Molecular Recognition-Mediated Transformation of Single-Chain Polymer Nanoparticles into Crosslinked Polymer Films.

We describe single-chain polymer nanoparticles (SCNPs) possessing intramolecular dynamic covalent crosslinks that can transform into polymer films through a molecular recognition-mediated crosslinking process. The SCNPs utilise molecular recognition with surface-immobilised proteins to concentrate upon a substrate, bringing the SCNPs into close spatial proximity with one another and allowing their dynamic covalent crosslinkers to undergo intra- to interpolymer chain crosslinking leading to the formation of polymeric film. SCNPs must possess both the capacity for specific molecular recognition and a dynamic nature to their intramolecular crosslinkers to form polymer films, and an investigation of the initial phase of film formation indicates it proceeds from features which form upon the surface then grow predominantly in the xy directions. This approach to polymer film formation presents a potential method to "wrap" surfaces displaying molecular recognition motifs-which could potentially include viral, cellular and bacterial surfaces or artificial surfaces displaying multivalent recognition motifs-within a layer of polymer film.

Nanoscale silicon substrate patterns from self-assembly of cylinder forming poly(styrene)-block-poly(dimethylsiloxane) block copolymer on silane functionalized surfaces.

Poly(styrene)-block-poly(dimethylsiloxane) (PS-b-PDMS) is an excellent block copolymer (BCP) system for self-assembly and inorganic template fabrication because of its high Flory-Huggins parameter (χ âˆ¼ 0.26) at room temperature in comparison to other BCPs, and high selective etch contrast between PS and PDMS block for nanopatterning. In this work, self-assembly in PS-b-PDMS BCP is achieved by combining hydroxyl-terminated poly(dimethylsiloxane) (PDMS-OH) brush surfaces with solvent vapor annealing. As an alternative to standard brush chemistry, we report a simple method based on the use of surfaces functionalized with silane-based self-assembled monolayers (SAMs). A solution-based approach to SAM formation was adopted in this investigation. The influence of the SAM-modified surfaces upon BCP films was compared with polymer brush-based surfaces. The cylinder forming PS-b-PDMS BCP and PDMS-OH polymer brush were synthesized by sequential living anionic polymerization. It was observed that silane SAMs provided the appropriate surface chemistry which, when combined with solvent annealing, led to microphase segregation in the BCP. It was also demonstrated that orientation of the PDMS cylinders may be controlled by judicious choice of the appropriate silane. The PDMS patterns were successfully used as an on-chip etch mask to transfer the BCP pattern to underlying silicon substrate with sub-25 nm silicon nanoscale features. This alternative SAM/BCP approach to nanopattern formation shows promising results, pertinent in the field of nanotechnology, and with much potential for application, such as in the fabrication of nanoimprint lithography stamps, nanofluidic devices or in narrow and multilevel interconnected lines.

Metal-conductive polymer hybrid nanostructures: preparation and electrical properties of palladium-polyimidazole nanowires.

A simple, convenient method for the formation of hybrid metal/conductive polymer nanostructures is described. Polyimidazole (PIm) has been templated on λ-DNA via oxidative polymerisation of imidazole using FeCl3 to produce conductive PIm/DNA nanowires. The PIm/DNA nanowires were decorated with Pd (Pd/PIm/DNA) by electroless reduction of PdCl4(-2) with NaBH4 in the presence of PIm/DNA; the choice of imidazole was motivated by the potential Pd(II) binding site at the pyridinic N atom. The formation of PIm/DNA and the presence of metallic Pd on Pd/PIm/DNA nanowires were verified by FTIR, UV-vis and XPS spectroscopy techniques. AFM studies show that the nanowires have diameters in the range 5-45 nm with a slightly greater mean diameter (17.1 ± 0.75 nm) for the Pd-decorated nanowires than the PIm/DNA nanowires (14.5 ± 0.89 nm). After incubation for 24 h in the polymerisation solution, the PIm/DNA nanowires show a smooth, uniform morphology, which is retained after decoration with Pd. Using a combination of scanned conductance microscopy, conductive AFM and two-terminal measurements we show that both types of nanowire are conductive and that it is possible to discriminate different possible mechanisms of transport. The conductivity of the Pd/PIm/DNA nanowires, (0.1-1.4 S cm(-1)), is comparable to the PIm/DNA nanowires (0.37 ± 0.029 S cm(-1)). In addition, the conductance of Pd/PIm/DNA nanowires exhibits Arrhenius behaviour (E(a )= 0.43 ± 0.02 eV) as a function of temperature in contrast to simple Pd/DNA nanowires. These results indicate that although the Pd crystallites on Pd/PIm/DNA nanowires decorate the PIm polymer, the major current pathway is through the polymer rather than the Pd.

