How to Measure Polymer Degradation? An Analysis of Authors' Choices When Calculating the Carbonyl Index.

The carbonyl index aims to measure the degradation level and is used in plastic degradation research as a proxy for the general degradation level of collected plastic pieces. According to the choices for carbonyl index calculation, comparison using this index is prevented and must be unveiled by the authors, which does not always happen. In order to study the proper usage of the carbonyl index, regarding the choice of the reference band and the usage of the band intensity or the absorption area, we systematically reviewed the methodologies used for polypropylene as a case study. Based on 95 studies gathered from 2000 to 2024, two main methods were used to determine the carbonyl index: the ratio between the carbonyl band area and the reference band area (33.68%) and the ratio between the highest intensity of the carbonyl band and the reference band (66.31%). The reference band of choice and the type of calculation method produce different carbonyl index values for the same spectra and mean different information, preventing comparison among works with different calculations.

Toxicity of Aged Paint Particles to Soil Ecosystems: Insights from Caenorhabditis elegans.

Despite the extensive global consumption of architectural paint, the toxicological effects of aged exterior paint particles on terrestrial biota remain largely uncharacterized. Herein, we assessed the toxic effect of aged paint particles on soil environments using the nematode Caenorhabditis elegans (C. elegans) as a test organism. Various types of paint particles were generated by fragmentation and sequential sieving (500-1000, 250-500, 100-250, 50-100, 20-50 µm) of paint coatings collected from two old residential areas. The paint particles exerted different levels of toxicity, as indicated by a reduction in the number of C. elegans offspring, depending on their size, color, and layer structure. These physical characteristics were found to be closely associated with the chemical heterogeneity of additives present in the paint particles. Since the paint particle sizes were larger than what C. elegans typically consume, we attributed the toxicity to leachable additives present in the paint particles. To assess the toxicity of these leachable additives, we performed sequential washings of the paint particles with distilled water and ethanol. Ethanol washing of the paint particles significantly reduced the soil toxicity of the hydrophobic additives, indicating their potential environmental risk. Liquid chromatography-mass spectrometry analysis of the ethanol leachate revealed the presence of alkyl amines, which exhibited a high correlation with the toxicity of the paint particles. Further toxicity testing using an alkyl amine standard demonstrated that a paint particle concentration of 1.2% in soil could significantly reduce the number of C. elegans offspring. Our findings provide insights into the potential hazards posed by aged paint particles and their leachable additives in the terrestrial environment.

How natural and anthropogenic factors should drive microplastic behavior and fate: The scenario of Brazilian urban freshwater.

Brazil maintains its position at the top of the global ranking of plastic producers, yet recycling efforts have been incipient. Recent data reveals an annual production of approximately 14 million tons of plastic waste, not accounting for the surge in the usage of plastic masks and related materials due to the COVID-19 pandemic. However, what remains largely unreported is that over half of post-consumer plastic packaging in Brazil is managed without any monitoring, and it remains unclear how this will contribute to the occurrence of plastic waste and microplastics in Brazilian freshwaters. This scenario requires the consideration of several other crucial factors. Studies have been carried out mainly in marine and estuarine waters, while data on freshwaters are lacking. Brazil has continental dimensions and the highest water availability on the planet, yet the demand for water is greatest in regions with medium to low supply. Many densely populated Brazilian urban areas face chronic flood problems, possess inadequate levels of wastewater treatment, and display inadequate solid waste management practices. Consequently, urban freshwater with tropical characteristics in Brazil presents an intriguing scenario and is complementary to the most commonly studied marine environments. In this study, we explore the nuances of pollution in Brazilian urban freshwater and discuss how various parameters, such as organic matter, suspended solids, temperature, and pH, among others, influence the behavior of microplastics and their interactions with organic and inorganic contaminants. Furthermore, we address how microplastic conditions, such as biofouling, the type of plastic, or degradation level, may impact their behavior. By analyzing how these conditions change, we propose priority themes for investigating the occurrence of microplastics in Brazilian urban freshwater systems under different degrees of human impact. Ultimately, this study aims to establish a network dedicated to standardized monitoring of microplastic pollution in Brazilian urban freshwaters.

New separation protocol reveals spray painting as a neglected source of microplastics in soils.

