Characterization of Polylactic Acid Biocomposites Filled with Native Starch Granules from Dioscorea remotiflora Tubers.

Biocomposites were fabricated utilizing polylactic acid (PLA) combined with native starch sourced from mountain's yam (Dioscorea remotiflora Knuth), an underexplored tuber variety. Different starch compositions (7.5, 15.0, 22.5, and 30.0 wt.%) were blended with PLA in a batch mixer at 160 °C to produce PLA/starch biocomposites. The biocomposites were characterized by analyzing their morphology, particle size distribution, thermal, X-ray diffraction (XDR), mechanical, and dynamic mechanical (DMA) properties, water absorption behavior, and color. The results showed that the amylose content of Dioscorea remotiflora starch was 48.43 ± 1.4%, which corresponds to a high-amylose starch (>30% of amylose). Particle size analysis showed large z-average particle diameters (Dz0) of the starch granules (30.59 ± 3.44 µm). Scanning electron microscopy (SEM) images showed oval-shaped granules evenly distributed throughout the structure of the biocomposite, without observable agglomeration or damage to its structure. XDR and DMA analyses revealed an increase in the crystallinity of the biocomposites as the proportion of the starch increased. The tensile modulus (E) underwent a reduction, whereas the flexural modulus (Eflex) increased with the amount of starch incorporated. The biocomposites with the highest Eflex were those with a starch content of 22.5 wt.%, which increased by 8.7% compared to the neat PLA. The water absorption of the biocomposites demonstrated a higher uptake capacity as the starch content increased. The rate of water absorption in the biocomposites followed the principles of Fick's Law. The novelty of this work lies in its offering an alternative for the use of high-amylose mountain's yam starch to produce low-cost bioplastics for different applications.

Effect of surface modification of graphene oxide with a reactive silane coupling agent on the mechanical properties and biocompatibility of acrylic bone cements.

Carbon allotrope materials (i.e. carbon nanotubes (CNTs), graphene, graphene oxide (GO)), have been used to reinforce acrylic bone cement. Nevertheless, the intrinsic incompatibility among the above materials produces a deficient interphase. Thus, in this work, the effect of the content of functionalized graphene oxide with a reactive silane on the mechanical properties and cell adhesion of acrylic bone cement was studied. GO was obtained by an oxidative process on natural graphite; subsequently, GO was functionalized with 3-methacryloxypropyltrimethoxysilane (MPS) to enhance the interphase between the graphenic material and acrylic polymeric matrix. Pristine GO and functionalized graphene oxide (GO-MPS) were characterized physicochemically (XPS, XRD, FTIR, and Raman) and morphologically (SEM and TEM). Silanized GO was added into the acrylic bone cement at different concentrations; the resulting materials were characterized mechanically, and their biocompatibility was also evaluated. The physicochemical characterization results showed that graphite was successfully oxidized, and the obtained GO was successfully functionalized with the silane coupling agent (MPS). SEM and TEM images showed that the GO is composed of few stacked layers. Compression testing results indicated a tendency of increasing stiffness and toughness of the acrylic bone cements at low concentration of functionalized GO. Additionally, the bending testing results showed a slightly increase in bone cement strain with the incorporation of GO-MPS. Finally, all samples exhibited cell viability higher than 70%, which means that materials are considered non-cytotoxic, according to the ISO 10993-5 standard.

Influence of Molecular Weight and Grafting Density of PEG on the Surface Properties of Polyurethanes and Their Effect on the Viability and Morphology of Fibroblasts and Osteoblasts.

Grafting polyethylene glycol (PEG) onto a polymer's surface is widely used to improve biocompatibility by reducing protein and cell adhesion. Although PEG is considered to be bioinert, its incorporation onto biomaterials has shown to improve cell viability depending on the amount and molecular weight (MW) used. This phenomenon was studied here by grafting PEG of three MW onto polyurethane (PU) substrata at three molar concentrations to assess their effect on PU surface properties and on the viability of osteoblasts and fibroblasts. PEG formed a covering on the substrata which increased the hydrophilicity and surface energy of PUs. Among the results, it was observed that osteoblast viability increased for all MW and grafting densities of PEG employed compared with unmodified PU. However, fibroblast viability only increased at certain combinations of MW and grafting densities of PEG, suggesting an optimal level of these parameters. PEG grafting also promoted a more spread cell morphology than that exhibited by unmodified PU; nevertheless, cells became apoptotic-like as PEG MW and grafting density were increased. These effects on cells could be due to PEG affecting culture medium pH, which became more alkaline at higher MW and concentrations of PEG. Results support the hypothesis that surface energy of PU substrates can be tuned by controlling the MW and grafting density of PEG, but these parameters should be optimized to promote cell viability without inducing apoptotic-like behavior.

