Persistent Luminescence Nanosensors: A Generalized Optode-Based Platform for Autofluorescence-Free Sensing in Biological Systems.

Fluorescent nanosensors have revolutionized diagnostics and our ability to monitor cellular dynamics. Yet, distinguishing sensor signals from autofluorescence remains a challenge. Here, we merged optode-based sensing with near-infrared-emitting ZnGa2O4:Cr3+ persistent luminescence nanoparticles (PLNPs) to create nanocomposites for autofluorescence-free "glow-in-the-dark" sensing. Hydrophobic modification and incorporation of the persistent luminescence nanoparticles into an optode-based nanoparticle core yielded persistent luminescence nanosensors (PLNs) for five analytes (K+, Na+, Ca2+, pH, and O2) via two distinct mechanisms. We demonstrated the viability of the PLNs by quantifying K+ in fetal bovine serum, calibrating the pH PLNs in the same, and ratiometrically monitoring O2 metabolism in cultures of Saccharomyces cerevisiae, all the while overcoming their respective autofluorescence signatures. This highly modular platform allows for facile tuning of the sensing functionality, optical properties, and surface chemistry and promises high signal-to-noise ratios in complex optical environments.

Kinetic Model for Predicting Perfluoroalkyl Acid Degradation During UV-Sulfite Treatment.

Hydrated electron (eaq-) treatment processes show great potential in remediating recalcitrant water contaminants, including perfluoroalkyl and polyfluoroalkyl substances (PFAS). However, treatment efficacy depends upon many factors relating to source water composition, UV light source characteristics, and contaminant reactivity. Here, we provide critical insights into the complex roles of solution parameters on contaminant abatement through application of a UV-sulfite kinetic model that incorporates first-principles information on eaq- photogeneration and reactivity. The model accurately predicts decay profiles of short-chain perfluoroalkyl acids (PFAAs) during UV-sulfite treatment and facilitates quantitative interpretation of the effects of changing solution composition on PFAS degradation rates. Model results also confirm that the enhanced degradation of PFAAs observed under highly alkaline pH conditions results from changes in speciation of nontarget eaq- scavengers. Reverse application of the model to UV-sulfite data collected for longer chain PFAAs enabled estimation of bimolecular rate constants (k2, M-1 s-1), providing an alternative to laser flash photolysis (LFP) measurements that are not feasible due to the water solubility limitations of these compounds. The proposed model links the disparate means of investigating eaq- processes, namely, UV photolysis and LFP, and provides a framework to estimate UV-sulfite treatment efficacy of PFAS in diverse water sources.

Chemical bonding in potential PFAS products from the thermal degradation of energetic devices, a DFT analysis.

This work investigates stability and chemical bonding in possible per- and polyfluoroalkyl substances (PFAS) generated through the disposal of munitions in controlled detonations and open burns. Density functional theory (DFT) calculations were used to determine bond dissociation enthalpies (BDEs), activation energies, and other chemical properties. Calculated parameters were used to determine the functional groups most likely to be present based on the level of fluorination and the position of fluorines. In compounds that form C-O bonds, the presence of α-fluorines significantly strengthens the C-O bond by ∼4-18 kcal/mol. The results of this study indicate that fluoroalkyl alcohols are a very likely product of the disposal of munitions. This work was designed to expedite the analytical process of confirming that PFAS are created from current disposal methods of energetic devices by providing insight as to of what types of compounds should be expected. The PFAS generated in such reactions are expected to contain some functional groups (i.e., nitro and nitrite) that have not been known to exist as a result of the environmental degradation of industrially relevant PFAS, therefore, they may have been overlooked before. These initial results imply that PFAS with nitro functionalities may be formed in these conditions considering the abundance of NO2 radicals expected to be present as well as the strength of the C-N bond that can form (∼40-50 kcal/mol) whereas with nitroso functionalities are not expected to be found since the bonds formed are much weaker (∼25-35 kcal/mol), and nitrosoalkanes are known to decompose under mild conditions. Although these results are promising, analytical work is needed to assess the conclusions of this study in real systems.

Influence of Carbonate Speciation on Hydrated Electron Treatment Processes.

