Dipolar skyrmions and antiskyrmions of arbitrary topological charge at room temperature.

Magnetic skyrmions are localized, stable topological magnetic textures that can move and interact with each other like ordinary particles when an external stimulus is applied. The efficient control of the motion of spin textures using spin-polarized currents opened an opportunity for skyrmionic devices such as racetrack memory and neuromorphic or reservoir computing. The coexistence of skyrmions with high topological charge in the same system promises further possibilities for efficient technological applications. In this work, we directly observe dipolar skyrmions and antiskyrmions with arbitrary topological charge in Co/Ni multilayers at room temperature. We explore the dipolar-stabilized spin objects with topological charges of up to 10 and characterize their nucleation process, their energy dependence on the topological charge and the effect of the material parameters on their stability. Furthermore, our micromagnetic simulations demonstrate spin-transfer-induced motion of these spin objects, which is important for their potential device application.

Unraveling Exchange Coupling in Ferrites Nano-Heterostructures.

The magnetic coupling of a set of SrFe12 O19 /CoFe2 O4 nanocomposites is investigated. Advanced electron microscopy evidences the structural coherence and texture at the interfaces of the nanostructures. The fraction of the lower anisotropy phase (CoFe2 O4 ) is tuned to assess the limits that define magnetically exchange-coupled interfaces by performing magnetic remanence, first-order reversal curves (FORCs), and relaxation measurements. By combining these magnetometry techniques and the structural and morphological information from X-ray diffraction, electron microscopy, and Mössbauer spectrometry, the exchange intergranular interaction is evidenced, and the critical thickness within which coupled interfaces have a uniform reversal unraveled.

Thin-Film Heterostructures Based on Co/Ni Synthetic Antiferromagnets on Polymer Tapes: Toward Sustainable Flexible Spintronics.

Synthetic antiferromagnets with perpendicular magnetic anisotropy (PMA-SAFs) have gained growing attention for both conventional and next-generation spin-based technologies. While the progress of PMA-SAF spintronic devices on rigid substrates has been remarkable, only few examples of flexible thin-film heterostructures are reported in the literature, all containing platinum group metals (PGMs). Systems based on Co/Ni may offer additional advantages with respect to devices containing PGMs, i.e., low damping and high spin polarization. Moreover, limiting the use of PGMs may relieve the demand for critical raw materials and reduce the environmental impact of related technologies, thus contributing to the transition toward a more sustainable future. Here, we discuss for the first time the realization of Co/Ni-based PMA-SAFs on polymer tapes and exploit it to obtain flexible giant magneto-resistive spin valves (GMR-SVs) with perpendicular magnetic anisotropy. Several combinations of buffer and capping layers (i.e., Pt, Pd, and Cu/Ta) are also investigated. High-quality flexible SAFs with a fully compensated antiferromagnetic region and SVs with a sizable GMR ratio (up to 4.4%), in line with the values reported in the literature for similar systems on rigid substrates, were obtained in all cases. However, we demonstrate that PGMs allows achieving the best results when used as a buffer layer, while Cu is the best choice as a capping layer to optimize the properties of the stacks. We justify the role of buffer and capping layers in terms of different interdiffusion mechanisms occurring at the interface between the metallic layers. These results, along with the high robustness of the samples' properties against bending (up to 180°), indicate that complex and bendable Co/Ni-based heterostructures with reduced content of PGMs can be obtained on flexible tapes, allowing for the development of novel flexible and sustainable spintronic devices for applications in many fields including wearable electronics, soft robotics, and biomedicine.

Disclosing the Nature of Asymmetric Interface Magnetism in Co/Pt Multilayers.

Nowadays, a wide number of applications based on magnetic materials rely on the properties arising at the interface between different layers in complex heterostructures engineered at the nanoscale. In ferromagnetic/heavy metal multilayers, such as the [Co/Pt]N and [Co/Pd]N systems, the magnetic proximity effect was demonstrated to be asymmetric, thus inducing a magnetic moment on the Pt (Pd) layer that is typically higher at the top Co/Pt(Pd) interface. In this work, advanced spectroscopic and imaging techniques were combined with theoretical approaches to clarify the origin of this asymmetry both in Co/Pt trilayers and, for the first time, in multilayer systems that are more relevant for practical applications. The different magnetic moment induced at the Co/Pt interfaces was correlated to the microstructural features that are in turn affected by the growth processes that induce a different intermixing during the film deposition, thus influencing the interface magnetic profile.

