RESUMO
Oxylipins are powerful signalling compounds derived from polyunsaturated fatty acids (PUFAs) and involved in regulating the immune system response. A mass spectrometry-based method was developed and validated for the targeted profiling of 52 oxylipins (e.g., isoprostanoids, prostaglandins, epoxy- and hydroxy-fatty acids, specialized pro-resolving mediators) and 4 PUFAs in small urinary extracellular vesicles (uEVs). Ultrasound-assisted extraction using a 50:50 v/v MeOH:H2O mixture ensured optimal analytical performances. Limits of detection ranged between 10 and 400 pg/mL for oxylipins and 0.10-3 ng/mL for PUFAs. Satisfactory recoveries (85-116 %) and good intra- and inter-day precisions (RSD ≤15 %) were obtained for all the analytes. The reliability of the procedure was tested in a real case scenario by monitoring ultramarathon runners during the world Tor des Géants® (TDG) race. Both F2- and E2-isoprostanes were detected in small uEVs of the ultramarathon runners, suggesting the onset of an oxidant insult. 5-F2t-IsoP exhibited significant pre- to post-race variations, thus potentially representing a non-invasive marker of in-vivo lipid peroxidation. The presence of specialized pro-resolving mediators suggests the activation of pro-resolution signalling cascade resolving inflammation. These outcomes may help manage post-exercise recovery and improve training.
Assuntos
Vesículas Extracelulares , Isoprostanos , Corrida , Espectrometria de Massas em Tandem , Humanos , Espectrometria de Massas em Tandem/métodos , Vesículas Extracelulares/química , Cromatografia Líquida de Alta Pressão/métodos , Isoprostanos/urina , Isoprostanos/análise , Masculino , Adulto , Ácidos Graxos Insaturados/análise , Ácidos Graxos Insaturados/urina , Oxilipinas/análise , Oxilipinas/urina , Microextração em Fase Sólida , Pessoa de Meia-IdadeRESUMO
The escalating global incidence of infectious diseases caused by pathogenic bacteria, especially in developing countries, emphasises the urgent need for rapid and portable pathogen detection devices. This study introduces a sensitive and specific electrochemical biosensing platform utilising cost-effective electrodes fabricated by inkjet-printing gold and silver nanoparticles on a plastic substrate. The biosensor exploits the CRISPR/Cas12a system for detecting a specific DNA sequence selected from the genome of the target pathogen. Upon detection, the trans-activity of Cas12a/gRNA is triggered, leading to the cleavage of rationally designed single-strand DNA reporters (linear and hairpin) labelled with methylene blue (ssDNA-MB) and bound to the electrode surface. In principle, this sensing mechanism can be adapted to any bacterium by choosing a proper guide RNA to target a specific sequence of its DNA. The biosensor's performance was assessed for two representative pathogens (a Gram-negative, Escherichia coli, and a Gram-positive, Staphylococcus aureus), and results obtained with inkjet-printed gold electrodes were compared with those obtained by commercial screen-printed gold electrodes. Our results show that the use of inkjet-printed nanostructured gold electrodes, which provide a large surface area, in combination with the use of hairpin reporters containing a poly-T loop can increase the sensitivity of the assay corresponding to a signal variation of 86%. DNA targets amplified from various clinically isolated bacteria, have been tested and demonstrate the potential of the proposed platform for point-of-need applications.
