Accuracy of the Application of 3-Dimensional Printing Models in Orbital Blowout Fractures-A Preliminary Study.

BACKGROUND: Application of 3-dimensional (3D) printing technology has grown in the medical field over the past 2 decades. In managing orbital blowout fractures, 3D printed models can be used as intraoperative navigators and could shorten the operational time by facilitating prebending or shaping of the mesh preoperatively. However, a comparison of the accuracy of computed tomography (CT) images and printed 3D models is lacking. MATERIAL AND METHODS: This is a single-center retrospective study. Patients with unilateral orbital blowout fracture and signed up for customized 3D printing model were included. Reference points for the 2D distance were defined (intersupraorbital notch distance, transverse horizontal, sagittal vertical, and anteroposterior axes for orbital cavity) and measured directly on 3D printing models and on corresponding CT images. The difference and correlation analysis were conducted. RESULTS: In total, 9 patients were reviewed from June 2017 to December 2020. The mean difference in the intersupraorbital notch measurement between the 2 modules was -0.14 mm (P = 0.67). The mean difference in the distance measured from the modules in the horizontal, vertical, and anteroposterior axes of the traumatic orbits was 0.06 mm (P = 0.85), -0.23 mm (P = 0.47), and 0.51 mm (P = 0.32), whereas that of the unaffected orbits was 0.16 mm (P = 0.44), 0.34 mm (P = 0.24), and 0.1 mm (P = 0.88), respectively. Although 2D parameter differences (<1 mm) between 3D printing models and CT images were discovered, they were not statistically significant. CONCLUSIONS: Three-dimensional printing models showed high identity and correlation to CT image. Therefore, personalized models might be a reliable tool of virtual surgery or as a guide in realistic surgical scenarios for orbital blowout fractures.

Printing a static progressive orthosis for hand rehabilitation.

BACKGROUND: Static progressive orthosis is used for the treatment of severe joint contracture after trauma and/or surgery. However, a custom-fabricated static progressive splint would be expensive and labor intensive. Especially, owing to very limited payment under the current Taiwanese National Health Insurance, the incentives to fabricate a patient-specific splint are insufficient for a therapist. To ease splint construction, we introduced three-dimensional (3D)-printed "shark fin"-shaped device works as a static progressive orthosis for the hand rehabilitation. The aim of this study was to describe and demonstrate the newly designed device. METHODS: This study included a 46-year male suffered from a left distal radius fracture and underwent open reduction internal fixation and a 23-year male with the right thumb flexor pollicis longus rupture, requiring tendon repair. Both subjects used this "shark fin"-shaped device to stretch for increasing range of motion (ROM) of wrist extension and the thumb. RESULTS: The patient receiving ulnar shortening surgery used this device to stretch for increasing ROM of wrist extension. The active ROM of wrist extension improved from 30° to 50°. The other patient with the right thumb flexor pollicis longus rupture suffered from thumb contracture; the ROMs of the metacarpophalangeal (MCP) joint and interphalangeal (IP) joint were 40°-55° and 20°-25°, respectively. After tenolysis surgery, his ROMs of the MCP and IP joints were improved to 10°-35° and 40°-65°, respectively. Following physical therapy by applying the device, his ROMs of the MCP and IP joints were further increased to 0°-40° and 25°-70°, respectively. CONCLUSION: Incorporating the "shark fin"-shaped orthosis into hand rehabilitation increased the ROM of wrist extension for a patient with distal radius fracture and improved the ROM of the MCP and IP joints in another patient after tenolysis surgery.

The symmetry indices of malar mounds for zygomatic bone fracture management based on a computed tomographic model.

