RESUMO
Negative hydrogen (H-) ion sources are operated with Cs injection to reduce coextracted electron current. Injected Cs atoms adhere on the surface of the electrode with extraction holes and increase the local density of H- ions. The surface work function of the extraction electrode is the key parameter determining electron transfer from the electrode to hydrogen atom leaving the surface. Thus, the work functions of the target surfaces for obtaining fundamental process data were measured with the work function diode, Kelvin probe, and photoelectric method. The measurement of the work function of the extraction electrode accompanies difficulties as probe insertion blocks the plasma flow and photoelectric signals are small. Attempts made to monitor the surface conditions for realizing better ion source operations are summarized.
RESUMO
A compact ion source that produces hydrogen plasma with an electron cyclotron resonance (ECR) configuration combined with a 2-stage extraction system with a single aperture of 6 mm diameter has been designed and built to study the performance of different materials as the plasma electrode (PE) of a negative hydrogen ion source. The source has the capability to electrically bias the PE with respect to the ECR plasma. The first experiment with low ECR power input (less than 40 W) was carried out. The PE of the C12A7 electride showed the largest H- current among aluminum, molybdenum, and the C12A7 electride.
RESUMO
We developed a small-size electron gun capable of producing electrons with kinetic energy less than few tens of eV to investigate the slowing down and transport mechanisms of electrons in hydrogen negative ion source plasmas. The maximum extractable beam current density reached 36 µA/cm2 for 1 eV beam energy in a preliminary experiment. Although the present electron current density is still insufficient compared with our target value, 1 mA/cm2, we have found some hints to realize larger beam current density from the electron gun through this study. The measured beam profile along the electron beam axis has shown that the electron beam could travel approximately 7 mm from the electron gun in vacuum. The Particle-In-Cell (PIC) simulation explained the measured beam profile well and indicated that the electron beam has an energy spread as small as 0.1 eV compared to the 1 eV mean energy. The PIC simulation showed a discrepancy from the measurement in the dependence of the electron beam current on the beam extraction voltage of the electron gun. It implies that we should introduce a more realistic filament structure inside the electron gun in the PIC simulation in order to study the transport of low energy electrons more precisely.
RESUMO
A miniature sized duoplasmatron ion source mountable on a standard 34 mm diameter copper gasket flange was designed, and its performance was tested. A hollow cathode exited a stable discharge in the anode through a 3 mm diameter orifice of the intermediate electrode with less than 10 W discharge power for Ar. The extracted ion beam current was larger at a smaller discharge current and was maximum at 5 mA below, where the discharge became unstable. A Faraday cup located 200 mm downstream of the extractor detected 1 µA beam current at 5 mA discharge current with 390 V discharge voltage and 2 kV extraction potential. The source required higher discharge voltage for operation of hydrogen gas.
RESUMO
Low energy beam transport in the energy range below 50 eV is studied using a compact ion source with a high temperature tungsten cathode that can be put into a vacuum system. A 2.6 cm diameter, 5.2 cm long compact ion source successfully produced more than 2.4 nA beam of H2 + ions at 50 eV beam energy. The source also supplied a stable beam of H3 + ions at 2.5 eV energy with more than 100 pA mass-separated current. The inside wall of the ion source was covered by thin sheets of titanium, nickel, and molybdenum to see if the species composition of the ion beam can be controlled by changing the ion source wall material. Usually, the H2 + ion peak was the highest in the mass spectrum, and the H2 + ion ratio (H2 +/Hn +) was measured for a source operation with hydrogen gas. The ion species ratio drifted against time, and Mo showed the most stable ion ratio.
RESUMO
Positive and negative hydrogen ion reflections from surfaces by injecting singly charged hydrogen ion beams show a clear difference between atomic and molecular ion injections at low energy and grazing incidence. The intensity ratio of reflected negative to positive ions H-/H+ increased as the incident beam energy per nucleon decreased only when molecular ion beams are injected. It implies that negative ions are more produced upon beam-surface interaction when molecules are injected. A possible reason was discussed in terms of difference in the negative ion production processes between atomic and molecular ions.
RESUMO
Lipids, a class of biomolecules, play a significant role in the physiological system. In this study, gas-phase hydroxyl radicals (OH·) and atomic oxygens (O) were introduced into the collision cell of a triple quadruple mass spectrometer (TQ-MS) to determine the positions of the double bond in unsaturated phospholipids. A microwave-driven compact plasma generator was used as the OH·/O source. The reaction between OH·/O and the precursor ions passing through the collision cell generates product ions that correspond to the double bond positions in the fatty acyl chain. This double bond position specific fragmentation process initiated by the attachment of OH·/O to the double bond of a fatty acyl chain is a characteristic of oxygen attachment dissociation (OAD). A TQ-MS incorporating OAD, in combination with liquid chromatography, permitted a high throughput analysis of the double bond positions in complex biomolecules. It is important to know the precise position of double bonds in lipids, since these molecules can have widely different functionalities based on the position of the double bonds. The assignment of double bond positions in a mixture of eight standard samples of phosphatidylcholines (phospholipids with choline head groups) with multiple saturated fatty acyl chains attached was successfully demonstrated.