Assuntos
Técnicas Biossensoriais , Sistemas CRISPR-Cas , Escherichia coli , Ouro , Nanopartículas Metálicas , Staphylococcus aureus , Técnicas Biossensoriais/instrumentação , Ouro/química , Staphylococcus aureus/isolamento & purificação , Staphylococcus aureus/genética , Escherichia coli/isolamento & purificação , Escherichia coli/genética , Nanopartículas Metálicas/química , Prata/química , DNA Bacteriano/análise , DNA Bacteriano/genética , Técnicas Eletroquímicas/métodos , Humanos , Nanoestruturas/química , DNA de Cadeia Simples/química , Eletrodos , Impressão , Proteínas de Bactérias/genética , Endodesoxirribonucleases , Proteínas Associadas a CRISPRRESUMO
The possibility of generating regions with different electronic properties within the same organic semiconductor thin film could offer novel opportunities for designing and fabricating organic electronic devices and circuits. This study introduces a new approach based on a novel type of highly processable polymer precursor that can yield two different conjugated polymers characterized by complementary electronic properties, i.e. promoting electron or hole transport, from the same starting material. In particular, these multipotent precursors comprise functionalized dihydroanthracene units that can offer several functionalization opportunities to improve the solubility or insert specific functionalities. This strategy also allows for the preparation of high-molecular-weight conjugated polymers comprising diethynylanthracene and anthraquinone units without the need for solubilizing side chains. Thin films of the polymer precursor can be used, after solid-state transformations, to prepare single organic layers comprising regions characterized by different chemical nature and electronic properties. Here, we present a detailed characterization of the chemical and electronic properties of the precursor and the obtained conjugated polymers, showing how it is possible to harvest their characteristics for potential applications such as electrochromic surfaces and organic field-effect transistors.
RESUMO
Oxylipins are important signalling compounds that are significantly involved in the regulation of the immune system and the resolution of inflammation. Lipid metabolism is strongly activated upon SARS-CoV-2 infection, however the modulating effects of oxylipins induced by different variants remain unexplored. Here, we compare the plasma profiles of thirty-seven oxylipins and four PUFAs in subjects infected with Wild-type, Alpha (B.1.1.7), Delta (B.1.617.2), and Omicron (B.1.1.529) variants. The results suggest that oxidative stress and inflammation resulting from COVID-19 were highly dependent on the SARS-CoV-2 variant, and that the Wild-type elicited the strongest inflammatory storm. The Alpha and Delta variants induced a comparable lipid profile alteration upon infection, which differed significantly from Omicron. The latter variant increased the levels of pro-inflammatory mediators and decreased the levels of omega-3 PUFA in infected patients. We speculate that changes in therapeutics, vaccination, and prior infections may have a role in the alteration of the oxylipin profile besides viral mutations. The results shed new light on the evolution of the inflammatory response in COVID-19.
Assuntos
COVID-19 , SARS-CoV-2 , Humanos , Oxilipinas , Ácidos Graxos Insaturados , InflamaçãoRESUMO
Variations in salivary short-chain fatty acids and hydroxy acids (e.g., lactic acid, and 3-hydroxybutyric acid) levels have been suggested to reflect the dysbiosis of human gut microbiota, which represents an additional factor involved in the onset of heart failure (HF) disease. The physical-chemical properties of these metabolites combined with the complex composition of biological matrices mean that sample pre-treatment procedures are almost unavoidable. This work describes a reliable, simple, and organic solvent free protocol for determining short-chain fatty acids and hydroxy acids in stimulated saliva samples collected from heart failure, obese, and hypertensive patients. The procedure is based on in-situ pentafluorobenzyl bromide (PFB-Br) derivatization and HiSorb sorptive extraction coupled to thermal desorption and gas chromatography-tandem mass spectrometry. The HiSorb extraction device is completely compatible with aqueous matrices, thus saving on time and materials associated with organic solvent-extraction methods. A Central Composite Face-Centred experimental design was used for the optimization of the molar ratio between PFB-Br and target analytes, the derivatization temperature, and the reaction time which were 100, 60 °C, and 180 min, respectively. Detection limits in the range 0.1-100 µM were reached using a small amount of saliva (20 µL). The use of sodium acetate-1-13C as an internal standard improved the intra- and inter-day precision of the method which ranged from 10 to 23%. The optimized protocol was successfully applied for what we believe is the first time to evaluate the salivary levels of short chain fatty acids and hydroxy acids in saliva samples of four groups of patients: i) patients admitted to hospital with acute HF symptoms, ii) patients with chronic HF symptoms, iii) patients without HF symptoms but with obesity, and iv) patients without HF symptoms but with hypertension. The first group of patients showed significantly higher levels of salivary acetic acid and lactic acid at hospital admission as well as the lowest values of hexanoic acid and heptanoic acid. Moreover, the significant high levels of acetic acid, propionic acid, and butyric acid observed in HF respect to the other patients suggest the potential link between oral bacteria and gut dysbiosis.
