RESUMO
OBJECTIVES: The aim of Working Group 4 was to address patient benefits associated with implant dentistry. Focused questions on (a) dental patient-reported outcomes (dPROs), (b) improvement in orofacial function, and (c) preservation of orofacial tissues in partially and fully edentulous patients following provision of implant-retained/supported dental prostheses were addressed. MATERIALS AND METHODS: Three systematic reviews formed the basis for discussion. Participants developed statements and recommendations determined by group consensus based on the findings of the systematic reviews. These were then presented and accepted following further discussion and modifications as required by the plenary of the 7th ITI Consensus Conference, taking place in 2023 in Lisbon, Portugal. RESULTS: Edentulous patients wearing complete dentures (CD) experience substantial improvements in overall dPROs and orofacial function following treatment with either complete implant-supported fixed dental prostheses (CIFDP) or implant overdentures (IODs). With respect to dPROs, mandibular IODs retained by two implants are superior to IODs retained by one implant. However, increasing the number of implants beyond two, does not further improve dPROs. In fully edentulous patients, rehabilitation with CIFDP or IOD is recommended to benefit the preservation of alveolar bone and masseter muscle thickness. CONCLUSIONS: Completely edentulous patients benefit substantially when at least the mandible is restored using an CIFDP or an IOD compared to CD. In fully edentulous patients, implant prostheses are the best option for tooth replacement. The availability of this treatment modality should be actively promoted in all edentulous communities, including those with limited access and means.
Assuntos
Implantes Dentários , Boca Edêntula , Humanos , Boca Edêntula/cirurgia , Prótese Total , Consenso , Revestimento de DentaduraRESUMO
OBJECTIVE: Fundamentally, this review addresses the following question: In partially or fully edentulous patients, do implant-supported dental prostheses preserve orofacial tissues when compared to conventional prostheses or no therapy? MATERIALS AND METHODS: This study was conducted according to the 2020 PRISMA guidelines for systematic reviews. Electronic searches were conducted at PubMed and Embase databases followed by manual search. Clinical studies comparing the effect of implant-supported prostheses with conventional rehabilitation or no treatment on alveolar bone resorption, remaining teeth, and jaw muscle thickness were considered for inclusion. A qualitative synthesis was conducted with all included studies, and data from selected studies were pooled quantitatively to perform a meta-analysis. RESULTS: A total of 14 studies were selected for analysis. Six studies reported on the effect of implant therapy on alveolar bone resorption (n = 453), six on the remaining teeth (n = 1014), while four studies evaluated masseter muscle thickness (n = 158). The results of the meta-analyses assessing alveolar bone resorption in the posterior mandible and in the anterior area of the maxilla, both fixed and random effects models, yielded no benefit of rehabilitation with implant-supported prostheses when compared to conventional prostheses. For masseter bone thickness, however, a significant benefit for implant-supported prosthesis was observed. CONCLUSIONS: This systematic review and meta-analysis were unable to unequivocally answer the focus question. There are some indicators of the benefit of implant-supported prostheses over conventional prostheses or no therapy in preserving orofacial tissues, particularly for masseter muscle thickness. However, the evidence is still insufficient to confirm such perception.
