Diverse Co(II) Coordination Polymers with the Same Mixed Ligands: Evaluation of Chemical Stability and Structural Transformation.

Reactions of Co(OAc)2·4H2O, N'N'-bis(3-pyridylmethyl)oxalamide (L) and 4,4'-sulfonyldibenzoic acid (H2SDA) afforded four coordination polymers with the same mixed ligands, {[Co(L)(SDA)(H2O)2]·H2O·CH3OH}n, 1, {[Co(L)0.5(SDA)]·2H2O·0.5L}n, 2, {[Co(L)1.5(SDA)(H2O)]·H2O}n, 3, and {[Co2(L)1.5(SDA)2(H2O)2]·4H2O}n, 4, which have been structurally characterized using single-crystal X-ray crystallography. Complexes 1-4 are 2D layers, revealing topologies of sql, 2,6L1, (4,4)Ia, and 6L12, respectively, and demonstrating that the metal-to-ligand ratio, solvent system, and reaction temperature are important in determining the structural diversity. The immersion of these complexes into various solvents shows that the structural types govern the chemical stabilities of 1-4. Reversible structural transformation is shown for complexes 1 and 2 upon solvent removal and adsorption, while those of 3 and 4 are irreversible.

[Coordinated Control of Carbon Emission Reduction and Air Quality Improvement in the Industrial Sector in Hunan Province].

Climate warming and air pollution are the main environmental problems in China. This study used China's Carbon Accounting Database, energy economic model, and air quality model to analyze the potential carbon emission peaking path and synergistic air quality improvement gain in the industrial sector in Hunan Province. Based on China's Carbon Accounting Database and the local industry/energy statistical yearbooks in Hunan, the total CO2 emissions in Hunan Province in 2019 were 310.6 Mt, of which the industrial sector accounted for over 70% of the emissions, mainly from the production and supply of electricity, steam, and heat; the production of non-metallic minerals; and the smelting and pressing of ferrous metals. Three potential industrial carbon emission peaking scenarios were analyzed using the LEAP energy economic model, including the business-as-usual scenario (peaking by 2030), moderate emission reduction scenario (peaking by 2028), and aggressive emission reduction scenario (peaking by 2025), by employing different economic growth rates, energy technology progress, and energy structures of the industrial sector. Furthermore, by combining the anthropogenic air pollutant emission inventory and the regional air quality model WRF-Chem, we analyzed the air quality improvement associated with various carbon emission peak paths. The results showed that the annual mean concentrations of major air pollutants had decreased in the three scenarios, especially in the Chang-Zhu-Tan Region. The aggressive emission reduction scenario was the most effective scenario, followed by the moderate emission reduction scenario and the business-as-usual scenario. Manufacturing was the sector with the most significant synergistic effect of pollution and carbon reduction. When carbon emission peaks were achieved, the annual average concentrations of PM2.5 and PM10 in Hunan Province could be synergistically reduced by 0.6-1.8 µg·m-3 and 1.8-8.9 µg·m-3, respectively. Our findings offer important insights into carbon emission peaking and can provide useful information for potential mitigation actions.

[Effect of Carbon Dioxide Emission Reduction Policy on Air Quality Improvement in Jiangsu Province].

Carbon emission peaking and air quality improvement is an urgent issue in the research of the atmospheric environment. Here, the emission factor method was used to compile the city-level greenhouse gas emission inventory of Jiangsu Province from 2010 to 2019, which was then combined with greenhouse gas-air pollutant synergy analysis and WRF-Chem air quality model simulation to analyze the synergistic gain of air quality improvement under different carbon emission reduction scenarios. The results revealed that the annual mean CO2 emission in Jiangsu Province from 2010 to 2019 was 701.74-897.47 Mt. Suzhou, Xuzhou, and Nanjing had the highest emissions (91.19-182.12 Mt·a-1); Yangzhou, Suqian, and Lianyungang had the lowest emissions (13.19-32.54 Mt·a-1); and majority of the cities had a continuous upward trend in the CO2 emissions. Energy activities were the main source of CO2 emissions, accounting for nearly 90%, whereas industrial production processes contributed to the remaining 10%. This study designed three types of CO2 emission reduction conditions according to different emission reduction priorities, namely, sector-wide collaborative, energy priority, and industrial priority. Each type of emission reduction condition included a different intensity of CO2 emission reduction (10%, 20%, and 40%). The condition-based simulation results demonstrated that, taking 2017 as the base year, the average annual decrease in PM2.5 concentration in sector-wide collaborative, energy priority, and industrial priority emission reduction was 6.7-21.1, 3.1-12.0, and 3.4-14.3 µg·m-3, respectively. Sector-wide collaborative emission reduction had the most notable improvement in PM2.5 pollution. Under the condition of the sector-wide collaborative emission reduction of 40%, the average annual PM2.5 concentration of all cities, excluding Xuzhou and Suqian, met the national Ⅱ standard (35 µg·m-3). The change responses of PM10, SO2, NO2, and CO were similar to that of PM2.5, but O3 pollution increased under the conditions of energy and industrial priorities.