Advanced reduction processes (ARPs) that generate hydrated electrons (eaq-; e.g., UV-sulfite) have emerged as a promising remediation technology for recalcitrant water contaminants, including per- and polyfluoroalkyl substances (PFASs). The effectiveness of ARPs in different natural water matrices is determined, in large part, by the presence of non-target water constituents that act to quench eaq- or shield incoming UV photons from the applied photosensitizer. This study examined the pH-dependent quenching of eaq- by ubiquitous dissolved carbonate species (H2CO3*, HCO3-, and CO32-) and quantified the relative importance of carbonate species to other abundant quenching agents (e.g., H2O, H+, HSO3-, and O2(aq)) during ARP applications. Analysis of laser flash photolysis kinetic data in relation to pH-dependent carbonate acid-base speciation yields species-specific bimolecular rate constants for eaq- quenching by H2CO3*, HCO3-, and CO32- (kH2CO3* = 2.23 ± 0.42 × 109 M-1 s-1, kHCO3- = 2.18 ± 0.73 × 106 M-1 s-1, and kCO32- = 1.05 ± 0.61 × 105 M-1 s-1), with quenching dominated by H2CO3* (which includes both CO2(aq) and H2CO3) at moderately alkaline pH conditions despite it being the minor species. Attempts to apply previously reported rate constants for eaq- quenching by CO2(aq), measured in acidic solutions equilibrated with CO2(g), overpredict quenching observed in this study at higher pH conditions typical of ARP applications. Moreover, kinetic simulations reveal that pH-dependent trends reported for UV-sulfite ARPs that have often been attributed to eaq- quenching by varying [H+] can instead be ascribed to variable acid-base speciation of dissolved carbonate and the sulfite sensitizer.

Ultra-short chain fluorocarboxylates exhibit wide ranging reactivity with hydrated electrons.

Recent reports demonstrate that technologies generating hydrated electrons (eaq-; e.g., UV-sulfite) are a promising strategy for destruction of per- and polyfluoroalkyl substances, but fundamental rate constants are lacking. This work examines the kinetics and mechanisms of eaq- reactions with ultra-short chain (C2-C4) fluorocarboxylates using experimental and theoretical approaches. Laser flash photolysis (LFP) was used to measure bimolecular rate constants (k2; M-1 s-1) for eaq- reactions with thirteen per-, and for the first time, polyfluorinated carboxylate structures. The measured k2 values varied widely from 5.26 × 106 to 1.30 × 108 M-1s-1, a large range considering the minor structural changes among the target compounds. Molecular descriptors calculated using density functional theory did not reveal correlation between k2 values and individual descriptors when considering the whole dataset, however, semiquantitative correlation manifests when grouping by similar possible initial reduction event such as electron attachment at the α-carbon versus ß- or γ-carbons along the backbone. From this, it is postulated that fluorocarboxylate reduction by eaq- occurs via divergent mechanisms with the possibility of non-degradative pathways being prominent. These mechanistic insights provide rationale for contradictory trends between LFP-derived k2 values and apparent degradation rates recently reported in UV-sulfite constant irradiation treatment experiments.

Phototriggered Desorption of Hydrogen, Ethylene, and Carbon Monoxide from a Cu(I)-Modified Covalent Organic Framework.

Materials that are capable of adsorbing and desorbing gases near ambient conditions are highly sought after for many applications in gas storage and separations. While the physisorption of typical gases to high surface area covalent organic frameworks (COFs) occurs through relatively weak intermolecular forces, the tunability of framework materials makes them promising candidates for tailoring gas sorption enthalpies. The incorporation of open Cu(I) sites into framework materials is a proven strategy to increase gas uptake closer to ambient conditions for gases that are capable of π-back-bonding with Cu. Here, we report the synthesis of a Cu(I)-loaded COF with subnanometer pores and a three-dimensional network morphology, namely Cu(I)-COF-301. This study focused on the sorption mechanisms of hydrogen, ethylene, and carbon monoxide with this material under ultrahigh vacuum using temperature-programmed desorption and Kissinger analyses of variable ramp rate measurements. All three gases desorb near or above room temperature under these conditions, with activation energies of desorption (E des) calculated as approximately 29, 57, and 68 kJ/mol, for hydrogen, ethylene, and carbon monoxide, respectively. Despite these strong Cu(I)-gas interactions, this work demonstrated the ability to desorb each gas on-demand below its normal desorption temperature upon irradiation with ultraviolet (UV) light. While thermal imaging experiments indicate that bulk photothermal heating of the COF accounts for some of the photodriven desorption, density functional theory calculations reveal that binding enthalpies are systematically lowered in the COF-hydrogen matrix excited state initiated by UV irradiation, further contributing to gas desorption. This work represents a step toward the development of more practical ambient temperature storage and efficient regeneration of sorbents for applications with hydrogen and π-accepting gases through the use of external photostimuli.