BACKGROUND: To date, plastic surgeons do not have an objective method of measuring facial symmetry for zygomatic bone fracture management. Based on clinical practice, the authors utilized a 3-dimensional (3D) model to propose the symmetry index from the anterior view (SIAV) and the symmetry index from inferior view (SIIV). This study aimed to assess the application of these 2 indices. METHODS: The SIAV is defined as the distance between the superior and lower orbital rims (DSLOR) of the defective side divided by that of the healthy side in the anterior view. The SIIV is defined as the area within the region of interest (AROI) of the defective side divided by that of the healthy side in the inferior view. We retrospectively reviewed 95 patients who underwent zygomatic fracture surgery at our medical center from January 2017 to September 2020. The Patients who had bilateral zygomatic fractures and did not have both pre- and postoperative computed tomography (CT) images were excluded. RESULTS: Five out of the 95 patients were enrolled in this study. The difference between pre- and postoperative mean AROI and DSLOR on the healthy side was not significant. The insignificant difference indicates the repeatability of the measurement of the 3D skull model and different CT machines would not affect the calculation of AROI and DSLOR. The mean values of postoperative SIAV (1.06 ± 0.07) and SIIV (1.02 ± 0.08) were closer to 1 than the preoperative values (0.97 ± 0.09 and 1.10 ± 0.12). Although the difference was not statistically significant, the SIIV and SIAV would numerically present the changes in malar bone fracture postoperatively. CONCLUSION: The SIAV and SIIV based on clinical practice could numerically assess the symmetry of the malar mound.

Printing a patient-specific instrument guide for skull osteoma management.

BACKGROUND: To surgically remove osteoma and to keep an optimal cosmetic profile would be very challenging. To solve the difficulty, we utilized the three-dimensional (3D) printing technologies in generating a patient-specific instrument guide (PSIG) for the safe removal of a skull bone tumor. METHODS: The preoperational brain computed tomography (CT) provided the digital imaging with thin slices, and then images were reconstructed into a 3D skull model. Based on the model, we designed a PSIG to make landmarks on the osteoma to avoid excessive removal of the skull bone. During the operation, the surgeons could remove the osteoma piece by piece by using the landmark as a reference point. RESULTS: The PSIG was successfully applied to remove an osteoma that measured 60 × 48 × 40 mm over the left frontoparietal skull of a female patient. The 3D CT reconstruction taken both before and 4 months after surgery showed a significant change in the appearance of the osteoma. CONCLUSION: The PSIG was able to guide the surgeon in the safe removal of the skull osteoma, as well as in maintaining the cosmetic skull profile.

The overview and prospects of BNCT facility at Tsing Hua Open-pool reactor.

The whole picture of the BNCT facility at Tsing Hua Open-pool Reactor will be presented which consists of the following aspects: the construction project, the beam quality, routine operations including the QA program for the beam delivery, determination of boron-10 concentration in blood, T/N ratio, and the clinical affairs including the patient recruit procedure and the patient irradiation procedure. The facility is positioned to serve for conducting clinical trials, emergent (compassionate) treatments, and R&D works.

Printing a Three-Dimensional Patient-Specific Safety Device for Reducing the Potential Risk of Mental Nerve Injury During Transoral Thyroidectomy.

BACKGROUND: Thyroidectomy transoral endoscopic thyroidectomy vestibular approach (TOETVA) is a safe and cosmetically appealing alternative for well-selected patients undergoing thyroidectomy. However, during TOETVA, placement of the two lateral trocars and/or manipulation of the surgical instruments through the trocars may potentially injure and/or compress the mental nerve (MN) because the actual location of the nerve foramen may vary among individuals. The MN injury rate was reported to be as high as 75% in the initial period of robotic-assisted TOETVA. To reduce the potential risk of MN injury, we implemented a three-dimensional printing technology to develop a safety device for TOETVA. METHODS: The patient-specific safety device (PSSD) was a brace with an exact fit to the lower teeth and two safety markers on each side to indicate the location of the mental foramen. For patient in whom the brace would not be applicable, a 3D mandibular model was printed as a PSSD instead. We analyzed 66 patients undergoing TOETVA at our institution from March 2017 to March 2019. The preoperative details and complication profiles were also analyzed. RESULTS: With incorporation of the PSSD into our TOETVA procedure, there have been no cases of MN injury. CONCLUSIONS: Our own TOETVA series has demonstrated that the implementation of the PSSD has been successful in preoperatively identifying and preventing the potential risk of MN injury. Although the additional requirements of preoperative CT and time for fabricating the device impose limitations, the influence of the PSSD in TOETVA is positive.

