Evaluation of the dioxin-like toxicity in soil samples from Thua Thien Hue province using the AhR-CALUX bioassay - An update of Agent Orange contamination in Vietnam.

In this study, an AhR-responsive reporter-gene cell-based bioassay CALUX was used to assess the biological potency of dioxins and dioxin-like PCBs (dl-PCBs) in top soil samples collected from a former airbase (A-So) and remote regions from urban and agricultural areas in Thua Thien Hue, Vietnam. In top soil collected from A-So airbase, Bioanalytical EQuivalent (BEQ) concentrations of up to 2700 pg 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) per g dry weight (pg BEQ-TCDD g-1 dw) were assessed. Interestingly, while BEQ values for dl-PCBs were found to be up to 13 pg BEQ-TCDD g-1 dw, the dl-PCB activity was not detected in all the hotspot sample extracts. In contrasts, BEQ values for dioxin like compounds from remote regions were much lower and occasionally below the quantification limits of the method. The BEQ activities obtained in this study have a similar trend to the WHO-TEQ results for the samples collected in the A-So airbase. However, BEQ values were higher than those of TEQ, probably reflecting the presence of additional AhR ligands and/or possible non-additive interactions in the sample mixture. This study confirms that after more than 60 years, a strong residual pollution of PCDD/Fs remains on this former air base following the use and storage of Agent Orange during the Vietnam War, raising a health risk for populations exposed in this area because livestock animals graze there.

In situ measurement of estrogenic activity in various aquatic systems using organic diffusive gradients in thin-film coupled with ERE-CALUX bioassay.

Organic-diffusive gradients in thin-film samplers (o-DGT), were developed and applied for accumulation of estrogen and estrogen-like compounds on a XAD18 resin and deployed in situ in the effluents of Beijing Gaobeidian Wastewater Treatment Plant (GWWTP) and Brussels North Wastewater Treatment Plant as well as in several aquatic systems in Belgium, including the Zenne River, the Belgian Oostende Harbor and the North Sea. Estrogenic compounds accumulate on the XAD18 resin and the estrogenic activity of the resin extract was measured with the Estrogen Responsive Elements-Chemically Activated LUciferase gene eXpression (ERE-CALUX) bioassay. With this result and by applying Fick's diffusion law, it is possible to calculate the estrogenic activity in the aquatic system, if the diffusion boundary layer (DBL) is known or negligible compared to the hydrogel diffusive layer thickness. The DBL thickness in our study varied from 0.010 to 0.023 cm and ignoring the DBL thickness would for instance, underestimate the estrogenic activity by 10-20%. Estrogenic activities in the secondary effluent of GWWTP were the highest (29 ±â€¯4 ng E2-equivalents L-1), while the lowest level was found at the Belgian Oostende Harbor (0.05 ±â€¯0.01 ng E2-equivalents L-1). Comparable estrogenic activities in water samples measured by o-DGT and grab sampling were obtained, confirming that o-DGT can be efficiently used in various aquatic systems. The advantage of our sampling and measuring method is that very low, time averaged estrogenic activities can be determined, with a minimum of sample treatment. The risk of sample contamination is very low as well as the cost of the whole analytical procedure.

Estrogenic Activity Measurements in Water Using Diffusive Gradients in Thin-Film Coupled with an Estrogen Bioassay.

A novel type of diffusive gradients in thin-film (DGT) was combined with a chemically activated luciferase gene expression bioassay (CALUX) to measure estrogens in aquatic systems. The performance of this novel method was assessed with 17ß-estradiol (E2) as the model steroid hormone, XAD 18 resin gel as the binding phase in the DGT method and VM7Luc4E2 cells (formerly BG1Luc4E2) for the Estrogen Responsive Element (ERE)-CALUX bioassay. The measured effective diffusion coefficient of E2 in agarose diffusive gel was 4.65 ± 0.37 × 10-6 cm2 s-1 at 25 °C. The detection limit of this combined DGT/ERE-CALUX method for 1 day of sampling (0.026 ± 0.003 ng L-1 of E2) is significantly lower than that obtained by spot sampling combined with GC-MS/MS or LC-MS/MS analysis (0.1-7.0 ng L-1). The method is independent of pH (5-8), ionic strength (0.001-0.5 M), and dissolved organic matter (DOM; concentrations up to 30 mg L-1). Field applications of this novel DGT in effluents of three sewage treatment plants in Beijing city (China) showed comparable results to conventional spot (grab) sampling. This study demonstrates that the combined DGT/ERE-CALUX approach is an effective and sensitive tool for in situ monitoring of estrogenic activity in waters and wastewaters.