Rescue therapy for refractory Helicobacter pylori infection: current status and future concepts.

Helicobacter pylori infection is an important issue worldwide, and several guidelines have been published for clinicians to achieve successful eradication. However, there are still some patients who remain infected with H. pylori after treatment. Clinicians should identify the reasons that caused treatment failure and find strategies to manage them. We have searched and organized the literature and developed methods to overcome factors that contribute to prior treatment failure, such as poor compliance, inadequate intragastric acid suppression, and antibiotic resistance. To improve compliance, telemedicine or smartphone applications might play a role in the modern world by increasing doctor-patient relationships, while concomitant probiotics could be administered to reduce adverse effects and enhance adherence. For better acid suppression, high-potency and high-dose proton-pump inhibitors or potassium-competitive acid blockers have preferable efficacy. To overcome antibiotic resistance, susceptibility tests either by culture or by genotyping are the most commonly used methods and have been suggested for antibiotic selection before rescue therapy, but empirical therapy according to detailed medical history could be an alternative. Eradication with a longer treatment period (14 days) has a better outcome than shorter period (7 or 10 days). Ultimately, clinicians should select antibiotics based on the patient's history of drug allergy, previous antibiotic exposure, local antibiotic resistance, available medications, and cost. In addition, identifying patients with a high risk of cancer and shared decision-making are also essential for those who have experienced eradication failure.

Special-Oriented Annealing-Twins-Induced Orange Peel Morphology of Heat Pipe under Bending Deformation.

The thin-wall heat pipe is an efficient heat transfer component that has been widely used in the field of heat dissipation of high-power electronic equipment in recent years. In this study, the orange peel morphology defect of thin-wall heat pipes after bending deformation was analyzed both for the macro-3D profile and for the micro-formation mechanism. The morphology and crystal orientations of the grains and annealing twins were carefully characterized utilizing optical metallography and the electron backscatter diffraction technique. The results show that after high-temperature sintering treatment, the matrix grains of the heat pipe are seriously coarsened and form a strong Goss texture, while certain annealing twins with the unique copper orientation are retained. The distribution of the Schmid factor value subjected to the uniaxial stress indicates that inhomogeneity in the intergranular deformation exists among the annealing twins and matrix grains. The annealing twin exhibits a "hard-oriented" component during the deformation; thus, it plays a role as a barrier and hinders the slipping of dislocation. As the strain accumulates, part of the annealing twins may protrude from the surface of the heat pipe, forming a large-scale fluctuation of the surface as the so-called "orange peel" morphology. The 3D profile shows the bulged twins mostly perpendicular to the drawing direction, about 200-300 in width and 10-20 µm in height.

Co-localization of two-color rAAV2-retro confirms the dispersion characteristics of efferent projections of mitral cells in mouse accessory olfactory bulb.

The accessory olfactory bulb (AOB), located at the posterior dorsal aspect of the main olfactory bulb (MOB), is the first brain relay of the accessory olfactory system (AOS), which can parallelly detect and process volatile and nonvolatile social chemosignals and mediate different sexual and social behaviors with the main olfactory system (MOS). However, due to its anatomical location and absence of specific markers, there is a lack of research on the internal and external neural circuits of the AOB. This issue was addressed by single-color labeling and fluorescent double labeling using retrograde rAAVs injected into the bed nucleus of the stria terminalis (BST), anterior cortical amygdalar area (ACo), medial amygdaloid nucleus (MeA), and posteromedial cortical amygdaloid area (PMCo) in mice. We demonstrated the effectiveness of this AOB projection neuron labeling method and showed that the mitral cells of the AOB exhibited efferent projection dispersion characteristics similar to those of the MOB. Moreover, there were significant differences in the number of neurons projected to different brain regions, which indicated that each mitral cell in the AOB could project to a different number of neurons in different cortices. These results provide a circuitry basis to help understand the mechanism by which pheromone information is encoded and decoded in the AOS.