High-temperature decomposition chemistry of trimethylsiloxane surfactants, a potential Fluorine-Free replacement for fire suppression.

Per- and polyfluoroalkyl substances (PFAS) have become global environmental contaminants due to being notoriously difficult to degrade, and it has become increasingly important to employ suitable PFAS alternatives, especially in aqueous film-forming foams (AFFF). Trimethylsiloxane (TriSil) surfactants are potential fluorine-free replacements for PFAS in fire suppression technologies. Yet because these compounds may be more susceptible to high-temperature decomposition, it is necessary to assess the potential environmental impact of their thermal degradation products. Our study analyzes the high-temperature degradation of a truncated trimethylsiloxane (TriSil-1n) surfactant based on quantum mechanical methods. The degradation chemistry of TriSil-1n was studied through radical formation and propagation initiated from two prominent pathways (unimolecular and bimolecular reactions) at both 298 K and 1200 K, a relevant temperature in flames and thermal incinerators. Regardless of the pathway taken and temperature, all radical intermediates stemmed from the polyethylene glycol chain and primarily formed stable polydimethylsiloxanes (PDMS) and small organics such as ethylene, formaldehyde, and acetaldehyde, among other products. The major degradation products of TriSil-1n resulting from high-temperature thermal degradation as predicted by this study would be relatively less harmful to the environment compared to PFAS incineration/combustion products from previous research, supporting the replacement of PFAS with TriSil surfactants.

Conformational distributions of helical perfluoroalkyl substances and impacts on stability.

Per- and polyfluoroalkyl substances (PFAS) have been widely used the past 70 years in numerous applications due to their chemical and thermal stability. Due to their robust stability, they are environmentally recalcitrant which made them one of the most persistent environmental contaminants. In addition to strong CF bond strength, oleophobicity, hydrophobicity, and high reduction-oxidation (redox) potential of PFAS has led to their inefficient degradation by traditional means. A characteristic of their structure is also their preference to adopt helical conformations along the carbon backbone, contrary to their hydrocarbon analogues. This work investigates the helical nature of perfluoroalkanes through their conformational distributions, especially as a benchmark for determining the impact of polar head groups, heteroatoms, and radical center on helical conformations. Since structure governs reactivity and molecular properties, it is important to assess if minor chemical perturbations in the structure will lead to changes in the conformations. Based on density functional theory calculations and comprehensive conformational distributions, it was concluded that the helicity is a local structural property which changes significantly with the presence of heteroatoms in the perfluoroalkyl chain as well as with the presence of radical centers.

Computational protocol for predicting 19 F NMR chemical shifts for PFAS and connection to PFAS structure.

Per- and polyfluoroalkyl substances (PFAS) are robust "forever" chemicals that have become global environmental contaminants due to their inability to degrade using traditional techniques. In addition to the persistent nature of PFAS, the structural and functional diversity in PFAS creates a unique challenge in identification and remediation. Their identification is further complicated by the absence of standards for many PFAS. This work is aimed at developing a protocol for computing and establishing accurate 19 F NMR chemical shifts for PFAS using density functional theory (DFT), which can aid in the identification of PFAS. The impact of solvation and basis sets was evaluated by comparing the computed data with the experimental measurements. Results showed the addition of dispersion corrections in the methodology improve the accuracy of calculated NMR parameters within 4 ppm of the experimental values. Adding a second diffuse function and additional polarization did not improve the accuracy, likely because of the electronegativity of fluorine which does not allow the electron density of fluorine atoms to be polarized. The inclusion of various implicit solvation (DMSO, chloroform, and water) yielded negligible differences in accuracy, and were overall less accurate than the gas phase calculations. The most accurate methodology was then applied to more environmentally relevant PFAS, and the impact of helical nature on the NMR signatures was evaluated. The implication of this work is to be able to improve the identification of structurally diverse PFAS using the 19 F NMR.

Role of Explicit Hydration in Predicting the Aqueous Standard Reduction Potential of Sulfate Radical Anion by DFT and Insight into the Influence of pH on the Reduction Potential.