Evaluation of the potential health risks of substances migrating from polycarbonate replacement baby bottles.

Since the European Commission prohibited the use of bisphenol A in the production of polycarbonate (PC) baby bottles, many other materials have replaced PC for the manufacture of this type of food contact materials. In the present study, the potential migration risks associated with these alternative materials were investigated. First, all substances were evaluated for endocrine disruptive (ED) activity by using different existing lists of (suspected) ED chemicals. Next, the potential non-ED risks were assessed. A distinction was made between migrants listed in Annex I of European Regulation 10/2011 and the unlisted substances (e.g. non-intentionally added substances). For the listed substances, concentrations in the migration solutions were compared to their respective specific migration limits (SML) (when applicable). Migration of all substances was shown to be below their SML. The unlisted substances were evaluated using toxicological information from previous evaluations, or if not available, by applying the Threshold of Toxicological Concern (TTC) approach. In case the estimated exposure to the unlisted substance exceeded the human exposure TTC value, a more indepth risk assessment was performed. Based on the results of both parts of the study, four baby bottles were considered of high concern because of the potential toxicity of migrating compounds.

Screening of endocrine activity of compounds migrating from plastic baby bottles using a multi-receptor panel of in vitro bioassays.

Endocrine activity of 65 compounds migrating from polycarbonate replacement plastic baby bottles was assessed using in vitro cell based assays (reporter gene assays) involving 7 nuclear receptors, i.e. human steroid hormones receptors (oestrogen, androgen, progesterone and glucocorticoid receptors), human thyroid beta and peroxisome proliferator-activated gamma receptors, and the mouse aryl hydrocarbon receptor. The chemicals were tested at 4 concentrations ranging from 0.001mM to 1mM. Only twelve chemicals did not show any activity towards any of the nuclear receptors, while fifty three compounds showed a possible endocrine activity. Most of the agonistic activities were observed towards the oestrogen receptor while the PPARγ was the target for most of the recorded antagonistic activities. Agonistic activities were recorded for several phthalates, benzophenones, aromatic hydrocarbons and phenols, while compounds such as benzaldehydes, ketones and esters of fatty acid showed antagonistic activities. Thirty five chemicals were able of agonistic activities on 1 to 4 receptors and antagonistic activities were recorded for 35 compounds as well, towards 1 to 7 receptors. Sixteen compounds were able of both agonistic and antagonistic activities, but not on the same receptors, except in 2 cases for the oestrogen receptor and 4 cases for the PPARγ.

Assessment of estrogenic and androgenic activity in PM10 air samples from an urban, industrial and rural area in Flanders (Belgium) using the CALUX bioassay.

BACKGROUND: Endocrine disrupting chemicals represent a broad class of compounds, are widespread in the environment and can pose severe health effects. OBJECTIVES: The objective of this study was to investigate and compare the overall estrogen and androgen activating potential of PM10 air samples at an urban, rural and industrial location in Flanders, using a human in vitro cell bioassay. METHODS: PM10 samples were collected on glass fiber filters every six days between April 2013 and January 2014 using a high-volume sampler. Extraction was executed with a hexane/acetone mixture before analysis using a recombinant estrogen- or androgen responsive human carcinoma cell line. Results were expressed as bioanalytical equivalents (BEQs) per cubic meter of air. RESULTS: High fluctuations in estrogenic activity were observed during the entire sampling period, with median BEQs of 32.1, 35.9 and 31.1 fg E2-Eq m(-)³ in the industrial, urban and rural background area, respectively. Estrogenic activity was measured in 70% of the samples, while no androgenic activity was observed in any of the samples. The estrogenic activity in the industrial area was positively correlated with the airborne concentration of the sum of the non-carcinogenic PAHs pyrene and fluoranthene (rho=0.48; p<0.01) and the sum of the carcinogenic PAHs (rho=0.36; p=0.05). CONCLUSIONS: This study showed that no androgenic activity was present in PM10 and that although the median estrogenic activity was rather low and comparable in the three locations, high fluctuations in estrogenic response exist over time. While atmospheric PAHs contributed to the observed estrogenic response, especially in the industrial area, the chemicals responsible for the majority of estrogenic activity remain to be identified.

