceted approaches for translational research based on chronic implants.
Assuntos
Córtex Cerebral/fisiologia , Ouro/química , Nanofios/química , Optogenética/métodos , Prata/química , Animais , Impedância Elétrica , Eletrocorticografia , Eletrodos Implantados , Potenciais Somatossensoriais Evocados/fisiologia , Álcool de Polivinil/química , RatosRESUMO
The application of dinaphthothienothiophene (DNTT) molecules, a novel organic semiconductor material, has recently increased due to its high charge carrier mobility and thermal stability. Since the structural properties of DNTT molecules, such as the molecular density distribution and molecular orientations, significantly affect their charge carrier mobility in organic field-effect transistors devices, investigating these properties would be important. Here, we report Raman spectroscopic studies on DNTT in a transistor device, which was further analyzed by the density functional theory. We also show a perspective of this technique for orientation analysis of DNTT molecules within a transistor device.
RESUMO
Field-effect transistors using correlated electron materials with an electronic phase transition pave a new avenue to realize steep slope switching, to overcome device size limitations and to investigate fundamental science. Here, we present a new finding in gate-bias-induced electronic transport switching in a correlated electron material, i.e., a VO2 nanowire channel through a hybrid gate, which showed an enhancement in the resistive modulation efficiency accompanied by expansion of metallic nano-domains in an insulating matrix by applying gate biases near the metal-insulator transition temperature. Our results offer an understanding of the innate ability of coexistence state of metallic and insulating domains in correlated materials through carrier tuning and serve as a valuable reference for further research into the development of correlated materials and their devices.
RESUMO
As described in this paper, we propose a sheet-type pressure sensor to support assistive technology for artificial knee joint replacement. The proposed pressure sensor consists of two sheets: an electrode sheet with metal wiring and a flexible polymer-based insulating layer on 80 µm polyimide film, as well as a pressure-sensitive conductive sheet that can function as a pressure-to-resistance sensor. We developed a 5 cm × 7 cm pressure sensor sheet with 116 sensing points. The multiple sensing sheet is expected to monitor the pressure distribution in an artificial knee joint during total knee arthroplasty to improve patients' quality of life.
Assuntos
Joelho , Artroplastia do Joelho , Humanos , Articulação do Joelho , Prótese do Joelho , Qualidade de VidaRESUMO
This paper presents a flexible organic thin-film transistor (OTFT) amplifier for bio-signal monitoring and presents the chip component assembly process. Using a conductive adhesive and a chip mounter, the chip components are mounted on a flexible film substrate, which has OTFT circuits. This study first investigates the assembly technique reliability for chip components on the flexible substrate. This study also specifically examines heart pulse wave monitoring conducted using the proposed flexible amplifier circuit and a flexible piezoelectric film. We connected the amplifier to a bluetooth device for a wearable device demonstration.
Assuntos
Amplificadores Eletrônicos , Adesivos , Desenho de Equipamento , Monitorização Fisiológica , Compostos Orgânicos , Análise de Onda de Pulso , Dispositivo de Identificação por Radiofrequência , Reprodutibilidade dos Testes , Processamento de Sinais Assistido por ComputadorRESUMO
Organic neutral π-monoradicals are promising semiconductors with balanced ambipolar carrier-transport abilities, which arise from virtually identical spatial distribution of their singly occupied and unoccupied molecular orbitals, SOMO(α) and SOMO(ß), respectively. Herein, we disclose a boron-stabilized triphenylmethyl radical that shows outstanding thermal stability and resistance toward atmospheric conditions due to the substantial spin delocalization. The radical is used to fabricate organic Mott-insulator transistors that operate at room temperature, wherein the radical exhibits well-balanced ambipolar carrier transport properties.
RESUMO
To grow small molecule semiconductor thin films with domain size larger than modern-day device sizes, we evaporate the material through a dense array of small apertures, called a stencil nanosieve. The aperture size of 0.5 µm results in low nucleation density, whereas the aperture-to-aperture distance of 0.5 µm provides sufficient crosstalk between neighboring apertures through the diffusion of adsorbed molecules. By integrating the nanosieve in the channel area of a thin-film transistor mask, we show a route for patterning both the organic semiconductor and the metal contacts of thin-film transistors using one mask only and without mask realignment.