RESUMO
Forensic fractographic features of bone reliably establish crack propagation in perimortem injuries. We investigated if similar fracture surface features characterize postmortem fractures. Experimentally induced peri- and postmortem fractures were used to assess if fractographic features vary as bone elasticity decreases during the postmortem interval (PMI). Thirty-seven unembalmed, defleshed human femoral shafts from males and females aged 33-81 years were fractured at varying PMIs with a drop test frame using a three-point bending setup and recorded with a high-speed camera. Vital statistics, cause of death, PMI length, temperature, humidity, collagen percentage, water loss, fracture energy, and fractography scores were recorded for each sample. Results showed that fractographic features associated with perimortem fractures were expressed in PMIs up to 40,600 accumulated degree hours (ADH), or 60 warm weather days. Hackle was the most consistently expressed feature, occurring in all fractures regardless of ADH. The most variable characteristics were wake features (78.4%) and arrest ridges (70.3%). Collagen percentage did not correlate strongly with ADH (r = -0.04, p = 0.81); however, there was a strong significant correlation between ADH and water loss (r = 0.74, p < 0.001). Multinomial logistic regression showed no association between fractographic feature expression and ADH or collagen percentage. In conclusion, forensic fractographic features reliably determine initiation and directionality of crack propagation in experimentally induced PMIs up to 40,600 ADH, demonstrating the utility of this method into the recent postmortem interval. This expression of reliable fractographic features throughout the early PMI intimates these characteristics may not be useful standalone features for discerning peri- versus postmortem fractures.
Assuntos
Fraturas Ósseas , Mudanças Depois da Morte , Humanos , Masculino , Feminino , Antropologia Forense/métodos , Elasticidade , Colágeno , ÁguaRESUMO
Injectable polymers have attracted intensive attention in tissue engineering and drug delivery applications. Current injectable polymer systems often require free-radical or heavy-metal initiators and catalysts for the crosslinking process, which may be extremely toxic to the human body. Here, we report a novel polyhedral oligomeric silsesquioxane (POSS) based strain-promoted alkyne-azide cycloaddition (SPAAC) "click" organic-inorganic nanohybrids (click-ON) system that can be click-crosslinked without any toxic initiators or catalysts. The click-ON scaffolds supported excellent adhesion, proliferation, and osteogenesis of stem cells. In vivo evaluation using a rat cranial defect model showed outstanding bone formation with minimum cytotoxicity. Essential osteogenic alkaline phosphatase (ALP) and vascular CD31 marker expression were detected on the defect site, indicating excellent support of in vivo osteogenesis and vascularization. Using salt leaching techniques, an injectable porous click-ON cement was developed to create porous structures and support better in vivo bone regeneration. Beyond defect filling, the click-ON cement also showed promising application for spinal fusion using rabbits as a model. Compared to the current clinically used poly (methyl methacrylate) (PMMA) cement, this click-ON cement showed great advantages of low heat generation, better biocompatibility and biodegradability, and thus has great potential for bone and related tissue engineering applications.
Assuntos
Cimentos Ósseos , Engenharia Tecidual , Animais , Regeneração Óssea , Hidrogéis , Osteogênese , Coelhos , Ratos , Alicerces TeciduaisRESUMO
Most of the synthetic polymer-based hydrogels lack the intrinsic properties needed for tissue engineering applications. Here, we describe a biomimetic approach to induce the mineralization and vascularization of poly(ethylene glycol) (PEG)-based hydrogel to template the osteogenic activities. The strategy involves the covalent functionalization of oligo[poly(ethylene glycol) fumarate] (OPF) with phosphate groups and subsequent treatment of phosphorylated-OPF (Pi-OPF) hydrogels with alkaline phosphatase enzyme (ALP) and calcium. Unlike previously reported studies for ALP induced mineralization, in this study, the base polymer itself was modified with the phosphate groups for uniform mineralization of hydrogels. In addition to improvement of mechanical properties, enhancement of MC3T3-E1 cell attachment and proliferation, and promotion of mesenchymal stem cells (MSC) differentiation were observed as the intrinsic benefits of such mineralization. Current bone tissue engineering (BTE) research endeavors are also extensively focused on vascular tissue regeneration due to its inherent advantages in bone regeneration. Taking this into account, we further functionalized the mineralized hydrogels with FG-4592, small hypoxia mimicking molecule. The functionalized hydrogels elicited upregulated in vitro angiogenic activities of human umbilical vein endothelial cells (HUVEC). In addition, when implanted subcutaneously in rats, enhanced early vascularization activities around the implantation site were observed as demonstrated by the immunohistochemistry results. This further leveraged the formation of calcified tissues at the implantation site at later time points evident through X-ray imaging. The overall results here show the perspectives of bifunctional OPF hydrogels for vascularized BTE.