Microplastics are recently discovered contaminants, yet knowledge on their sources and analysis is limited. For instance, paint microplastics are poorly known because soil separation protocols using flotation solutions cannot separate paint microplastics due to the higher density of paint microplastic versus common microplastics. Here, we designed a new two-step density separation protocol for paint microplastics, allowing paint microplastics to be separated from the soil without digestion. Paint particles were separated from soil samples collected around the graffiti wall at the Mauerpark, Berlin, then quantified according to their shape and color characteristic. The presence of polymers as binders in the paint particles was verified by Fourier transform infrared spectroscopy. Results show concentrations from 1.1 × 105 to 2.9 × 105 microplastics per Kg of dry soil, representing the highest microplastic concentration ever reported in the literature. Particle concentrations decreased and the median size increased with soil depth. Our results provide first evidence that spray painting, a technique with a wide range of applications from industry to art, leaves a legacy of environmental microplastic in soils that has so far gone unnoticed. Supplementary Information: The online version contains supplementary material available at 10.1007/s10311-022-01500-2.

Mechanisms underpinning nonadditivity of global change factor effects in the plant-soil system.

Plant-soil systems are key for understanding the effects of factors of global change. Recent work has highlighted the general importance of considering the simultaneous incidence of some factors or stressors. To help mechanistically dissect the possible interactions of such factors, we here propose three broad groups of mechanisms that may generally lead to nonadditivity of responses within a plant-soil system: direct factor interactions (that is one factor directly changing another), within-plant information processing and crosstalk, and effects of factors on groups of soil biota interacting with plants. Interactions are also possible within and across these groups. Factor interactions are very likely to be present in experiments, especially when dealing with an increasing number of factors. Identifying the nature of such interactions will be essential for understanding and predicting global change impacts on plants and soil.

Effects of Different Microplastics on Nematodes in the Soil Environment: Tracking the Extractable Additives Using an Ecotoxicological Approach.

With increasing interest in the effects of microplastics on the soil environment, there is a need to thoroughly evaluate the potential adverse effects of these particles as a function of their characteristics (size, shape, and composition). In addition, extractable chemical additives from microplastics have been identified as an important toxicity pathway in the aquatic environment. However, currently, little is known about the effects of such additives on the soil environment. In this study on nematodes (Caenorhabditis elegans), we adopted an ecotoxicological approach to assess the potential effects of 13 different microplastics (0.001-1% of soil dry weight) with different characteristics and extractable additives. We found that poly(ethylene terephthalate) (PET) fragments and polyacrylicnitrile (PAN) fibers show the highest toxicity, while high-density polyethylene (HDPE), polypropylene (PP), and polystyrene (PS) fragments induced relatively less adverse effects on nematodes. In addition, low-density polyethylene (LDPE) induced no toxicity within our test concentration range for the acute period. Acute toxicity was mainly attributed to the extractable additives: when the additives were extracted, the toxic effects of each microplastic disappeared in the acute soil toxicity test. The harmful effects of the LDPE films and PAN fibers increased when the microplastics were maintained in the soil for a long-term period with frequent wet-dry cycles. We here provide clear evidence that microplastic toxicity in the soil is highly related to extractable additives. Our results suggest that future experiments consider extractable additives as key explanatory variables.

TiO2 sol-gel for formaldehyde photodegradation using polymeric support: photocatalysis efficiency versus material stability.

Photocatalysts supported on polymers are not frequently used in heterogeneous photocatalysis because of problems such as wettability and stability that affect photocatalysis conditions. In this work, we used polypropylene as support for TiO2 sol-gel to evaluate its stability and efficiency under UV radiation. We also tested the effect of the thermo-pressing PP/TiO2 system on the photocatalytic efficiency and stability under UV radiation. The films were characterized by scanning electron microscopy (SEM), UV-Vis spectroscopy and X-ray diffraction (XRD). The SEM micrographs showed that the films of TiO2 sol-gel onto PP has approximately 1.0-µm thick and regular surface and the generation of polypropylene nanowires on hot-pressed samples. XRD showed the formation of TiO2 anatase on the surface of the films made by dip-coating. All photocatalysts were tested in decontaminating air-containing gaseous formaldehyde (70 ppmv) presenting degradation of the target compound to the limit of detection. The photocatalysts showed no deactivation during the entire period tested (30 h), and its reuse after washing showed better photocatalytic performance than on first use. The photocatalyst showed the best results were tested for 360 h with no observed deactivation. Aging studies showed that the film of TiO2 causes different effects on the photostability of composites, with stabilizing effect when exposed to most energetic UVC radiation (λmax = 254 nm) and degradative effects when exposed to UVA radiation (λmax = 365 nm).