Sulfate radical anion (SO4•-) is a potent oxidant capable of destroying recalcitrant environmental contaminants such as perfluoroalkyl carboxylic acids. In addition, it is thought to participate in important atmospheric reactions. Its standard reduction potential (E°) is fundamental to its reactivity. Using theoretical methods to accurately predict the aqueous phase E° requires solvation with explicit water molecules. Herein, using density functional theory, we calculated the aqueous E° of SO4•- and evaluated sensitivity to explicit water count. The E° increased considerably with more waters until ca. 24 were included, after which change in E° was small. When a proton was added to these systems, the E° was similar regardless of the explicit water count and this value was similar to the E° for systems with a large number of explicit waters but no proton. This result agrees with literature evidence that the E° is pH independent. Natural Bond Orbital natural population analysis indicated that in the case of both SO42- and SO4•-, considerable charge was donated from the SO4 center to the explicit solvation shells.

Diazaborines oxidize slowly with H2O2 but rapidly with peroxynitrite in aqueous buffer.

Reactive oxygen species (ROS) such as hydrogen peroxide (H2O2) and peroxynitrite (ONOO-) oxidize arylboronic acids to their corresponding phenols. When used in molecular imaging probes and in ROS-responsive molecules, however, simple arylboronic acids struggle to discriminate between H2O2 and ONOO- because of their fast rate of reaction with both ROS. Here, we show that diazaborines (DABs) react slowly with H2O2 but rapidly with peroxynitrite in an aqueous buffer. In addition to their slow reaction with H2O2, the immediate product of DAB oxidation with H2O2 and ONOO- can yield a kinetically trapped CN Z-isomer that slowly equilibrates with its E-isomer. Taken together, our work shows that diazaborines exhibit enhanced kinetic discrimination between H2O2 and ONOO- compared to arylboronic acids, opening up new opportunities for diazaborine-based tools in chemical biology.

Periodic Trends behind the Stability of Metal Catalysts Supported on Graphene with Graphitic Nitrogen Defects.

This study explored the fundamental chemical intricacies behind the interactions between metal catalysts and carbon supports with graphitic nitrogen defects. These interactions were probed by examining metal adsorption, specifically, the location of adsorption and the electronic structure of metal catalysts as the basis for the metal-support interactions (MSIs). A computational framework was developed, and a series of 12 transition metals was systematically studied over various graphene models with graphitic nitrogen defect(s). Different modeling approaches served to provide insights into previous MSI computational discrepancies, reviewing both truncated and periodic graphene models. The computational treatment affected the magnitudes of adsorption energies between the metals and support; however, metals generally followed the same trends in their MSI. It was found that the addition of the nitrogen dopant improved the MSI by promoting electronic rearrangement from the metals' d- to s-orbitals for greater orbital overlap with the carbon support, shown with increased favorable adsorption. Furthermore, the study observed periodic trends that were adept descriptors of the MSI fundamental chemistries.

Understanding Fragmentation of Organic Small Molecules in Atom Probe Tomography.

In atom probe tomography of molecular organic materials, field ionization of either entire molecules or molecular fragments can occur, but the mechanism governing this behavior was not previously understood. This work explains when a doubly ionized small molecule organic material is expected to undergo fragmentation. We find that multiple detection events arising from post-ionization fragmentation of a parent molecular dication into two daughter ions is well explained by the free energy and geometries of the molecules computed using density functional theory. Of the systems studied, exergonic free energies for formation of the daughter ions, smaller activation energies for dissociation, and increases in bond length are all found to be quantitative predictors for ion fragmentation. This work expands the applicability of atom probe tomography to organic materials by increasing the fundamental understanding of processes occurring during this analysis technique.

Structure and Reactivity of Alloxan Monohydrate in the Liquid Phase.

