Enhancing the Performance of Perovskite Solar Cells via the Functional Group Synergistic Effect in Interfacial Passivation Materials.

Interfacial defects are considered to be a stumbling block in producing highly efficient perovskite solar cells (PSCs), so a more reasonable design is required for interfacial passivation materials (IPMs) to achieve further improvements in PSC performance. Here, we use fluorine atom (-F) and methoxy (-OCH3) functional groups to modify the same molecular fragment, obtaining three kinds of IPMs named YZ-301, YZ-302, and YZ-303, respectively. Through the subtle combination of -F and -OCH3, the fragment in YZ-302 exhibits an enhanced electronegativity, rendering the correlative IPM with a stronger interaction with the perovskite layer. As a result, YZ-302 shows the best defect passivation and hole transport effect at the interface, and the PSC based on YZ-302 treatment achieves the best efficiency approaching 24%, which is better than the reference and devices with other IPMs, and it also has excellent device stability.

Combinatorial Biosynthesis of 3-O-Carbamoylmaytansinol by Rational Engineering of the Tailoring Steps of Ansamitocins.

Currently, most maytansine-containing antibody-drug conjugates (ADCs) in clinical trials are prepared with DM1 or DM4, which in turn is synthesized mainly from ansamitocin P-3 (AP-3), a bacterial maytansinoid, isolated from Actinosynnema pretiosum. However, due to the high self-toxicity of AP-3 to A. pretiosum, the yield of AP-3 has been difficult to improve. Herein, a new maytansinoid with much lower self-toxicity to A. pretiosum, 3-O-carbamoylmaytansinol (CAM, 3), was designed and generated by introducing the 3-O-carbamoyltransferase gene asc21b together with the N-methyltransferase genes from exogenous maytansinoid gene clusters into the 3-O-acyltransferase gene (asm19) deleted mutant HGF052. Meanwhile, two new shunt products, 20-O-demethyl-19-dechloro-N-demethyl-4,5-desepoxy-CAM (4) and 20-O-demethyl-N-demethyl-4,5-desepoxy-CAM (5) were identified from the recombinant strain. Furthermore, by screening of liquid fermentation media, overexpression of bottleneck tailoring enzymes and the pathway-specific activator, the titer of CAM reached 498 mg/L in the engineered strain. Since the 3-O-carbamoyl group of CAM can be removed by chemical cleavage as AP-3 to produce maytansinol, our work suggests that CAM may be a promising alternative to AP-3 in the future development of ADCs.

An efficient asymmetric structured hole transport material for perovskite solar cells.

Hole transport materials (HTMs) play a crucial role in achieving efficient perovskite solar cells (PSCs). In this work, an HTM MF-ACD with an asymmetric structure is designed by introducing two different peripheral end groups. The asymmetric feature increases the molecular dipole of MF-ACD, and endows MF-ACD with good stability and film formation properties, higher hole mobility and conductivity. Consequently, the MF-ACD-based PSC shows a high efficiency of 23.1%, which is much higher than that of the symmetric counterpart. The results show that the asymmetric configuration might be a potential choice to develop more efficient HTMs.

A pooling convolution model for multi-classification of ECG and PCG signals.

Electrocardiogram (ECG) and phonocardiogram (PCG) signals are physiological signals generated throughout the cardiac cycle. The application of deep learning techniques to recognize ECG and PCG signals can greatly enhance the efficiency of cardiovascular disease detection. Therefore, we propose a series of straightforward and effective pooling convolutional models for the multi-classification of ECG and PCG signals. Initially, these signals undergo preprocessing. Subsequently, we design various structural blocks, including a stacked block (MCM) comprising convolutional layer and max-pooling layers, along with its variations, as well as a residual block (REC). By adjusting the number of structural blocks, these models can handle ECG and PCG data with different sampling rates. In the final tests, the models utilizing the MCM structural block achieved accuracies of 98.70 and 92.58% on the ECG and PCG fusion datasets, respectively. These accuracies surpass those of all networks utilizing its variations. Moreover, compared to the models employing the REC structural block, the accuracies are improved by 0.02 and 4.30%, respectively. Furthermore, this research has been validated through tests conducted on multiple ECG and PCG datasets, along with comparisons to other published literature. To further validate the generalizability of the model, an additional experiment involving the classification of a synchronized ECG-PCG dataset was conducted. This dataset is divided into seven different levels of fatigue based on the amount of exercise performed by each healthy subject during the testing process. The results indicate that the model using the MCM block also achieved the highest accuracy.