Assuntos
Células Endoteliais , Hidrogéis , Animais , Regeneração Óssea , Osso e Ossos , Hidrogéis/farmacologia , Osteogênese , Polietilenoglicóis , Ratos , Engenharia TecidualRESUMO
Spinal cord injury (SCI) results in cell death, demyelination, and axonal loss. The spinal cord has a limited ability to regenerate, and current clinical therapies for SCI are not effective in helping promote neurologic recovery. We have developed a novel scaffold biomaterial that is fabricated from the biodegradable hydrogel oligo(poly(ethylene glycol)fumarate) (OPF). We have previously shown that positively charged OPF scaffolds (OPF+) in an open spaced, multichannel design can be loaded with Schwann cells to support axonal generation and functional recovery following SCI. We have now developed a hybrid OPF+ biomaterial that increases the surface area available for cell attachment and that contains an aligned microarchitecture and extracellular matrix (ECM) proteins to better support axonal regeneration. OPF+ was fabricated as 0.08 mm thick sheets containing 100 µm high polymer ridges that self-assemble into a spiral shape when hydrated. Laminin, fibronectin, or collagen I coating promoted neuron attachment and axonal outgrowth on the scaffold surface. In addition, the ridges aligned axons in a longitudinal bipolar orientation. Decreasing the space between the ridges increased the number of cells and neurites aligned in the direction of the ridge. Schwann cells seeded on laminin coated OPF+ sheets aligned along the ridges over a 6-day period and could myelinate dorsal root ganglion neurons over 4 weeks. This novel scaffold design, with closer spaced ridges and Schwann cells, is a novel biomaterial construct to promote regeneration after SCI.
RESUMO
3D bioprinting is a promising new tissue restoration technique that enables the precise deposition of cells and growth factors in order to more closely mimic the structure and function of native organs. In this study, we report the development of a new bioink using oligo(poly[ethylene glycol] fumarate) (OPF), a photo-crosslinkable, and biodegradable polymer, for 3D bioprinting. In addition to OPF, a small portion of gelatin was also incorporated into the bioink to make it bio-printable. After immersion in the cell medium, gelatin was eluted away to create a bioprinted scaffold of pure OPF. Excellent cell viability, spreading, and long-term proliferation of encapsulated cells was observed using both bone and nerve cells as examples. These results demonstrate that OPF bioink has great potential in future 3D bioprinting applications that aim to replicate complex, layered tissues, and/or organs.
