Tribocorrosion of 3D printed dental implants: An overview.

With the advancements in dental science and the growing need for improved dental health, it has become imperative to develop new implant materials which possess better geometrical, mechanical, and physical properties. The oral environment is a corrosive environment and the relative motion between the teeth also makes the environment more hostile. Therefore, the combined corrosion and tribology commonly known as tribocorrosion of implants needs to be studied. The complex shapes of the dental implants and the high-performance requirements of these implants make manufacturing difficult by conventional manufacturing processes. With the advent of additive manufacturing or 3D-printing, the development of implants has become easy. However, the various requirements such as surface roughness, mechanical strength, and corrosion resistance further make the manufacturing of implants difficult. The current paper reviews the various studies related to3D-printed implants. Also, the paper tries to highlight the role of 3D-Printing can play in the area of dental implants. Further studies both experimental and numerical are needed to devise optimized conditions for 3D-printing implants to develop implants with improved mechanical, corrosion, and biological properties.

Tribo-corrosive behavior of additive manufactured parts for orthopaedic applications.

Background: Additive manufacturing (AM) being an integral component of the production offers a wide variety of applications in the production of different components. The medical industry after the introduction of Additive Manufacturing has resulted in several advancements. The production of intricate patient-specific implants is one of such advancements which greatly assist a surgeon during a surgery. Orthopedic implants apart from possessing good mechanical strength are also expected to exhibit good tribological and corrosion behavior. As a result, the development of various orthopaedic implants and tools has become simple with the use of additive manufacturing. Objectives and Rationale: In the current paper an effort has been made to discuss actual scientific knowledge on the tribo-corrosive behavior of additive manufactured parts for orthopedic applications. Different studies dealing with the mechanisms of lubrication and friction in synovial joints have also been considered. A special focus has also been laid down to study the corrosive effect of implants on the human body. A section dedicated to texturing of orthopedic implants has also been provided. The paper further elaborates the different research challenges and issues related to the use of additive manufacturing for the production of optimized orthopedic implants. Conclusion: The study revealed that additive manufacturing has greatly aided in the manufacture of different orthopaedic implants with enhanced properties. However, a detailed study of the effect of processes like friction, wear, lubrication and corrosion in these implants needs to be done. The performance of these implants in the presence of various synovial fluids also needs to be addressed. However, the lack of more biocompatible materials, scalability and cost issues hinder the widespread use of AM in the different orthopaedic applications.