RESUMO
Microflow chemistry is one of the newest and most efficient technologies used today for the safe and effective production of medicines. In this paper, we show the use of this technology in the development of a manufacturing method for napabucasin, which has potential in the treatment of colorectal and pancreatic cancers. In conventional "batch-type" reactor systems, the generation of side products can be controlled with traditional techniques such as reagent reverse-addition and temperature control. However, there is a limitation to which the yield and purity can be improved by these methods, as both are constrained by the efficiency of heat/mass transfer. Applying microflow chemistry technology alters the parameters of the constraint through the use of precise mixing in a microchannel, which offers increased possibility for improving yields and process intensification of the napabucasin process. Reported herein is a proof-of-concept study for the scale-up production of napabucasin using microflow chemistry techniques for manufacturing at the kilogram scale.
RESUMO
Continuous flow-flash synthesis of a 2-bromobenzaldehyde derivative 18 as a key intermediate of a novel cholinergic muscarinic M1 positive allosteric modulator 1 bearing an isoindolin-1-one ring system as a pharmacophore has been achieved using flow microreactors through selective I/Li exchange of 1-bromo-2-iodobenzene derivative 17 with BuLi and subsequent formylation at -40 °C of the highly reactive 2-bromophenyllithium intermediate using DMF, which is difficult to achieve by a conventional batch process due to the conversion of the highly reactive 2-bromophenyllithium intermediate into benzyne even at -78 °C. Late-stage cyclization to give the isoindolin-1-one ring system, through reductive amination of 18 followed by palladium-catalyzed carbonylation with carbon monoxide and intramolecular cyclization, efficiently afforded 1 for its further research and development.
Assuntos
Benzaldeídos/farmacologia , Colinérgicos/farmacologia , Receptor Muscarínico M1/metabolismo , Regulação Alostérica/efeitos dos fármacos , Benzaldeídos/síntese química , Benzaldeídos/química , Colinérgicos/síntese química , Colinérgicos/química , Humanos , Estrutura MolecularRESUMO
We developed a microflow method for the generation and reactions of aryllithiums bearing a cyano group, including o-lithiobenzonitrile, m-lithiobenzonitrile and p-lithiobenzonitrile. The method was effective at much higher temperatures than are required for conventional macrobatch reactions, by virtue of rapid mixing, short residence time, and efficient temperature control. In addition, reactions of o-lithiobenzonitrile with carbonyl compounds followed by trapping of the resulting lithium alkoxides with electrophiles were achieved in an integrated microflow system.
Assuntos
Cianetos/química , Hidrocarbonetos Aromáticos/química , Compostos de Lítio/química , Microfluídica/instrumentação , Cianetos/síntese química , Desenho de Equipamento , Hidrocarbonetos Aromáticos/síntese química , Compostos de Lítio/síntese química , Microfluídica/métodosRESUMO
A micro flow system consisting of micromixers and microtube reactors provides an effective method for the introduction of two electrophiles onto p-, m-, and o-dibromobenzenes. The Br-Li exchange reaction of p-dibromobenzene with nBuLi can be conducted by using the micro flow system at 20 degrees C, although much lower temperatures (< -48 degrees C) are needed for a batch reaction. The resulting p-bromophenyllithium was allowed to react with an electrophile in the micro flow system at 20 degrees C. The p-substituted bromobenzene thus obtained was subjected to a second Br-Li exchange reaction followed by reaction with a second electrophile at 20 degrees C in one flow. A similar transformation can be carried out with m-dibromobenzene by using the micro flow system. However, the Br-Li exchange reaction of o-dibromobenzene followed by reaction with an electrophile should be conducted at -78 degrees C to avoid benzyne formation. The second Br-Li exchange reaction followed by reaction with an electrophile can be carried out at 0 degrees C. By using the present method, a variety of p-, m-, and o-disubstituted benzenes were synthesized in one flow at much higher temperatures than are required for conventional batch reactions.