Capacitive-Controlled Prussian White with a Nickel Iron Hexacyanoferrate Composite Cathode for Rapid Sodium Diffusion.

Prussian blue analogues receive tremendous attention owing to their spacious three-dimensional skeleton, high theoretical specific capacity, facile synthesis procedure, and high cost-effectiveness as among the most promising candidates for cathode materials in sodium-ion batteries (SIBs). Nonetheless, the practical specific capacity, especially under high current, is particularly frail due to the sluggish ion diffusion. In this study, the strategy of Ni substitution and formation of water-coordinated Fe is applied to lower the crystal field energy and elevate the active low-spin (LS) Fe content, which leads to a capacitive sodium storage mechanism, resulting in a substantial specific capacity under high current density. The delivered specific capacity of PW-325@2NiFe-55 is 95 mAh g-1 at 50 C, which is 72.5% capacity retention of the one at 0.5 C. Also, it maintains 80.2% of its initial specific capacity after 500 cycles at 5 C. Furthermore, a hypothesis of a joint diffusion-controlled and capacitive mechanism for high-spin (HS) Fe and a mere capacitive mechanism for LS Fe is put forward and verified through potentiastatic tests, operando 57Fe Mössbauer spectroscopy, and ex situ XRD, which provides a new horizon to enhance the electrochemical performance for SIBs.

Highly Active and Sintering-Resistant Pt Clusters Supported on FeOx-Hydroxyapatite Achieved by Tailoring Strong Metal-Support Interactions.

The catalytic performance of supported metal catalysts is closely related to their structure. While Pt-based catalysts are widely used in many catalytic reactions because of their exceptional intrinsic activity, they tend to deactivate in high-temperature reactions, requiring a tedious and expensive regeneration process. The strong metal-support interaction (SMSI) is a promising strategy to improve the stability of supported metal nanoparticles, but often at the price of the activity due to either the coverage of the active sites by support overlay and/or the too-strong metal-support bonding. Herein, we newly constructed a supported Pt cluster catalyst by introducing FeOx into hydroxyapatite (HAP) support to fine-tune the SMSIs. The catalyst exhibited not only high catalytic activity but also sintering resistance, without deactivation in a 100 h test for catalytic CO oxidation. Detailed characterizations reveal that FeOx introduced into HAP weaken the strong covalent metal-support interaction (CMSI) between Pt and FeOx while simultaneously inhibiting the oxidative strong metal-support interaction (OMSI) between Pt and HAP, giving rise to both high activity and thermal stability of the supported Pt clusters.

[Clinical comparative study on resection and non-resection of the fifth metatarsal to rheumatoid forefoot deformity].

OBJECTIVE: To explore clinical effect of the fifth metatarsal head excision and non-excision in rheumatoid arthritis (RA) forefoot deformity reconstruction. METHODS: Retrospective analysis was performed on 50 patients (76 feet) with moderate to severe forefoot deformity caused by RA treated from May 2015 to January 2019. According to degeneration of the fifth metatarsophalangeal joint,the fifth metatarsal head was retained or excised by wind-like forefoot reconstruction,and divided into the fifth metatarsal head preservation group (preservation group) and the fifth metatarsal head resection group (resection group). Twenty-four female patients in preservation group,aged from 47 to 81 years old with an average of (60.37±8.60) years old;the course of disease ranged from 13 to 22 years with an average of (19.00±3.06) years;body mass index (BMI) ranged from 21 to 28 kg·m-2 with an average of (23.53±2.47) kg·m-2;six patients (6 feet) with moderate hallux valgus deformity and 18 patients (30 feet) with severe hallux valgus deformity;treated with the first metatarsophalangeal joint fusion combined with the second th the fourth metatarsophalangeal joint arthroplasty and the fifth metatarsophalangeal joint cleanup. Twenty-six female patients in resection group were female,aged from 30 to 80 years old with an average of (58.53±13.70) years old;the course of disease ranged from 8 to 25 years with an average of (17.94±3.92) years;BMI raged from 20 to 28 kg·m-2 with an average of (24.60±2.03) kg·m-2;4 patients (4 feet) with moderate bunion valgus deformity and 22 patients (36 feet) with severe bunion valgus deformity;treated by the first metatarsophalangeal joint fusion combined with the second th the fifth metatarsophalangeal joint resection of the metatarsophalangeal head. Operation time and postoperative complications between two groups were observed,hallux valgus angle (HVA),intermetatarsal angles between the first and the second metatarsals (IMAFS),intermetatarsal angles between the first and fifth metatarsals (IMAFF),Japanese Society for Surgery of Foot (JSSF) score before surgery and at the latest follow-up were compared. RESULTS: Fifty patients were followed-up from 14 to 46(25.30±8.83) months in resection group and 12 to 48 with an average of (24.30±11.12) months in preservation group,while no significant difference between two groups (P>0.05). There were no significant difference in operation time and postoperative complications between two groups (P>0.05). JSSF scores,HVA,IMAFS and IMAFF in fesection group were improved from (45.09±3.35) points,(38.90±13.67) °,(12.88±1.72) °,(32.50±2.99) ° before operation to (81.60±3.27) points,(15.40±0.90),(9.06±2.27) °,(22.20±1.98) ° at the latest follow-up (P<0.05);preservation group were improved from (47.09±3.96) points,(43.30±12.65) °,(13.99±3.13) °,(33.20±6.14) ° to (83.10±3.66) points,(15.20±1.54) °,(8.99±1.02) °,(24.70±1.88) °,respectively. There were no significant difference in JSSF score,HVA,IMAFS and IMAFF between two groups before operation and the latest follow-up (P>0.05). At the latest follow-up,there were statistically significant differences in pain and deformity in JSSF scores between two groups (P<0.05). CONCLUSION: Both rheumatoid anterior foot reconstruction and anterior foot reconstruction fifth metatarsophalangeal joint debridement showed significant improvement in clinical efficacy and imaging results. Compared with rheumatoid prefoot reconstruction,the fifth metatarsophalangeal joint reconstruction for the treatment of moderate and severe deformity of rheumatoid prefoot showed better improvement in pain,but worse improvement in deformity. For the moderate to severe deformity of the forefoot caused by rheumatoid disease,patients with mild to moderate degenerative deformity of the articular surface of the fifth metatarsal phalanges may be considered for use.