Physicochemical, Mechanical, and Structural Properties of Bio-Active Films Based on Biological-Chemical Chitosan, a Novel Ramon (Brosimum alicastrum) Starch, and Quercetin.

The properties of biological-chemical chitosan (BCh) films from marine-industrial waste and a non-conventional Ramon starch (RS) (Brosimum alicastrum) were investigated. Blended films of BCh/RS were prepared to a volume ratio of 4:1 and 1:4, named (BChRS-80+q, biological-chemical chitosan 80% v/v and Ramon starch, BChRS-20+q, biological-chemical chitosan 20% v/v and Ramon starch, both with quercetin), Films from commercial chitosan (CCh) and corn starch (CS), alone or blended (CChCS-80+q, commercial chitosan 80% v/v and corn starch, CChCS-20+q commercial chitosan 20% v/v and corn starch, both with quercetin) were also prepared for comparison purposes. Films were investigated for their physicochemical characteristics such as thickness, moisture, swelling, water-vapor permeability, and water solubility. In addition, their mechanical and structural properties were studied using Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric analysis (TGA) and Scanning Electron Microscopy (SEM) techniques. Antioxidant activity was evaluated as radical scavenging, and antimicrobial effect was also determined. The BCh and RS films presented similar tensile strength values compared with commercial biopolymers. Only films with chitosan presented antioxidant and antimicrobial activity. The FTIR spectra confirmed the interactions between functional groups of the biopolymers. Although, BChRS-80+q and BChRS-20+q films exhibited poor mechanical performance compared to their commercial counterparts, they showed good thermal stability, and improved antioxidant and antimicrobial activity in the presence of quercetin. BChRS-80+q and BChRS-20+q films have promising applications due to their biological activity and mechanical properties, based on a novel material that has been underutilized (Ramon starch) that does not compete with materials for human feeding and may be used as a coating for food products.

Antiviral capacity of polypropylene/(1-Hexadecyl) trimethyl-ammonium bromide composites against COVID-19.

During the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic, scientists from different areas are looking for alternatives to fight it. SARS-CoV-2, the cause of the infectious respiratory disease COVID-19, is mainly transmitted through direct or indirect contact with infected respiratory droplets. The integrity of the virus structure is crucial for its viability to attack human cells. Quaternary ammonium salts are characterized by having antiviral capabilities which alter or destroy the structure of the viral capsid. In this work, polypropylene (PP)/(1-Hexadecyl) trimethyl-ammonium bromide (CTAB) composites have been prepared in order to create an antiviral material. The composites were melt processed and blown to produce thin films. The CTAB content on the antiviral effect was evaluated using antibodies and serum from infected patients with the SARS-CoV-2 virus. In addition, the mechanical and thermal properties of blown films were investigated, and CTAB release kinetics from the films was followed by UV-Vis. The results indicate that the virus tends to remain less on the polymer surface by increasing the amount of CTAB in the PP matrix.

Silanized graphene oxide as a reinforcing agent for acrylic bone cements: physicochemical, mechanical and biological characterization.

Recently, different carbon-based nanomaterials have been used as reinforcing agents in acrylic bone cement formulations. Among them, graphene oxide (GO) has attracted the attention of scientific community since it could improve not only the mechanical properties but also the biocompatibility characteristics of these materials. However, using GO presents some drawbacks, such as its poor dispersion and lack of interaction with polymeric matrices, which should be prior resolved to achieve its optimal performance in acrylic bone cement. Thus, in this work, GO was treated with 3-methacryloxy propyl trimethoxy silane at various concentrations (1, 3 and 5 wt.%) to improve the interaction between the nanofiller and the poly (methyl methacrylate) matrix. Modified GO was incorporated at different percentages (0.1, 0.5 and 0.75 wt.%) into acrylic bone cement formulations and some properties were evaluated. The silanization process of the GO was confirmed by FTIR, TGA and EDX. The improvement in the mechanical performance was monitored on the compression properties whereas those related with biological properties were evaluated by osteoblast cell viability and hemocompatibility tests. Results suggest that using a 1 wt.% of the silane coupling agent, during surface treatment of GO, yields the best mechanical performance in this type of materials. It was also found that the presence of neat GO or silanized GO does not compromise the cytocompatibility and hemocompatibility of acrylic bone cement formulations.

