Relationship between dual-energy X-ray absorptiometry volumetric assessment and X-ray computed tomography-derived single-slice measurement of visceral fat.

To reduce radiation exposure and cost, visceral adipose tissue (VAT) measurement on X-ray computed tomography (CT) has been limited to a single slice. Recently, the US Food and Drug Administration has approved a dual-energy X-ray absorptiometry (DXA) application validated against CT to measure VAT volume. The purpose of this study was to develop an algorithm to compute single-slice area values on DXA at 2 common landmarks, L2/3 and L4/5, from an automated volumetrically derived measurement of VAT. Volumetric CT and total body DXA were measured in 55 males (age: 21-77 yr; body mass index [BMI]: 21.1-37.9) and 60 females (age: 21-85 yr; BMI: 20.0-39.7). Equations were developed by applying the relationship of CT single-slice area and volume measurements of VAT to the DXA VAT volume measure as well as validating these against the CT single-slice measurements. Correlation coefficients between DXA estimate of single-slice area and CT were 0.94 for L2/3 and 0.96 for L4/5. The mean difference between DXA estimate of single-slice area and CT was 5 cm(2) at L2/3 and 3.8 cm(2) at L4/5. Bland-Altman analysis showed a fairly constant difference across the single-slice range in this study, and the 95% limits of agreement for the 2 methods were -44.6 to +54.6 cm(2) for L2/3 and -47.3 to +54.9 cm(2) for L4/5. In conclusion, a volumetric measurement of VAT by DXA can be used to estimate single-slice measurements at the L2/3 and the L4/5 landmarks.

Abdominal visceral fat measurement using dual-energy X-ray: association with cardiometabolic risk factors.

OBJECTIVE: To examine the association between cardiometabolic risk factors and visceral adipose tissue (VAT) measurements using a dual-energy X-ray absorptiometry (DXA) based approach. DESIGN AND METHODS: An analysis of cross-sectional relationships between DXA VAT measured using CoreScan (GE Healthcare) and cardiometabolic indicators was conducted on a sample of 939 subjects (541 females and 398 males; average age, 56 years; average BMI, 26 kg/m2) who had previously undergone a total body DXA scan as well as measurements of key cardiometabolic risk factors. RESULTS: Sex-specific, age-adjusted multivariable regression analysis showed that for both men and women, DXA VAT was significantly associated with increased odds of hypertension, impaired fasting glucose, metabolic syndrome, and type 2 diabetes (P < 0.001). After additional model adjustment for BMI and waist circumference, the odds ratio (per SD change in VAT) for type 2 diabetes was 2.07 for women and 2.25 for men. Similarly, the odds ratio for metabolic syndrome for women was 3.46 and for men was 1.75. CONCLUSIONS: VAT measured using DXA showed a significant association with cardiometabolic risk factors and disease. These relationships persist after statistical adjustment for age, BMI, and waist circumference. DXA VAT may provide a new accessible option for quantifying VAT-related cardiometabolic risk.

Precision of a new tool to measure visceral adipose tissue (VAT) using dual-energy X-Ray absorptiometry (DXA).

OBJECTIVE: A new tool to quantify visceral adipose tissue (VAT) over the android region of a total body dual-energy x-ray absorptiometry (DXA) scan has recently been reported. The measurement, CoreScan, is currently available on Lunar iDXA densitometers. The purpose of the study was to determine the precision of the CoreScan VAT measurement, which is critical for understanding the utility of this measure in longitudinal trials. DESIGN AND METHODS: VAT precision was characterized in both an anthropomorphic imaging phantom (measured on 10 Lunar iDXA systems) and a clinical population consisting of obese women (n = 32). RESULTS: The intrascanner precision for the VAT phantom across 9 quantities of VAT mass (0-1,800 g) ranged from 28.4 to 38.0 g. The interscanner precision ranged from 24.7 to 38.4 g. There was no statistical dependence on the quantity of VAT for either the inter- or intrascanner precision result (p = 0.670). Combining inter- and intrascanner precision yielded a total phantom precision estimate of 47.6 g for VAT mass, which corresponds to a 4.8% coefficient of variance (CV) for a 1 kg VAT mass. Our clinical population, who completed replicate total body scans with repositioning between scans, showed a precision of 56.8 g on an average VAT mass of 1110.4 g. This corresponds to a 5.1% CV. Hence, the in vivo precision result was similar to the phantom precision result. CONCLUSIONS: The study suggests that CoreScan has a relatively low precision error in both phantoms and obese women and therefore may be a useful addition to clinical trials where interventions are targeted towards changes in visceral adiposity.

Quantification of visceral adipose tissue using lunar dual-energy X-ray absorptiometry in Asian Chinese.

OBJECTIVE: To evaluate the new DXA VAT method on an Asian Chinese population by comparing to a reference method, computed tomography (CT). DESIGN AND METHODS: In total, 145 adult men and women volunteers, representing a wide range of ages (19-83 years) and BMI values (18.5-39.3 kg/m(2) ) were studied with both DXA and CT. RESULTS: The coefficient of determination (r(2) ) for regression of CT on DXA values was 0.947 for females, 0.891 for males and 0.915 combined. The 95% confidence interval for r was 0.940-0.969 for the combined data. The Bland-Altman test showed a VAT bias (CT as standard method) of 143 cm(3) for females and 379 cm(3) for males. Combined, the bias was 262 cm(3) with 95% limits of agreement of -232 to 755 cm(3) . While the current DXA method moderately overestimates the VAT volume for the study subjects, a further analysis suggested that the overestimation could be largely contributed to VAT movement due to breath-holding status. CONCLUSIONS: For Asian Chinese, VAT measured with DXA is highly correlated to VAT measured with CT. Validation of the DXA VAT tool using a reference method (e.g., CT) needs to carefully control the breath-holding protocol.