Click modification of diazido acridine intercalators: a versatile route towards decorated DNA nanostructures.

Diazido derivatives of 3,6-diamino acridine (proflavine) intercalate into DNA and undergo functionalization through click chemistry to form 1D nanostructures with redox active, conductive nanowire, and fluorescent properties. This two-step approach, intercalation followed by click modification allows for the controlled decoration of DNA nanostructures.

Mechanism of formation of supramolecular DNA-templated polymer nanowires.

Details of the mechanism of formation of supramolecular polymer nanowires by templating on DNA are revealed for the first time using AFM. Overall these data reveal that the smooth, regular, structures produced are rendered by highly dynamic supramolecular transformations occurring over the micrometre scale. In the initial stages of the process a low density of conducting polymer (CP) binds to the DNA as, essentially, spherical particles. Further reaction time produces DNA strands which are more densely packed with particles giving a beads-on-a-string appearance. The particles subsequently undergo dynamic reconfiguration so as to elongate along the template axis and merge to yield the highly regular, smooth morphology of the final nanowire. MD simulations illustrate the early stages of the process showing the binding of globular CP to duplex DNA, while the latter stages can be modeled effectively by a linear thermodynamic description based on the balance between the line energy, which accounts for adhesion of the material to the template, and its surface tension. This model accounts for the phenomena observed in the AFM studies: the relative success of DNA templating of polymers compared to metals; the slow approach to equilibrium; and the observed thinning and 'necking' phenomena as the structures transform from beads-on-a-string to smooth nanowire.

DNA-templated nanowires: morphology and electrical conductivity.

DNA-templating has been used to create nanowires from metals, compound semiconductors and conductive polymers. The mechanism of growth involves nucleation at binding sites on the DNA followed by growth of spherical particles and then, under favourable conditions, a slow transformation to a smooth nanowire. The final transformation is favoured by restricting the amount of templated material per unit length of template and occurs most readily for materials of low surface tension. Electrical measurements on DNA-templated nanowires can be facilitated using three techniques: (i) standard current-voltage measurements with contact electrodes embedded in a dielectric so that there is a minimal step height at the dielectric/electrode boundary across which nanowires may be aligned by molecular combing, (ii) the use of a dried droplet technique and conductive AFM to determine contact resistance by moving the tip along the length of an individual nanowire and (iii) non-contact assessment of conductivity by scanned conductance microscopy on Si/SiO2 substrates.

Conductive, monodisperse polyaniline nanofibers of controlled length using well-defined cylindrical block copolymer micelles as templates.

Stable colloidal dispersions of polyaniline (PAni) nanofibers with controlled lengths from about 200 nm-1.1 µm and narrow length distributions (Lw/Ln < 1.04; Lw = weight average micelle length, Ln = number average micelle length) were prepared through the template-directed synthesis of PAni using monodisperse, solution-self-assembled, cylindrical, block copolymer micelles as nanoscale templates. These micelles were prepared through a crystallization-driven living self-assembly method from a poly(ferrocenyldimethylsilane)-b-poly(2-vinylpyridine) block copolymer (PFS25 -b-P2VP425). This material was initially self-assembled in iPrOH to form cylindrical micelles with a crystalline PFS core and a P2VP corona and lengths of up to several micrometers. Sonication of this sample then yielded short cylinders with average lengths of 90 nm and a broad length distribution (Lw/Ln = 1.32). Cylindrical micelles of PFS25 -b-P2VP425 with controlled lengths and narrow length distributions (Lw/Ln < 1.04) were subsequently prepared using thermal treatment at specific temperatures between 83.5 and 92.0 °C using a 1D self-seeding process. These samples were then employed in the template-directed synthesis of PAni nanofibers through a two-step procedure, where the micellar template was initially stabilised by deposition of an oligoaniline coating followed by addition of a polymeric acid dopant, resulting in PAni nanofibers in the emeraldine salt (ES) state. The ES-PAni nanofibers were shown to be conductive by scanning conductance microscopy, whereas the precursor PFS25-b-P2VP425 micelle templates were found to be dielectric in character.