Ceiba pentandra cellulose crosslinked with citric acid for drug release systems.

An alternative for the production of drug delivery system is proposed based on the Ceiba pentandra milkweed. The kapok cellulose was chemically crosslinked with citric acid (CA) at different CA proportions, and loaded with chlorhexidine diacetate (CHX) at different concentrations. Cellulose crosslinking was followed with FTIR and XPS analysis, and the CHX loading was determined using elemental analysis. In vitro studies showed a burst release within the first 2-3 h and the drug release kinetics was described with several models. In addition, the crosslinked Ceiba pentandra fibers did not exhibit a cytotoxic effect on human dermic fibroblasts. Results indicate that the crosslinked Ceiba pentandra fibers are a feasible material for the production of systems for drug release applications.

Characterization of starches obtained from several native potato varieties grown in Cusco (Peru).

Ten native potato varieties grown in Cusco (at 3,672 m above sea level) were used for starches extraction (at a pilot scale), and their physicochemical, functional, morphological, and structural characteristics were assessed. The content of protein, apparent amylose and phosphorus ranged from 0.1% to 0.44%, 23.42% to 35.5%, and 0.07 to 0.10%, respectively. Starch granules revealed smooth surface, with ellipsoidal and spherical shapes, particle size analysis exhibited bimodal or multimodal distribution, while the averaged crystallinity was 27.7% assessed by XRD. Gelatinization temperatures of the starches ranged from 57.4 to 60.1 °C, 60.8 to 64.3 °C, and 68.4 to 71.1°C for To, Tp, and Tc, respectively; and the gelatinization enthalpies ranged from 15.4 to 17.1 J/g. Respect to pasting properties, the peak viscosity and setback viscosity ranged from 12,970 to 16,970 mPa⋅s and from 968 to 2498 mPa⋅s, respectively. Thermogravimetric analysis (TGA) revealed no significant relationship between apparent amylose content and thermal stability. Therefore, the results reveal subtle differences in the functional characteristics of the starches from the native varieties of potato studied, which can be recommended for food industry applications. PRACTICAL APPLICATION: This study contributes to show several varieties of native potatoes from Cusco and their valorization as nonconventional starch source. Describing the physicochemical, functional, and structural characteristics of these starches could be useful for food industry applications.

Nanocrystalline cellulose (NCC) reinforced alginate based biodegradable nanocomposite film.

Nanocrystalline cellulose (NCC) reinforced alginate-based nanocomposite film was prepared by solution casting. The NCC content in the matrix was varied from 1 to 8% ((w/w) % dry matrix). It was found that the nanocomposite reinforced with 5 wt% NCC content exhibits the highest tensile strength which was increased by 37% compared to the control. Incorporation of NCC also significantly improved water vapor permeability (WVP) of the nanocomposite showing a 31% decrease due to 5 wt% NCC loading. Molecular interactions between alginate and NCC were supported by Fourier Transform Infrared Spectroscopy. The X-ray diffraction studies also confirmed the appearance of crystalline peaks due to the presence of NCC inside the films. Thermal stability of alginate-based nanocomposite films was improved after incorporation of NCC.

Production and properties of nanocellulose-reinforced methylcellulose-based biodegradable films.

Methylcellulose (MC)-based films were prepared by casting from its 1% aqueous solution containing 0.5% vegetable oil, 0.25% glycerol, and 0.025% Tween 80. Puncture strength (PS), puncture deformation (PD), viscoelasticity coefficient, and water vapor permeability (WVP) were found to be 147 N/mm, 3.46 mm, 41%, and 6.34 g.mm/m(2).day.kPa, respectively. Aqueous nanocellulose (NC) solution (0.1-1%) was incorporated into the MC-based formulation, and it was found that PS was improved (117%) and WVP was decreased (26%) significantly. Films containing 0.25% NC were found to be the optimum. Then films were exposed to gamma radiation (0.5-50 kGy), and it was revealed that mechanical properties of the films were slightly decreased after irradiation, whereas barrier properties were further improved with a decrease of WVP to 28.8% at 50 kGy. Molecular interactions due to incorporation of NC were supported by FTIR spectroscopy. Thermal properties of the NC-containing films were improved, confirmed by TGA and DSC. Crystalline peaks appeared due to NC addition, found by XRD. Micrographs of films containing NC were investigated by SEM.