Potential novel Colpodella spp. (phylum Apicomplexa) and high prevalence of Colpodella spp. in goat-attached Haemaphysalis longicornis ticks in Shandong province, China.

Tick-borne Apicomplexan parasites pose a significant threat to both public health and animal husbandry. Identifying potential pathogenic parasites and gathering their epidemiological data are essential for prospectively preventing and controlling infections. In the present study, genomic DNA of ticks collected from two goat flocks (Goatflock1 and Goatflock2) and one dog group (Doggroup) were extracted and the 18S rRNA gene of Babesia/Theileria/Colpodella spp. was amplified by PCR and sequenced. Phylogenetic analysis was conducted based on the obtained sequences. The differences in pathogen positive rates between ticks of different groups were statistically analyzed using the Chi-square or continuity-adjusted Chi-square test. As a result, two pathogenic Theileria (T.) luwenshuni genotypes, one novel pathogenic Colpodella sp. HLJ genotype, and two potential novel Colpodella spp. (referred to as Colpodella sp. struthionis and Colpodella sp. yiyuansis in this study) were identified in the Haemaphysalis (H.) longicornis ticks. Ticks of Goatflock2 had a significantly higher positive rate of Colpodella spp. than those from Goatflock1 (χ2=92.10; P = 8.2 × 10-22) and Doggroup (χ2=42.34; P = 7.7 × 10-11), and a significantly higher positive rate of T. luwenshuni than Doggroup (χ2=5.38; P = 0.02). However, the positive rates of T. luwenshuni between Goatflock1 and Goatflock2 were not significantly different (χ2=2.02; P = 0.16), and so as the positive rates of both pathogens between Goatflock1 and Doggroup groups (P > 0.05). For either Colpodella spp. or T. luwenshuni, no significant difference was found in prevalence between male and female ticks. These findings underscore the potential importance of Colpodella spp. in domestic animal-attached ticks, as our study revealed two novel Colpodella spp. and identified Colpodella spp. in H. longicornis for the first time. The study also sheds light on goats' potential roles in the transmission of Colpodella spp. to ticks and provides crucial epidemiological data of pathogenic Theileria and Colpodella. These data may help physicians, veterinarians, and public health officers prepare suitable detection and treatment methods and develop prevention and control strategies.

Time series models in prediction of severe fever with thrombocytopenia syndrome cases in Shandong province, China.

