Occupational hand trauma - Mechanism of injury and transient risk factors in Jerusalem.

INTRODUCTION: Although prevalent, and variable geographically, there is little information on the incidence and risk factors for occupation hand trauma in our health care system. This pilot study was designed to determine the optimal data collection methods for transient risk factors locally METHODS: All adult patients with occupational hand trauma treated at an emergency department (ED) during a three-month period were interviewed, either in person or by phone, using a case crossover designed questionnaire, regarding occupation and exposure to potential transient risk factor. RESULTS: Of 206 patients treated with occupational trauma during the study period, 94 had trauma distal to the elbow (46%). Patient compliance was high - 89% of the patients consented to phone interviews and 83% completed in-person ED interviews. In the 75 patients which participated in the study, several risk factors were found to be significant, including machine maintenance and being distracted, including by a cellular phone. We found lack of job experience, limited training on the job site and reports of previous injuries in these workplaces to be prevelent. DISCUSSION: The risk factors implicated in this study are similar to those reported in previous studies at other locations and are modifiable although this is the first report linking cellular phone use and occupation trauma. This finding should be further examined in a larger group and according to occupational categories. Compliance with the study was high, in person or with phone interviews, making these options viable for further studies. Several minor changes to the questionnaire were suggested although it did conform with the case-crossover study design. According to this study, standard preventive measures may be lacking in Jerusalem and should be implemented more uniformly, including specific workplace safety plans and education and taking into consideration the risk factors documented here.

Insights and trends review: the role of three-dimensional technology in upper extremity surgery.

The use of three-dimensional (3-D) technology in upper extremity surgery has the potential to revolutionize the way that hand and upper limb procedures are planned and performed. 3-D technology can assist in the diagnosis and treatment of conditions, allowing virtual preoperative planning and surgical templating. 3-D printing can allow the production of patient-specific jigs, instruments and implants, allowing surgeons to plan and perform complex procedures with greater precision and accuracy. Previously, cost has been a barrier to the use of 3-D technology, which is now falling rapidly. This review article will discuss the current status of 3-D technology and printing, including its applications, ethics and challenges in hand and upper limb surgery. We have provided case examples to outline how clinicians can incorporate 3-D technology in their clinical practice for congenital deformities, management of acute fracture and malunion and arthroplasty.

Nationwide community based emergency centers reveal scale of hand trauma.

INTRODUCTION: This study describes the characteristics of hand trauma treated in community-based emergency centers (CBECs) in Israel. It was hypothesized that the rate of hand trauma, as well as patient and injury characteristics, would differ from a recent study of patients treated in hospital emergency departments (EDs) in Jerusalem. METHODS: Data on all hand injury patients treated at any of the CBECs belonging to a large nationwide chain in 2017 were retrieved from the electronic medical records of the treatment centers, including demographic and clinical characteristics. RESULTS: Over the course of 2017, 53,574 individuals were treated for forearm, wrist and hand injuries (35% of all trauma patients treated during this period). The majority of the patients were male (62%). Contusions and fractures were common (80%) with a minority of lacerations (10%). Crush injuries and amputations were rare. Dog bites accounted for 1.5% of the injuries under the age of 10. Females were treated more with painkillers and opioids, especially over the age of 65, with variability between centers. Although the rate of fractures was similar between teens and the elderly, the elderly were treated with immobilization less frequently, and were referred to EDs for further care. Hospital referral rates differed significantly between centers. DISCUSSION: A higher rate of hand trauma was found in the CBECs in comparison to the hospital ED report (35% vs. 20% of all trauma patients, respectively). Patients treated at the CBECs, in comparison to the ED, were less often male, less often young adults, and differed in terms of type of injury. In the CBECs there were more contusions, as well as fewer lacerations and open wound injuries. In contrast, dog bites in children were found to be much more prevalent than previously reported. Hospital referral indications, the use of immobilization and pain management were found to vary according to age, gender and treatment center. Due to the high rate of hand trauma in CBECs, specific protocols are needed for these patients. The use of opioids should be specifically addressed, considering recent changes in treatment protocols. Thus, the prevalence and characteristics of hand trauma may be biased in studies based on hospital records.

Scaphoid fracture displacement is not correlated with the fracture angle.

Classifications of scaphoid fractures associate the angle of the fracture with its stability. To examine this assumption, we measured acute scaphoid fracture angles and inclinations in relation to different scaphoid axes, using fracture displacement as an indicator of instability. We examined the effect of using different axes on the measurements of angles. CT scans of 133 scaphoid fractures were classified according to the location of the fractures. Using a three-dimensional computer model, we computed four scaphoid axes. For each fracture, we then measured the fracture angle and the direction of the fracture inclination in relation to each one of the axes. We found a correlation between displacement and the angles of proximal fractures using one of these axes (the surface principal component analysis axis). No such correlations were found for waist fractures, which were the majority of fractures. There were significant differences between the measurements made with different axes. The findings indicate that the angle of the fracture and the direction of the fracture inclination are minor factors in the displacement of most scaphoid fractures.Level of evidence: III.

