RESUMO
Owing to their remarkable pharmaceutical properties compared to those of noncovalent inhibitors, the development of targeted covalent inhibitors (TCIs) has emerged as a powerful method for cancer treatment. The K-Ras mutant, which is prevalent in multiple cancers, has been confirmed to be a crucial drug target in the treatment of various malignancies. However, although the K-Ras(G12D) mutation is present in up to 33% of K-Ras mutations, no covalent inhibitors targeting K-Ras(G12D) have been developed to date. The relatively weak nucleophilicity of the acquired aspartic acid (12D) residue in K-Ras may be the reason for this. Herein, we present the first compound capable of covalently engaging both K-Ras(G12D) and K-Ras(G12C) mutants. Proteome profiling revealed that this compound effectively conjugates with G12C and G12D residues, modulating the protein functions in situ. These findings offer a unique pathway for the development of novel dual covalent inhibitors.
Assuntos
Neoplasias , Humanos , Mutação , Compostos de EpóxiRESUMO
Conventional plastic foams are usually produced by fossil-fuel-derived polymers, which are difficult to degrade in nature. As an alternative, cellulose is a promising biodegradable polymer that can be used to fabricate greener foams, yet such a process typically relies on methods (e.g., freeze-drying and supercritical-drying) that are hardly scalable and time-consuming. Here, we develop a fast and scalable approach to prepare cellulose-graphite foams via rapidly cross-linking the cellulose fibrils in metal ions-containing solution followed by ambient drying. The prepared foams exhibit low density, high compressive strength, and excellent water stability. Moreover, the cross-linking of the cellulose fibrils can be triggered by various metal ions, indicating good universality. We further use density functional theory to reveal the cross-linking effect of different ions, which shows good agreement with our experimental observation. Our approach presents a sustainable route toward low-cost, environmentally friendly, and scalable foam production for a range of applications.
Assuntos
Celulose , Grafite , Íons , Polímeros , ÁguaRESUMO
The global demand for plastic foam materials is enormous (annual worth of ≈$341.3 billion) and still surging with an annual growth rate of 4.8%, driven by increasing modern societal needs. The majority of existing foam materials are made of plastics, which take hundreds of years to degrade, leading to severe global pollution issues. Here, a degradable, recyclable, and cost-effective solution to foam materials based on 3D graphite-cellulose nanofibers (G-CNF) foam fabricated from resource-abundant graphite and cellulose via advanced 3D printing is reported. The CNFs can directly disperse the graphite under physical sonication without the need for any chemical reactions. The interaction of the CNFs with graphite through the function of hydrophilic and hydrophobic faces in CNFs renders the dispersion polymer-like rheological properties and good processability with tunable viscosity for 3D printing. A robust, degradable, and recyclable G-CNF foam with designed shapes can be printed in a large scale, demonstrating higher mechanical strength (3.72 MPa versus 0.28 MPa in tensile strength and 2.34 MPa versus 1.11 MPa in compressive stiffness), better fire resistance, degradability, and recyclability than commercial polystyrene foam material. The demonstrated G-CNF foam can potentially replace the commercial plastic foam materials, representing a sustainable solution toward white pollution.
RESUMO
Solid-state batteries (SSBs) promise better safety and potentially higher energy density than the conventional liquid- or gel-based ones. In practice, the implementation of SSBs often necessitates 3D porous scaffolds made by ceramic solid-state electrolytes (SSEs). Herein, a general and facile method to sinter 3D porous scaffolds with a range of ceramic SSEs on various substrates at high temperature in seconds is reported. The high temperature enables rapid reactive sintering toward the desired crystalline phase and expedites the surface diffusion of grains for neck growth; meanwhile, the short sintering duration limits the coarsening, thus accurately controlling the degree of densification to preserve desired porous structures, as well as reducing the loss of volatile elements. As a proof-of-concept, a composite SSE with a good ionic conductivity (i.e., ≈1.9 × 10-4 S cm-1 at room temperature) is demonstrated by integrating poly(ethylene oxide) with the 3D porous Li6.5 La3 Zr1.5 Ta0.5 O12 scaffold sintered by this method. This method opens a new door toward sintering a variety of ceramic-SSE-based 3D scaffolds for all-solid-state battery applications.