Severe fever with thrombocytopenia syndrome (SFTS) is an emerging infectious disease caused by the SFTS virus (SFTSV). Predicting the incidence of this disease in advance is crucial for policymakers to develop prevention and control strategies. In this study, we utilized historical incidence data of SFTS (2013-2020) in Shandong Province, China to establish three univariate prediction models based on two time-series forecasting algorithms Autoregressive Integrated Moving Average (ARIMA) and Prophet, as well as a special type of recurrent neural network Long Short-Term Memory (LSTM) algorithm. We then evaluated and compared the performance of these models. All three models demonstrated good predictive capabilities for SFTS cases, with the predicted results closely aligning with the actual cases. Among the models, the LSTM model exhibited the best fitting and prediction performance. It achieved the lowest values for mean absolute error (MAE), mean square error (MSE), and root mean square error (RMSE). The number of SFTS cases in the subsequent 5 years in this area were also generated using this model. The LSTM model, being simple and practical, provides valuable information and data for assessing the potential risk of SFTS in advance. This information is crucial for the development of early warning systems and the formulation of effective prevention and control measures for SFTS.

Decoration of Gold and Platinum Nanoparticle Catalysts by 1 nm Thick Metal Oxide Overlayer and Its Effect on the CO Oxidation Activity.

Exfoliated M-Al layered double hydroxide (M-Al LDH; M = Mg, Co, Ni, and Zn) nanosheets were adsorbed on Au/SiO2 and calcined to transform LDH into mixed metal oxides (MMOs) and yield Au/SiO2 coated with a thin MMO overlayer. These catalysts showed a higher catalytic activity than pristine Au/SiO2. In particular, the 50% CO conversion temperature decreased by more than 250 °C for Co-Al MMO-coated Au/SiO2. In contrast, the deposition of CoAlOx on Au/SiO2 by impregnation or the deposition of Au on Co-Al MMO-coated SiO2 resulted in a worse catalytic activity. Moreover, the presence of a thick MMO overlayer decreased the catalytic activity, suggesting that the control of the overlayer thickness to less than 1 nm is a requisite for obtaining a high catalytic activity. Moreover, the thin Co-Al MMO overlayer on Au/SiO2 possessed abundant oxygen vacancies, which would play an important role in O2 activation, resulting in a highly active interface between Au and the defect-rich MMO on the Au NP surface. Finally, this can be applied to Pt/SiO2, and the obtained Co-Al MMO-coated Pt/SiO2 also exhibited a much improved catalytic activity for CO oxidation.

Co-encapsulation of curcumin and anthocyanins in bovine serum album-fucoidan nanocomplex with a two-step pH-driven method.

BACKGROUND: Curcumin (CUR) and anthocyanins (ACN) are recommended due to their bioactivities. However, their nutritional values and health benefits are limited by their low oral bioavailability. The incorporation of bioactive substances into polysaccharide-protein composite nanoparticles is an effective way to enhance their bioavailability. Accordingly, this study explored the fabrication of bovine serum albumin (BSA)-fucoidan (FUC) hybrid nanoparticles using a two-step pH-driven method for the delivery of CUR and ACN. RESULTS: Under a 1:1 weight ratio of BSA to FUC, the point of zero charge moved from pH ⁓ 4.7 for BSA to around 2.5 for FUC-coated BSA, and the formation of BSA-FUC nanocomplex was pH-dependent by showing the maximum CUR emission wavelength shifting from 546 nm (CUR-loaded BSA-FUC at pH 4.7) and 544 nm (CUR/ACN-loaded BSA-FUC nanoparticles at pH 4.7) to 540 nm (CUR-loaded BSA-FUC at pH 6.0) and 539 nm (CUR/ACN-loaded BSA-FUC nanoparticles at pH 6.0). Elevated concentrations of NaCl from 0 to 2.5 mol L-1 caused particle size increase from about 250 to about 800 nm, but showing no effect on the encapsulation efficiency of CUR. The CUR and ACN entrapped, respectively, in the inner and outer regions of the BSA-FUC nanocomplex were released at different rates. After incubation for 10 h, more than 80% of ACN was released, while less than 25% of CUR diffused into the receiving medium, which fitted well to Logistic and Weibull models. CONCLUSION: In summary, the BSA-FUC nanocomposites produced by a two-step pH-driven method could be used for the co-delivery of hydrophilic and hydrophobic nutraceuticals. © 2023 Society of Chemical Industry.

Defect-Engineering-Mediated Long-Lived Charge-Transfer Excited-State in Fe-Gallate Complex Improves Iron Cycle and Enables Sustainable Fenton-Like Reaction.