A phase 0 study of the pharmacokinetics, biodistribution, and dosimetry of 188Re-liposome in patients with metastatic tumors.

BACKGROUND: Liposomes are drug nano-carriers that are capable of targeting therapeutics to tumor sites because of enhanced permeability retention (EPR). In several preclinical studies with various tumor-bearing mice models, 188Re-liposome that has been developed by the Institute of Nuclear Energy Research (INER) demonstrates favorable in vivo tumor targeting, biodistribution, pharmacokinetics, and dosimetry. It inhibits the growth of tumors, increased survival, demonstrates good synergistic combination, and was safe to use. This study conducts a phase 0 low-radioactivity clinical trial of nano-targeted radiotherapeutics 188Re-liposome to evaluate the effectiveness with which it targets tumors and the pharmacokinetics, biodistribution, dosimetry, and its safety in use. Twelve patients with metastatic cancers are studied in this trial. Serial whole-body scans and SPECT/CT are taken at 1, 4, 8, 24, 48, and 72 h after intravenous injection of 111 MBq of 188Re-liposome. The effectiveness with which tumors are targeted, the pharmacokinetics, biodistribution, dosimetry, and safety are evaluated using the VelocityAI and OLINDA/EXM software. Blood samples are collected at different time points for a pharmacokinetics study and a safety evaluation that involves monitoring changes in liver, renal, and hematological functions. RESULTS: The T½z for 188Re-liposome in blood and plasma are 36.73 ± 14.00 h and 52.02 ± 45.21 h, respectively. The doses of radiation that are absorbed to vital organs such as the liver, spleen, lung, kidney, and bone marrow are 0.92 ± 0.35, 1.38 ± 1.81, 0.58 ± 0.28, 0.32 ± 0.09, and 0.06 ± 0.01 mGy/MBq, respectively, which is far less than the reference maximum tolerance dose after injection of 188Re-liposome. 188Re-liposome is absorbed by metastatic tumor lesions and the normal reticuloendothelial (RES) system. Certain patients exhibit a therapeutic response. CONCLUSION: This phase 0 exploratory IND study shows that nanocarrier 188Re-liposome achieves favorable tumor accumulation and tumor to normal organ uptake ratios for a subset of cancer patients. The clinical pharmacokinetic, biodistribution, and dosimetry results justify a further dose-escalating phase 1 clinical trial. TRIAL REGISTRATION: Taiwan FDA MA1101G0 (Jan 31, 2012).

Sphingosine-1-phosphate in Endothelial Cell Recellularization Improves Patency and Endothelialization of Decellularized Vascular Grafts In Vivo.

BACKGROUND: S1P has been shown to improve the endothelialization of decellularized vascular grafts in vitro. Here, we evaluated the potential of tissue-engineered vascular grafts (TEVGs) constructed by ECs and S1P on decellularized vascular scaffolds in a rat model. METHODS: Rat aorta was decellularized mainly by 0.1% SDS and characterized by histology. Rat ECs, were seeded onto decellularized scaffolds, and the viability of the ECs was evaluated by biochemical assays. Then, we investigated the in vivo patency rate and endothelialization for five groups of decellularized vascular grafts (each n = 6) in a rat abdominal aorta model for 14 days. The five groups included (1) rat allogenic aorta (RAA); (2) decellularized RAA (DRAA); (3) DRAA with S1P (DRAA/S1P); (4) DRAA with EC recellularization (DRAA/EC); and (5) DRAA with S1P and EC recellularization (DRAA/EC/S1P). RESULTS: In vitro, ECs were identified by the uptake of Dil-Ac-LDL. S1P enhanced the expression of syndecan-1 on ECs and supported the proliferation of ECs on decellularized vascular grafts. In vivo, RAA and DRAA/EC/S1P both had 100% patency without thrombus formation within 14 days. Better endothelialization, more wall structure maintenance and less inflammation were noted in the DRAA/EC/S1P group. In contrast, there was thrombus formation in the DRAA, DRAA/S1P and DRAA/EC groups. CONCLUSION: S1P could inhibit thrombus formation to improve the patency rate of EC-covered decellularized vascular grafts in vivo and may play an important role in the construction of TEVGs.