Assuntos
Perda do Osso Alveolar , Humanos , Perda do Osso Alveolar/prevenção & controle , Bases de Dados Factuais , Mandíbula , Músculo Masseter , Implantação DentáriaRESUMO
PURPOSE: To assess the effect of implant abutment material and soft tissue thickness on the peri-implant soft tissue color using spectrophotometry and to evaluate gingival esthetics and patient satisfaction with three different abutments. MATERIALS AND METHODS: Twenty-five patients with a missing maxillary tooth in the esthetic area received an endosseous implant using a two-stage protocol. Gray titanium, pink anodized titanium, and hybrid zirconia custom abutments were fabricated for each participant and inserted for one week with a cross-over design in a randomized manner. Color measurements were made using a spectrophotometer comparing midfacial peri-implant soft tissue and marginal gingiva of the contralateral tooth. CIE Lab color scale was used following the formula: ΔE = [(∆L)2 + (∆a)2 + (∆b)2 ]½ . PES scores were recorded, and patient satisfaction questionnaires were completed at each abutment change visit and at 1-year follow-up. Statistical analysis was performed using Friedman's test and the Wilcoxon signed-rank test with Bonferroni correction as well as the Mann-Whitney U test (α = 0.05). RESULTS: Abutment material type significantly affected the ΔΕ values of the peri-implant mucosa when compared to the contralateral teeth. At baseline, the highest ΔΕ means ± standard deviation (SD) values were obtained with gray titanium (11.25 ± 2.98), followed by pink anodized titanium (9.90 ± 2.51), and zirconia abutments (6.46 ± 1.43). Differences were statistically significant irrespective of soft tissue thickness. The highest PES values were obtained with zirconia abutments (10.88 ± 0.88), followed by pink anodized titanium (10.12 ± 1.13) and the lowest with gray titanium (9.68 ± 1.41). PES differences were significant only for the thin soft tissue group. Regarding patient satisfaction, VAS scores for the pink anodized and zirconia hybrid abutment groups were higher than the gray titanium group for each question. CONCLUSION: The color difference between soft tissues around teeth and implants was significant in all groups regardless of tissue thickness. The hybrid zirconia abutments resulted in the least color difference, followed by pink anodized and gray titanium. Significantly different PES values were recorded only for the thin tissue group. There was no significant difference in patient satisfaction between zirconia and pink anodized abutments at the 1-year follow up. Pink anodized abutments represent a good esthetic alternative to zirconia hybrid abutments especially in mechanically challenging situations.
Assuntos
Dente Suporte , Implantes Dentários para Um Único Dente , Humanos , Maxila , Estudos Cross-Over , Titânio , Estética Dentária , Zircônio , Materiais DentáriosRESUMO
The purpose of this clinical report is to present a complete digital workflow for the fabrication of complete arch fixed zirconia implant restorations. An intraoral scanner was used to capture the implants' position at the abutment level and also the patient's existing interim prostheses with the double digital scanning technique. A novel scan body and impression pin were utilized throughout the scanning process which allowed for the accurate and reproducible superimposition of the generated Standard Tesselation Language (STL) files. Prosthesis prototypes were digitally designed and fabricated, tried in, and verified intraorally. The definitive zirconia prostheses were then fabricated and delivered to the patient. This technique can be utilized in both arches overcoming the absence of stable intraoral landmarks for superimposition of STL files.
Assuntos
Implantes Dentários , Prótese Dentária Fixada por Implante , Desenho Assistido por Computador , Técnica de Moldagem Odontológica , Humanos , Fluxo de Trabalho , ZircônioRESUMO
The aims of this study were to (i) evaluate the bone alterations following maxillary molar extraction and (ii) identify the factors associated with bone alterations using a tomographic analysis. Cone Beam Computer Tomographies (CBCTs) of 17 subjects with 25 maxillary molars were analyzed, before and, in average, 12 months following extraction. Fifty CBCTs were segmented as 3D models that were used as reference for analysis. Cross-sectional planes were established to measure the dimensional changes in the vertical, horizontal aspects, and the area of the alveolar bone. Associations between root divergence, initial bone location related to the maxillary sinus, and the thickness of buccal and palatal bone at baseline was assessed using mixed-effect models. Overall, the average reduction in vertical bone height was 35.23% (2.61 ± 1.76 mm). The mean reduction of area of alveolar process and horizontal bone width were 18.89% (56.08 ± 44.23 mm2) and 65.10% (8.33 ± 4.51 mm), respectively. There was a marginal significant association between horizontal bone changes and the thickness of palatal bone (p = 0.05). The results of the present study indicated that following maxillary molar extraction, significant dimensional changes occur in both the vertical and horizontal directions. The vertical changes were mainly attributed to remodeling on the coronal aspect of the alveolar ridge and sinus pneumatization was rare.