Fenton reactions are inefficient because the Fe(II) catalyst cannot be recycled in time due to the lack of a rapid electron transport pathway. This results in huge H2 O2 wastage in industrial applications. Here, it is shown that a sustainable heterogeneous Fenton system is attainable by enhancing the ligand-to-metal charge-transfer (LMCT) excited-state lifetime in Fe-gallate complex. By engineering oxygen defects in the complex, the lifetime is improved from 10-90 ps. The lengthened lifetime ensures sufficient concentrations of excited-states for an efficient Fe cycle, realizing previously unattainable H2 O2 activation kinetics and hydroxyl radical (• OH) productivity. Spectroscopic and electrochemical studies show the cyclic reaction mechanism involves in situ Fe(II) regeneration and synchronous supply of oxygen atoms from water to recover dissociated Fe─O bonds. Trace amounts of this catalyst effectively destroy two drug-resistant bacteria even after eight reaction cycles. This work reveals the link among LMCT excited-state lifetime, Fe cycle, and catalytic activity and stability, with implications for de novo design of efficient and sustainable Fenton-like processes.

A community study of neutralizing antibodies against SARS-CoV-2 in China.

Background: The immune background of the overall population before and after the outbreak of SARS-CoV-2 in China remains unexplored. And the level of neutralizing antibodies is a reliable indicator of individual immunity. Objectives: This study aimed to assess the immune levels of different population groups during a viral outbreak and identify the factors influencing these levels. Methods: We measured the levels of neutralizing antibodies in 12,137 participants using the COVID19 Neutralizing Antibody Detection kit. The dynamics of neutralizing antibodies were analyzed using a generalized additive model, while a generalized linear model and multi-factor analysis of variance were employed to investigate the influencing factors. Additionally, statistical methods were used to compare neutralizing antibody levels among subgroups of the real-world population. Results: Participants who received booster doses exhibited significantly higher levels of neutralizing antibodies compared to those who received only one or two doses (p<0.001). Both elderly [22.55 (5.12, 62.03) IU/mL, 55%] and minors [21.41 (8.15, 45.06) IU/mL, 56%] showed lower positivity rates and neutralizing antibody levels compared to young adults [29.30 (9.82, 188.08) IU/mL, 62%] (p<0.001). Furthermore, the HIV-positive group demonstrated a slightly lower seropositivity rate compared to the healthy group across the three vaccination time points. Notably, three months after the large-scale infection, both the neutralizing antibody level and positivity rate in real-world populations were higher than the previous record [300 (300, 300) IU/mL, 89%; 27.10 (8.77, 139.28) IU/mL, 60%], and this difference was statistically significant. Conclusions: Increasing vaccine dosage enhances neutralizing antibody levels, resulting in greater and longer-lasting immunity. Monitoring immune levels in older individuals and those with AIDS is crucial. Additionally, the neutralizing antibodies generated from vaccination have not yet reached the threshold for achieving herd immunity, while individuals exhibit higher immune levels following a large-scale infection. These findings provide valuable insights for guiding new strategies in vaccine administration.

Operando Mössbauer Spectroscopic Tracking the Metastable State of Atomically Dispersed Tin in Copper Oxide for Selective CO2 Electroreduction.

Metastable state is the most active catalyst state that dictates the overall catalytic performance and rules of catalytic behaviors; however, identification and stabilization of the metastable state of catalyst are still highly challenging due to the continuous evolution of catalytic sites during the reaction process. In this work, operando 119Sn Mössbauer measurements and theoretical simulations were performed to track and identify the metastable state of single-atom Sn in copper oxide (Sn1-CuO) for highly selective CO2 electroreduction to CO. A maximum CO Faradaic efficiency of around 98% at -0.8 V (vs. RHE) over Sn1-CuO was achieved at an optimized Sn loading of 5.25 wt. %. Operando Mössbauer spectroscopy clearly identified the dynamic evolution of atomically dispersed Sn4+ sites in the CuO matrix that enabled the in situ transformation of Sn4+-O4-Cu2+ to a metastable state Sn4+-O3-Cu+ under CO2RR conditions. In combination with quasi in situ X-ray photoelectron spectroscopy, operando Raman and attenuated total reflectance surface enhanced infrared absorption spectroscopies, the promoted desorption of *CO over the Sn4+-O3 stabilized adjacent Cu+ site was evidenced. In addition, density functional theory calculations further verified that the in situ construction of Sn4+-O3-Cu+ as the true catalytic site altered the reaction path via modifying the adsorption configuration of the *COOH intermediate, which effectively reduced the reaction free energy required for the hydrogenation of CO2 and the desorption of the *CO, thereby greatly facilitating the CO2-to-CO conversion. This work provides a fundamental insight into the role of single Sn atoms on in situ tuning the electronic structure of Cu-based catalysts, which may pave the way for the development of efficient catalysts for high-selectivity CO2 electroreduction.

[Cross-sectional study on ankle sprain and its related factors in physical education college].