Alloxan is an important toxic glucose analogue used to induce diabetes in lab test animals. Once regarded as a "problem structure," the condensed-phase structure of anhydrous alloxan has largely been settled, but literature inconsistencies remain for the structure of the typically employed reagent alloxan monohydrate. Due to the criticality of structure-function relationships, we have used 1H/13C{1H} NMR, IR spectroscopy, as well as quantum mechanical (QM) calculations to probe the liquid-phase structure and reactivity of alloxan monohydrate. In protic solvents (D2O and acetic acid-d4), hydration at the C5 carbonyl of alloxan monohydrate occurs quantitatively to form the C5 gem-diol (5,5'-dihydroxybarbituric acid). In the aprotic solvent dimethyl sulfoxide (DMSO)-d6, there exists a mixture of the C5 gem-diol and planar tetraketo form of alloxan monohydrate. QM calculations explain the solvent-dependent hydration reactivity, where a solvent-assisted H-atom transfer mechanism lowers the activation energy of water addition at the C5 carbonyl by ∼16 or 27 kcal/mol in water or acetic acid, respectively, compared to the unassisted hydration reaction. Prompt recrystallization of alloxan monohydrate from boiling water does not alter the structure of the reagent. These findings probe the exact structure of alloxan monohydrate to guide future research efforts in biological sciences and in organic synthesis.

Role of pH in the Transformation of Perfluoroalkyl Carboxylic Acids by Activated Persulfate: Implications from the Determination of Absolute Electron-Transfer Rates and Chemical Computations.

Perfluoroalkyl carboxylic acids (PFCAs) are ubiquitous contaminants known for their bioaccumulation, toxicological harm, and resistance to degradation. Remediating PFCAs in water is an ongoing challenge with existing technologies being insufficient or requiring additional disposal. An emergent approach is using activated persulfate, which degrades PFCAs through sequential scission of CF2 equivalents yielding shorter-chain homologues, CO2 and F-. This transformation is thought to be initiated by single electron transfer (SET) from the PFCA to the activate oxidant, SO4•-. A pronounced pH effect has been observed for thermally activated persulfate PFCA transformation. To evaluate the role of pH during SET, we directly determined absolute rate constants for perfluorobutanoic acid and trifluoroacetic acid oxidation by SO4•- in the pH range of 0.5-4.0 using laser flash photolysis. The average of the rate constants for both substrates across all pH values was 9 ± 2 × 103 M-1 s-1 (±2σ), implying that acid catalysis of thermal persulfate activation may be the primary culprit of the observed pH effect, instead of pH influencing the SET step. In addition, density functional theory was used to investigate if SO4•-protonation might enhance PFCA transformation kinetics. We found that when calculations include explicit water molecules, direct SO4•- protonation does not occur.

Intermolecular fluoroamination of allenes towards substituted vinyl fluorides.

A synthetic method towards fluorinated allylamines using allene precursors is reported. A variety of heterocyclic amines were employed as nucleophiles in a Selectfluor promoted intermolecular fluoroamination reaction. This strategy provides a novel synthetic route to access vinyl fluorides with a vicinal amine moiety.

Reactive Molecular Dynamics Simulations and Quantum Chemistry Calculations To Investigate Soot-Relevant Reaction Pathways for Hexylamine Isomers.

Sooting tendencies of a series of nitrogen-containing hydrocarbons (NHCs) have been recently characterized experimentally using the yield sooting index (YSI) methodology. This work aims to identify soot-relevant reaction pathways for three selected C6H15N amines, namely, dipropylamine (DPA), diisopropylamine (DIPA), and 3,3-dimethylbutylamine (DMBA) using ReaxFF molecular dynamics (MD) simulations and quantum mechanical (QM) calculations and to interpret the experimentally observed trends. ReaxFF MD simulations are performed to determine the important intermediate species and radicals involved in the fuel decomposition and soot formation processes. QM calculations are employed to extensively search for chemical reactions involving these species and radicals based on the ReaxFF MD results and also to quantitatively characterize the potential energy surfaces. Specifically, ReaxFF simulations are carried out in the NVT ensemble at 1400, 1600, and 1800 K, where soot has been identified to form in the YSI experiment. These simulations account for the interactions among test fuel molecules and pre-existing radicals and intermediate species generated from rich methane combustion, using a recently proposed simulation framework. ReaxFF simulations predict that the reactivity of the amines decrease in the order DIPA > DPA > DMBA, independent of temperature. Both QM calculations and ReaxFF simulations predict that C2H4, C3H6, and C4H8 are the main nonaromatic soot precursors formed during the decomposition of DPA, DIPA, and DMBA, respectively, and the associated reaction pathways are identified for each amine. Both theoretical methods predict that sooting tendency increases in the order DPA, DIPA, and DMBA, consistent with the experimentally measured trend in YSI. This work demonstrates that sooting tendencies and soot-relevant reaction pathways of fuels with unknown chemical kinetics can be identified efficiently through combined ReaxFF and QM simulations. Overall, predictions from ReaxFF simulations and QM calculations are consistent, in terms of fuel reactivity, major intermediates, and major nonaromatic soot precursors.