Assuntos
Insuficiência Cardíaca , Hidroxiácidos , Humanos , Hidroxiácidos/análise , Disbiose , Cromatografia Gasosa-Espectrometria de Massas/métodos , Ácidos Graxos Voláteis/análise , Ácido Acético , Ácido Butírico , Ácido Láctico/análise , Ácidos GraxosRESUMO
This paper describes the AEOLUS pilot study which combines breath analysis with cardiopulmonary exercise testing (CPET) and an echocardiographic examination for monitoring heart failure (HF) patients. Ten consecutive patients with a prior clinical diagnosis of HF with reduced left ventricular ejection fraction were prospectively enrolled together with 15 control patients with cardiovascular risk factors, including hypertension, type II diabetes or chronic ischemic heart disease. Breath samples were collected at rest and during CPET coupled with exercise stress echocardiography (CPET-ESE) protocol by means of needle trap micro-extraction and were analyzed through gas-chromatography coupled with mass spectrometry. The protocol also involved using of a selected ion flow tube mass spectrometer for a breath-by-breath isoprene and acetone analysis during exercise. At rest, HF patients showed increased breath levels of acetone and pentane, which are related to altered oxidation of fatty acids and oxidative stress, respectively. A significant positive correlation was observed between acetone and the gold standard biomarker NT-proBNP in plasma (r= 0.646,p< 0.001), both measured at rest. During exercise, some exhaled volatiles (e.g., isoprene) mirrored ventilatory and/or hemodynamic adaptation, whereas others (e.g., sulfide compounds and 3-hydroxy-2-butanone) depended on their origin. At peak effort, acetone levels in HF patients differed significantly from those of the control group, suggesting an altered myocardial and systemic metabolic adaptation to exercise for HF patients. These preliminary data suggest that concomitant acquisition of CPET-ESE and breath analysis is feasible and might provide additional clinical information on the metabolic maladaptation of HF patients to exercise. Such information may refine the identification of patients at higher risk of disease worsening.
Assuntos
Diabetes Mellitus Tipo 2 , Insuficiência Cardíaca , Humanos , Teste de Esforço/métodos , Volume Sistólico , Acetona , Projetos Piloto , Função Ventricular Esquerda , Testes Respiratórios/métodos , Insuficiência Cardíaca/diagnóstico por imagem , Ecocardiografia/métodosRESUMO
Climate change due to the continuous increase in the release of green-house gasses associated with anthropogenic activity has made a significant impact on the sustainability of life on our planet. Methane (CH4) is a green-house gas whose concentrations in the atmosphere are on the rise. CH4 measurement is important for both the environment and the safety at the industrial and household level. Methanotrophs are distinguished for their unique characteristic of using CH4 as the sole source of carbon and energy, due to the presence of the methane monooxygenases that oxidize CH4 under ambient temperature conditions. This has attracted interest in the use of methanotrophs in biotechnological applications as well as in the development of biosensing systems for CH4 quantification and monitoring. Biosensing systems using methanotrophs rely on the use of whole microbial cells that oxidize CH4 in presence of O2, so that the CH4 concentration is determined in an indirect manner by measuring the decrease of O2 level in the system. Although several biological properties of methanotrophic microorganisms still need to be characterized, different studies have demonstrated the feasibility of the use of methanotrophs in CH4 measurement. This review summarizes the contributions in methane biosensing systems and presents a prospective of the valid use of methanotrophs in this field. KEY POINTS: ⢠Methanotroph environmental relevance in methane oxidation ⢠Methanotroph biotechnological application in the field of biosensing ⢠Methane monooxygenase as a feasible biorecognition element in biosensors.