Assuntos
Imageamento Tridimensional , Tomografia Computadorizada de Feixe Cônico Espiral , Processo Alveolar/diagnóstico por imagem , Tomografia Computadorizada de Feixe Cônico , Estudos Transversais , Humanos , Maxila/diagnóstico por imagem , Dente Molar/diagnóstico por imagemRESUMO
PURPOSE: To assess the accuracy of template-guided implant surgery for edentulous arches. MATERIALS AND METHODS: The stone master casts of 25 edentulous arches treated with either 4 or 6 implants with CBCT generated template-guided surgery were included in this observational cohort study. The stone casts generated from the surgical templates (group one) prior to implant placement were digitized into Standard Tesselation (STL) files with a reference scanner. For comparison, the stone master casts derived from intraoral complete-arch impressions after implant placement (group two) were also digitized. The resultant STL files were superimposed and best-fit-alignment algorithm was used to quantify the 3D deviations present between the two groups. Descriptive statistics were computed for all categorical variables. Due to the presence of nonindependent samples between maxillary and mandibular casts, a mixed-effects model was used. RESULTS: Deviations between the implant analogs of the stone casts representing digitally planned versus actually placed implants were found. The mean root-mean-square error (RMSE) between all 25 arches was found to be 0.2 mm (SD ± 0.15). The mean RMSE between presurgical and postsurgical maxillary stone casts were 0.19 ± 0.15 mm, while between mandibular stone casts were 0.21 ± 0.16 mm and were not significant (p = 0.67). The mean RMSE between presurgical and postsurgical stone casts arches with 4 versus 6 implants were found to be significant (p = 0.01). CONCLUSIONS: According to the results of the study and based on the amount of 3D deviations between the digitally planned implant positions and the actually placed implants, template-guided surgery is a safe treatment modality for implant placement in edentulous arches.
Assuntos
Implantes Dentários , Boca Edêntula , Cirurgia Assistida por Computador , Desenho Assistido por Computador , Técnica de Moldagem Odontológica , Humanos , Maxila/cirurgia , Boca Edêntula/cirurgiaRESUMO
The purpose of the present report is to illustrate a proof-of-concept protocol with the double digital scanning (DDS) technique for complete digital workflow in double full-arch implant rehabilitation. Two patients (4 restored arches) presented with hopeless dentitions and they were treated with a 4-appointment prosthodontic protocol and monolithic zirconia prostheses implementing a complete digital workflow. The outcomes are presented after clinical and radiographic observation for 2 years.
Assuntos
Implantes Dentários , Prótese Dentária Fixada por Implante , Desenho Assistido por Computador , Planejamento de Prótese Dentária , Humanos , Fluxo de Trabalho , ZircônioRESUMO
STATEMENT OF PROBLEM: Data on the accuracy of printed casts from complete-arch digital implant scans are lacking. PURPOSE: The purpose of this in vitro study was to compare the 3D accuracy of printed casts from a complete-arch digital implant intraoral scan with stone casts from conventional impressions. MATERIAL AND METHODS: An edentulous mandibular cast with 4 multiunit abutments with adequate anteroposterior spread was used as the master cast. Digital scans (n=25) were made by using a white light intraoral scanner (IOS). The generated standard tessellation language (STL) data sets were imported into a computer-assisted design (CAD) software program to generate complete-arch implant casts through 3D printing technology. The 25 printed casts and the mandibular master cast were further digitized by using a laboratory reference scanner (Activity 880; Smart Optics). These STL data sets were superimposed on the digitized master cast in a metrology software program (Geomagic Control X) for virtual analysis. The root mean square (RMS) error and the average offset were measured. RESULTS: When compared with the master cast, the printed casts had a mean ±standard deviation RMS error of 59 ±16 µm (95% CI: 53, 66). The maximum RMS error reached 98 µm. The average offsets were all negative, with a significant difference compared with zero (P<.001). CONCLUSIONS: The implant 3D deviations of the printed casts from complete-arch digital scans had statistically significant differences compared with those of the master cast but may still be within the acceptable range for clinical application.
Assuntos
Implantes Dentários , Técnica de Moldagem Odontológica , Desenho Assistido por Computador , Imageamento Tridimensional , Modelos Dentários , Impressão Tridimensional , Fluxo de TrabalhoRESUMO
PURPOSE: To analyse randomised controlled clinical trials (RCTs) and prospective cohort studies reporting on the survival and failure rates of functionally loaded short implants (SI) based on the actual length of time in function. MATERIALS AND METHODS: This meta-analysis was conducted according to PRISMA guidelines for systematic reviews. Electronic and manual searches were conducted to identify RCTs and prospective cohort studies reporting survival and complication rates of short dental implants (≤6 mm) based on the time in function. Secondary outcomes included the location (maxilla or mandible), type of restoration (single crown [SC] versus fixed dental prosthesis [FDP]) and marginal bone loss (MBL). RESULTS: A total of 20 studies (11 RCTs and 9 prospective) fulfilled the inclusion criteria and featured a total of 1238 SI placed in 747 patients. The overall (early and late) mean percentage of short implant failure was 4%. SI with up to 1-year follow-up presented failure rate of 2%, while SI followed up for >3 years showed a failure rate of 10%. SI restored with SC presented a late failure rate of 4% while SI restored with FPD 2%. The late failure rate did not differ in terms of location (maxilla or mandible) both with 3%. CONCLUSION: Short implants in function for more than 3 years presented higher failure rates compared to SI in function for <3 years. Splinting crowns supported by SIs in the posterior area should be considered. However, SI is a valid option for selected cases given their relatively high long-term survival rates.