Assuntos
Regeneração Óssea/efeitos dos fármacos , Fumaratos/química , Regeneração Nervosa/efeitos dos fármacos , Polietilenoglicóis/química , Impressão Tridimensional , Engenharia Tecidual/métodos , Células 3T3 , Animais , Bioimpressão , Osso e Ossos/efeitos dos fármacos , Proliferação de Células/efeitos dos fármacos , Sobrevivência Celular , Reagentes de Ligações Cruzadas , Gelatina , Hidrogéis , Camundongos , Tecido Nervoso/efeitos dos fármacos , Neurônios/efeitos dos fármacos , Osteócitos/efeitos dos fármacos , Alicerces TeciduaisRESUMO
Three-dimensional (3D) printing is a promising technology for tissue engineering. However, 3D-printing methods are limited in their ability to produce desired microscale features or electrochemical properties in support of robust cell adhesion, proliferation, and differentiation. This study addresses this deficiency by proposing an integrated, one-step, method to increase the cytocompatibility of 3D-printed scaffolds through functionalization leveraging conductive carbon nanotubes (CNTs). To this end, CNTs were first sonicated with water-soluble single-stranded deoxyribonucleic acid (ssDNA) to generate a negatively charged ssDNA@CNT nano-complex. Concomitantly, 3D-printed poly(propylene fumarate) (PPF) scaffolds were ammonolyzed to introduce free amine groups, which can take on a positive surface charge in water. The ssDNA@CNT nano-complex was then applied to 3D-printed scaffolds through a simple one-step coating utilizing electric-static force. This fast and facile functionalization step resulted in a homogenous and non-toxic coating of CNTs to the surface, which significantly improved the adhesion, proliferation, and differentiation of pre-osteoblast cells. In addition, the CNT based conductive coating layer enabled modulation of cell behavior through electrical stimuli (ES) leading to cellular proliferation and osteogenic gene marker expression, including alkaline phosphatase (ALP), osteocalcin (OCN), and osteopontin (OPN). Collectively, these data provide the foundation for a one-step functionalization method for simple, fast, and effective functionalization of 3D printed scaffolds that support enhanced cell adhesion, proliferation, and differentiation, especially when employed in conjunction with ES. STATEMENT OF SIGNIFICANCE: Three-dimensional (3D) printing is a promising technology for tissue engineering. However, 3D-printing methods have limited ability to produce desired features or electrochemical properties in support of robust cell behavior. To address this deficiency, the current study proposed an integrated, one-step method to increase the cytocompatibility of 3D-printed scaffolds through functionalization leveraging conductive carbon nanotubes (CNTs). This fast and facile functionalization resulted in a homogenous and non-toxic coating of CNTs to the surface, which significantly improved the adhesion, proliferation, and differentiation of cells on the 3D-printed scaffolds.
Assuntos
Nanotubos de Carbono , Engenharia Tecidual , Osso e Ossos , Diferenciação Celular , Proliferação de Células , Osteogênese , Impressão Tridimensional , Alicerces TeciduaisRESUMO
Injectable hydrogels have unique advantages for the repair of irregular tissue defects. In this study, we report a novel injectable carbon nanotube (CNT) and black phosphorus (BP) gel with enhanced mechanical strength, electrical conductivity, and continuous phosphate ion release for tissue engineering. The gel utilized biodegradable oligo(poly(ethylene glycol) fumarate) (OPF) polymer as the cross-linking matrix, with the addition of cross-linkable CNT-poly(ethylene glycol)-acrylate (CNTpega) to grant mechanical support and electric conductivity. Two-dimensional (2D) black phosphorus nanosheets were also infused to aid in tissue regeneration through the steady release of phosphate that results from environmental oxidation of phosphorus in situ. This newly developed BP-CNTpega-gel was found to enhance the adhesion, proliferation, and osteogenic differentiation of MC3T3 preosteoblast cells. With electric stimulation, the osteogenesis of preosteoblast cells was further enhanced with elevated expression of several key osteogenic pathway genes. As monitored with X-ray imaging, the BP-CNTpega-gel demonstrated excellent in situ gelation and cross-linking to fill femur defects, vertebral body cavities, and posterolateral spinal fusion sites in the rabbit. Together, these results indicate that this newly developed injectable BP-CNTpega-gel owns promising potential for future bone and broad types of tissue engineering applications.