Assuntos
Gases , Metano , Oxirredução , Biotecnologia , Mudança Climática , Microbiologia do SoloRESUMO
Heterometallic Chini-type clusters [Pt6-xNix(CO)12]2- (x = 0-6) were obtained by reactions of [Pt6(CO)12]2- with Ni-clusters such as [Ni6(CO)12]2-, [Ni9(CO)18]2- and [H2Ni12(CO)21]2-, or from [Pt9(CO)18]2- and [Ni6(CO)12]2-. The Pt/Ni composition of [Pt6-xNix(CO)12]2- (x = 0-6) depended on the nature of the reagents employed and their stoichiometry. Reactions of [Pt9(CO)18]2- with [Ni9(CO)18]2- and [H2Ni12(CO)21]2-, as well as reactions of [Pt12(CO)24]2- with [Ni6(CO)12]2-, [Ni9(CO)18]2- and [H2Ni12(CO)21]2-, afforded [Pt9-xNix(CO)18]2- (x = 0-9) species. [Pt6-xNix(CO)12]2- (x = 1-5) were converted into [Pt12-xNix(CO)21]4- (x = 2-10) upon heating in CH3CN at 80 °C, with almost complete retention of the Pt/Ni composition. Reaction of [Pt12-xNix(CO)21]4- (x ≈ 8) with HBF4·Et2O afforded the [HPt14+xNi24-x(CO)44]5- (x ≈ 0.7) nanocluster. Finally, [Pt19-xNix(CO)22]4- (x = 2-6) could be obtained by heating [Pt9-xNix(CO)18]2- (x = 1-3) in CH3CN at 80 °C, or [Pt6-xNix(CO)12]2- (2-4) in DMSO at 130 °C. The molecular structures of these new alloy nanoclusters have been determined by single crystal X-ray diffraction. The site preference of Pt and Ni within their metal cages has been computationally investigated. The electrochemical and IR spectroelectrochemical behavior of [Pt19-xNix(CO)22]4- (x = 3.11) has been studied and compared to the isostructural homometallic nanocluster [Pt19(CO)22]4-.
RESUMO
Cardiovascular diseases (CVDs) are the leading cause of premature death and disability in humans and their incidence continues to increase. Oxidative stress and inflammation have been recognized as key pathophysiological factors in cardiovascular events. The targeted modulation of the endogenous mechanisms of inflammation, rather than its simple suppression, will become key in treating chronic inflammatory diseases. A comprehensive characterization of the signalling molecules involved in inflammation, such as endogenous lipid mediators, is thus needed. Here, we propose a powerful MS-based platform for the simultaneous quantitation of sixty salivary lipid mediators in CVD samples. Saliva, which represents a non-invasive and painless alternative to blood, was collected from patients suffering from acute and chronic heart failure (AHF and CHF, respectively), obesity and hypertension. Of all the patients, those with AHF and hypertension showed higher levels of isoprostanoids, which are key indexes of oxidant insult. Compared to the obese population, AHF patients showed lower levels (p < 0.02) of antioxidant omega-3 fatty acids, in line with the "malnutrition-inflammation complex syndrome" typical of HF patients. At hospital admission, AHF patients showed significantly higher levels (p < 0.001) of omega-3 DPA and lower levels (p < 0.04) of lipoxin B4 than CHF patients, suggesting a lipid rearrangement typical of the failing heart during acute decompensation. If confirmed, our results highlight the potential use of lipid mediators as predictive markers of re-acutisation episodes, thus providing opportunities for preventive intervention and a reduction in hospitalizations.