Blinking Dermatitis: A Case Report.

CASE REPORT: Quincke sign manifested on the wrist of a young healthy man. The patient had self-treated with topical antibiotics and steroids for a second-degree burn, but then developed contact dermatitis followed by cellulitis. He presented to the emergency department with a "blinking" effect of the skin lesion. CONCLUSION: The "blinking" effect is the result of focal subcutaneous arterial dilatation in the zone of subcutaneous inflammation.

Impact of Design on Force between Flexor Tendons and Distal Radius Volar Plates.

Background Flexor tendon injury is a rare but serious complication of distal radius volar plating. Purpose This study aims to determine whether the design of distal radius volar plates impacts the amount of force exerted on the flexor digitorum profundus (FDP) and flexor pollicis longus (FPL) tendons when the plates are placed proximal and distal to the watershed line. Methods Three commercially available plates were applied to 10 fresh, matched-pair upper extremity specimens. Cyclical loading was applied to the tendons, and the force generated between tendon and plate was measured. Linear mixed effect models were used to evaluate differences in maximum and mean forces by plate position, plate design, and the interaction between position and design. Results Forces on the tendons differed significantly by position but not plate design. For the FPL tendon, the average maximum force with a plate in Soong's grade 2 was 4.50 (95% confidence interval [CI]: 2.8-7.3) times higher than when the plate was in a Soong's grade 0 placement, and 4.63 (95% CI: 2.82-7.61) times higher for the FDP tendon. While not statistically significant, lower observed force values with thinner plates when plates were placed distal to the watershed line suggest that that plate thickness could also be a critical plate characteristic for distally placed plates. Conclusion Despite differences in plate design, the main determinant of plate prominence and therefore flexor tendon injury potential is placement in relation to the watershed line. Clinical Relevance This study may help to guide surgeon implant selection and volar plate design.

The epidemiology of wrist and hand injury in two hospitals in Jerusalem: substantial differences between population subgroups.

BACKGROUND: Wrist and hand injuries are common and constitute a major economic burden. General injury prevention programs have failed to demonstrate a decrease in injury rates. We hypothesized that there are differences in injury patterns in culturally diverse subpopulations of a metropolitan area treated within the same medical system, which may partly explain the difficulties associated with injury prevention. METHODS: We conducted a survey of patients admitted to emergency departments of two hospitals in Jerusalem for wrist and hand injuries during a 3 month period. Patients were asked to complete a questionnaire regarding demographic data, injury type and mechanism. Injury type and mechanism were then compared for age, gender, level of education and degree of religiosity. RESULTS: The questionnaire was completed by 799 patients (response rate 62%; 75% male; average age 27). Thirty-one percent reported they were injured at work, 33% at home and 36% during leisure activities. Data analysis showed that several subpopulations were found to be at risk as compared to their corresponding groups and relative proportion in the overall population of the city. These included contusions after falls in non-ultra-Orthodox Jewish women aged 65 years and over, crush injuries in ultra-Orthodox Jews under the age of 10 (53% vs. 14% for non ultra-Orthodox Jews, respectively) and Muslim teens. Muslims were injured more, especially at work, in comparison to their relative proportion in the population as a whole. CONCLUSION: Different subpopulations at risk and different injury patterns of wrist and hand injuries were found in this culturally heterogeneous population. Awareness of these differences may be the first step when designing specific injury prevention programs in a culturally diverse population. A combined effort of community leaders and government agencies is needed to deal with the specific populations at risk, although legislation may be needed to limit some of the risks such as teens and specific work related hazards and exposures.

First clinical experience with a new injectable recombinant human collagen scaffold combined with autologous platelet-rich plasma for the treatment of lateral epicondylar tendinopathy (tennis elbow).