Electrically conductive magnetic nanowires using an electrochemical DNA-templating route.

The fabrication of electrically conducting magnetic nanowires has been achieved using electrochemical DNA-templating of iron. In this approach, binding of the Fe(2+) cations to the DNA "template" molecules has been utilised to promote growth along the molecular axis. Formation of Fe within the product material was verified by XRD and XPS studies, which confirmed an iron/oxide "core-shell" structure. The effectiveness of the DNA duplex to direct the metal growth in one dimension was highlighted by AFM which reveals the product material to comprise high aspect ratio nanostructured architectures. These "nanowires" were observed to have morphologies consisting of densely packed linear arrangements of metal particles along the template, with wire diameters up to 26 nm. The structures were confirmed to be electrically conductive, as expected for such Fe-based materials, and to display superparamagnetic behaviour, consistent with the small size and particulate nature of the nanowires.

Equilibrium and non-equilibrium thermodynamics of templating reactions for the formation of nanowires.

The thermodynamics of the templating of materials on one-dimensional templates, such as DNA, is modeled by considering two terms: the surface tension of the material (γ) and a line energy (σ = 2πr(T)γ(T)) that represents the adhesion of the material to the template (radius r(T)). We show that as long as the reaction stoichiometry does not exceed a certain limit (√[3ν/2π] < r(T) [absolute value]γ(T)[absolute value]/γ ; ν = volume of material per unit length of template) then a sample of smooth, uniform wires is the equilibrium state. If the amount of material exceeds this limit, then the material will comprise a single macroscopic particle at equilibrium. The behavior of the system is similar to a morphological wetting transition and the model can rationalize the available experimental data on the reaction conditions required to form smooth DNA-templated nanowires. Using the framework of linear non-equilibrium thermodynamics, we also show that the model can describe qualitatively the observed evolution of these nanostructures from beads-on-a-string morphologies to smooth nanowires and construct a stochastic differential equation for the process. Numerical simulations and scaling arguments suggest that the same scaling behavior as the Edwards-Wilkinson equation is observed.

Synthesis, characterisation and electrical properties of supramolecular DNA-templated polymer nanowires of 2,5-(bis-2-thienyl)-pyrrole.

Supramolecular polymer nanowires have been prepared by using DNA-templating of 2,5-(bis-2-thienyl)-pyrrole (TPT) by oxidation with FeCl(3) in a mixed aqueous/organic solvent system. Despite the reduced capacity for strong hydrogen bonding in polyTPT compared to other systems, such as polypyrrole, the templating proceeds well. FTIR spectroscopic studies confirm that the resulting material is not a simple mixture and that the two types of polymer interact. This is indicated by shifts in bands associated with both the phosphodiester backbone and the nucleobases. XPS studies further confirm the presence of DNA and TPT, as well as dopant Cl(-) ions. Molecular dynamics simulations on a [{dA(24):dT(24)}/{TPT}(4)] model support these findings and indicate a non-coplanar conformation for oligoTPT over much of the trajectory. AFM studies show that the resulting nanowires typically lie in the 7-8 nm diameter range and exhibit a smooth, continuous, morphology. Studies on the electrical properties of the prepared nanowires by using a combination of scanned conductance microscopy, conductive AFM and variable temperature two-terminal I-V measurements show, that in contrast to similar DNA/polymer systems, the conductivity is markedly reduced compared to bulk material. The temperature dependence of the conductivity shows a simple Arrhenius behaviour consistent with the hopping models developed for redox polymers.

Magnetic and conductive magnetite nanowires by DNA-templating.