Assuntos
Doenças Cardiovasculares , Ácidos Graxos Ômega-3 , Insuficiência Cardíaca , Hipertensão , Humanos , Inflamação , Doença Crônica , Obesidade , Mediadores da InflamaçãoRESUMO
Sepsis is defined as a systemic inflammatory dysfunction strictly associated with infectious diseases, which represents an important health issue whose incidence is continuously increasing worldwide. Nowadays, sepsis is considered as one of the main causes of death that mainly affects critically ill patients in clinical settings, with a higher prevalence in low-income countries. Currently, sepsis management still represents an important challenge, since the use of traditional techniques for the diagnosis does not provide a rapid response, which is crucial for an effective infection management. Biosensing systems represent a valid alternative due to their characteristics such as low cost, portability, low response time, ease of use and suitability for point of care/need applications. This review provides an overview of the infectious agents associated with the development of sepsis and the host biomarkers suitable for diagnosis and prognosis. Special focus is given to the new emerging biosensing technologies using electrochemical and optical transduction techniques for sepsis diagnosis and management.
Assuntos
Técnicas Biossensoriais , Sepse , Humanos , Técnicas Biossensoriais/métodos , Sepse/diagnóstico , Diagnóstico Precoce , Biomarcadores , Sistemas Automatizados de Assistência Junto ao LeitoRESUMO
Fused deposition modeling 3D printing (FDM-3DP) employing electrically conductive filaments has recently been recognized as an exceptionally attractive tool for the manufacture of sensing devices. However, capabilities of 3DP electrodes to measure electric properties of materials have not yet been explored. To bridge this gap, we employ bimaterial FDM-3DP combining electrically conductive and insulating filaments to build an integrated platform for sensing conductivity and permittivity of liquids by impedance measurements. The functionality of the device is demonstrated by measuring conductivity of aqueous potassium chloride solution and bottled water samples and permittivity of water, ethanol, and their mixtures. We further implement an original idea of applying impedance measurements to investigate dimensions of 3DP channels as base structures of microfluidic devices, complemented by their optical microscopic analysis. We demonstrate that FDM-3DP allows the manufacture of microchannels of width down to 80 µm.
Assuntos
Água Potável , Microfluídica , Etanol , Cloreto de Potássio , Impressão TridimensionalRESUMO
The molecular Pt nanocluster [Pt27(CO)31]4- (14-) was obtained by thermal decomposition of [Pt15(CO)30]2- in tetrahydrofuran under a H2 atmosphere. The reaction of 14- with increasing amounts of HBF4·Et2O afforded the previously reported [Pt26(CO)32]2- (32-) and [Pt26(CO)32]- (3-). The new nanocluster 14- was characterized by IR and UV-visible spectroscopy, single-crystal X-ray diffraction, direct-current superconducting quantum interference device magnetometry, cyclic voltammetry, IR spectroelectrochemistry (IR SEC), and electrochemical impedance spectroscopy. The cluster displays a cubic-close-packed Pt27 framework generated by the overlapping of four ABCA layers, composed of 3, 7, 11, and 6 atoms, respectively, that encapsulates a fully interstitial Pt4 tetrahedron. One Pt atom is missing within layer 3, and this defect (vacancy) generates local deformations within layers 2 and 3. These local deformations tend to repair the defect (missing atom) and increase the number of Pt-Pt bonding contacts, minimizing the total energy. The cluster 14- is perfectly diamagnetic and displays a rich electrochemical behavior. Indeed, six different oxidation states have been characterized by IR SEC, unraveling the series of 1n- (n = 3-8) isostructural nanoclusters. Computational studies have been carried out to further support the interpretation of the experimental data.