Investigation of the genotoxicity of substances migrating from polycarbonate replacement baby bottles to identify chemicals of high concern.

Due to the worldwide concern that bisphenol A might act as an endocrine disruptor, alternative materials for polycarbonate (PC) have been introduced on the European market. However, PC-replacement products might also release substances of which the toxicological profile--including their genotoxic effects--has not yet been characterized. Because a thorough characterization of the genotoxic profile of all these substances is impossible in the short term, a strategy was developed in order to prioritize those substances for which additional data are urgently needed. The strategy consisted of a decision tree using hazard information related to genotoxicity. The relevant information was obtained from the database of the European Chemicals Agency (ECHA), in silico prediction tools (ToxTree and Derek Nexus(TM)) and the in vitro Vitotox(®) test for detecting DNA damage. By applying the decision tree, substances could be classified into different groups, each characterized by a different probability to induce genotoxic effects. Although none of the investigated substances could be unequivocally identified as genotoxic, the presence of genotoxic effects could neither be excluded for any of them. Consequently, all substances require more data to investigate the genotoxic potential. However, the type and the urge for these data differs among the substances.

Assessment of estrogenic activity in PM10 air samples with the ERE-CALUX bioassay: Method optimization and implementation at an urban location in Flanders (Belgium).

Endocrine disrupting chemicals represent a broad class of compounds, are widespread in the environment and can pose severe health effects. The objective of this study was to investigate the overall estrogen activating potential of PM10 air samples at an urban location with high traffic incidence in Flanders, using a human in vitro cell bioassay. PM10 samples (n = 36) were collected on glass fiber filters every six days between April 2013 and January 2014 using a high-volume sampler. Extraction was executed with a hexane/acetone mixture before analysis using a recombinant estrogen-responsive human ovarian carcinoma (BG1Luc4E2) cell line. In addition, several samples and procedural blanks were extracted with ultra-pure ethanol or acetonitrile to compare extraction efficiencies. Results were expressed as bioanalytical equivalents (BEQs) in femtogram 17ß-estradiol equivalent (fg E2-Eq) per cubic meter of air. High fluctuations in estrogenic activity were observed during the entire sampling period, with mean and median BEQs of 50.7 and 35.9 fg E2-Eq m(-)(3), respectively. Estrogenic activity was measured in more than 70% of the samples and several sample extracts showed both high BEQs and high cytotoxicity, which could not be related to black carbon, PM10 or heavy metal concentrations. At this moment, it remains unclear which substances cause this toxicity, but comparison of results obtained with different extraction solvents indicated that acetone/hexane extracts contained more compounds that were cytotoxic and suppressive of responses than those extracted using ultra-pure ethanol. Although more research is needed, the use of a more polar extraction solvent seems to be advisable.

Time-integrated monitoring of dioxin-like polychlorinated biphenyls (dl-PCBs) in aquatic environments using the ceramic toximeter and the CALUX bioassay.

Ceramic passive samplers or toximeters (packed with active carbon 1%, w/w, on celite), in combination with the CALUX bioassay have been used as a time-integrated monitoring technique for dissolved dioxin-like PCBs in urban and industrial wastewaters. The technique showed to be reliable during laboratory experiments: (1) PCB-126 amounts extracted from the passive samplers increased linearly with the time of exposure and (2) PCB-126 concentrations calculated from the amounts accumulated by the passive samplers were in agreement with their concentrations in the testing solution. Afterwards the toximeters were applied in the field. Two sampling sites located in Egypt were chosen: the Belbeis drainage canal, and the EMAK paper mill. A total of 18 ceramic toximeters were exposed to the wastewater in both sampling sites for a maximum period of 4 weeks. Two samplers were collected weekly from each site to monitor the increase in target analytes over time. Extracts were analyzed using the CALUX bioassay and the total dioxin-like PCB toxicity was reported for the aqueous phase (water column), as well as the solid phase (sediment and sludge) in both sampling sites. The time-weighted average concentration (TWA) of dl-PCBs in wastewater of the paper mill during the sampling period ranged between 7.1 and 9.1 pg-BEQL(-1), while that of the drainage canal ranged between 9.5 and 12.2 pg-BEQL(-1). The dl-PCBs in the fibrous sludge (paper mill) and bottom sediment (drainage canal) were 0.5 and 0.4 pg-BEQg(-1) dry-weight, respectively. The organic-carbon normalized partition coefficients between sediment and water (logKoc) for the paper mill and the canal were 2.4 and 4.3, respectively.