OBJECTIVE: To explore prevalence, risk factors and treatment of ankle sprain of young college student , in order to obtain accurate epidemiological data. METHODS: From March 2019 to May 2019, 552 college students(1 104 sides of anke joints) from Xi'an Physical Education university were enrolled in study according to inclusion and excludion standard, including 309 males and 243 females aged from 16 to 24 years old with an average of (20.9±3.7) years old. Age, gender, and body mass indes(BMI) etc were recorded. Morbidity of acute and chronic ankle sprains of physical students, treatment after the first sprain (cold compress, cast or plaster bracing and medicine), visual analogue scale (VAS) during walking were assessed through ankle sprain questionnaire;Cumberland ankle instability tool (CAIT), Maryland foot score were applied to assess ankle function. Lateral ankle ligament injury was objectively assessed by musculoskeletal ultrasonography. RESULTS: The prevalence of acute ankle sprain(AAS) was 96.20% (531/552), and the incidence of AAS was 59.96% (622/1 104). The prevalence of chronic ankle joint instability(CAI) was 16.85% (93/552), and the incidence of CAI was 8.97% (99/1 104). In the four categories of sports, college student suffered from multiple sprains in performance majors group was 22.20% (14/63), including of aerobicsand dance performance. The incidence of AAS of ball sports was 8.60%(14/163). After the first sprain, most college students(94.4%) were received cold compression, about 60% of them went to hospital;however, only 44.7% students were received standard treatmens(cast or plaster), only 35.3% of them were received hard ankle orthosis. In 552 college students, 44 students were suffered from more than 4 times of ankle sprain, and the total incidence was 7.97% (44/552). Cumberland score was 26.6±2.4, Cumberland score of students sprained ankle joint more than 4 times was (29.2±1.1), suggested it was a risk factor for ankle joint instability. VAS of students sprained ankle joint more than 4 times was higher than that of less than 4 times(P<0.05), Maryland foot score was significantly lower than that of that of <4 times(P<0.05). Musculoskeletal ultrasonography measured the thickness of anterior tibiofibular ligament(ATFL) was (2.41±0.41) mm, and the thickness of calcaneofibular ligament(CFL) was (1.92±0.21) mm, and had no statistical difference(P>0.05). CONCLUSION: Ninty-four percent college students had at least once ankle sprain, ankle sprains were more common in erobics and ball sports. After the first sprain, the proportion of cast or plaster treatment was less than 50%. Sprained ankle joint more than 4 times is a risk factor, and musculoskeletal ultrasonography showed thickening of both ATFL and CFL, while no statstical difference.

Gold/Substituted Hydroxyapatites for Oxidative Esterification: Control of Thin Apatite Layer on Gold Based on Strong Metal-Support Interaction (SMSI) Results in High Activity.

Gold nanoparticles (Au NPs) deposited on various cation- and anion-substituted hydroxyapatites (Au/sHAPs) show oxidative strong metal-support interaction (SMSI), wherein a thin layer of the sHAP covered the surface of the Au NPs by heat treatment in an oxidative atmosphere. Calcination of Au/sHAPs at 300 °C caused a partial SMSI and that at 500 °C gave fully encapsulated Au NPs. We investigated the influence of the substituted ions in sHAP and the degree of the oxidative SMSI on the catalytic performance of Au/sHAPs for oxidative esterification of octanal or 1-octanol with ethanol to obtain ethyl octanoate. The catalytic activity depends on the size of the Au NPs but not on the support used, owing to the similarity of the acid and base properties of sHAPs except for Au/CaFAP. The presence of a large number of acidic sites on CaFAP lowered the product selectivity, but all other sHAPs exhibited similar activity when the Au particle size was almost the same, owing to the similarity of the acid and base properties. Au/sHAPs_O2 with SMSI exhibited higher catalytic activity than Au/sHAPs_H2 without SMSI despite the fact that the number of exposed surface Au atoms was decreased by the SMSI. In addition, the oxidative esterification reaction proceeded even though the Au NPs were fully covered by the sHAP layer when the thickness of the layer was controlled to be less than 1 nm. The substrate can access the surfaces of the Au NPs covered by the thin sHAP layer (<1 nm), and the presence of the sHAP structure in close contact with the Au NPs resulted in significantly higher catalytic activity compared with that for fully exposed Au NPs deposited on the sHAPs. This result suggests that maximizing the contact area between the Au NPs and the sHAP support based on the SMSI enhances the catalytic activity of Au.

Site-specific performance of 68Ga-DOTATATE PET/CT in detecting tumors with ectopic adrenocorticotropic hormone secretion.