RESUMO
The composition of exhaled breath derives from an intricate combination of normal and abnormal physiological processes that are modified by the consumption of food and beverages, circadian rhythms, bacterial infections, and genetics as well as exposure to xenobiotics. This complexity, which results wide intra- and inter-individual variability and is further influenced by sampling conditions, hinders the identification of specific biomarkers and makes it difficult to differentiate between pathological and nominally healthy subjects. The identification of a 'normal' breath composition and the relative influence of the aforementioned parameters would make breath analyses much faster for diagnostic applications. We thus compared, for the first time, the breath composition of age-matched volunteers following a vegan and a Mediterranean omnivorous diet in order to evaluate the impact of diet on breath composition. Mixed breath was collected from 38 nominally healthy volunteers who were asked to breathe into a 2 l handmade Nalophan bag. Exhalation flow rate and carbon dioxide values were monitored during breath sampling. An aliquot (100 ml) of breath was loaded into a sorbent tube (250 mg of Tenax GR, 60/80 mesh) before being analyzed by thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS). Breath profiling using TD-GC-MS analysis identified five compounds (methanol, 1-propanol, pentane, hexane, and hexanal), thus enabling differentiation between samples collected from the different group members. Principal component analysis showed a clear separation between groups, suggesting that breath analysis could be used to study the influence of dietary habits in the fields of nutrition and metabolism. Surprisingly, one Italian woman and her brother showed extremely low breath isoprene levels (about 5 pbv), despite their normal lipidic profile and respiratory data, such as flow rate and pCO2. Further investigations to reveal the reasons behind low isoprene levels in breath would help reveal the origin of isoprene in breath.
Assuntos
Dieta Vegana , Compostos Orgânicos Voláteis , Biomarcadores/análise , Testes Respiratórios/métodos , Expiração , Feminino , Cromatografia Gasosa-Espectrometria de Massas , Humanos , Masculino , Compostos Orgânicos Voláteis/análiseRESUMO
The key role of inflammation in COVID-19 induced many authors to study the cytokine storm, whereas the role of other inflammatory mediators such as oxylipins is still poorly understood. IMPRECOVID was a monocentric retrospective observational pilot study with COVID-19 related pneumonia patients (n = 52) admitted to Pisa University Hospital between March and April 2020. Our MS-based analytical platform permitted the simultaneous determination of sixty plasma oxylipins in a single run at ppt levels for a comprehensive characterisation of the inflammatory cascade in COVID-19 patients. The datasets containing oxylipin and cytokine plasma levels were analysed by principal component analysis (PCA), computation of Fisher's canonical variable, and a multivariate receiver operating characteristic (ROC) curve. Differently from cytokines, the panel of oxylipins clearly differentiated samples collected in COVID-19 wards (n = 43) and Intensive Care Units (ICUs) (n = 27), as shown by the PCA and the multivariate ROC curve with a resulting AUC equal to 0.92. ICU patients showed lower (down to two orders of magnitude) plasma concentrations of anti-inflammatory and pro-resolving lipid mediators, suggesting an impaired inflammation response as part of a prolonged and unsolvable pro-inflammatory status. In conclusion, our targeted oxylipidomics platform helped shedding new light in this field. Targeting the lipid mediator class switching is extremely important for a timely picture of a patient's ability to respond to the viral attack. A prediction model exploiting selected lipid mediators as biomarkers seems to have good chances to classify patients at risk of severe COVID-19.
Assuntos
COVID-19 , Oxilipinas , Humanos , Inflamação , Estudos Retrospectivos , SARS-CoV-2RESUMO
The molecular nanocluster [Ni36-xPd5+x(CO)46]6- (x = 0.41) (16-) was obtained from the reaction of [NMe3(CH2Ph)]2[Ni6(CO)12] with 0.8 molar equivalent of [Pd(CH3CN)4][BF4]2 in tetrahydrofuran (thf). In contrast, [Ni37-xPd7+x(CO)48]6- (x = 0.69) (26-) and [HNi37-xPd7+x(CO)48]5- (x = 0.53) (35-) were obtained from the reactions of [NBu4]2[Ni6(CO)12] with 0.9-1.0 molar equivalent of [Pd(CH3CN)4][BF4]2 in thf. After workup, 35- was extracted in acetone, whereas 26- was soluble in CH3CN. The total structures of 16-, 26-, and 35- were determined with atomic precision by single-crystal X-ray diffraction. Their metal cores adopted cubic close packed structures and displayed both substitutional and compositional disorder, in light of the fact that some positions could be occupied by either Ni or Pd. The redox behavior of these new Ni-Pd molecular alloy nanoclusters was investigated by cyclic voltammetry and in situ infrared spectroelectrochemistry. All three compounds 16-, 26-, and 35- displayed several reversible redox processes and behaved as electron sinks and molecular nanocapacitors. Moreover, to gain insight into the factors that affect the current-potential profiles, cyclic voltammograms were recorded at both Pt and glassy carbon working electrodes and electrochemical impedance spectroscopy experiments performed for the first time on molecular carbonyl nanoclusters.