Investigating the Photochemistry of C7 and C8 Functionalized N(5)-Ethyl-flavinium Cation: A Computational Study.

Flavins are a diverse set of compounds with a wide variety of biological and nonbiological applications. Applications of flavins receiving attention recently consist of electro- and photocatalytic oxidation of substrates for organic synthesis, bioengineered nanotechnology, and water splitting catalysts, among others. While there is vast knowledge regarding the structure-property relationships of flavins and their electrochemistry, there is much less work elucidating the structure property relationships as they pertain to flavinium photochemistry. Herein, we report the effect of molecular tailoring on the molecular properties of N(5)-ethyl-flavinium cation (Et-Fl+), a derivative of the biocatalytic coenzyme riboflavin, by incorporating electron withdrawing and donating groups at the C7 and C8 position of the isoalloxazine ring. The presence of electron withdrawing groups at the C8 position caused a red shift in the absorption spectrum, while the electron donating groups caused a blue shift. Functionalization at the C7 position had the opposite effect on the absorption spectrum. The effects of single substitution were relatively negated with simultaneous functionalization at both the C8 and C7 positions. Difference density plots indicate no change in the nature of the S1 excited state, which was confirmed by optimization of the excited state geometries. The results presented in this study indicate that functionalization of the isoalloxazine unit affects the photophysical properties of N(5)-ethyl-flavinium cations.

Characterization of the ALSEP Process at Equilibrium: Speciation and Stoichiometry of the Extracted Complex.

We have determined the identity of the complexes extracted into the ALSEP process solvent from solutions of nitric acid. The ALSEP process is a new solvent extraction separation designed to separate americium and curium from trivalent lanthanides in irradiated nuclear fuel. ALSEP employs a mixture of two extractants, 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) and N,N,N',N'-tetra(2-ethylhexyl)diglycolamide (TEHDGA) in n-dodecane, which makes it difficult to ascertain the nature of the extracted metal complexes. It is often asserted that the weak acid extractant HEH[EHP] does not participate in the extracted complex under ALSEP extraction conditions (2-4 M HNO3). However, the analysis of the Am extraction equilibria, Nd absorption spectra, and Eu fluorescence emission spectra of metal-loaded organic phases argues for the participation of HEH[EHP] in the extracted complex despite the high acidity of the aqueous phases. The extracted complex was determined to contain fully protonated molecules of HEH[EHP] with an overall stoichiometry of M(TEHDGA)2(HEH[EHP])2·3NO3. Computations also demonstrate that replacing one TEHDGA molecule with one (HEH[EHP])2 dimer is likely energetically favorable compared to Eu(TEHDGA)3·3NO3, whether the HEH[EHP] dimer is monodentate or bidentate.

Dynamic and Solvation Behaviors of ALSEP Organic Ligands.

The Actinide-Lanthanide Separation Process (ALSEP) is a solvent extraction approach for separating relevant trivalent minor actinides (e.g., americium and curium) from used nuclear fuel. However, relatively slow kinetics in the stripping step of the process restricts process throughput when scaled for industrial implementation. To assist in identifying specific kinetic barriers associated with the separation, the solvation and dynamic behaviors of the two organic extractants in the current ALSEP implementation, N,N,N',N'-tetra(2-ethylhexyl)diglycolamide (T2EHDGA) and 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEHEHP), were probed through molecular dynamics (MD) simulations. The simulations examined the effects of extractant and nitric acid concentration on the interfacial behavior of the extractants in three solvent systems (n-dodecane, water, and n-dodecane + water). Solvation analyses of T2EHDGA revealed expected amphiphilic behavior in pure solvent systems. In a nitric-acid-free biphasic solvent, it was found that T2EHDGA expressed similar interfacial conformations as HEHEHP, suggesting that a parallel-like configuration, relative to the interface, is adopted at low concentrations. When HNO3 was introduced to biphasic systems containing a single molecule of extractant, HEHEHP was observed to retain a relatively parallel orientation while the T2EHDGA orientation was no longer affected by the presence of the interface. At bulk extractant concentrations, representative of the ALSEP process, the presence of nitric acid had minimal impact on the ligand orientation. Calculated diffusion constants showed that only some systems involving T2EHDGA were affected by the presence of acid.