Objective: The aim of this study was to assess the detection ability of 68Ga-DOTATATE in pulmonary versus extrapulmonary tumors with ectopic adrenocorticotropic hormone secretion (EAS). Methods: Images of 68Ga-DOTATATE PET/CT from 74 patients with suspected EAS were retrospectively reviewed. EAS tumors were confirmed in 39 patients through surgical resection or biopsy. Image findings were compared with the histopathological results. Results: EAS tumors were pathologically confirmed via surgery or biopsy in 39 patients. Among those 39 patients, 25 were with pulmonary neuroendocrine tumors (NETs), and the remaining 14 were with extrapulmonary NETs. 68Ga-DOTATATE PET/CT correctly identified the tumor in 26 patients, rendering an overall detection rate of 66.7%. On a site-based analysis, 68Ga-DOTATATE PET/CT correctly identified the EAS tumor in 13 of 25 patients with pulmonary NETs, yielding a detection rate of 52%; for the 14 patients with extrapulmonary NETs, 68Ga-DOTATATE PET/CT correctly identified the EAS tumor in 13, yielding a detection rate of 92.9%. The detection rate of 68Ga-DOTATATE was significantly higher in extrapulmonary NETs than in pulmonary NETs (92.9%% vs. 52%, P = 0.013). For the 13 patients with positive pulmonary NETs, the tumor SUVmax ranged from 1.1 to 7.4 with an average SUVmax of 3.1 ± 2.1. For the 13 patients with positive extrapulmonary NETs, the tumor SUVmax ranged from 2.7 to 21.8 with an average SUVmax of 9.9 ± 6.3. The tumor SUVmax was significantly higher in extrapulmonary tumors than pulmonary tumors (P = 0.015). The tumor size was smaller in pulmonary tumors than in extrapulmonary tumors, while the difference was not significant (P = 0.516). Conclusion: 68Ga-DOTATATE showed site-specific difference in detecting tumors with EAS secretion. Specifically, 68Ga-DOTATATE performed better in the extrapulmonary EAS tumors than in pulmonary ones with both higher detection rate and uptake. Combination of anatomic imaging techniques are necessary for the correct diagnosis of pulmonary EAS tumors.

Unraveling the Electronic Structure and Dynamics of the Atomically Dispersed Iron Sites in Electrochemical CO2 Reduction.

Single-atom catalysts with a well-defined metal center open unique opportunities for exploring the catalytically active site and reaction mechanism of chemical reactions. However, understanding of the electronic and structural dynamics of single-atom catalytic centers under reaction conditions is still limited due to the challenge of combining operando techniques that are sensitive to such sites and model single-atom systems. Herein, supported by state-of-the-art operando techniques, we provide an in-depth study of the dynamic structural and electronic evolution during the electrochemical CO2 reduction reaction (CO2RR) of a model catalyst comprising iron only as a high-spin (HS) Fe(III)N4 center in its resting state. Operando 57Fe Mössbauer and X-ray absorption spectroscopies clearly evidence the change from a HS Fe(III)N4 to a HS Fe(II)N4 center with decreasing potential, CO2- or Ar-saturation of the electrolyte, leading to different adsorbates and stability of the HS Fe(II)N4 center. With operando Raman spectroscopy and cyclic voltammetry, we identify that the phthalocyanine (Pc) ligand coordinating the iron cation center undergoes a redox process from Fe(II)Pc to Fe(II)Pc-. Altogether, the HS Fe(II)Pc- species is identified as the catalytic intermediate for CO2RR. Furthermore, theoretical calculations reveal that the electroreduction of the Pc ligand modifies the d-band center of the in situ generated HS Fe(II)Pc- species, resulting in an optimal binding strength to CO2 and thus boosting the catalytic performance of CO2RR. This work provides both experimental and theoretical evidence toward the electronic structural and dynamics of reactive sites in single-Fe-atom materials and shall guide the design of novel efficient catalysts for CO2RR.

Confirming High-Valent Iron as Highly Active Species of Water Oxidation on the Fe, V-Coupled Bimetallic Electrocatalyst: In Situ Analysis of X-ray Absorption and Mössbauer Spectroscopy.