Visceral adipose tissue quantification using Lunar Prodigy.

A dual-energy X-ray absorptiometry (DXA) application to measure visceral adipose tissue (VAT) in the android region of a total body DXA scan has recently been developed. This new application, CoreScan, has been validated on the Lunar iDXA (GE Healthcare, Madison, WI) densitometer against volumetric computed tomography. The geometric assumptions underlying the CoreScan model are the same on the Prodigy (GE Healthcare, Madison, WI) densitometer. However, differences between the peak X-ray voltage and detector array configurations may lead to differences in VAT quantification. The purpose of this study was to evaluate the agreement of Prodigy and iDXA CoreScan values and to characterize differences in VAT precision between the instruments. Data from volunteers with paired Prodigy and iDXA measurements were used to define empirical adjustments to the VAT algorithm parameters (n=59) and validate performance on Prodigy (n=62). Prodigy VAT measurements were highly correlated to iDXA (r=0.984). The mean of the Prodigy-iDXA VAT volume differences was -13.8cm³ with a 95% confidence interval of -45 to +17cm³. The Bland-Altman 95% limits of agreement for the 2 methods were -252 to +224cm³. Measurement of short-term precision showed that measurement error variance on iDXA was smaller (p<0.01) than Prodigy (coefficient of variance: 7.3% vs 9.8%). Precision results are in agreement with previous reports on the differences between Prodigy and iDXA for body composition measures. Prodigy and iDXA measures of VAT are similar, but the lower precision of the Prodigy may require investigators to target larger changes in VAT.

A multinational study to develop universal standardization of whole-body bone density and composition using GE Healthcare Lunar and Hologic DXA systems.

Dual-energy x-ray absorptiometry (DXA) is used to assess bone mineral density (BMD) and body composition, but measurements vary among instruments from different manufacturers. We sought to develop cross-calibration equations for whole-body bone density and composition derived using GE Healthcare Lunar and Hologic DXA systems. This multinational study recruited 199 adult and pediatric participants from a site in the US (n = 40, ages 6 through 16 years) and one in China (n = 159, ages 5 through 81 years). The mean age of the participants was 44.2 years. Each participant was scanned on both GE Healthcare Lunar and Hologic Discovery or Delphi DXA systems on the same day (US) or within 1 week (China) and all scans were centrally analyzed by a single technologist using GE Healthcare Lunar Encore version 14.0 and Hologic Apex version 3.0. Paired t-tests were used to test the results differences between the systems. Multiple regression and Deming regressions were used to derive the cross-conversion equations between the GE Healthcare Lunar and Hologic whole-body scans. Bone and soft tissue measures were highly correlated between the GE Healthcare Lunar and Hologic and systems, with r ranging from 0.96 percent fat [PFAT] to 0.98 (BMC). Significant differences were found between the two systems, with average absolute differences for PFAT, BMC, and BMD of 1.4%, 176.8 g and 0.013 g/cm(2) , respectively. After cross-calibration, no significant differences remained between GE Healthcare Lunar measured results and the results converted from Hologic. The equations we derived reduce differences between BMD and body composition as determined by GE Healthcare Lunar and Hologic systems and will facilitate combining study results in clinical or epidemiological studies.

Dual-energy X-ray absorptiometry for quantification of visceral fat.

Obesity is the major risk factor for metabolic syndrome and through it diabetes as well as cardiovascular disease. Visceral fat (VF) rather than subcutaneous fat (SF) is the major predictor of adverse events. Currently, the reference standard for measuring VF is abdominal X-ray computed tomography (CT) or magnetic resonance imaging (MRI), requiring highly used clinical equipment. Dual-energy X-ray absorptiometry (DXA) can accurately measure body composition with high-precision, low X-ray exposure, and short-scanning time. The purpose of this study was to validate a new fully automated method whereby abdominal VF can be measured by DXA. Furthermore, we explored the association between DXA-derived abdominal VF and several other indices for obesity: BMI, waist circumference, waist-to-hip ratio, and DXA-derived total abdominal fat (AF), and SF. We studied 124 adult men and women, aged 18-90 years, representing a wide range of BMI values (18.5-40 kg/m(2)) measured with both DXA and CT in a fasting state within a one hour interval. The coefficient of determination (r(2)) for regression of CT on DXA values was 0.959 for females, 0.949 for males, and 0.957 combined. The 95% confidence interval for r was 0.968 to 0.985 for the combined data. The 95% confidence interval for the mean of the differences between CT and DXA VF volume was -96.0 to -16.3 cm(3). Bland-Altman bias was +67 cm(3) for females and +43 cm(3) for males. The 95% limits of agreement were -339 to +472 cm(3) for females and -379 to +465 cm(3) for males. Combined, the bias was +56 cm(3) with 95% limits of agreement of -355 to +468 cm(3). The correlations between DXA-derived VF and BMI, waist circumference, waist-to-hip ratio, and DXA-derived AF and SF ranged from poor to modest. We conclude that DXA can measure abdominal VF precisely in both men and women. This simple noninvasive method with virtually no radiation can therefore be used to measure VF in individual patients and help define diabetes and cardiovascular risk.