BACKGROUND: Lateral epicondylitis is a tendinopathy of the common extensor origin at the elbow. When traditional conservative treatment fails, more effective therapies are needed. Vergenix Soft Tissue Repair (STR) Matrix (CollPlant Ltd., Ness-Ziona, Israel) is an injectable gel composed of cross-linked bioengineered recombinant human type I collagen combined with autologous platelet-rich plasma (STR/PRP). The complex forms a collagen-fibrin matrix that promotes cell migration and tissue repair. Based on positive outcomes from preclinical trials, this study is the first clinical trial of STR/PRP on tendinopathy. We hypothesized that STR/PRP would be a safe and effective treatment for lateral epicondylar tendinopathy. METHODS: Patients with chronic lateral epicondylitis underwent treatment with STR/PRP. Outcome assessment included grip strength, functional disability, and changes in sonographic tendon appearance for up to 6 months after treatment. RESULTS: The study enrolled 40 patients. No systemic or local severe adverse events were reported. Clinical evaluation revealed an improvement in the mean Patient-Rated Tennis Elbow Evaluation score from 64.8 before treatment and showed a 59% reduction at 6 months. The 12-Item Short-Form Health Survey questionnaire showed improvement from a mean score of 30.7 to 37.7 at the final follow-up. Grip strength increased from 28.8 kg at baseline to 36.8 kg at 6 months. Improvements in sonographic tendon appearance were evident among 68% of patients. CONCLUSION: STR/PRP is a safe treatment that effectively induces clinically significant improvements in elbow symptoms and general well-being as well as objective measures of strength and imaging of the common extensor tendon within 6 months of treatment of elbow tendinopathy recalcitrant to standard treatments.

The Effect of Radioscapholunate Fusion With and Without Distal Scaphoid and Triquetrum Excision on Capitolunate Contact Pressures.

PURPOSE: To determine the effects of motion-increasing modifications to radioscapholunate (RSL) arthrodesis on capitolunate contact pressure in cadaveric wrist specimens. METHODS: Ten fresh-frozen cadaveric wrists were dissected of all superficial soft tissue, potted in polymethyl-methacrylate, and the carpus exposed via a ligament-sparing capsulotomy. An RSL arthrodesis was simulated using 2 2.4-mm distal radius plates with locking screws. The distal scaphoid pole and triquetrum were removed with an osteotome and rongeur, respectively. Contact area, pressure, and force were measured in the capitolunate joint during the application of a 35-N uniaxial load using pressure-sensitive film. Measurements were obtained before and after simulated RSL fusion, following distal scaphoidectomy and after triquetrectomy. RESULTS: The combination of RSL fusion with distal scaphoid excision (DSE) increased contact forces in the capitolunate joint by 50% over controls. An RSL fusion, and RSL fusion with DSE and triquetrum excision (TE), exhibited intermediate levels of contact force between controls and RSL fusion with DSE. Capitolunate contact pressures were similar between all experimental groups. Contact area in the capitolunate joint increased by 43% after RSL fusion with DSE over intact specimen controls. Lastly, contact area in wrists with RSL fusion, and RSL fusion with DSE and TE, were elevated, but not significantly different from intact controls. CONCLUSIONS: A DSE performed at the time of RSL fusion results in increased midcarpal joint contact force and area, with resultant contact pressures unchanged. Triquetrectomy, which has been previously shown to improve range of motion, did not increase contact forces in the capitolunate joint. CLINICAL RELEVANCE: If a surgeon is contemplating performing an RSL arthrodesis with DSE, we recommend adding a triquetrectomy to improve motion because this does not add to the potentially deleterious effects of increased midcarpal contact force.

Three-dimensional comparison of alternative screw positions versus actual fixation of scaphoid fractures.

PURPOSE: The recommended technique for the fixation of a scaphoid waist fracture involves a headless compression screw placed in the proximal fragment center. This is usually accomplished by placing a longitudinal axis screw as visualized by fluoroscopy. The screw length has been shown to have a biomechanical advantage. An alternative to these options, which has been debated in the literature, is a screw placed perpendicular to the fracture plane and in its center. The perpendicular screw may have a biomechanical advantage despite the fact that it may be shorter. This study examined the differences in location and length in actual patients between a screw in the center of the proximal fragment with a longitudinal axis screw, and the actual fixating screw. These were then compared to a perpendicular axis screw. METHODS: Pre- and post-operative CT scans of 10 patients with scaphoid waist fractures were evaluated using a 3D computer model. Comparisons were made between the length, location and angle of actual and virtual screw alternatives; namely, a screw along the central third of the proximal fragment (central screw axis) where the scaphoid longitudinal axis was calculated mathematically (longitudinal screw axis) and a screw placed at 90° to the fracture plane and in its center (perpendicular screw axis). RESULTS: The longitudinal axis screw was found to be significantly longer than the other axes (28.3mm). There was a significant difference between the perpendicular axis screw and the location and angle of the other screw axis, but it was only shorter than the longitudinal screw (23.6mm versus 25.5mm for the actual screw; ns.). CONCLUSIONS: A computed longitudinal axis screw is longer than a central or actual screw placed longitudinally by visual inspection by the surgeon. Although it needs to be placed using computer assisted (CAS) techniques, it may have the biomechanical advantages of a longer screw in a similar trajectory. The perpendicular screw was found to be significantly different in position and angle but not shorter than the actually placed screw. It has biomechanical advantages and does not require visualization with CAS methods, making it the more attractive alternative.