Iron (Fe)-based bimetallic oxides/hydroxides have been widely investigated for promising alkaline electrochemical oxygen evolution reactions (OERs), but it still remains argumentative whether Fe3+ or Fe4+ intermediates are highly active for efficient OER. Here, we rationally designed and prepared one Fe, V-based bimetallic composite nanosheet by employing the OER-inert V element as a promoter to completely avoid the argument of real active metals and using our recently developed one-dimensional conductive nickel phosphide (NP) as a support. The as-obtained hierarchical nanocomposite (denoted as FeVOx/NP) was evaluated as a model catalyst to gain insight into the iron-based species as highly active OER sites by performing in situ X-ray absorption spectroscopy and 57Fe Mössbauer spectroscopy measurements. It was found that the high-valent Fe4+ species can only be detected during the OER process of the FeVOx/NP nanocomposite instead of the iron counterpart itself. Together with the fact that the OER activities of both the vanadium and iron counterparts are by far worse than that of the FeVOx/NP composite, we can confirm that the high-valent Fe4+ formed are the highly active species for efficient OER. As demonstrated by density functional theory simulations, the composite of Fe and V metals is proposed to cause a decreased Gibbs free energy as well as theoretical overpotential of water oxidation with respect to its counterparts, as is responsible for its excellent OER performance with extremely low OER overpotential (290 mV at 500 mA cm-2) and extraordinary stability (1000 h at 100 mA cm-2).

Oxidative-Atmosphere-Induced Strong Metal-Support Interaction and Its Catalytic Application.

ConspectusIn 1978, the classical strong metal-support interaction (C-SMSI) was first explored by observing significantly suppressed H2 and CO adsorption on Group-VIII noble-metal-reducible oxide systems after high-temperature treatment. Subsequent studies showed that local electron redistribution and encapsulation overlayers on metal nanoparticles (NPs) are typical features of SMSI, which endows supported metal heterogeneous catalysts with various advantageous properties for catalytic applications. In recent decades, significant advancements have been made in the utilization of SMSI effects via oxidation, adsorbate mediation, wet-chemistry processes, and so on. Oxidative SMSI (O-SMSI) was first observed by Mou et al. for Au/ZnO, wherein encapsulation overlayers were formed on Au NPs after being treated under oxidative conditions. In this system, positively charged Au NPs are formed through electron transfer from the metal to the support, and Au-O-Zn linkages drive the formation of the encapsulation overlayer. O-SMSI and the behavior it imparts in catalyst systems contradict our previous understanding on C-SMSI with respect to the need for a reducing atmosphere and the known encapsulation driving force. Moreover, O-SMSI encapsulation overlayers show considerable stability in oxidizing atmospheres and provide a potential solution to the problem of high-temperature sintering of supported catalysts. To date, O-SMSI has been observed for catalyst systems with various supports, including metal oxides, phosphides, and nitrides, and provides application opportunities for supported metal catalysts in oxidative catalytic process.In this Account, we first briefly introduce the research background of O-SMSI and the motivation for developing new systems exhibiting this effect. In particular, the Au/hydroxyapatite (HAP, nonoxide) system with O-SMSI induced by applying high-temperature oxidation prevents the sintering of Au NPs. Furthermore, Pt and Pd catalysts exhibit O-SMSI with HAP and ZnO supports under oxidizing heat treatment. Based on the composition and structure of HAP, the tetrahedral units ((PO4)3-) and OH- are shown to be responsible for O-SMSI. Importantly, the local electronic redistribution in the metal NPs (i.e., electron transfer from the metal to support), which is a characteristic feature of O-SMSI, can be controlled to tailor the strength of the metal-support interaction. We used exogenous adsorbents to tune the electronic state (Fermi level) of metal NPs to artificially introduce O-SMSI to Au, Pd, Pt, and Rh catalysts supported on TiO2. Moreover, the findings of our study indicate that O-SMSI can be broadly applied to the development of heterogeneous catalysts. Finally, we summarize some common O-SMSI catalysts with different proposed mechanisms and provide insights into the existing challenges and possible research directions in the field.

Operando Spectroscopic Analysis of Axial Oxygen-Coordinated Single-Sn-Atom Sites for Electrochemical CO2 Reduction.

Sn-based materials have been demonstrated as promising catalysts for the selective electrochemical CO2 reduction reaction (CO2RR). However, the detailed structures of catalytic intermediates and the key surface species remain to be identified. In this work, a series of single-Sn-atom catalysts with well-defined structures is developed as model systems to explore their electrochemical reactivity toward CO2RR. The selectivity and activity of CO2 reduction to formic acid on Sn-single-atom sites are shown to be correlated with Sn(IV)-N4 moieties axially coordinated with oxygen (O-Sn-N4), reaching an optimal HCOOH Faradaic efficiency of 89.4% with a partial current density (jHCOOH) of 74.8 mA·cm-2 at -1.0 V vs reversible hydrogen electrode (RHE). Employing a combination of operando X-ray absorption spectroscopy, attenuated total reflectance surface-enhanced infrared absorption spectroscopy, Raman spectroscopy, and 119Sn Mössbauer spectroscopy, surface-bound bidentate tin carbonate species are captured during CO2RR. Moreover, the electronic and coordination structures of the single-Sn-atom species under reaction conditions are determined. Density functional theory (DFT) calculations further support the preferred formation of Sn-O-CO2 species over the O-Sn-N4 sites, which effectively modulates the adsorption configuration of the reactive intermediates and lowers the energy barrier for the hydrogenation of *OCHO species, as compared to the preferred formation of *COOH species over the Sn-N4 sites, thereby greatly facilitating CO2-to-HCOOH conversion.