Discovery and Heterologous Production of Tetrapetalones Provide Insights into the Formation of the Tetracyclic System.

Tetrapetalones make up a unique class of pentaketide ansamycins that feature a tetracyclic skeleton and exhibit potent inhibitory activities against soybean lipoxygenase. However, a detailed biosynthetic route to tetrapetalones has not been published. Herein we report the activation of the tetrapetalones' biosynthetic gene cluster (tpt) in Streptomyces sp. S10 by promoter engineering along with constitutive expression of pathway-specific regulator genes, leading to the discovery of seven new derivatives, tetrapetalones E-K (2-8), and the known tetrapetalone A (1). In vivo gene deletion experiments and heterologous expression of the minimized tpt cluster in Streptomyces albus J1074 suggest that the tetracyclic system of tetrapetalones is probably formed spontaneously, and the regioselective glycosylation of tetrapetalones at the C-9 hydroxy group with d-rhamnose or d-rhodinose was catalyzed by the glycosyltransferase Tpt14.

Efficient and Stable Tin-Lead Mixed Perovskite Solar Cells Using Post-Treatment Additive with Synergistic Effects.

Inhibiting the oxidation of Sn2+ during the crystallization process of Sn-Pb mixed perovskite film is found to be as important as the oxidation resistance of precursor solution to achieve high efficiency, but less investigated. Considering the excellent reduction feature of hydroquinone and the hydrophobicity of tert-butyl group, an antioxidant 2,5-di-tert-butylhydroquinone (DBHQ) was introduced into Sn-Pb mixed perovskite films using an anti-solvent approach to solve this problem. Interestingly, we find that DBHQ can act as function alterable additive during its utilization. On the one hand, DBHQ can restrict the oxidation of Sn2+ during the crystallization process, facilitating the fabrication of high-quality perovskite film; on the other hand, the generated oxidation product 2,5-di-tert-butyl-1,4-benzoquinone (DBBQ) can functionalize as defect passivator to inhibit the charge recombination. As a result, this synergetic effect renders the Sn-Pb mixed PSC a power conversion efficiency (PCE) up to 23.0 %, which is significantly higher than the reference device (19.6 %). Furthermore, the unencapsulated DBQH-modified PSCs exhibited excellent long-term stability and thermal stability, with the devices maintaining 84.2 % and 78.9 % of the initial PCEs after aging at 25 °C and 60 °C for 800 h and 120 h under N2 atmosphere, respectively. Therefore, the functional alterable strategy provides a novel cornerstone for high-performance Sn-Pb mixed PSCs.

[A new xanthone from hulls of Garcinia mangostana and its cytotoxic activity].

Eight compounds were isolated from ethyl acetate fraction of 80% ethanol extract of the hulls of Garcinia mangostana by silica gel, Sephadex LH-20 column chromatography, as well as prep-HPLC methods. By HR-ESI-MS, MS, 1D and 2D NMR spectral analyses, the structures of the eight compounds were identified as 16-en mangostenone E(1), α-mangostin(2), 1,7-dihydroxy-2-(3-methy-lbut-2-enyl)-3-methoxyxanthone(3), cratoxyxanthone(4), 2,6-dimethoxy-para-benzoquinone(5), methyl orselinate(6), ficusol(7), and 4-(4-carboxy-2-methoxyphenoxy)-3,5-dimethoxybenzoic acid(8). Compound 1 was a new xanthone, and compound 4 was a xanthone dimer, compound 5 was a naphthoquinone. All compounds were isolated from this plant for the first time except compounds 2 and 3. Cytotoxic bioassay suggested that compounds 1, 2 and 4 possessed moderate cytotoxicity, suppressing HeLa cell line with IC_(50) va-lues of 24.3, 35.5 and 17.1 µmol·L~(-1), respectively. Compound 4 also could suppress K562 cells with an IC_(50) value of 39.8 µmol·L~(-1).

Follistatin (FST) is expressed in buffalo (Bubalus bubalis) ovarian follicles and promotes oocyte maturation and early embryonic development.

