Covalent organic frameworks as highly versatile materials for the removal and electrochemical sensing of organic pollutants.

The presence of persistent organic compounds in water has become a worldwide issue due to its resistance to natural degradation, inducing its environmental resilience. Therefore, the accumulation in water bodies, soils, and humans produces toxic effects. Also, low levels of organic pollutants can lead to serious human health issues, such as cancer, chronic diseases, thyroid complications, immune system suppression, etc. Therefore, developing efficient and economically viable remediation strategies motivates researchers to delve into novel domains within material science. Moreover, finding approaches to detect pollutants in drinking water systems is vital for safeguarding water safety and security. Covalent organic frameworks (COFs) are valuable materials constructed through strong covalent interactions between blocked monomers. These materials have tremendous potential in removing and detecting persistent organic pollutants due to their high adsorption capacity, large surface area, tunable porosity, porous structure, and recyclability. This review discusses various synthesis routes for constructing non-functionalized and functionalized COFs and their application in the remediation and electrochemical sensing of persistent organic compounds from contaminated water sources. The development of COF-based materials has some major challenges that need to be addressed for their suitability in the industrial configuration. This review also aims to highlight the importance of COFs in the environmental remediation application with detailed scrutiny of their challenges and outcomes in the current research scenario.

Zinc-aluminum layered double hydroxide and double oxide for room-temperature oxidation of sulfur dioxide gas.

Sulfur dioxide (SO2) gas at trace levels challenges the consumption of fuel gases and cleaning of flue gases originating from diverse anthropogenic sources. We have demonstrated Zn-Al layered double hydroxide (LDH) and layered double oxide (LDO) as low-cost and effective adsorbents in removing lowly concentrated SO2 gas at room temperature. Water in the adsorbent bed significantly improved the performance, where the maximum adsorption capacity of 38.0 mg g-1 was achieved for LDO. Based on the spectroscopic findings, the adsorbed gas molecules were oxidized to surface-bound sulfate/bisulfate species, showing complete mineralization of SO2 molecules. By employing an inexpensive NaOH-H2O2 solution-based regeneration strategy, we successfully regenerated the spent LDO, significantly restoring its gas uptake capacity. The regenerated oxide exhibited an increased gas uptake capacity ranging from 38.0 to 98.5 mg g-1, highlighting the practicality and economic feasibility of our approach. LDH/LDO materials are promising regenerable adsorbents for removing low concentrations of SO2 gas in ambient conditions.

Novel application of sodium manganese oxide in removing acidic gases in ambient conditions.

In this study, we have demonstrated the application of sodium manganese oxide for the chemisorption of toxic acidic gases at room temperature. The fabricated alkali ceramic has Na0.4MnO2, Na2Mn3O7, and NaxMnO2 phases with a surface area of 2.6 m2 g-1. Na-Mn oxide was studied for oxidation of H2S, SO2, and NO2 gases in the concentration range of 100-500 ppm. The material exhibited a high uptake capacity of 7.13, 0.75, and 0.53 mmol g-1 for H2S, SO2, and NO2 in wet conditions, respectively. The material was reusable when regenerated simply by soaking the spent oxide in a NaOH-H2O2 solution. While the H2S chemisorption process was accompanied by sulfide, sulfur, and sulfate formation, the SO2 chemisorption process yielded only sulfate ions. The NO2 chemisorption process was accomplished by its conversion to nitrite and nitrate ions. Thus, the present work is one of the first reports on alkali ceramic utilization for room-temperature mineralization of acidic gases.

Mercury remediation from wastewater through its spontaneous adsorption on non-functionalized inverse spinel magnetic ferrite nanoparticles.

In this study, inverse spinel cubic ferrites MFe2O4 (M = Fe2+, and Co2+) have been fabricated for the high-capacity adsorptive removal of Hg(II) ions. The PXRD analysis confirmed ferrites with the presence of residual NaCl. The surface area of Fe3O4 (Fe-F) and CoFe2O4 (Co-F) material was 69.1 and 45.2 m2 g-1, respectively. The Co-F and Fe-F showed the maximum Hg(II) adsorption capacity of 459 and 436 mg g-1 at pH 6. The kinetic and isotherms models suggested a spontaneous adsorption process involving chemical forces over the ferrite adsorbents. The Hg(II) adsorption process, probed by X-ray photoelectron spectroscopy (XPS), confirmed the interaction of Hg(II) ions with the surface hydroxyl groups via a complexation mechanism instead of proton exchange at pH 6 with the involvement of chloride ions. Thus, this study demonstrates a viable and cost-effective solution for the efficient remediation of Hg ions from wastewater using non-functionalized ferrite adsorbents. This study also systematically investigates the kinetics and isotherm mechanism of Hg(II) adsorption onto ferrites and reports one of the highest Hg(II) adsorption capacities among other ferrite-based adsorbents.

Fabrication of Na0.4MnO2 Microrods for Room-Temperature Oxidation of Sulfurous Gases.

Phase pure Na0.4MnO2 microrods crystallized in the orthorhombic symmetry were fabricated for the wet oxidation of H2S and SO2 gases at room temperature. The material was found highly effective for the mineralization of low concentrations of acidic gases. The material was fully regenerable after soaking in a basic H2O2 solution.

Radiolabeled nanomaterials for biomedical applications: radiopharmacy in the era of nanotechnology.

BACKGROUND: Recent advances in nanotechnology have offered new hope for cancer detection, prevention, and treatment. Nanomedicine, a term for the application of nanotechnology in medical and health fields, uses nanoparticles for several applications such as imaging, diagnostic, targeted cancer therapy, drug and gene delivery, tissue engineering, and theranostics. RESULTS: Here, we overview the current state-of-the-art of radiolabeled nanoparticles for molecular imaging and radionuclide therapy. Nanostructured radiopharmaceuticals of technetium-99m, copper-64, lutetium-177, and radium-223 are discussed within the scope of this review article. CONCLUSION: Nanoradiopharmaceuticals may lead to better development of theranostics inspired by ingenious delivery and imaging systems. Cancer nano-theranostics have the potential to lead the way to more specific and individualized cancer treatment.