Complex correlations between microstructure and magnetic behavior in SrFe12O19 hexaferrite nanoparticles.

The magnetic properties of SrFe12O19 (SFO) hard hexaferrites are governed by the complex relation to its microstructure, determining their relevance for permanent magnets´ applications. A set of SFO nanoparticles obtained by sol-gel self-combustion synthesis was selected for an in-depth structural X-Rays powder diffraction (XRPD) characterization by means of G(L) line-profile analysis. The obtained crystallites´ size distribution reveal a clear dependence of the size along the [001] direction on the synthesis approach, resulting in the formation of platelet-like crystallites. In addition, the size of the SFO nanoparticles was determined by transmission electron microscopy (TEM) analysis and the average number of crystallites within a particle was estimated. These results have been evaluated to illustrate the formation of single-domain state below a critical value, and the activation volume was derived from time dependent magnetization measurements, aiming to clarify the reversal magnetization process of hard magnetic materials.

Magnetism of Nanoparticles: Effect of the Organic Coating.

The design of novel multifunctional materials based on nanoparticles requires tuning of their magnetic properties, which are strongly dependent on the surface structure. The organic coating represents a unique tool to significantly modify the surface structure trough the bonds between the ligands of the organic molecule and the surface metal atoms. This work presents a critical overview of the effects of the organic coating on the magnetic properties of nanoparticles trough a selection of papers focused on different approaches to control the surface structure and the morphology of nanoparticles' assemblies.

Obsidian as a Raw Material for Eco-Friendly Synthesis of Magnetic Zeolites.

A sample of rhyolitic obsidian (OS) was used as raw material for zeolite synthesis by long (4 days) and fast (2 h)-aging hydrothermal processes. Zeolite synthesis was also performed by a fast (2 h) sonication method. The products were analysed by X-ray diffraction (XRD) and scanning electron microscopy (SEM) both immediately after and 3 years after their formation in order to determine the stability of synthetic materials according to the method used. The results confirm zeolitization of obsidian both by long-aging conventional hydrothermal heating and fast hydrothermal process. However, the data highlight the efficiency of direct ultrasound energy in achieving more stable zeolite crystals over time. These results carried out using a natural source, follow those already obtained using wastes and pure sources as raw materials thus providing a definitive validation of the different mechanisms controlling zeolite formation according to the process used. Moreover, the results confirm the effectiveness of ultrasonic energy in the formation of zeolites that are more stable over time. Due to the chemical composition of the obsidian precursor, all synthetic zeolites show good magnetic properties (i.e., saturation magnetization), in view to potential magnetic separation.

Magnetocrystalline and Surface Anisotropy in CoFe2O4 Nanoparticles.

The effect of the annealing temperature Tann on the magnetic properties of cobalt ferrite nanoparticles embedded in an amorphous silica matrix (CoFe2O4/SiO2), synthesized by a sol-gel auto-combustion method, was investigated by magnetization and AC susceptibility measurements. For samples with 15% w/w nanoparticle concentration, the particle size increases from ~2.5 to ~7 nm, increasing Tann from 700 to 900 °C. The effective magnetic anisotropy constant (Keff) increases with decreasing Tann, due to the increase in the surface contribution. For a 5% w/w sample annealed at 900 °C, Keff is much larger (1.7 × 106 J/m3) than that of the 15% w/w sample (7.5 ×105 J/m3) annealed at 700 °C and showing comparable particle size. This indicates that the effect of the annealing temperature on the anisotropy is not only the control of the particle size but also on the core structure (i.e., cation distribution between the two spinel sublattices and degree of spin canting), strongly affecting the magnetocrystalline anisotropy. The results provide evidence that the magnetic anisotropy comes from a complex balance between core and surface contributions that can be controlled by thermal treatments.

Combinatorial Development of Fe-Co-Nb Thin Film Magnetic Nanocomposites.

A Fe-Co-Nb thin film materials library was deposited by combinatorial magnetron sputtering and investigated by high-throughput methods to identify new noncubic ferromagnetic phases, indicating that combinatorial experimentation is an efficient method to discover new ferromagnetic phases adequate for permanent magnet applications. Structural analysis indicated the formation of a new magnetic ternary compound (Fe,Co)3Nb with a hexagonal crystal structure (C36) embedded in an FeCo-based matrix. This nanocomposite exhibits characteristics of a two-phase ferromagnetic system, the so-called hard-soft nanocomposites, indicating that the new phase (Fe,Co)3Nb is ferromagnetic. Magnetic hysteresis loops at various angles revealed that the magnetization reversal process is governed by a domain wall pinning mechanism.