Assuntos
Perda do Osso Alveolar , Implantes Dentários , Coroas , Implantação Dentária Endóssea , Planejamento de Prótese Dentária , Prótese Dentária Fixada por Implante , Falha de Restauração Dentária , Humanos , Estudos Prospectivos , Ensaios Clínicos Controlados Aleatórios como AssuntoRESUMO
PURPOSE: To report the rate of technical complications and prosthesis survival in a cohort of edentulous patients treated with implant-supported fixed complete dental prostheses (IFCDPs) after a mean observation period of at least 1 year. MATERIALS AND METHODS: The single-visit examination included clinical and radiographic assessment, occlusal analysis, photographs and questionnaire assessing patient satisfaction in a cohort of 52 patients rehabilitated with 71 IFCDPs (supported by 457 implants). The IFCDPs were assessed for technical complications, number of implants and cantilever extension, retention type and prosthetic material type. Comparison was made between ceramic IFCDPs (Group 1) and metal-resin IFCDPs (Group 2). Kaplan-Meier survival curve analysis was carried out for assessment of prosthesis survival and was done for both Groups 1 and 2 separately. The Cox proportional hazard model was used for survival analysis, adjusting for a number of potential confounders, to evaluate the association between prosthesis survival and several risk factors such as type of opposing occlusion, nightguard use, and presence of bruxism. Responses to patient satisfaction questions were compared with Fisher's exact test. RESULTS: Out of 71 edentulous arches (52 patients) restored with IFCDPs, 6 IFCDPs had failed, yielding a cumulative prosthesis survival rate of 91.6 % after a mean observation period of 5.2 years (range: 1-12 years) after definitive prosthesis insertion. Three IFCDPs were lost due to implant failures after 5.8 to 11 years of functional loading. Additionally, 3 metal-resin IFCDPs failed due to technical complications. Minor complications were the most frequent complications observed, namely wear of the prosthetic material (9.8% annual rate) being the most common, followed by decementation of cement-retained IFCDPs (2.9%), and loss of the screw access filing material of the screw-retained IFCDPs (2.7%). The most frequently observed major complication was fracture of the prosthetic material (1.9% annual rate), followed by fracture of occlusal screw (0.3%), and fracture of framework (0.3%). The annual rate of wear of prosthetic material was 7.3% for porcelain IFCDPs (n = 19/55) and 19.4% for metal-resin IFCDPs (n = 13/16), yielding a statistically significant difference between the 2 groups (p = 0.01). CONCLUSIONS: After a mean exposure time of 5.2 years, 91.6% prosthesis survival rates were achieved (65 out of 71 IFCDPs). The most frequent minor technical complication was wear of the prosthetic material with estimated 5-year rate of 49.0%, while the most frequent major complication was fracture of the prosthetic material with estimated 5-year dental unit-based rate of 9.5%. The cumulative rates for "prosthesis free of minor complications" at 5- and 10-years were 60.5% (95% CI: 47.2-71.3%) and 8.9% (95% CI: 2.9-18.0%), respectively. The cumulative rates for "prosthesis free of major technical complications" at 5- and 10-years were 85.5% (95% CI: 73.0-92.5%) and 30.1% (95% CI: 12.0-50.6%), respectively. Presence of bruxism, and absence of a nightguard were associated with increased risk for chipping of the prosthetic material of the IFCDPs.