RESUMO
A negative hydrogen ion source delivers more beam current when Cs is introduced to the discharge, but a continuous operation of the source reduces the beam current until more Cs is added to the source. This behavior can be explained by adsorption and ion induced desorption of Cs atoms on the plasma grid surface of the ion source. The interaction between the ion source plasma and the plasma grid surface of a negative hydrogen ion source is discussed in correlation to the Cs consumption of the ion source. The results show that operation with deuterium instead of hydrogen should require more Cs consumption and the presence of medium mass impurities as well as ions of the source wall materials in the arc discharge enlarges the Cs removal rate during an ion source discharge.
RESUMO
Gas-phase hydrogen radicals were introduced into a quadrupole ion trap containing singly charged phospholipids to obtain structural fragmentation patterns in tandem mass spectrometry (MS/MS). Saturated and unsaturated phosphatidylcholines were used as a model phospholipid, whose chain-length ranges between 16 and 24. The MS/MS spectrum yielded a continuous series of fragment ions with a mass difference of 14 Da, representing the saturated fatty acyl chains. The fragment ions corresponding to the double-bond position within a single fatty acyl chain showed a characteristic mass difference of 12 Da. The detection of these diagnostic product ions enabled the structural analysis of double-bond isomers of phospholipids. To further investigate the potential of radical-induced dissociation for the isomeric analysis of phospholipids, gas-phase hydroxyl radicals, and triplet oxygen atoms were employed in tandem mass spectrometry. The methylene bridges adjacent to the double-bond positions were selectively dissociated, accompanied by oxidation of the double bonds. Tandem mass spectrometry incorporating multiple radical species facilitates the structural analysis of isomeric phospholipids.
Assuntos
Hidrogênio/química , Oxigênio/química , Fosfolipídeos/química , Espectrometria de Massas em Tandem , Radicais Livres/química , Estrutura MolecularRESUMO
A thermal cracking cell that served as the atomic hydrogen source for hydrogen attachment/abstraction dissociation (HAD) analysis has an intrinsic problem to produce a beam of atoms reactive against heated tungsten capillary. A plasma excited by 2.45 GHz microwave discharge can deliver reactive species to a quadrupole ion trap confining analyte ions without excessive heating of the radical source components. The radical (Hâ¢) production performance of the developed source was evaluated by optical emission spectroscopy and H⢠attachment reaction to fullerene ions. The source exhibited the H⢠attachment rate as high as a thermal cracking source forming H⢠in the high temperature tungsten capillary to induce fragmentation processes preserving post-translational modifications. Water vapor was introduced to the source to confirm the stability to generate oxygen containing radicals, which were found present in the water vapor plasma together with atomic hydrogen. Injection of radicals from a water vapor plasma successfully dissociated peptide ions to c-/z- and a-/x-type ions as the case of HAD induced by a thermal cracking cell.
Assuntos
Hidrogênio/química , Micro-Ondas , Peptídeos/análise , Gases em Plasma/química , Água/química , Íons/análise , Espectrometria de Massas em Tandem , VolatilizaçãoRESUMO
Dissociation of gas-phase peptide ions through interaction with low-energy hydrogen (H) radical (â¼0.15 eV) was observed with a quadrupole ion trap mass spectrometry. The H radical generated by thermal dissociation of H2 molecules passing through a heated tungsten capillary (â¼2000 °C) was injected into the ion trap containing target peptide ions. The fragmentation spectrum showed abundant c-/z- and a-/x-type ions, attributable to H attachment/abstraction to/from peptide ion. Because the low-energy neutral H radical initiated the fragmentation, the charge state of the precursor ion was maintained during the dissociation. As a result, precursor ions of any charge state, including singly charged positive and negative ions, could be analyzed for amino acid sequence. The sequence coverage exceeding 90% was obtained for both singly protonated and singly deprotonated substance P peptide. This mass spectrometry also preserved labile post-translational modification bonds. The modification sites of triply phosphorylated peptide (kinase domain of insulin receptor) were identified with the sequence coverage exceeding 80%.
Assuntos
Hidrogênio/química , Peptídeos/análise , Espectrometria de Massas em Tandem/métodos , Sequência de AminoácidosRESUMO
The functions of a biased plasma grid of a negative hydrogen (H(-)) ion source for both pure volume and Cs seeded operations are reexamined. Proper control of the plasma grid bias in pure volume sources yields: enhancement of the extracted negative ion current, reduction of the co-extracted electron current, flattening of the spatial distribution of plasma potential across the filter magnetic field, change in recycling from hydrogen atomic/molecular ions to atomic/molecular neutrals, and enhanced concentration of H(-) ions near the plasma grid. These functions are maintained in the sources seeded with Cs with additional direct emission of negative ions under positive ion and neutral hydrogen bombardment onto the plasma electrode.