Maximizing Active Fe Species in ZSM-5 Zeolite Using Organic-Template-Free Synthesis for Efficient Selective Methane Oxidation.

The selective oxidation of CH4 in the aqueous phase to produce valuable chemicals has attracted considerable attention due to its mild reaction conditions and simple process. As the most widely studied catalyst for this reaction, Fe-ZSM-5 demonstrates high intrinsic activity and selectivity; however, Fe-ZSM-5 prepared using conventional methods has a limited number of active Fe sites, resulting in low CH4 conversion per unit mass of the catalyst. This study reports a facile organic-template-free synthesis strategy that enables the incorporation of more Fe into the zeolite framework with a higher dispersion degree compared to conventional synthesis methods. Because framework Fe incorporated in this way is more readily transformed into isolated extra-framework Fe species under thermal treatment, the overall effect is that Fe-ZSM-5 prepared using this method (Fe-HZ5-TF) has 3 times as many catalytically active sites as conventional Fe-ZSM-5. When used for the selective oxidation of CH4 with 0.5 M H2O2 at 75 °C, Fe-HZ5-TF produced a high C1 oxygenate yield of 109.4 mmol gcat-1 h-1 (a HCOOH selectivity of 91.1%), surpassing other catalysts reported to date. Spectroscopic characterization and density functional theory calculations revealed that the active sites in Fe-HZ5-TF are mononuclear Fe species in the form of [(H2O)3Fe(IV)═O]2+ bound to Al pairs in the zeolite framework. This differs from conventional Fe-ZSM-5, where binuclear Fe acts as the active site. Analysis of the catalyst and product evolution during the reaction suggests a radical-driven pathway to explain CH4 activation at the mononuclear Fe site and subsequent conversion to C1 oxygenates.

Ultrastable Fe-N-C Fuel Cell Electrocatalysts by Eliminating Non-Coordinating Nitrogen and Regulating Coordination Structures at High Temperatures.

Pyrolyzed Fe-N-C materials have attracted considerable interest as one of the most active noble-metal-free electrocatalysts for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFCs). Despite significant progress is made in improving their catalytic activity during past decades, the Fe-N-C catalysts still suffer from fairly poor electrochemical and storage stability, which greatly hurdles their practical application. Here, an effective strategy is developed to greatly improve their catalytic stability in PEMFCs and storage stability by virtue of previously unexplored high-temperature synthetic chemistry between 1100 and 1200 °C. Pyrolysis at this rarely adopted temperature range not only enables the elimination of less active nitrogen-doped carbon sites that generate detrimental peroxide byproduct but also regulates the coordination structure of Fe-N-C from less stable D1 (O-FeN4 C12 ) to a more stable D2 structure (FeN4 C10 ). The optimized Fe-N-C catalyst exhibits excellent stability in PEMFCs (>80% performance retention after 30 h under H2 /O2 condition) and no activity loss after 35 day storage while maintaining a competitive ORR activity and PEMFC performance.

Halogen-Incorporated Sn Catalysts for Selective Electrochemical CO2 Reduction to Formate.

Electrochemically reducing CO2 to valuable fuels or feedstocks is recognized as a promising strategy to simultaneously tackle the crises of fossil fuel shortage and carbon emission. Sn-based catalysts have been widely studied for electrochemical CO2 reduction reaction (CO2 RR) to make formic acid/formate, which unfortunately still suffer from low activity, selectivity and stability. In this work, halogen (F, Cl, Br or I) was introduced into the Sn catalyst by a facile hydrolysis method. The presence of halogen was confirmed by a collection of ex situ and in situ characterizations, which rendered a more positive valence state of Sn in halogen-incorporated Sn catalyst as compared to unmodified Sn under cathodic potentials in CO2 RR and therefore tuned the adsorption strength of the key intermediate (*OCHO) toward formate formation. As a result, the halogen-incorporated Sn catalyst exhibited greatly enhanced catalytic performance in electrochemical CO2 RR to produce formate.