Highly Textured FeCo Thin Films Deposited by Low Temperature Pulsed Laser Deposition.

The effect of the deposition temperature (Tdep) on the crystallographic orientation of pulsed laser-deposited FeCo/MgO(100) thin film was determined by means of X-ray reflectivity and high resolution trasmission electron microscopy analysis and was correlated with the magnetic anisotropy properties measured by angle dependent hysteresis loops. Highly textured films with a bcc structure and very smooth surface were obtained even at room temperature, the film being [100] and [110] oriented, at Tdep=25 °C and 150 °C, respectively. The cubic symmetry is reflected in the angular dependence of remanent magnetization, showing a 4-fold character, whose in-plane distribution is consistent with the different crystallographic orientations of the films. The high structural quality, even at room temperature, is reflected in a high value of the saturation magnetization and low coercivity, matching the requirements for technological applications.

Bioactive, nanostructured Si-substituted hydroxyapatite coatings on titanium prepared by pulsed laser deposition.

AIMS: The aim of this work was to deposit silicon-substituted hydroxyapatite (Si-HAp) coatings on titanium for biomedical applications, since it is known that Si-HAp is able to promote osteoblastic cells activity, resulting in the enhanced bone ingrowth. MATERIALS AND METHODS: Pulsed laser deposition (PLD) method was used for coatings preparation. For depositions, Si-HAp targets (1.4 wt % of Si), made up from nanopowders synthesized by wet method, were used. RESULTS: Microstructural and mechanical properties of the produced coatings, as a function of substrate temperature, were investigated by scanning electron and atomic force microscopies, X-ray diffraction, Fourier transform infrared spectroscopy, and Vickers microhardness. In the temperature range of 400-600°C, 1.4-1.5 µm thick Si-HAp films, presenting composition similar to that of the used target, were deposited. The prepared coatings were dense, crystalline, and nanostructured, characterized by nanotopography of surface and enhanced hardness. Whereas the substrate temperature of 750°C was too high and led to the HAp decomposition. Moreover, the bioactivity of coatings was evaluated by in vitro tests in an osteoblastic/osteoclastic culture medium (α-Modified Eagle's Medium). CONCLUSIONS: The prepared bioactive Si-HAp coatings could be considered for applications in orthopedics and dentistry to improve the osteointegration of bone implants.

Evolution of the Pt layer deposited on MgO(001) by pulsed laser deposition as a function of the deposition parameters: a scanning tunneling microscopy and energy dispersive X-ray diffractometry/reflectometry study.

A combined ultrahigh vacuum scanning tunneling microscopy (STM-UHV) and energy dispersive X-ray diffractometry/reflectometry (EDXD/EDXR) study of the evolution of face-centered cubic (fcc) Pt layer growth on MgO(100) by pulsed laser deposition as a function of the process parameters such as deposition temperature and deposition duration has been carried out. The aim of this study is to define the best experimental conditions to obtain a controlled film deposition selective on the Pt growth direction (either [111] or [002]). The evolution of the Pt surface morphology as a function of the deposition temperature (T(dep)) from 300 to 700 degrees C has been studied with STM and ED techniques. Results show that the Pt surface, characterized at T(dep) = 300 degrees C by a 3D island morphology, evolves at higher temperatures to a morphology in which the original islands coexist with a distribution of orthogonal 2D stripes. The two features can be associated with the [111] and [002] Pt growth directions of the fcc phase, respectively. For T(dep) = 700 degrees C, the island morphology of the (111) face completely disappears, while the merging process of the (002) stripes reaches completion. The evolution of the morphology at T(dep) = 600 degrees C as a function of the deposition time and thickness has then been studied with STM-UHV, revealing an initial growth of mosaic-like 3D islands. These independent islands, already interconnected, expand along two orthogonal directions and, for longer deposition times, lead to the texture of orthogonal stripes. The EDXR characterization providing the morphological parameters of the films, i.e., thickness and roughness, confirms the above observation and quantifies the effect of such morphological changes on the surface roughness of the Pt film, an important parameter for applications of Pt films as underlayer in magnetic recording media.