Assuntos
Implantes Dentários , Prótese Dentária Fixada por Implante , Falha de Restauração Dentária , Seguimentos , Humanos , Falha de Prótese , Estudos RetrospectivosRESUMO
STATEMENT OF PROBLEM: Long-term clinical data on the survival of pressed lithium disilicate glass-ceramic restorations and the effect that different technical and clinical variables have on survival are lacking. PURPOSE: The purpose of this clinical study was to examine the 10-year survival of pressed lithium disilicate glass-ceramic restorations and the relationship between clinical parameters on outcomes. MATERIAL AND METHODS: Five hundred and fifty-six patients, ranging in age from 17 to 97 years, from a private clinical practice were enrolled. All participants required single-tooth replacement or repair in any area of the mouth, including single crowns, 3-unit fixed partial dentures, cantilevered anterior restorations, and foundation restorations. Together, the longevity of 1960 complete-coverage restorations was studied. Participants were offered the options of gold, conventional metal-ceramic, or lithium disilicate restoration. Participants who chose glass-ceramic restorations were included in the study. The overall survival of the glass-ceramic restorations was assessed by using clinical factors determined at recall, and the effect of various clinical parameters was evaluated by using Kaplan-Meier survival curves to account for attrition bias and other reasons for failure. The statistical significance of differences between parameters was determined using the log-rank test (α=.05). RESULTS: A total of 556 patients electing lithium disilicate restorations were evaluated. The mean age of patients at the time of restoration placement was 62 years, with a range of 17 to 97 years. Men comprised 39.5% of the patients, and women, 60.5%. Many patients required more than one restoration. Seven failures (bulk fracture or large chip requiring replacement) were recorded for the 1960 complete-coverage lithium disilicate restorations, with the average time of failure being 4.2 years. The total time at risk computed for the units was 5113 years, providing an estimated failure risk of 0.14% per year. The 10-year estimated cumulative survival was 99.6% (95% confidence : 99.4-99.8).The estimated cumulative survival rate of 1410 monolithic and 550 bilayered e.max complete-coverage restorations was 96.5% and 100%, respectively, at 10.4 and 7.9 years (P<.05). Seven failures were recorded for the monolithic complete-coverage restoration units placed. The total time at risk for these monolithic units was 3380 years, providing an estimated risk of 0.2% per year. Failures were primarily in molar teeth (5 of 7) and occurred in both arches (3/2). No failures were recorded for the bilayered complete-coverage restorations. The total time at risk computed for the bilayered units was 1733 years, providing an estimated risk of 0% per year. CONCLUSIONS: Pressed lithium disilicate restorations in this study survived successfully over the 10.4-year period studied with an overall failure rate below 0.2% per year and were primarily confined to molar teeth. The risk of failure at any age was minimal for both men and women.
Assuntos
Planejamento de Prótese Dentária , Falha de Restauração Dentária , Adolescente , Adulto , Idoso , Idoso de 80 Anos ou mais , Coroas , Porcelana Dentária , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Adulto JovemRESUMO
STATEMENT OF PROBLEM: Long-term outcomes with metal-ceramic (MC) implant-supported fixed complete dental prostheses (IFCDPs) are scarce. PURPOSE: The purpose of this retrospective study was to assess the rate of biologic and technical complications in a cohort of edentulous patients treated with MC IFCDPs by residents after a mean clinical follow-up of 5 years (range: 1 to 12 years). MATERIAL AND METHODS: Forty-one participants with 55 MC IFCDPs underwent a single-visit comprehensive examination that included a medical and dental history review and clinical and radiographic examinations. All supporting implants and prostheses were examined for biologic and technical complications. Life table analysis and Kaplan-Meier survival curves were calculated. RESULTS: Of 359 moderately rough surface dental implants, 2 had failed in 1 patient after 11 years of functional loading, yielding a cumulative implant survival rate of 99.4%. Owing to the implant failure, 1 of 55 edentulous arches restored with IFCDPs failed, yielding a cumulative prosthesis survival rate of 98.2% after mean observation period of 5.0 years. Soft tissue recession was the most frequent minor biologic complication (annual rate 7.8% at the prosthesis level) for both cement and screw-retained IFCDPs (group C and S), and peri-implantitis (annual rate 1.6% at the implant level) the most frequent major biologic complication. Wear of porcelain (annual rate 8.0% at the prosthesis level) was the most frequent minor technical complication for both groups, and fracture of porcelain (annual rate 0.8% at the dental-unit level) was the most frequent major technical complication. Minor complications were the most frequent in both the groups (cement and screw retained). CONCLUSIONS: High implant and prosthesis survival rates (above 98%) were achieved, yet substantial complication rates were encountered. The most frequent major biologic complication was peri-implantitis, with a 5-year implant-based rate of 8% (95% confidence interval [CI]: 5.8-11.1), whereas the most frequent major complication was fracture of porcelain with a 5-year dental unit-based rate of 4%. The estimated cumulative rates for "prosthesis free of biologic complications" were 50.4% (95% CI: 36.4% to 63.0%) at 5 years and 10.1% (95% CI: 3.5% to 20.8%) at 10 years, whereas for "prosthesis free of technical complications," they were 56.4% (95% CI: 41.7% to 68.8%) at 5 years and 9.8% (95% CI: 3.2% to 21.0%) at 10 years.