Follistatin (FST), a member of the transforming growth factor-ß (TGF-ß) superfamily, has been identified as an inhibitor of follicle-stimulating hormone. Previous studies showed that it plays an important role in animal reproduction. Therefore, this study aims to investigate its effect on the maturation of buffalo oocytes in vitro, and the underlying mechanism of FST affecting oocyte maturation was also explored in buffalo cumulus cells. Results showed that FST was enriched in the ovary and expressed at different stages of buffalo ovarian follicles as well as during oocyte maturation and early embryo development. The FST expression level was up-regulated in MII buffalo oocytes compared with the GV stage (p < .05). To study the effects of FST on buffalo oocytes' maturation and early embryonic development, we added the pcD3.1 skeleton vector and PCD3.1-EGFP-FST vector into the maturation fluid of buffalo oocytes, respectively. It was demonstrated that FST promoted the in vitro maturation rate of buffalo oocytes and the blastocyst rate of embryos cultured in vitro (p < .05). By interfering with FST expression, we discovered that FST in cumulus cells plays a crucial role in oocyte maturation. Interference with the FST expression during the buffalo oocyte maturation did not affect the first polar body rate of buffalo oocyte (p > .05). In contrast, the location of mitochondria in oocytes was abnormal, and the cumulus expansion area was reduced (p < .05). After parthenogenetic activation, the cleavage and blastocyst rates of the FST-interfered group were reduced (p < .05). Furthermore, RT-qPCR was performed to investigate further the underlying mechanism by which FST enhances oocyte maturation. We found that overexpression of FST could up-regulate the expression level of apoptosis suppressor gene Bcl-2 and TGF-ß/SMAD pathway-related genes TGF-ß, SMAD2, and SMAD3 (p < .05). In contrast, the expression levels of SMAD4 and pro-apoptotic gene BAX were significantly decreased (p < .05). The FST gene could affect buffalo oocyte maturation by regulating the oocyte mitochondria integrity, the cumulus expansion, cumulus cell apoptosis, and the expression levels of TGF-ß/SMAD pathway-related genes.

Asymmetric Small Molecule as Interface "Governor" for FAPbI3 Perovskite Solar Cells.

Delicate interface modification is necessary for improving the photovoltaic performance of a perovskite solar cell (PSC). Herein, two asymmetric small molecules, termed BTD-DA and BTD-PA are designed and synthesized to govern the perovskite/Spiro-OMeTAD interface. The molecule BTD-PA featuring a donor-acceptor-acceptor (D-A-A') configuration shows a larger molecule dipole and a better effect on defect passivation and energy level regulation through the strong interaction between the pyridine group in BTD-PA and the surficial uncoordinated Pb2+. Consequently, the PSCs based on the BTD-PA treatment harvest a champion power conversion efficiency (PCE) of 24.46% for a 0.09 cm2 active area and 22.46% for the 1 cm2 device. Moreover, the long-term stability of FAPbI3 PSCs is also significantly improved because of the enhanced hydrophobicity and the inhibited phase transition of the FAPbI3 film with BTD-PA treatment. Our research provides a new strategy for interfacial engineering to boost the PCE and stability of the FAPbI3 PSCs.

Double Bond Geometric Isomers of Pentaketide Ansamycins from Streptomyces sp. S008.

Six new pentaketide ansamycins, namely, shengliangmycins A-F (1-6, respectively), were obtained from the fermentation products of Streptomyces sp. S008OEslmR2 that was derived by constitutive expression of LAL regulator gene slmR2. The structures of 1-6 were determined through comprehensive spectroscopic analysis and single-crystal X-ray diffraction. Compound 1 has a cis-C6═C7 bond, which is different from that of compounds 2-5. Compounds 3-6 feature a morpholinone structural moiety, whereas 5 is characterized by a pyrazoline ring, which is rare in natural products.

Deciphering the Timing of Naphthalenic Ring Formation in the Biosynthesis of 8-Deoxyrifamycins.

Although the biosynthesis of rifamycin has been studied for three decades, the biosynthetic formation of the naphthalenic ring remains unclear. In this study, by deletion of all post-PKS modification genes, we identified macrolactam precursors released from rif PKS. Isolated prorifamycins (M3 and M4) have a benzenic chromophore and exist in two sets of macrocyclic atropisomers. The transformation from prorifamycins to benzenoid (5) and naphthalenoid (6) was suggested to be a non-enzymatic process, which is an off-PKS assembly.

Lysohexaenetides A and B, linear lipopeptides from Lysobacter sp. DSM 3655 identified by heterologous expression in Streptomyces.

Lysobacter harbors a plethora of cryptic biosynthetic gene clusters (BGCs), albeit only a limited number have been analyzed to date. In this study, we described the activation of a cryptic polyketide synthase (PKS)/nonribosomal peptide synthetase (NRPS) gene cluster (lsh) in Lysobacter sp. DSM 3655 through promoter engineering and heterologous expression in Streptomyces sp. S001. As a result of this methodology, we were able to isolate two novel linear lipopeptides, lysohexaenetides A (1) and B (2), from the recombinant strain S001-lsh. Furthermore, we proposed the biosynthetic pathway for lysohexaenetides and identified LshA as another example of entirely iterative bacterial PKSs. This study highlights the potential of heterologous expression systems in uncovering cryptic biosynthetic pathways in Lysobacter genomes, particularly in the absence of genetic manipulation tools.

