Impact on the estimated dose of different tissue assignment strategies during partial breast irradiations with INTRABEAM.

PURPOSE: Partial breast irradiations with electronic brachytherapy or kilovoltage intraoperative radiotherapy devices such as Axxent or INTRABEAM are becoming more common every day. Breast is mainly composed of glandular and adipose tissues, which are not always clearly disentangled in planning breast CTs. In these cases, breast tissues are replaced with an average soft tissue, or even water. However, at kilovoltage energies, this may lead to large differences in the delivered dose, due to the dominance of photoelectric effect. Therefore, the aim of this work was to study the effect on the dose prescribed in breast with the INTRABEAM device using different soft tissue assignment strategies that would replace the adipose and glandular tissues that constitute the breast in cases where these tissues cannot be adequately distinguished in a CT scan. METHODS AND MATERIALS: Dose was computed with a Monte Carlo code in five patients with a 3 cm diameter INTRABEAM spherical applicator. Tissues within the breast were assigned following six different strategies: one based on the TG-43 recommendations, representing the whole breast as water of unity density, another one also water-based but with CT derived density, and the other four also based on CT-derived densities, using a single tissue resulting from different mixes of glandular and adipose tissues. These were compared against the reference dose computed in an accurately segmented CT, following TG-186 recommendations. Relative differences and dose ratios between the reference and the other tissue assignment strategies were obtained in three regions of interest inside the breast. RESULTS AND CONCLUSIONS: Dose planning in water-based tissues was found inaccurate for breast treatment with INTRABEAM, as it would incur in up to 30% under-prescription of dose. If accurate soft tissue assignments in the breast cannot be safely done, a single-tissue composition of 80% adipose and 20% glandular tissue, or even a 100% adipose tissue, would be recommended to avoid dose under-prescription.

UMC-PET: a fast and flexible Monte Carlo PET simulator.

Objective.The GPU-based Ultra-fast Monte Carlo positron emission tomography simulator (UMC-PET) incorporates the physics of the emission, transport and detection of radiation in PET scanners. It includes positron range, non-colinearity, scatter and attenuation, as well as detector response. The objective of this work is to present and validate UMC-PET as a a multi-purpose, accurate, fast and flexible PET simulator.Approach.We compared UMC-PET against PeneloPET, a well-validated MC PET simulator, both in preclinical and clinical scenarios. Different phantoms for scatter fraction (SF) assessment following NEMA protocols were simulated in a 6R-SuperArgus and a Biograph mMR scanner, comparing energy histograms, NEMA SF, and sensitivity for different energy windows. A comparison with real data reported in the literature on the Biograph scanner is also shown.Main results.NEMA SF and sensitivity estimated by UMC-PET where within few percent of PeneloPET predictions. The discrepancies can be attributed to small differences in the physics modeling. Running in a 11 GB GeForce RTX 2080 Ti GPU, UMC-PET is ∼1500 to ∼2000 times faster than PeneloPET executing in a single core Intel(R) Xeon(R) CPU W-2155 @ 3.30 GHz.Significance.UMC-PET employs a voxelized scheme for the scanner, patient adjacent objects (such as shieldings or the patient bed), and the activity distribution. This makes UMC-PET extremely flexible. Its high simulation speed allows applications such as MC scatter correction, faster SRM estimation for complex scanners, or even MC iterative image reconstruction.

XIORT-MC: A real-time MC-based dose computation tool for low- energy X-rays intraoperative radiation therapy.

PURPOSE: The INTRABEAM system is a miniature accelerator for low-energy X-ray Intra-Operative Radiation Therapy (IORT), and it could benefit from a fast and accurate dose computation tool. With regards to accuracy, dose computed with Monte Carlo (MC) simulations are the gold standard, however, they require a large computational effort and consequently they are not suitable for real-time dose planning. This work presents a comparison of the implementation on Graphics Processing Unit (GPU) of two different dose calculation algorithms based on MC phase-space (PHSP) information to compute dose distributions for the INTRABEAM device within seconds and with the accuracy of realistic MC simulations. METHODS: The MC-based algorithms we present incorporate photoelectric, Compton and Rayleigh effects for the interaction of low-energy X-rays. XIORT-MC (X-ray Intra-Operative Radiation Therapy Monte Carlo) includes two dose calculation algorithms; a Woodcock-based MC algorithm (WC-MC) and a Hybrid MC algorithm (HMC), and it is implemented in CPU and in GPU. Detailed MC simulations have been generated to validate our tool in homogeneous and heterogeneous conditions with all INTRABEAM applicators, including three clinically realistic CT-based simulations. A performance study has been done to determine the acceleration reached with the code, in both CPU and GPU implementations. RESULTS: Dose distributions were obtained with the HMC and the WC-MC and compared to standard reference MC simulations with more than 95% voxels fulfilling a 7%-0.5 mm gamma evaluation in all the cases considered. The CPU-HMC is 100 times more efficient than the reference MC, and the CPU-WC-MC is about 50 times more efficient. With the GPU implementation, the particle tracking of the WC-MC is faster than the HMC, with the extraction of the particle's information from the PHSP file taking a major part of the time. However, thanks to the variance reduction techniques implemented in the HMC, up to 400 times less particles are needed in the HMC to reach the same level of noise than the WC-MC. Therefore, in our implementation for INTRABEAM energies, the HMC is about 1.3 times more efficient than the WC-MC in an NVIDIA GeForce GTX 1080 Ti card and about 5.5 times more efficient in an NVIDIA GeForce RTX 3090. Dose with noise below 5% has been obtained in realistic situations in less than 5 s with the WC-MC and in less than 0.5 s with the HMC. CONCLUSIONS: The XIORT-MC is a dose computation tool designed to take full advantage of modern GPUs, making possible to obtain MC-grade accurate dose distributions within seconds. Its high speed allows a real-time dose calculation that includes the realistic effects of the beam in voxelized geometries of patients. It can be used as a dose-planning tool in the operating room during a XIORT treatment with any INTRABEAM device.