Assuntos
Implantes Dentários , Prótese Dentária Fixada por Implante , Estudos de Coortes , Falha de Restauração Dentária , Seguimentos , Humanos , Metais , Estudos Retrospectivos , Taxa de SobrevidaRESUMO
PURPOSE: To retrospectively assess complications and clinical and radiographic outcomes of edentulous patients treated with double full-arch implant-supported fixed complete dental prostheses (IFCDPs) after a mean observation period of 5.1 years. MATERIALS AND METHODS: The single-visit clinical and radiographic examination included medical and dental history review and clinical assessment of biologic and technical complications encountered with all implants and IFCDPs. Life table analysis and Kaplan-Meier survival curves were calculated. Analysis was conducted to evaluate the association between prosthesis survival and several risk factors such as type of opposing occlusion, nightguard use, and presence of bruxism. RESULTS: Nineteen edentulous patients restored with 38 IFCDPs were included. A total of 249 implants were placed and 2 implants failed after a mean observation period of 5.1 years (range: 1-12 years), yielding an overall implant survival rate of 99.2% and prosthesis survival rate of 92.1%. Three out of 38 IFCDPs were lost, 1 after implant losses and 2 due to technical complications. The most frequent minor biologic complication was soft tissue recession with an estimated 5-year rate of 45.5% (95% CI: 39.4-57.5), while the most frequent major complication was peri-implantitis with an estimated 5-year implant-based rate of 9.5% (95% CI: 6.7-11.3). The most frequent minor technical complication was wear of the prosthetic material with an estimated 5-year rate of 49.0% (95% CI: 37.4-76.4), while the most frequent major technical complication was fracture of the prosthetic material with an estimated 5-year dental unit-based rate of 8.0% (95% CI: 6.6-10.1). CONCLUSIONS: After a mean use time of 5.1 years, high implant and prosthesis survival rates were observed. The most frequent major biologic complication was peri-implantitis, and the most frequent major technical complication was fracture of the prosthetic material. The 5-year estimated cumulative rates for "prosthesis free of biologic complications" was 50.7% (95% CI: 33.7-65.4) and for "prosthesis free of technical complications" was 57.1% (95% CI: 39.3-71.5).
Assuntos
Implantes Dentários , Prótese Dentária Fixada por Implante , Falha de Restauração Dentária , Seguimentos , Humanos , Estudos RetrospectivosRESUMO
OBJECTIVES: The aim of Working Group 1 was to address the influence of different local (implant length, diameter, and design) and systemic (medications) factors on clinical, radiographic, and patient-reported outcomes in implant dentistry. Focused questions on (a) short posterior dental implants (≤6 mm), (b) narrow diameter implants, (c) implant design (tapered compared to a non-tapered implant design), and (d) medication-related dental implant failures were addressed. MATERIALS AND METHODS: Four systematic reviews were prepared in advance of the Consensus Conference and were discussed among the participants of Group 1. Consensus statements, clinical recommendations, and recommendations for future research were based on structured group discussions until consensus was reached among the entire expert Group 1. The statements were then presented and accepted following further discussion and modifications as required by the plenary. RESULTS: Short implants (≤6 mm) revealed a survival rate ranging from 86.7% to 100%, whereas standard implant survival rate ranged from 95% to 100% with a follow-up from 1 to 5 years. Short implants demonstrated a higher variability and a higher Risk Ratio [RR: 1.24 (95% CI: 0.63, 2.44, p = 0.54)] for failure compared to standard implants. Narrow diameter implants (NDI) have been classified into three categories: Category 1: Implants with a diameter of <2.5 mm ("Mini-implants"); Category 2: Implants with a diameter of 2.5 mm to <3.3 mm; Category 3: Implants with a diameter of 3.3 mm to 3.5 mm. Mean survival rates were 94.7 ± 5%, 97.3 ± 5% and 97.7 ± 2.3% for category 1, 2 and 3. Tapered versus non-tapered implants demonstrated only insignificant differences regarding clinical, radiographic, and patient-reported outcomes. The intake of certain selective serotonin reuptake inhibitors and proton pump inhibitors is associated with a statistically significant increased implant failure rate. The intake of bisphosphonates related to the treatment of osteoporosis was not associated with an increased implant failure rate. CONCLUSIONS: It is concluded that short implants (≤6 mm) are a valid option in situations of reduced bone height to avoid possible morbidity associated with augmentation procedures; however, they reveal a higher variability and lower predictability in survival rates. Narrow diameter implants with diameters of 2.5 mm and more demonstrated no difference in implant survival rates compared to standard diameter implants. In contrast, it is concluded that narrow diameter implants with diameters of less than 2.5 mm exhibited lower survival rates compared to standard diameter implants. It is further concluded that there are no differences between tapered versus non-tapered dental implants. Certain medications such as selective serotonin reuptake inhibitors and proton pump inhibitors showed an association with a higher implant failure rate.