Assuntos
Nanotubos de Carbono , Engenharia Tecidual , Animais , Condutividade Elétrica , Osteogênese , Fosfatos , Fósforo , CoelhosRESUMO
A new PPF-BCN/hyPCL32-N3 injectable system that can be cross-linked by catalyst-free, strain promoted alkyne-azide cycloaddition (SPAAC) click chemistry was developed for tissue engineering applications. The system consisted of two components: PPF-BCN, poly(propylene fumarate) (PPF) functionalized with (1R,8S,9s)-bicyclo[6.1.0]non-4-yn-9-ylmethanol (BCN-OH), and hyPCL32-N3, a hyper-branched 32-arm poly(ε-caprolactone) (PCL) dendrimer functionalized with azide as the cross-linker core. Fast SPAAC click reaction allowed the desired gelation of the system without using any toxic initiator or catalyst. Compared to the conventional injectable formulation, e.g., poly(methyl methacrylate) (PMMA), our PPF-BCN/hyPCL32-N3 (abbreviated as PFCL-Click) injectable system showed enhanced biocompatibility and low heat generation during cross-linking. After reaction, the cross-linked PFCL-Click scaffolds supported excellent proliferation and differentiation of preosteoblast cells on the surface. The PFCL-Click system can be successfully injected into vertebral bodies of rabbit spine and can be monitored by X-ray imaging after incorporating zirconium dioxide (ZrO2) powder. With these unique advantages, this injectable system has promising potential for bone defect repair and other tissue engineering and regenerative medicine applications.
Assuntos
Fumaratos/química , Poliésteres/química , Polipropilenos/química , Coluna Vertebral/efeitos dos fármacos , Engenharia Tecidual , Alcinos/química , Animais , Azidas/química , Química Click , Reagentes de Ligações Cruzadas/química , Reação de Cicloadição , Fumaratos/síntese química , Fumaratos/farmacologia , Humanos , Poliésteres/síntese química , Poliésteres/farmacologia , Polimetil Metacrilato/química , Polimetil Metacrilato/farmacologia , Polipropilenos/síntese química , Polipropilenos/farmacologia , Coelhos , Medicina Regenerativa , Coluna Vertebral/fisiopatologiaRESUMO
Two-dimensional (2D) materials have emerged as a new promising research topic for tissue engineering because of their ability to alter the surface properties of tissue scaffolds and thus improve their biocompatibility and cell affinity. Multiple 2D materials, such as graphene and graphene oxide (GO), have been widely reported to enhance cell adhesion and proliferation. Recently, a newly emerged black phosphorus (BP) 2D material has attracted attention in biomedical applications because of its unique mechanical and electrochemical characteristics. In this study, we investigated the synergistic effect of these two types of 2D materials on cell osteogenesis for bone tissue engineering. BP was first wrapped in negatively charged GO nanosheets, which were then adsorbed together onto positively charged poly(propylene fumarate) three-dimensional (3D) scaffolds. The increased surface area provided by GO nanosheets would enhance cell attachment at the initial stage. In addition, slow oxidation of BP nanosheets wrapped within GO layers would generate a continuous release of phosphate, an important osteoblast differentiation facilitator designed to stimulate cell osteogenesis toward the new bone formation. Through the use of 3D confocal imaging, unique interactions between cells and BP nanosheets were observed, including a stretched cell shape and the development of filaments around the BP nanosheets, along with increased cell proliferation when compared with scaffolds incorporating only one of the 2D materials. Furthermore, the biomineralization of 3D scaffolds, as well as cellular osteogenic markers, was all measured and improved on scaffolds with both BP and GO nanosheets. All these results indicate that the incorporation of 2D BP and GO materials could effectively and synergistically stimulate cell proliferation and osteogenesis on 3D tissue scaffolds.