Drafting eligible biotech and immunotherapy claims.

The very recent US Supreme Court and Court of Appeals for Federal Circuit (CAFC) cases have dramatically changed the standard of patent eligibility. Several groundbreaking innovations were thus determined to be patent ineligible. The patent ineligibility would impact on the innovation s of the field of biomarkers, diagnostic methods and personalize cancer immunotherapy. To solve the thorny problem of eligibility, this study retrospectively analyzes all CAFC related cases and presents a flow chart determining patent eligibility based on the courts' decisions. Our analysis indicates the best way to avoid eligible rejection or invalidation is that an invention cannot fall within the categories of natural law, natural phenomenon or abstract idea. Thus, claiming non-natural cDNA, involving a step to grow a transformed cell or adding a means clause in a method claim would be some possible solutions. Moreover, based on the flow chart, even though a claim with substantive limitation but not well-understood, routine or conventional activities would be patent eligible; no one has successfully made the argument in the CAFC so far. We believe that this flow chart can serve as a set of guidelines for determining patent eligibility.

Printing a 3-dimensional, Patient-specific Splint for Wound Immobilization: A Case Demonstration.

Three-dimensional (3D) printing technology can generate objects in almost any shape and geometry. This technique also has clinical applications, such as the fabrication of specific devices based on a patient's anatomy. A demonstration study is presented of a 54-year-old man who needed a thermoplastic splint to limit arm movement while a dehisced left shoulder wound healed. The patient's upper extremity was scanned using the appropriate noncontact scanner and 3D technology software, and the polylactic acid splint was printed over the course of 66 hours. This patient-specific splint was worn during the day, and after 2 weeks the wound was healed sufficiently to permit hospital discharge. Creation of an individualized splint is one of many potential medical uses of 3D technology. Although the lengthy printing time imposes limitations, the implications for practice are positive.

Effects of 99mTc-TRODAT-1 drug template on image quantitative analysis.

99mTc-TRODAT-1 is a type of drug that can bind to dopamine transporters in living organisms and is often used in SPCT imaging for observation of changes in the activity uptake of dopamine in the striatum. Therefore, it is currently widely used in studies on clinical diagnosis of Parkinson's disease (PD) and movement-related disorders. In conventional 99mTc-TRODAT-1 SPECT image evaluation, visual inspection or manual selection of ROI for semiquantitative analysis is mainly used to observe and evaluate the degree of striatal defects. However, these methods are dependent on the subjective opinions of observers, which lead to human errors, have shortcomings such as long duration, increased effort, and have low reproducibility. To solve this problem, this study aimed to establish an automatic semiquantitative analytical method for 99mTc-TRODAT-1. This method combines three drug templates (one built-in SPECT template in SPM software and two self-generated MRI-based and HMPAO-based TRODAT-1 templates) for the semiquantitative analysis of the striatal phantom and clinical images. At the same time, the results of automatic analysis of the three templates were compared with results from a conventional manual analysis for examining the feasibility of automatic analysis and the effects of drug templates on automatic semiquantitative analysis results. After comparison, it was found that the MRI-based TRODAT-1 template generated from MRI images is the most suitable template for 99mTc-TRODAT-1 automatic semiquantitative analysis.

The newly filed patent applications for vaccines against staphylococcus aureus.

Staphylococcus aureus (S. aureus) frequently causes life threatening disease. To release the threat, vaccine has been proposed as a preventive intervention against the cause. However, the development of the vaccines is still in early stages. Thus, highlighting the related newly filed patent applications would stimulate further developments.

The limited benefit of "product-by-process" claim.