[Chemical constituents from Salacia polysperma].

Nine compounds were isolated from the 90% ethanol extract of Salacia polysperma by silica gel, Sephadex LH-20 column chromatography, together with preparative HPLC methods. Based on HR-ESI-MS, MS, 1D and 2D NMR spectral analyses, the structures of the nine compounds were identified as 28-hydroxy wilforlide B(1), wilforlide A(2), 1ß,3ß-dihydroxyurs-9(11),12-diene(3),(-)-epicatechin(4),(+)-catechin(5),(-)-4'-O-methyl-ent-galloepicatechin(6), 3-hydroxy-1-(4-hydroxy-3-methoxy-phenyl)propan-1-one(7),(-)-(7S,8R)-4-hydroxy-3,3',5'-trimethoxy-8',9'-dinor-8,4'-oxyneoligna-7,9-diol-7'-aldehyde(8), and vanillic acid(9). Compound 1 is a new oleanane-type triterpene lactone. Compounds 1, 3, 4, 7-9 were isolated from the Salacia genus for the first time. All compounds were assayed for their α-glucosidase inhibitory activity. The results suggested that compound 8 exhibited moderate α-glucosidase inhibitory activity, with an IC_(50) value of 37.2 µmol·L~(-1), and the other compounds showed no α-glucosidase inhibitory activity.

Identification and Characterization of the 28-N-Methyltransferase Involved in HSAF Analogue Biosynthesis.

Polycyclic tetramate macrolactams (PoTeMs) are a family of structurally intriguing bioactive natural products. Although the presence of the N-28 methyl group is known to affect bioactivities of some PoTeMs, the mechanism for this methylation remains unclear. We report here the identification and characterization of the 28-N-methyltransferase for HSAF analogues, which is encoded by a gene located outside the HSAF (heat-stable antifungal factor) cluster in Lysobacter enzymogenes C3. Our data suggested that 28-N-methyltransferase utilizes S-adenosylmethionine (SAM) to methylate HSAF analogues, and acts after the dicyclic and tricyclic ring formation and prior to C-3 hydroxylation. Kinetic analysis showed that the optimal substrate for the enzyme is 3-dehydroxy HSAF (3-deOH HSAF). Moreover, it could also accept PoTeMs bearing a 5-6 or 5-6-5 polycyclic system as substrates. This is the first N-methyltransferase identified in the family of PoTeMs, and the identification of this enzyme provides a new tool to generate new PoTeMs as antibiotic lead compounds.

Discovery of Oxidized Polycyclic Tetramate Macrolactams Bearing One or Two Rings through Combinatorial Pathway Reassembly.

The structural diversity of polycyclic tetramate macrolactams (PoTeMs) are mainly generated by the cyclases and cytochrome P450s (CYPs). The PoTeM cluster sah in Saccharopolyspora hirsuta harboring two CYP genes was combinatorially reassembled and heterologously expressed in Streptomyces. As a result, six new cytotoxic PoTeMs, sahamides A-F (1-6), were discovered, and 1-3 are the first examples of oxidized one-ring PoTeMs. Remarkably, SahE represents the first CYP performing oxidative modification on the ornithine moiety of PoTeMs.

Molecular Engineering of Peripheral Substitutions to Construct Efficient Acridine Core-Based Hole Transport Materials for Perovskite Solar Cells.

The development of highly efficient hole transport materials (HTMs) for perovskite solar cells (PSCs) has been a hot research topic. Acridine and its derivatives are gradually utilized as new blocks for optoelectronic applications, which stems from its rigid conjugated structure, shedding a new light on this old molecule. Meanwhile, its application in PSCs as a HTM has not been well explored, and the efficiency of 9,10-dihydroacridine (ACR)-based HTMs is relatively low. In this work, we conduct a systematic modulation of the peripheral substituents for ACR core building block-based HTMs and investigate the effects of the electron-donating ability and π-conjugation of peripheral groups on the photovoltaic performance of the corresponding HTMs. It is found that the peripheral groups with a weaker electron-donating ability and stronger π-conjugation are more suitable for the acridine core, which itself has a stronger electron-donating ability. Through molecular engineering, the newly developed HTM ACR-PhDM achieves an impressive power conversion efficiency of 23.5%. Our work lays the foundation for the design and development of efficient HTMs in the future.