Assuntos
Grafite/química , Osteogênese/efeitos dos fármacos , Fósforo/química , Engenharia Tecidual , Animais , Osso e Ossos/efeitos dos fármacos , Proliferação de Células/efeitos dos fármacos , Grafite/farmacologia , Humanos , Fósforo/farmacologia , Impressão Tridimensional , Alicerces Teciduais/químicaRESUMO
We are developing electrical approaches to treat biofilm-associated orthopedic foreign-body infection. Although we have previously shown that such approaches have antibiofilm activity, the effects on bone have not been assessed. Herein, low-amperage 200 µA fixed direct current (DC) was compared with no current, in a rat femoral foreign-body infection model. In the infected group, a platinum implant seeded with S. epidermidis biofilm (105 CFU/cm2), plus 50 µL of a 109 CFU suspension of bacteria, were placed in the femoral medullary cavity of 71 rats. One week later, rats were assigned to one of four groups: infected with no current or DC, or uninfected with no current or DC. After 2 weeks, bones were removed and subjected to histopathology, micro-computed tomography (µCT), and strength testing. Histopathology showed no inflammation or bony changes/remodeling in the uninfected no current group, and some osteoid formation in the DC group; bones from the infected no current group had evidence of inflammation without bony changes/remodeling; along with inflammation, there was moderate osteoid present in the DC group. µCT showed more cortical bone volume and density, trabecular thickness, and cancellous bone volume in the DC group compared with the no current group, for both uninfected and infected bones (p < 0.05). There was no difference in torsional strength or stiffness between the no current versus DC groups, for both infected and uninfected bones (p > 0.05). © 2018 The Authors. JBMR Plus Published by Wiley Periodicals, Inc. on behalf of the American Society for Bone and Mineral Research.
RESUMO
BACKGROUND: Osteosarcoma is the most common bone cancer. Despite advances, molecular mechanisms associated with osteosarcoma have not been fully understood. Hence, an effective treatment for osteosarcoma has yet to be developed. Even though signal transducer and activator of transcription3 (STAT3) has been implicated, its role in pathogenesis of osteosarcoma is not fully determined. In this study, we investigated the antitumor effect of napabucasin (NP) (BBI608), an inhibitor of STAT3 on osteosarcoma in vitro and in vivo and studied the underlying molecular mechanism. METHODS: Cell viability, colony formation, apoptosis, tumor growth and metastasis assays were performed to examine the effect of NP on osteosarcoma in vitro and in vivo. Real-time RT-PCR, western analysis, immunofluorescence and reporter assays were used to monitor the expression and activity of proteins and underlying molecular pathways. Protein synthesis, co-immunoprecipitation and CAP binding assays were carried out to understand NP-mediated mechanism of actions in osteosarcoma cells. RESULTS: Our results show that NP treatment decreases cell viability and induces apoptosis in several osteosarcoma cell lines. NP treatment suppresses both expression and phosphorylation of STAT3 in addition to blocking STAT3-mediated transcription and downstream target proteins in osteosarcoma cells. Furthermore, NP inhibits protein synthesis through regulation of the eukaryotic initiation factor 4E (eIF4E) and eIF4E-binding protein 1 (4E-BP1). NP also inhibits the progression of osteosarcoma tumors and metastasis in vivo in an orthotopic tibial model of osteosarcoma. CONCLUSIONS: Taken together, our investigation reveals that NP acts through a novel mechanism and inhibits osteosarcoma growth and metastasis, and could be investigated clinically for treating osteosarcoma patients alone or in combination with other drugs.
Assuntos
Benzofuranos/farmacologia , Neoplasias Ósseas/tratamento farmacológico , Naftoquinonas/farmacologia , Osteossarcoma/tratamento farmacológico , Fator de Transcrição STAT3/antagonistas & inibidores , Animais , Apoptose/efeitos dos fármacos , Neoplasias Ósseas/metabolismo , Neoplasias Ósseas/patologia , Linhagem Celular Tumoral , Feminino , Humanos , Camundongos , Camundongos Endogâmicos BALB C , Camundongos Nus , Metástase Neoplásica , Osteossarcoma/metabolismo , Osteossarcoma/patologia , Inibidores da Síntese de Proteínas/farmacologia , Distribuição Aleatória , Ensaios Antitumorais Modelo de XenoenxertoRESUMO
IMPACT STATEMENT: This article describes the feasibility and path to establishing a current good manufacturing practice biomaterial facility in an academic medical center. It presents a solution to overcome the "Valley of Death" in bench to bedside translation of biomaterials-based medical devices. It sets a good and feasible example to those who are interested in joining the path toward clinical practice/commercialization, and helps to spur other institutions and investigators to think about how they could incorporate in-house processes and facilities to help speed up the translation of their work into first-in-human trials.