RESUMO
Matrix metalloproteinases (MMPs) are an important factor in cancer progression and metastasis, especially gelatinases MMP-2 and MMP-9. A simple methodology for their detection and monitoring is highly desirable. Molecular probes have been very widely and successfully applied to study the activity of MMPs in cellular processes in vitro. We thus synthesized a small compound library of MMP-2 and MMP-9 binding probes based on drug molecules and endowed with free amine groups for the functionalization of transducer surfaces. In this study, we combined experimental results obtained by a kinetic fluorogenic peptide substrate cleavage assay with molecular modeling studies in order to assess the ability of the probe to bind to their target enzymes. The synthesized biphenyl substituted lysine derivatives showed IC50-values in the low nanomolar concentration range against MMP-2 (ligands 3a-d: 3 nM to 8 µM, ligands 4a-d: 45 nM to 350 µM) and low micromolar range against MMP-9 (ligands 3a-d: 350 nM to 60 µM, ligands 4a-d: 5 µM to 600 µM), with a selectivity up to more than 160-fold for MMP-2. The experimental results correlated well with molecular modelling with FleXAID and X-score functions. We showed that in our compound series, the side chain remained far away from the S1' cavity and the ligand for all the docked minima. Ligands 4a-d with their free amine group on the side chain may thus be bound to transducer surfaces for the fabrication of sensors, while retaining their activity against their target enzymes.
Assuntos
Compostos de Bifenilo/química , Lisina/análogos & derivados , Metaloproteinase 2 da Matriz/química , Metaloproteinase 9 da Matriz/química , Inibidores de Metaloproteinases de Matriz/química , Sítios de Ligação , Desenho de Fármacos , Humanos , Cinética , Lisina/metabolismo , Lisina/farmacologia , Metaloproteinase 2 da Matriz/metabolismo , Metaloproteinase 9 da Matriz/metabolismo , Inibidores de Metaloproteinases de Matriz/metabolismo , Simulação de Acoplamento Molecular , Ligação Proteica , Relação Estrutura-AtividadeRESUMO
The rapid and selective identification in the clinical setting of pathogenic bacteria causing healthcare associated infections (HAIs) and in particular blood stream infections (BSIs) is a major challenge, as the number of people affected worldwide and the associated mortality are on the rise. In fact, traditional laboratory techniques such culture and polymerase chain reaction (PCR)-based methodologies are often associated to long turnaround times, which justify the pressing need for the development of rapid, specific and portable point of care devices. The recently discovered clustered regularly interspaced short palindromic repeat loci (CRISPR) and the new class of programmable endonuclease enzymes called CRISPR associated proteins (Cas) have revolutionised molecular diagnostics. The use of Cas proteins in optical and electrochemical biosensing devices has significantly improved the detection of nucleic acids in clinical samples. In this study, a CRISPR/Cas12a system was coupled with electrochemical impedance spectroscopy (EIS) measurements to develop a label-free biosensing assay for the detection of Escherichia coli and Staphylococcus aureus, two bacterial species commonly associated to BSI infections. The programmable Cas12a endonuclease activity, induced by a specific guide RNA (gRNA), and the triggered collateral activity were assessed in in vitro restriction analyses, and evaluated thanks to impedance measurements using a modified gold electrode. The Cas12a/gRNA system was able to specifically recognize amplicons from different clinical isolates of E. coli and S. aureus with a limit of detection of 3 nM and a short turnaround time approximately of 1.5 h. To the best of our knowledge, this is the first biosensing device based on CRISPR/Cas12a label free impedance assay.