A product-by-process claim was initially developed when the invention could not otherwise be adequately defined. In the US, a patent applicant can use a product-by-process claim for a new product, no matter whether the product can also be defined by using structure features. However, the applicant mainly bears the burden to establish the novelty between the claimed product and the prior art product. Moreover, in terms of infringement, the very recent CAFC cases indicate that the product must be made by a process recited in the claim to infringe a product-by-process claim. Thus, an assignee almost can not take advantage from product-by-process claims during the patent enforcement by comparing with process claims. From the points of the burden during patent prosecution and confined scope in determining infringement, the benefit of using a product-by-process claim would be very limited.

Fractionated Boron Neutron Capture Therapy in Locally Recurrent Head and Neck Cancer: A Prospective Phase I/II Trial.

PURPOSE: To investigate the efficacy and safety of fractionated boron neutron capture therapy (BNCT) for recurrent head and neck (H&N) cancer after photon radiation therapy. METHODS AND MATERIALS: In this prospective phase 1/2 trial, 2-fraction BNCT with intravenous L-boronophenylalanine (L-BPA, 400 mg/kg) was administered at a 28-day interval. Before each fraction, fluorine-18-labeled-BPA-positron emission tomography was conducted to determine the tumor/normal tissue ratio of an individual tumor. The prescription dose (D80) of 20 Gy-Eq per fraction was selected to cover 80% of the gross tumor volume by using a dose volume histogram, while minimizing the volume of oral mucosa receiving >10 Gy-Eq. Tumor responses and adverse effects were assessed using the Response Evaluation Criteria in Solid Tumors v1.1 and the Common Terminology Criteria for Adverse Events v3.0, respectively. RESULTS: Seventeen patients with a previous cumulative radiation dose of 63-165 Gy were enrolled. All but 2 participants received 2 fractions of BNCT. The median tumor/normal tissue ratio was 3.4 for the first fraction and 2.5 for the second, whereas the median D80 for the first and second fraction was 19.8 and 14.6 Gy-Eq, respectively. After a median follow-up period of 19.7 months (range, 5.2-52 mo), 6 participants exhibited a complete response and 6 exhibited a partial response. Regarding acute toxicity, 5 participants showed grade 3 mucositis and 1 participant showed grade 4 laryngeal edema and carotid hemorrhage. Regarding late toxicity, 2 participants exhibited grade 3 cranial neuropathy. Four of six participants (67%) receiving total D80 > 40 Gy-Eq had a complete response. Two-year overall survival was 47%. Two-year locoregional control was 28%. CONCLUSIONS: Our results suggested that 2-fraction BNCT with adaptive dose prescription was effective and safe in locally recurrent H&N cancer. Modifications to our protocol may yield more satisfactory results in the future.

The shadow of inequitable conduct in the US patent application.

Inequitable conduct regarding any single claim can render the entire patent unenforceable and further damage other related patents and applications in the assignee's patent portfolio. The adverse impact of inequitable conduct significantly became a litigation strategy. The US Federal Circuit (CAFC) observed that inequitable conduct as a patent litigation strategy had become a plague and thus tightened the standard for finding inequitable conduct in a case with full court judges. However, under the shadow of previous adverse impact of inequitable conduct, patent applicants may still submit many marginal related references. This study demonstrates that an applicant even prepared an information disclosure statement (IDS) as many as 50 pages. Actually, under the new standard, inequitable conduct would not further produce significant impact in the US patent system. Thus, a patent applicant need not submit marginal references but should distinguish the prior art from the current application, especially for those listed in the IDS, to avoid the novelty rejection.

Association between the serotonin transporter and cytokines: Implications for the pathophysiology of bipolar disorder.