Assuntos
Implantes Dentários , Planejamento de Prótese Dentária , Medidas de Resultados Relatados pelo Paciente , Consenso , Implantação Dentária Endóssea , Falha de Restauração Dentária , Difosfonatos/efeitos adversos , Humanos , Arcada Parcialmente Edêntula/reabilitação , Osteoporose/complicações , Osteoporose/tratamento farmacológico , Inibidores da Bomba de Prótons/efeitos adversos , Radiografia Dentária , Inibidores Seletivos de Recaptação de Serotonina/efeitos adversos , Análise de Sobrevida , Revisões Sistemáticas como AssuntoRESUMO
PURPOSE: To systematically review randomized controlled clinical trials (RCTs) reporting on the long-term survival and failure rates, as well as the complications of short implants (≤6 mm) versus longer implants (>6 mm) in posterior jaw areas. MATERIALS AND METHODS: Electronic and manual searches were conducted to identify studies, specifically RCTs, reporting on short dental implants (≤6 mm) and their survival and complication rates compared with implants longer than 6 mm. Secondary outcomes analyzed were marginal bone loss and prosthesis survival rates. RESULTS: Ten RCTs fulfilled the inclusion criteria and featured a total of 637 short (≤6 mm) implants placed in 392 patients, while 653 standard implants (>6 mm) were inserted in 383 patients. The short implant survival rate ranged from 86.7% to 100%, whereas standard implant survival rate ranged from 95% to 100% with a follow-up from 1 to 5 years. The risk ratio (RR) for short implant failure compared to standard implants was 1.29 (95% CI: 0.67, 2.50, p = 0.45), demonstrating that overall, short implants presented higher risk of failure compared to longer implants. The heterogeneity test did not reach statistical significance (p = 0.67), suggesting low between-study heterogeneity. The prosthesis survival rates from the short implant groups ranged from 90% to 100% and from 95% to 100% for longer implant groups, respectively. CONCLUSION: Short implants (≤6 mm) were found to have higher variability and lower predictability in survival rates compared to longer implants (>6 mm) after periods of 1-5 years in function. The mean survival rate was 96% (range: 86.7%-100%) for short implants, and 98% (range 95%-100%) for longer implants. Based on the quantity and quality of the evidence provided by 10 RCTs, short implants with ≤6 mm length should be carefully selected because they may present a greater risk for failure compared to implants longer than 6 mm.