Assuntos
Técnicas Biossensoriais , Sistemas CRISPR-Cas , DNA Bacteriano/genética , Impedância Elétrica , Escherichia coli/genética , Humanos , Staphylococcus aureus/genéticaRESUMO
Notwithstanding its relatively recent discovery, graphene has gone through many evolution steps and inspired a multitude of applications in many fields, from electronics to life science. The recent advancements in graphene production and patterning, and the inclusion of two-dimensional (2D) graphenic materials in three-dimensional (3D) superstructures, further extended the number of potential applications. In this Review, we focus on laser-induced graphene (LIG), an intriguing 3D porous graphenic material produced by direct laser scribing of carbonaceous precursors, and on its applications in chemical sensors and biosensors. LIG can be shaped in different 3D forms with a high surface-to-volume ratio, which is a valuable characteristic for sensors that typically rely on phenomena occurring at surfaces and interfaces. Herein, an overview of LIG, including synthesis from various precursors, structure, and characteristic properties, is first provided. The discussion focuses especially on transport and surface properties, and on how these can be controlled by tuning the laser processing. Progresses and trends in LIG-based chemical sensors are then reviewed, discussing the various transduction mechanisms and different LIG functionalization procedures for chemical sensing. A comparative evaluation of sensors performance is then provided. Finally, sensors for glucose detection are reviewed in more detail, since they represent the vast majority of LIG-based chemical sensors.
RESUMO
COVID-19 is a highly transmissible respiratory illness that has rapidly spread all over the world causing more than 115 million cases and 2.5 million deaths. Most epidemiological projections estimate that the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) virus causing the infection will circulate in the next few years and raise enormous economic and social issues. COVID-19 has a dramatic impact on health care systems and patient management, and is delaying or stopping breath research activities due to the risk of infection to the operators following contact with patients, potentially infected samples or contaminated equipment. In this scenario, we investigated whether virus inactivation procedures, based on a thermal treatment (60 °C for 1 h) or storage of tubes at room temperature for 72 h, could be used to allow the routine breath analysis workflow to carry on with an optimal level of safety during the pandemic. Tests were carried out using dry and humid gaseous samples containing about 100 representative chemicals found in exhaled breath and ambient air. Samples were collected in commercially available sorbent tubes, i.e. Tenax GR and a combination of Tenax TA, Carbograph 1TD and Carboxen 1003. Our results showed that all compounds were stable at room temperature up to 72 h and that sample humidity was the key factor affecting the stability of the compounds upon thermal treatment. Tenax GR-based sorbent tubes were less impacted by the thermal treatment, showing variations in the range 20%-30% for most target analytes. A significant loss of aldehydes and sulphur compounds was observed using carbon molecular sieve-based tubes. In this case, a dry purge step before inactivation at 60 °C significantly reduced the loss of the target analytes, whose variations were comparable to the method variability. Finally, a breath analysis workflow including a SARS-CoV-2 inactivation treatment is proposed.
Assuntos
Testes Respiratórios/instrumentação , COVID-19/virologia , SARS-CoV-2/fisiologia , Inativação de Vírus , Compostos Orgânicos Voláteis/química , Testes Respiratórios/métodos , Humanos , Pandemias , Manejo de Espécimes/métodos , Temperatura , Compostos Orgânicos Voláteis/análiseRESUMO
A main challenge in the development of biosensing devices for the identification and quantification of nucleic acids is to avoid the amplification of the genetic material from the sample by polymerase chain reaction (PCR), which is at present necessary to enhance sensitivity and selectivity of assays. PCR has undoubtedly revolutionized genetic analyses, but it requires careful purification procedures that are not easily implemented in point of care (POC) devices. In recent years, a new strategy for nucleic acid detection based on clustered regularly interspaced short palindromic repeats (CRISPR) and associated protein systems (Cas) seems to offer unprecedented possibilities. The coupling of the CRISPR/Cas system with recent isothermal amplification methods is fostering the development of innovative optical and electrochemical POC devices. In this review, the mechanisms of action of several new CRISRP/Cas systems are reported together with their use in biosensing of nucleic acids.