Sequential deacetylation/self-gelling chitin hydrogels and scaffolds functionalized with fucoidan for enhanced BMP-2 loading and sustained release.

Bone morphogenetic protein 2 (BMP-2) is a potent osteoinductive factor that promotes bone formation. A major obstacle to the clinical application of BMP-2 is its inherent instability and complications caused by its rapid release from implants. Chitin based materials have excellent biocompatibility and mechanical properties, making them ideal for bone tissue engineering applications. In this study, a simple and easy method was developed to spontaneously form deacetylated ß-chitin (DAC-ß-chitin) gels at room temperature through a sequential deacetylation/self-gelation process. The structural transformation of ß-chitin to DAC-ß-chitin leads to the formation of self-gelling DAC-ß-chitin, from which hydrogels and scaffolds were prepared. Gelatin (GLT) accelerated the self-gelation of DAC-ß-chitin and increased the pore size and porosity of the DAC-ß-chitin scaffold. The DAC-ß-chitin scaffolds were then functionalized with a BMP-2-binding sulfate polysaccharide, fucoidan (FD). Compared with ß-chitin scaffolds, FD-functionalized DAC-ß-chitin scaffolds showed higher BMP-2 loading capacity and more sustainable release of BMP-2, and thus had better osteogenic activity for bone regeneration.

Low sink demand caused net photosynthetic rate decrease is closely related to the irrecoverable damage of oxygen-releasing complex and electron receptor in peach trees.

Source sink balance is one of the major determinants of carbon partitioning in plants. However, its effects on photosynthesis in fruit trees are largely unknown. In this work, the effects of low sink demand on net photosynthetic rate (Pn) and chlorophyll fluorescence after fruit removal (-fruit) in peach (Prunus persica (L.) Batsch cv. 'Zaojiubao') trees were investigated. The stepwise energy flow through photosystem II (PSII) at the reaction center (RC) was analyzed with quantitative analyses of fluorescence transient, also called JIP-test. We found that Pn was significantly lower and closely correlated to the leaf stomatal conductance (Gs) of -fruit trees than that of fruit retained (+fruit) trees. Leaf temperature (Tleaf) of -fruit trees was remarkably higher than that of +fruit trees. Day-time-period assays of chlorophyll (Chl) fluorescence revealed that, in the leaves of -fruit trees, the fluorescence parameters, such as NPQ (non-photochemical quenching coefficient) and ΦD0 (maximum quantum yield of non-photochemical de-excitation), decreased in the morning and recovered to the normal level in the afternoon, whereas other parameters, such as ΦE0 (quantum yield for electron transport at t = 0), Ψ0 (probability that a trapped exciton moves an electron to QA pool), F0 (minimum fluorescence, when all PSII RCs are open) and Wk (relative variable fluorescence at 300 µs of the chlorophyll fluorescence transient), did not. These results suggest that OEC complex and QA pool were irreversibly affected by low sink demand, whereas light harvest antenna and PSII potential efficiency retained a strong ability to recover.

Development of Pinhole-Free Amorphous Aluminum Oxide Protective Layers for Biomedical Device Applications.

This paper describes synthesis of ultrathin pinhole-free insulating aluminum oxide layers for electronic device protection in corrosive liquid environments, such as phosphate buffered saline (PBS) or clinical fluids, to enable emerging biomedical applications such as biomolecular sensors. A pinhole-free 25-nm thick amorphous aluminum oxide layer has been achieved using ultra-high vacuum DC magnetron reactive sputtering of aluminum in oxygen/argon plasma followed by oxygen plasma post-processing. Deposition parameters were optimized to achieve the best corrosion protection of lithographically defined device structures. Electrochemical deposition of copper through the aluminum oxide layers was used to detect the presence (or absence) of pinholes. FTIR, XPS, and spectroscopic ellipsometry were used to characterize the material properties of the protective layers. Electrical resistance of the copper device structures protected by the aluminum oxide layers and exposed to a PBS solution was used as a metric to evaluate the long-term stability of these device structures.

High-throughput top-down fabrication of uniform magnetic particles.

Ion Beam Aperture Array Lithography was applied to top-down fabrication of large dense (10(8)-10(9) particles/cm(2)) arrays of uniform micron-scale particles at rates hundreds of times faster than electron beam lithography. In this process, a large array of helium ion beamlets is formed when a stencil mask containing an array of circular openings is illuminated by a broad beam of energetic (5-8 keV) ions, and is used to write arrays of specific repetitive patterns. A commercial 5-micrometer metal mesh was used as a stencil mask; the mesh size was adjusted by shrinking the stencil openings using conformal sputter-deposition of copper. Thermal evaporation from multiple sources was utilized to form magnetic particles of varied size and thickness, including alternating layers of gold and permalloy. Evaporation of permalloy layers in the presence of a magnetic field allowed creation of particles with uniform magnetic properties and pre-determined magnetization direction. The magnetic properties of the resulting particles were characterized by Vibrating Sample Magnetometry. Since the orientation of the particles on the substrate before release into suspension is known, the orientation-dependent magnetic properties of the particles could be determined.

Overexpression of chloroplast-localized small molecular heat-shock protein enhances chilling tolerance in tomato plant.

There are many reports about the correlation between small molecular heat-shock protein (sHSP) and the acquirement of chilling tolerance, but no direct evidence that sHSP confers enhanced chilling tolerance to plant has been reported. A DNA construct, including tomato chloroplast-localized small molecular heat-shock protein (CPsHSP) cDNA under the control of cauliflower mosaic virus 35S (35SCaMV) promoter, was introduced into the genome of tomato plants. The chilling tolerance of the transgenic tomato lines and the non-transgenic tomato was evaluated. After exposure to chilling stress, the transgenic plants exhibited lighter chilling-injured symptoms, suffered less electrolyte leakage and less destruction of chlorophyll, accumulated less anthocyanins and less MDA and kept higher value of net photosynthetic rate, than non-transgenic plant. All results indicated consistently that transgenic tomato plants had stronger chilling tolerance. These characters are ascribed to constitutive expression of cpshsp and lead to the conclusion that HSP can enhance chilling tolerance in plant.