Assuntos
Centros Médicos Acadêmicos/organização & administração , Materiais Biocompatíveis/química , Atenção à Saúde/normas , Arquitetura de Instituições de Saúde/normas , Prática Profissional/normas , Engenharia Tecidual/métodos , HumanosRESUMO
A wide range of materials have been used for the development of intervertebral cages. Poly(propylene fumarate) (PPF) has been shown to be an excellent biomaterial with characteristics similar to trabecular bone. Hydroxyapatite (HA) has been shown to enhance biocompatibility and mechanical properties of PPF. The purpose of this study was to characterize the effect of PPF augmented with HA (PPF:HA) and evaluate the feasibility of this material for the development of cervical cages. PPF was synthesized and combined with HA at PPF:HA wt:wt ratios of 100:0, 80:20, 70:30, and 60:40. Molds were fabricated for testing PPF:HA bulk materials in compression, bending, tension, and hardness according to ASTM standards, and also for cage preparation. The cages were fabricated with and without holes and with porosity created by salt leaching. The samples as well as the cages were mechanically tested using a materials testing frame. All elastic moduli as well as the hardness increased significantly by adding HA to PPF (p < 0.0001). The 20 wt % HA increased the moduli significantly compared to pure PPF (p < 0.0001). Compressive stiffness of all cages also increased with the addition of HA. HA increased the failure load of the porous cages significantly (p = 0.0018) compared with nonporous cages. PPF:HA wt:wt ratio of 80:20 proved to be significantly stiffer and stronger than pure PPF. The current results suggest that this polymeric composite can be a suitable candidate material for intervertebral body cages.
Assuntos
Vértebras Cervicais/cirurgia , Durapatita/química , Fumaratos/química , Nanocompostos , Polipropilenos/química , Fusão Vertebral , Materiais Biocompatíveis , Força Compressiva , Composição de Medicamentos , Estudos de Viabilidade , Teste de Materiais , PorosidadeRESUMO
Graphene oxide (GO) is an attractive material that can be utilized to enhance the modulus and conductivities of substrates and hydrogels. To covalently cross-link graphene oxide sheets into hydrogels, abundant cross-linkable double bonds were introduced to synthesize the graphene-oxide-tris-acrylate sheet (GO-TrisA). Polyacrylamide (PAM) nanocomposite hydrogels were then fabricated with inherent covalently and permanently cross-linked GO-TrisA sheets. Results showed that the covalently cross-linked GO-TrisA/PAM nanocomposite hydrogel had enhanced mechanical strength, thermo stability compared with GO/PAM hydrogel maintained mainly by hydrogen bonding between PAM chains and GO sheets. In vitro cell study showed that the covalently cross-linked rGO-TrisA/PAM nanocomposite hydrogel had excellent cytocompatibility after in situ reduction. These results suggest that rGO-TrisA/PAM nanocomposite hydrogel holds great potential for tissue engineering applications. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1247-1257, 2018.