RESUMO
Powder to bulk processes, such as additive manufacturing and metal injection molding (MIM), have enabled great potential for complex metal designing and manufacturing. However, additive manufacturing process normally introduces a high residue stress and textures due to the locally intense temperature. MIM is an excellent batch manufacturing process; nevertheless, it is not suitable for rapid screening and development of new metal compositions and structures due to the slow sintering process. Herein, an ultrafast high-temperature sintering (UHS) process is reported that enables the rapid synthesis and sintering of bulk metals/alloys and intermetallic compounds. In this process, elemental powders are mixed and pressed into pellets, followed by UHS sintering in just seconds at a temperature between 1000 and 3000 °C. Three representative compositions, including pure metals, intermetallics, and multielement alloys, are demonstrated with a broad range of melting points. The UHS process for metal sintering is nonmaterials specific, in addition to being extremely rapid, which make it suitable for materials discovery. Furthermore, the sintering method does not apply pressure to the samples, making it compatible with 3D printing and other additive manufacturing processes of complex structures. This rapid sintering technique will greatly facilitate the development and manufacturing of metals and alloys.
RESUMO
Li metal holds great promise to be the ultimate anode choice owing to its high specific capacity and low redox potential. However, processing Li metal into thin-film anode with high electrochemical performance and good safety to match commercial cathodes remains challenging. Herein, a new method is reported to prepare ultrathin, flexible, and high-performance Li-Sn alloy anodes with various shapes on a number of substrates by directly stamping a molten metal solution. The printed anode is as thin as 15 µm, corresponding to an areal capacity of ≈3 mAh cm-2 that matches most commercial cathode materials. The incorporation of Sn provides the nucleation center for Li, thereby mitigating Li dendrites as well as decreasing the overpotential during Li stripping/plating (e.g., <10 mV at 0.25 mA cm-2 ). As a proof-of-concept, a flexible Li-ion battery using the ultrathin Li-Sn alloy anode and a commercial NMC cathode demonstrates good electrochemical performance and reliable cell operation even after repetitive deformation. The approach can be extended to other metal/alloy anodes such as Na, K, and Mg. This study opens a new door toward the future development of high-performance ultrathin alloy-based anodes for next-generation batteries.
RESUMO
Current ceramic solid-state electrolyte (SSE) films have low ionic conductivities (10-8 to 10-5 S/cm ), attributed to the amorphous structure or volatile Li loss. Herein, we report a solution-based printing process followed by rapid (~3 s) high-temperature (~1500°C) reactive sintering for the fabrication of high-performance ceramic SSE films. The SSEs exhibit a dense, uniform structure and a superior ionic conductivity of up to 1 mS/cm. Furthermore, the fabrication time from precursor to final product is typically ~5 min, 10 to 100 times faster than conventional SSE syntheses. This printing and rapid sintering process also allows the layer-by-layer fabrication of multilayer structures without cross-contamination. As a proof of concept, we demonstrate a printed solid-state battery with conformal interfaces and excellent cycling stability. Our technique can be readily extended to other thin-film SSEs, which open previously unexplores opportunities in developing safe, high-performance solid-state batteries and other thin-film devices.
RESUMO
The discovery of new solid-state electrolytes (SSEs) can be guided by computation for next-generation Li batteries toward higher energy density and better safety. However, conventional synthetic methods often suffer from severe loss of Li and poor material quality, therefore preventing the promise of the predicted SSE candidates to be realized. In this study, computationally predicted SSEs with desirable material quality are synthesized via an ultrafast sintering technique. Three new garnet-type Li+ conductors, including Li6.5 Nd3 Zr1.5 Ta0.5 O12 (LNZTO), Li6.5 Sm3 Zr1.5 Ta0.5 O12 (LSZTO), and Li6.5 (Sm0.5 La0.5 )3 Zr1.5 Ta0.5 O12 (L-LSZTO), are screened by density functional theory to exhibit good synthesizability and stability. The ultrafast sintering method by Joule heating effectively shorten the sintering time from several hours to <25 s, thereby reducing the Li loss and effectively merging the grains toward high material quality. In agreement with the computational prediction, LNZTO demonstrates the best synthesizability and phase stability, thereby achieving the highest conductivity of 2.3 × 10-4 S cm-1 among the three new SSE candidates. Using a current density of 0.2 mA cm-2 , the Li/LNZTO/Li symmetric cell can cycle for ≈90 h without obvious increase of overpotentials. This study showcases the successful realization of computational predictions by the ultrafast sintering technique for the rapid optimization and screening of high-performance SSEs.
RESUMO
Ceramics are an important class of materials with widespread applications because of their high thermal, mechanical, and chemical stability. Computational predictions based on first principles methods can be a valuable tool in accelerating materials discovery to develop improved ceramics. It is essential to experimentally confirm the material properties of such predictions. However, materials screening rates are limited by the long processing times and the poor compositional control from volatile element loss in conventional ceramic sintering techniques. To overcome these limitations, we developed an ultrafast high-temperature sintering (UHS) process for the fabrication of ceramic materials by radiative heating under an inert atmosphere. We provide several examples of the UHS process to demonstrate its potential utility and applications, including advancements in solid-state electrolytes, multicomponent structures, and high-throughput materials screening.