BACKGROUND: Reduced brain serotonin transporter (SERT) has been demonstrated in bipolar disorder (BD). The aim of this study was to explore the potential role of cytokines on reduced SERT in BD. METHODS: Twenty-eight BD type I patients and 28 age- and gender-matched healthy controls (HCs) were recruited. Single photon emission computed tomography with the radiotracer 123I ADAM was used for SERT imaging. Regions of interest included the midbrain, thalamus, putamen and caudate. Seven cytokines, including tumor necrosis factor-α (TNF-α), interferon-γ (IFN-γ), interleukin-1α (IL-1α), IL-1ß, IL-4, IL-6 and IL-10, were measured using an enzyme linked immune-sorbent assay. RESULTS: SERT availability in the midbrain and caudate was significantly lower in BD compared to HCs. IL-1ß was significantly lower, whereas IL-10 was significantly higher in BD compared to HCs. Multiple linear regression analyses revealed that there were associations between cytokines, IL-1α, IL-1ß, IL-6 and SERT availability in the midbrain but not in the thalamus, putamen and caudate. Furthermore, linear mixed effect analyses demonstrated that these associations were not different between HCs and BD. CONCLUSION: While many cytokines have been proposed to be important in the pathophysiology of BD, our results demonstrated that significant associations between cytokines and SERT availability may explain the role of cytokines in mood regulation. However, these associations were not different between HCs and BD, which imply the role of these cytokines is not specific for BD.

Neither cortisol nor brain-derived neurotrophic factor is associated with serotonin transporter in bipolar disorder.

Converging evidence indicates the hypothalamus-pituitary-adrenal axis and serotonergic neurons exert reciprocal modulatory actions. Likewise, brain-derived neurotrophic factor (BDNF) has been implicated as a growth and differentiation factor in the development of serotonergic neurons. The aim of this study was to examine the interaction of cortisol and BDNF on serotonin transporter (SERT) in bipolar disorder (BD). Twenty-eight BD and 28 age- and gender-matched healthy controls (HCs) were recruited. (123)I-ADAM with single-photon emission computed tomography (SPECT) was applied for measurement of SERT availability in the brain, which included the midbrain, thalamus, putamen and caudate. Ten milliliters of venous blood was withdrawn, when the subject underwent SPECT, for the measurement of the plasma concentration of cortisol and BDNF. SERT availability was significantly decreased in the midbrain and caudate of BD compared with HCs, whereas plasma concentration of cortisol and BDNF did not show a significant difference. The linear mixed-effect model revealed that there was a significant interaction of group and cortisol on SERT availability of the midbrain, but not BDNF. Linear regression analyses by groups revealed that cortisol was associated with SERT availability in the midbrain in the HCs, but not in BD. Considering previous studies, which showed a significant association of cortisol with SERT availability in the HCs and major depressive disorder (MDD), our result replicated a similar finding in HCs. However, the negative finding of the association of cortisol and SERT availability in BD, which was different from MDD, suggests a different role for cortisol in the pathophysiology of mood disorder.

Cognition-Modulated Frontal Activity in Prediction and Augmentation of Antidepressant Efficacy: A Randomized Controlled Pilot Study.

Higher rostral anterior cingulate cortex (rACC) activity correlated with frontal theta power (frontalθ) is associated with better antidepressant responses. The antidepressant efficacy of repetitive transcranial magnetic stimulation (rTMS) varied widely; however, the effects of TMS might be modulated by manipulating the pretreatment neural states. Therefore, we conducted a pilot study to investigate whether manipulated frontalθ before rTMS treatment could predict and augment antidepressant responses. A computerized rACC-engaging cognitive task (RECT) was exploited continuously for 10 min to patients with major depressive disorder. In total, 36 patients were randomized to 3 groups (Group-A: RECT[active] + rTMS[active]; Group-B: RECT[sham] + rTMS[active]; Group-C: RECT[active] + rTMS[sham]). Frontalθ and whole-brain glucose uptakes were assessed. We found that the RECT-modulated increases in frontalθ correlated well with rACC glucose uptakes. The treatment responders demonstrated a significant increase in frontalθ after RECT. Post-RECT frontalθ had good sensitivity/specificity in predicting antidepressant responses to rTMS. Group-A had more reduction in total depression scores, had more responders, and was more likely to achieve remission than other groups (Group-A [41.6%] > Group-B [16.6%] > Group-C [0%], P < 0.05). A significant enhancement in the post-1st-rTMS frontalθ was observed in Group-A responders but not in Group-B responders, supporting the argument that RECT-modulated rTMS augmented rTMS efficacy. In conclusion, this study suggests that manipulating pre-rTMS neural activity could predict and augment antidepressant effects to rTMS treatment.