The synthesis of nanowires made of magnetite (Fe(3)O(4)) phase iron oxide was achieved using DNA as a template to direct formation of the metal oxide and confine its growth in two dimensions. This simple solution-based approach involves initial association of Fe(2+) and Fe(3+) to the DNA "template" molecules, and subsequent co-precipitation of the Fe(3)O(4) material, upon increasing the solution pH, to give the final metal oxide nanowires. Analysis of the DNA-templated material, using a combination of FTIR, XRD, XPS, and Raman spectroscopy, confirmed the iron oxide formed to be the Fe(3)O(4) crystal phase. Investigation of the structural character of the nanowires, carried out by AFM, revealed the metal oxide to form regular coatings of nanometre-scale thickness around the DNA templates. Statistical analysis showed the size distribution of the nanowires to follow a trimodal model, with the modal diameter values identified as 5-6 nm, 14-15 nm, and 23-24 nm. Additional scanning probe microscopy techniques (SCM, MFM) were also used to verify that the nanowire structures are electrically conducting and exhibit magnetic behaviour. Such properties, coupled with the small dimensions of these materials, make them potentially good candidates for application in a host of future nanoscale device technologies.

Influence of lipids on the interfacial disposition of respiratory syncytical virus matrix protein.

The propensity of a matrix protein from an enveloped virus of the Mononegavirales family to associate with lipids representative of the viral envelope has been determined using label-free methods, including tensiometry and Brewster angle microscopy on lipid films at the air-water interface and atomic force microscopy on monolayers transferred to OTS-treated silicon wafers. This has enabled factors that influence the disposition of the protein with respect to the lipid interface to be characterized. In the absence of sphingomyelin, respiratory syncytial virus matrix protein penetrates monolayers composed of mixtures of phosphocholines with phosphoethanolamines or cholesterol at the air-water interface. In ternary mixtures composed of sphingomyelin, 1,2-dioleoyl-sn-glycero-3-phosphocholine, and cholesterol, the protein exhibits two separate behaviors: (1) peripheral association with the surface of sphingomyelin-rich domains and (2) penetration of sphingomyelin-poor domains. Prolonged incubation of the protein with mixtures of phosphocholines and phosphoethanolamines leads to the formation of helical protein assemblies of uniform diameter that demonstrate an inherent propensity of the protein to assemble into a filamentous form.

Preparation, characterization and scanned conductance microscopy studies of DNA-templated one-dimensional copper nanostructures.

The synthesis of one-dimensional metal nanostructures can be achieved through the use of DNA molecules as templates to control and direct metal deposition. Copper nanostructures have been fabricated using this strategy, through association of Cu(2+) ions to DNA templates and reduced with ascorbic acid. Due to the possibility that the reduction of the Cu(2+) can result in the preferential formation of Cu(2)O over metallic Cu(0), X-ray photoelectron spectroscopy and X-ray diffraction have been carried out to establish the chemical identity of the nanostructures. Conclusive evidence is found that reduction of the Cu(2+) ions does result in the formation of the desired metallic Cu(0) structures. The morphology of the nanostructured Cu(0) material has also been observed by atomic force microscopy, showing the structures to have a "beads-on-a-string" appearance and being 3.0-5.5 nm in height. The electrical properties of the structures have been investigated by scanned conductance microscopy, showing the Cu(0) structures exhibit much larger electrical resistance than expected for a metallic nanowire. This is thought to be a consequence of their "beads-on-a-string" morphology and small lateral dimensions (sub-10 nm); both these factors would be expected to increase the electron scattering rate, and, further, there are likely to be significant tunneling barriers at the Cu(0) particle-particle junctions.

A new route to the production and nanoscale patterning of highly smooth, ultrathin zirconium oxide films.

Metal-stabilized bilayers, prepared by the self-assembly of octadecyltrichorosilane on an oxidized silicon surface followed by the Langmuir-Blodgett deposition of a monolayer of octadecylphosphonic acid, have been used to generate 1.6 nanometer thick, highly uniform, zirconium oxide films following annealing. Patterning of the thin films on the nanometre scale was achieved using nanodisplacement methodology, by careful control of an atomic force microscope (AFM) probe, which allowed the selective removal of the upper leaflet of the bilayer.