Time-integrated monitoring of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in urban and industrial wastewaters using a ceramic toximeter and the CALUX bioassay.

The ceramic toximeter as a passive sampler in combination with the CALUX bioassay was utilized as a time-integrated pollution-assessment technique for dioxin-like PCDD/Fs in wastewaters. Toximeters filled with XCARB and enclosed in stainless steel cages were submerged in wastewater of Belbeis drainage-canal and EMAK paper-mill, located in Egypt, for 28 days. Two samplers were removed every week from each site. Extracts from toximeters, from bottom-sediments, and from paper-mill sludge were analyzed by the CALUX. Results showed a regular increase in the amounts of PCDD/Fs trapped by the toximeters as sampling time increased. Time-weighted average concentrations (TWA) of PCDD/Fs in the wastewaters of the drainage-canal and paper-mill were 231 (214-281) and 26 (24.1-32.6) pg-BEQL(-1), respectively. Compared to literature data, this means a high pollution level for the drainage-canal water, while the pollution level in the paper-mill wastewater is similar to that reported for other paper mills. The PCDD/Fs levels in the drainage-canal bottom-sediments and in the paper-mill sludge were 8.3 and 14.6 pg-BEQg(-1) dry-weight, at the lower end of internationally reported values in similar compartments. The sampling rate of the tested toximeters for dissolved PCDD/Fs was about 3.6 mL d(-1). Sediment/water partitioning coefficient logKd of PCDD/Fs in the drainage-canal and the paper-mill was 1.42 and 2.70 respectively. The organic-carbon normalized partition coefficient logKoc was 4.17 and 3.19 respectively, and is lower than the reported values for other sites.

Dioxin analysis in water by using a passive sampler and CALUX bioassay.

Passive sampling of organic pollutants is a new trend in environmental monitoring and analysis. Passive samplers are being developed to overcome the drawbacks of the conventional snapshot sampling approach. The ceramic toximeter is a promising passive sampler for monitoring dioxin-contaminated surface and ground waters. It consists of an alumina cylinder lined with a thin coating of titania and a pore diameter of 0.05 µm. The cylinder serves as a diffusion barrier limiting the analyte transport to molecular diffusion only, as well as a container for a selective trapping material of a high capacity and affinity towards the chemical(s) of concern. The cylinder is closed from both sides with PTFE caps. The ceramic toximeter was filled with activated carbon as the trapping material and has been tested in vitro for the sampling of dioxin-contaminated water. In addition, the utilization of the CALUX bioassay technique for analyzing the trapped dioxin has greatly reduced the time and costs for dioxin scanning in aqueous media. Exposure times varied between 1 and 7 days in a solution of 1.35 ng-TCDDL(-1) (TCDD is 2,3,7,8-tetrachlorodibenzodioxin). The mean effective molecular diffusion coefficient of TCDD in the toximeter amounts to 11.9×10(-6)m(2)d(-1) while the minimum concentration detectable in an aquatic system after 30 days of exposure amounts to 0.89 pg-TCDDL(-1).

The CALUX bio-assay: analytical comparison between mouse hepatoma cell lines with a low (H1L6.1c3) and high (H1L7.5c1) number of dioxin response elements.

Dioxins, furans and polychlorinated biphenyls are contaminants of high concern and as such, sensitive tools are needed to detect these persistent organic compounds in a variety of matrices. Due to the large amount of samples that need to be investigated for example for food and feed control, the CALUX bioassay (H1L6.1 clone) was developed allowing rapid and cost-efficient analysis of biological and environmental samples. Recently, a new and more sensitive clone (H1L7.5) was constructed as the third generation CALUX bioassay. This new cell line was subject of an amplification of dioxin response elements (DREs), allowing lower concentrations of target compound to be analyzed. A comparison is made between the previous, well-defined H1L6.1c3 cell line and the new H1L7.5c1 cell line: it appears that the bioassay making use of the higher number of DREs is more stable and robust, shows better repeatability and reproducibility and is; on average, 3 times more sensitive.