Acupuncture treatment of chronic low back pain reverses an abnormal brain default mode network in correlation with clinical pain relief.

BACKGROUND: Acupuncture is gaining in popularity as a treatment for chronic low back pain (cLBP); however, its therapeutic mechanisms remain controversial, partly because of the absence of an objective way of measuring subjective pain. Resting-state functional MRI (rsfMRI) has demonstrated aberrant default mode network (DMN) connectivity in patients with chronic pain, and also shown that acupuncture increases DMN connectivity in pain-modulator and affective-emotional brain regions of healthy subjects. OBJECTIVE: This study sought to explore how cLBP influences the DMN and whether, and how, the altered DMN connectivity is reversed after acupuncture for clinical pain. METHODS: RsfMRI data from 20 patients with cLBP, before and after 4 weeks of treatment, and 10 age- and gender-matched healthy controls (without treatment) were analysed using independent components analyses to determine connectivity within the DMN, and combined with correlation analyses to compute covariance between changes in DMN connectivity and changes in clinical pain. Visual analogue scale data were assessed to rate clinical pain levels. RESULTS: Less connectivity within the DMN was found in patients with cLBP than in healthy controls, mainly in the dorsolateral prefrontal cortex, medial prefrontal cortex, anterior cingulate gyrus and precuneus. After acupuncture, patients' connectivities were restored almost to the levels seen in healthy controls. Furthermore, reductions in clinical pain were correlated with increases in DMN connectivity. CONCLUSIONS: This result suggests that modulation of the DMN by acupuncture is related to its therapeutic effects on cLBP. Imaging of the DMN provides an objective method for assessment of the effects of acupuncture-induced analgesia.

Prospective, randomized controlled trial of physiotherapy and acupuncture on motor function and daily activities in patients with ischemic stroke.

OBJECTIVE: To assess the value of acupuncture for promoting the recovery of patients with ischemic stroke and to determine whether the outcomes of combined physiotherapy and acupuncture are superior to those with physiotherapy alone. DESIGN: Prospective randomized controlled trial. SETTING: Department of Rehabilitation Medicine, Huashan Hospital, Fudan University, P. R. China. PARTICIPANTS: 120 inpatients and outpatients (84 men and 36 women). INTERVENTIONS: Acupuncture, physiotherapy, and physiotherapy combined with acupuncture. MAIN OUTCOME MEASURES: Motor function in the limbs was measured with the Fugl-Meyer assessment (FMA). The modified Barthel index (MBI) was used to rate activities of daily living. All evaluations were performed by assessors blinded to treatment group. RESULTS: On the first day of therapy (day 0, baseline), FMA and MBI scores did not significantly differ among the treatment groups. Compared with baseline, on the 28th day of therapy the mean FMA scores of the physiotherapy, acupuncture, and combined treatment groups had increased by 65.6%, 57.7%, and 67.2%, respectively; on the 56th day, FMA scores had increased by 88.1%, 64.5%, and 88.6%, respectively (p<0.05). The respective MBI scores in the three groups increased by 85.2%, 60.4%, and 63.4% at day 28 and by 108.0%, 71.2%, and 86.2% at day 56, respectively (p<0.05). However, FMA scores did not significantly differ among the three treatment groups on the 28th day. By the 56th day, the FMA and MBI scores of the physiotherapy group were 46.1% and 33.2% greater, respectively, than those in the acupuncture group p<0.05). No significant differences were seen between the combined treatment group and the other groups. In addition, the FMA subscores for the upper extremities did not reflect any significant improvement in any group on the 56th day. Although the FMA subscores for the upper and lower extremities and the MBI score in the combined treatment group were higher than those in the acupuncture group, the differences were not statistically significant. CONCLUSIONS: Acupuncture is less effective for the outcome measures studied than is physiotherapy. Moreover, the therapeutic effect of combining acupuncture with physiotherapy was not superior to that of physiotherapy alone. A larger-scale clinical trial is necessary to confirm these findings.