Assuntos
Implantes Dentários , Planejamento de Prótese Dentária , Falha de Restauração Dentária/estatística & dados numéricos , Falha de Prótese , Perda do Osso Alveolar , Bases de Dados Factuais , Implantação Dentária Endóssea/efeitos adversos , Implantação Dentária Endóssea/instrumentação , Humanos , Ensaios Clínicos Controlados Aleatórios como Assunto , Análise de SobrevidaRESUMO
OBJECTIVES: To assess the rate of biologic complications and implant survival in edentulous patients treated with implant-supported fixed complete dental prostheses (IFCDPs) after a mean observation period of 5.2 years (range: 1-12 years). MATERIALS AND METHODS: A single-visit clinical and radiographic examination was performed to assess types and rates of biologic complications with ceramic IFCDPs (Group 1) and metal-resin IFCDPs (Group 2). RESULTS: Of 457 rough surface dental implants supporting 71 IFCDPs (52 patients), six had failed, yielding an implant survival rate of 98.7% after a mean observation period of 5.2 years after definitive prosthesis insertion. The most frequent minor biologic complication was soft tissue recession (7.7% annual rate), inflammation under the IFCDP (7.4% annual rate), and peri-implant mucositis (6.3% annual rate). The most frequent major biologic complication was peri-implantitis (2.0% annual rate), in 46/457 implants (10.1%) supporting 19 IFCDPs and late implant failure (0.3% annual rate). The frequency of biologic complications was not statistically different between Group 1 and Group 2. The presence of high plaque index had significant effect on bone loss. CONCLUSIONS: After a mean exposure time of 5.2 years postdefinitive prosthesis insertion (range: 1-12 years), implant survival rate of 98.7% was achieved. The six implant failures in three patients occurred after 5 years and affected the prosthesis survival. Soft tissue recession was the most frequent minor biologic complication, whereas peri-implantitis was the most frequent major biologic complication. A 10-year implant-based mucosal recession rate of 77% (95% CI: 68.2-87.9) and a 10-year implant-based peri-implantitis rate of 20% (95% CI: 16.9-24.9) were found.
Assuntos
Prótese Dentária Fixada por Implante/efeitos adversos , Falha de Restauração Dentária , Prótese Total/efeitos adversos , Planejamento de Prótese Dentária , Feminino , Seguimentos , Retração Gengival/etiologia , Humanos , Inflamação/etiologia , Arcada Edêntula , Masculino , Peri-Implantite/etiologia , Radiografia Panorâmica , Estudos RetrospectivosRESUMO
The purpose of this article is to report a digital workflow protocol for full-arch implant rehabilitation from guided surgery to final prosthesis in only three visits. This expedited protocol allows for implant placement with a surgical template generated from preoperative virtual planning and production of the CAD/CAM prosthodontic rehabilitation using a digital workflow. At the first visit, a guided implant placement protocol with the All-on-4 concept and immediate loading with the conversion prosthesis technique was done. At the same visit, final impression and interocclusal records, cast verification and mounting, as well as digital scanning of the conversion prosthesis were carried out. During the second visit, the framework try-in was performed. Lastly, the third visit included delivery of the final full-arch prosthesis opposed by a maxillary complete denture.
Assuntos
Desenho Assistido por Computador , Planejamento de Dentadura , Prótese Total , Idoso , Humanos , Masculino , Cirurgia Assistida por Computador , Fluxo de TrabalhoRESUMO
OBJECTIVES: The aim of this in vitro study was to compare the accuracy of printed implant casts from digital impressions with two intra-oral scanners (IOS) to stone casts from conventional impressions. The hypothesis was that printed casts would be more accurate than stone casts from conventional impressions. MATERIALS AND METHODS: A mandibular stone cast with Kennedy class II edentulism was fabricated using two internal connection tissue-level implants at 30 degrees to each other (Replace Select RP, Nobel Biocare) to serve as master. Digital impressions (n = 10) were made with the white light (WL) and Active Wavefront Sampling technology (AWST) IOS. The resultant standard tessellation language (STL) datasets were used to print implant casts through stereolithography (SLA) prototyping. The conventional casts (n = 10) were produced with splinted open tray impression technique and polyether material in type IV stone. The master cast and all groups were digitized with lab reference scanner. The test groups STL datasets were superimposed to master cast STL in inspection software (Geomagic control 2015) to calculate root-mean-square error. RESULTS: The conventional, WL IOS and AWST IOS groups had mean values of 53.49 µm (SD 9.47), 108.09 µm (SD 9.59) and 120.39 µm (SD 5.91), respectively. The Shapiro-Wilk test showed no evidence of nonnormality (p = 0.131) and Levene's test showed no evidence of heterogeneity of variance (p = 0.518). The one-way ANOVA demonstrated a statistically significant difference (p < 0.001). Tukey's honest significant difference (HSD) showed statistically significant differences between all groups: for the comparison of AWST IOS and WL IOS, the p-value was 0.009, and the p-values of the other post hoc tests were <0.001. CONCLUSION: Printed casts generated from digital impressions for partially edentulous posterior mandibular arches had inferior accuracy to conventional stone casts fabricated from splinted open tray impressions. The printed casts from WL IOS had better accuracy compared to AWST IOS.