Research on Computer-Aided Diagnosis Method Based on Symptom Filtering and Weighted Network.

In the process of disease identification, as the number of diseases increases, the collection of both diseases and symptoms becomes larger. However, existing computer-aided diagnosis systems do not completely solve the dimensional disaster caused by the increasing data set. To address the above problems, we propose methods of using symptom filtering and a weighted network with the goal of deeper processing of the collected symptom information. Symptom filtering is similar to a filter in signal transmission, which can filter the collected symptom information, further reduce the dimensional space of the system, and make the important symptoms more prominent. The weighted network, on the other hand, mines deeper disease information by modeling the channels of symptom information, amplifying important information, and suppressing unimportant information. Compared with existing hierarchical reinforcement learning models, the feature extraction methods proposed in this paper can help existing models improve their accuracy by more than 10%.

Bi(trifluoromethyl) Benzoic Acid-Assisted Shallow Defect Passivation for Perovskite Solar Cells with an Efficiency Exceeding 21.

Chemical additive engineering is reported to be a simple yet effective approach to passivate shallow defects at the surface and grain boundaries, restrict nonradiative recombination losses, and further enhance the power conversion efficiency (PCE) and stability of perovskite solar cells (PSCs). Herein, we successfully introduce a small organic molecule 3,5-bis(trifluoromethyl)benzoic acid (6FBzA) into an antisolvent as a shallow defect passivator for perovskite films. The Pb2+ defects at the surface are greatly healed due to the coordination interaction of carbonyl and fluorine groups of 6FBzA with Pb2+. Consequently, the trap-assisted nonradiative recombination is effectively suppressed, as well as the interfacial charge extraction and transfer is significantly enhanced. As a result, the 6FBzA-treated PSC obtains a champion PCE of 21.09% with negligible hysteresis, which is obviously superior to the reference device (18.45%). Furthermore, on account of the high hydrophobicity of 6FBzA, the unencapsulated 6FBzA-treated device exhibits a good long-term stability, maintaining 82% of its initial PCE at a relative humidity of 30-40% in ambient air after 1800 h of aging.

Granulosa cells affect in vitro maturation and subsequent parthenogenetic development of buffalo (Bubalus bubalis) oocytes.

Granulosa cells (GCs) play a crucial role in follicular development and atresia. Previous studies have showed that GCs in the form of monolayer influenced in vitro maturation (IVM) of oocytes. However, the effects of GCs in the form of conditioned medium and monolayer on IVM and development competence of buffalo oocytes remain unclear. In the present study, we examined the impacts of GC-conditioned medium (GCCM) and monolayer GC on maturation efficiency and embryo development of buffalo oocytes after parthenogenetic activation (PA). Our results showed that GCCM that was collected on day 2 and added to IVM medium at a 20% proportional level (2 days and 20%) exerted significant negative effects on IVM rate (41.6% vs. 44.5%), but significantly enhanced embryo development (oocyte cleavage, 81.3% vs. 69.3%; blastocyst formation, 36.3% vs. 29.3%) of buffalo oocytes after PA compared with the control group. Furthermore, monolayer GC significantly reduced both maturation efficiency (40.2% vs. 44.5%) and embryo development (oocyte cleavage, 60.6% vs. 69.3%; blastocyst formation, 20.6% vs. 29.3%) of buffalo oocytes after PA compared to the control group. Our study indicated that GCs in the form of GCCM (2 days and 20%) and monolayer GC had different effects on IVM and subsequent parthenogenetic development of buffalo oocytes.

Bio-Inspired Aramid Fibers@silica Binary Synergistic Aerogels with High Thermal Insulation and Fire-Retardant Performance.

Flame-retardant, thermal insulation, mechanically robust, and comprehensive protection against extreme environmental threats aerogels are highly desirable for protective equipment. Herein, inspired by the core (organic)-shell (inorganic) structure of lobster antenna, fire-retardant and mechanically robust aramid fibers@silica nanocomposite aerogels with core-shell structures are fabricated via the sol-gel-film transformation and chemical vapor deposition process. The thickness of silica coating can be well-defined and controlled by the CVD time. Aramid fibers@silica nanocomposite aerogels show high heat resistance (530 °C), low thermal conductivity of 0.030 W·m-1·K-1, high tensile strength of 7.5 MPa and good flexibility. More importantly, aramid fibers@silica aerogels have high flame retardancy with limiting oxygen index 36.5. In addition, this material fabricated by the simple preparation process is believed to have potential application value in the field of aerospace or high-temperature thermal protection.