Assuntos
Reagentes de Ligações Cruzadas/química , Grafite/química , Fenômenos Mecânicos , Nanocompostos/química , Engenharia Tecidual/métodos , Acrilatos/química , Animais , Grafite/síntese química , Células PC12 , RatosRESUMO
Nerve regeneration after injury is a critical medical issue. In previous work, we have developed an oligo(poly(ethylene glycol) fumarate) (OPF) hydrogel incorporated with positive charges as a promising nerve conduit. In this study, we introduced cross-linkable bonds to graphene oxide and carbon nanotube to obtain the functionalized graphene oxide acrylate (GOa) and carbon nanotube poly(ethylene glycol) acrylate (CNTpega). An electrically conductive hydrogel was then fabricated by covalently embedding GOa and CNTpega within OPF hydrogel through chemical cross-linking followed by in situ reduction of GOa in l-ascorbic acid solution. Positive charges were incorporated by 2-(methacryloyloxy)ethyltrimethylammonium chloride (MTAC) to obtain rGOaCNTpega-OPF-MTAC composite hydrogel with both surface charge and electrical conductivity. The distribution of CNTpega and GOa in the hydrogels was substantiated by transmission electron microscopy (TEM), and strengthened electrical conductivities were determined. Excellent biocompatibility was demonstrated for the carbon embedded composite hydrogels. Biological evaluation showed enhanced proliferation and spreading of PC12 cells on the conductive hydrogels. After induced differentiation using nerve growth factor (NGF), cells on the conductive hydrogels were effectively stimulated to have robust neurite development as observed by confocal microscope. A synergistic effect of electrical conductivity and positive charges on nerve cells was also observed in this study. Using a glass mold method, the composite hydrogel was successfully fabricated into conductive nerve conduits with surficial positive charges. These results suggest that rGOa-CNTpega-OPF-MTAC composite hydrogel holds great potential as conduits for neural tissue engineering.
Assuntos
Nanotubos de Carbono , Animais , Diferenciação Celular , Grafite , Hidrogéis , Óxidos , Polietilenoglicóis , RatosRESUMO
Scaffolds with porous structures are highly applicable for tissue engineering and regenerative medicine. In the present study, 3-dimensional poly(propylene fumarate-co-caprolactone) [P(PF-co-CL)] scaffolds were fabricated from a P(PF-co-CL)-dioxane-water ternary system through thermally induced phase separation (TIPS). Cloud points of P(PF-co-CL) in dioxane-water solutions increased with increased solute concentration, but increased dioxane composition decreased cloud point. Among 3 polymer concentrations (4, 8, and 12 wt%), 8 wt% P(PF-co-CL) scaffolds exhibited the best pore interconnectivity, with large, regular sized pores. Scaffolds were formed in 3 solutions with different dioxane-water ratios (74/26, 78/22, and 82/18 wt/wt); the 78/22 wt/wt scaffold had finger-shaped patterns with better interconnectivity than scaffolds from the other two ratios. Higher dioxane-water ratios resulted in a larger contact angle and thus less wettability for the fabricated scaffold, while scaffolds fabricated from higher concentrations of P(PF-co-CL) or high dioxane-water ratios had better biomineralization after soaking in simulated body fluid. In vitro cell viability testing showed the scaffolds had good biocompatibility with both bone and nerve cells. The results indicate that the polymer concentration and solvents ratio significantly affect the formation of porous structures, and optimum processing parameters were found to be 8% polymer concentration and 22% to 24% water content. These porous P(PF-co-CL) scaffolds fabricated via TIPS may be useful in various tissue engineering applications © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 226-235, 2017.
Assuntos
Teste de Materiais , Neurônios/metabolismo , Osteoblastos/metabolismo , Poliésteres/química , Alicerces Teciduais/química , Animais , Camundongos , Neurônios/citologia , Osteoblastos/citologia , Células PC12 , Porosidade , RatosRESUMO
Healing of nerve injuries is a critical medical issue. Biodegradable polymeric conduits are a promising therapeutic solution to provide guidance for axon growth in a given space, thus helping nerve heal. Extensive studies in the past decade reported that conductive materials could effectively increase neurite and axon extension in vitro and nerve regeneration in vivo. In this study, graphene oxide and carbon nanotubes were covalently functionalized with double bonds to obtain crosslinkable graphene oxide acrylate (GOa) sheets and carbon nanotube poly(ethylene glycol) acrylate (CNTpega). An electrically conductive reduced GOa-CNTpega-oligo(polyethylene glycol fumarate) (OPF) hydrogel (rGOa-CNTpega-OPF) was successfully fabricated by chemically crosslinking GOa sheets and CNTpega with OPF chains followed by in situ chemical reduction in l-ascorbic acid solution. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) imaging showed homogenous distribution of GOa/CNTpega carbon content in the rGOa-CNTpega-OPF composite hydrogel, resulting in a significant increase of electrical conductivity compared with neutral OPF without carbon content. Cell studies showed excellent biocompatibility and distinguished PC12 cell proliferation and spreading on the rGOa-CNTpega-OPF composite hydrogel. Fluorescent microscopy imaging demonstrated robustly stimulated neurite development in these cells on a conductive rGOa-CNTpega-OPF composite hydrogel compared with that on neutral OPF hydrogels. These results illustrated a promising potential for the rGOa-CNTpega-OPF composite hydrogel to serve as conduits for neural tissue engineering.
RESUMO
Three-dimensional (3-D) scaffolds with intrinsic porous structures are desirable in various tissue regeneration applications. In this study, a unique method that combines thermally induced phase separation with a photocrosslinking process was developed for the fabrication of 3-D crosslinked polymer scaffolds with densely interconnected porous structures. Biodegradable poly(propylene fumarate)-co-poly(L-lactic acid) with crosslinkable fumarate bonds were used as the structural polymer material and a dioxane/water binary system was applied for the phase separation. By altering the polymer composition (9, 5 and 3 wt%), different types of scaffolds with distinct morphology, mechanical strength, degradation rate, cell growth and morphology, and extracellular matrix production were fabricated. These crosslinked 3-D porous scaffolds with tunable strength and biological responses show promise for potential applications in regenerative therapies, including bone and neural tissue engineering.
RESUMO
Scaffolds with intrinsically interconnected porous structures are highly desirable in tissue engineering and regenerative medicine. In this study, three-dimensional polymer scaffolds with highly interconnected porous structures were fabricated by thermally induced phase separation of novel synthesized biodegradable poly(propylene fumarate)-co-poly(l-lactic acid) in a dioxane/water binary system. Defined porous scaffolds were achieved by optimizing conditions to attain interconnected porous structures. The effect of phase separation parameters on scaffold morphology were investigated, including polymer concentration (1, 3, 5, 7, and 9%), quench time (1, 4, and 8 min), dioxane/water ratio (83/17, 85/15, and 87/13 wt/wt), and freeze temperature (-20, -80, and -196 °C). Interesting pore morphologies were created by adjusting these processing parameters, e.g., flower-shaped (5%; 85/15; 1 min; -80 °C), spherulite-like (5%; 85/15; 8 min; -80 °C), and bead-like (5%; 87/13; 1 min; -80 °C) morphology. Modulation of phase separation conditions also resulted in remarkable differences in scaffold porosities (81% to 91%) and thermal properties. Furthermore, scaffolds with varied mechanic strengths, degradation rates, and protein adsorption capabilities could be fabricated using the phase separation method. In summary, this work provides an effective route to generate multi-dimensional porous scaffolds that can be applied to a variety of hydrophobic polymers and copolymers. The generated scaffolds could potentially be useful for various tissue engineering applications including bone tissue engineering.
RESUMO
Biodegradable micelle systems with both extracellular stabilities and specific targeting properties are highly desirable for anti-cancer drug delivery. Here, we report a biodegradable and crosslinkable poly(propylene fumarate)-co-poly(lactide-co-glycolide)-co-poly(ethylene glycol) (PPF-PLGA-PEG) copolymer conjugated with folate (FA) molecules for receptor-mediated delivery of doxorubicin. Micelles with folate ligands on surface and fumarate bonds within the core were self-assembled and crosslinked, which exhibited better stability against potential physiological conditions during and after drug administration. A pH sensitive drug release profile was observed showing robust release at acidic environment due to the ester hydrolysis of PLGA (50:50). Further, micelles with folate ligands on surface showed strong targeting ability and therapeutic efficacy through receptor-mediated endocytosis, as evidenced by efficacious cancer killing and fatal DNA damage. These results imply promising potential for ligand-conjugated core crosslinked PPF-PLGA-PEG-FA micelles as carrier system for targeted anti-cancer drug delivery.