Fabrication of 3D Polycaprolactone Macrostructures by 3D Electrospinning.

Building 3D electrospun macrostructures and monitoring the biological activities inside them are challenging. In this study, 3D fibrous polycaprolactone (PCL) macrostructures were successfully fabricated using in-house 3D electrospinning. The main factors supporting the 3D self-assembled nanofiber fabrication are the H3PO4 additives, flow rate, and initial distance. The effects of solution concentration, solvent, H3PO4 concentration, flow rate, initial distance, voltage, and nozzle speed on the 3D macrostructures were examined. The optimal conditions of 4 mL/h flow rate, 4 cm initial nozzle-collector distance, 14 kV voltage, and 1 mm/s nozzle speed provided a rapid buildup of cylinder macrostructures with 6 cm of diameter, reaching a final height of 16.18 ± 2.58 mm and a wall thickness of 3.98 ± 1.01 mm on one perimeter with uniform diameter across different sections (1.40 ± 1.10 µm average). Oxygen plasma treatment with 30-50 W for 5 min significantly improved the hydrophilicity of the PCL macrostructures, proving a suitable scaffold for in vitro cell cultures. Additionally, 3D images obtained by synchrotron radiation X-ray tomographic microscopy (SRXTM) presented cell penetration and cell growth within the scaffolds. This breakthrough in 3D electrospinning surpasses current scaffold fabrication limitations, opening new possibilities in various fields.

Streptomyces chiangmaiensis SSUT88A mediated green synthesis of silver nanoparticles: characterization and evaluation of antibacterial action against clinical drug-resistant strains.

This study involved the characterization of AgNPs synthesized from soil isolate Streptomyces sp. SSUT88A and their antimicrobial activities. The strain SSUT88A revealed 98.8% similarity of the 16s rRNA gene to Streptomyces chiangmaiensis TA4-1T. The AgNPs were synthesized by mixing either intracellular or extracellular cell-free supernatant of strain SSUT88A with AgNO3. The synthesized AgNPs from intracellular cell-free supernatant and extracellular cell-free supernatant were designated as IS-AgNPs and ES-AgNPs, respectively. The IS-AgNPs showed maximum absorbance of UV-vis spectra at 418 nm, while ES-AgNPs revealed maximum absorbance at 422 nm. The TEM observation of synthesized AgNPs revealed a spherical shape with an average diameter of 13.57 nm for IS-AgNPs and 30.47 nm for ES-AgNPs. The XRD and XANES spectrum profile of both synthesized AgNPs exhibited similar spectrum energy, which corresponded to AgNPs. The IS-AgNPs revealed antimicrobial activity against clinical isolate drug-resistant bacteria (Acinetobacter baumannii, Escherichia coli 8465, Klebsiella pneumoniae 1617, and Pseudomonas aeruginosa N90PS), while ES-AgNPs had no antimicrobial activity. When compared to commercial AgNPs, IS-AgNPs exhibited antibacterial efficacy against all clinical isolate bacteria including A. baumannii, one of the most threatening multi-drug resistant strains, while commercial AgNPs did not. Thus, IS-AgNPs has potential to be further developed as an antimicrobial agent against drug-resistant bacteria.

Effect of morpholine and charge distribution of cyanine dyes on cell internalization and cytotoxicity.

To improve the potency of Heptamethine cyanines (Hcyanines) in cancer research, we designed and synthesized two novel Hcyanines based theranostic probes, IR794-Morph and IR794-Morph-Mpip, to enhance cancer cell internalization and targeting. In acidic conditions that resemble to tumour environment, both IR794 derivatives exhibited broad NIR absorption band (704‒794 nm) and fluorescence emission (798‒828 nm) that is suitable for deep seated tumour imaging. Moreover, in vitro study revealed that IR794-Morph-Mpip exhibited better cancer targetability towards various cancer cell lines under physiological and slightly acidic conditions compared to normal cells. IR794-Morph-Mpip was fast internalized into the cancer cells within the first 5 min and mostly localized in lysosomes and mitochondria. In addition, the internalized signal was brighter when the cells were in the hypoxic environment. Furthermore, cellular uptake mechanism of both IR794 dyes, investigated via flow cytometry, revealed that endocytosis through OATPs receptors and clathrin-mediated endocytosis were the main routes. Moreover, IR794-Morph-Mpip, displayed anti-cancer activity towards all tested cancer cell types with IC50 below 7 µM (at 6 h incubation), which is approximately three times lower than that of the normal cells. Therefore, increasing protonated cites in tumour environment of Hcyanines together with incorporating morpholine in the molecule can enhance structure-inherent targeting of these dyes.

Fabrication of Piezoelectric Electrospun Termite Nest-like 3D Scaffolds for Tissue Engineering.

A high piezoelectric coefficient polymer and biomaterial for bone tissue engineering- poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)-has been successfully fabricated into 3D scaffolds using the wet electrospinning method. Three-dimensional (3D) scaffolds have significant advantages for tissue engineering applications. Electrospinning is an advanced method and can fabricate 3D scaffolds. However, it has some limitations and is difficult to fabricate nanofibers into 3D shapes because of the low controllability of porosity and internal pore shape. The PVDF-HFP powders were dissolved in a mixture of acetone and dimethylformamide with a ratio of 1:1 at various concentrations of 10, 13, 15, 17, and 20 wt%. However, only the solutions at 15 and 17 wt% with optimized electrospinning parameters can be fabricated into biomimetic 3D shapes. The produced PVDF-HFP 3D scaffolds are in the cm size range and mimic the structure of the natural nests of termites of the genus Apicotermes. In addition, the 3D nanofiber-based structure can also generate more electrical signals than the conventional 2D ones, as the third dimension provides more compression. The cell interaction with the 3D nanofibers scaffold was investigated. The in vitro results demonstrated that the NIH 3T3 cells could attach and migrate in the 3D structures. While conventional electrospinning yields 2D (flat) structures, our bio-inspired electrospun termite nest-like 3D scaffolds are better suited for tissue engineering applications since they can potentially mimic native tissues as they have biomimetic structure, piezoelectric, and biological properties.

A Near-Infrared Fluorescence Chemosensor Based on Isothiocyanate-Aza-BODIPY for Cyanide Detection at the Parts per Billion Level: Applications in Buffer Media and Living Cell Imaging.

A near-infrared chemodosimeter based on an aza-BODIPY dye was designed and synthesized. The sensor contains isothiocyanate groups for cyanide ion sensing. The sensing function was illustrated via the fluorescence changes in near-infrared frequencies as well as chromogenic changes which could be easily visualized with a detection limit of 19 ppb. The sensor provides high selectivity to CN- and discriminates other anions such as CH3 COO- , HPO4- , HSO4- , ClO3- , CO32- , SO42- , NO3- , Cl- , F- , Br- , I- , and phenylalanine (Phe) in 50 % PBS buffer/acetonitrile at physiological pH. The potential of the sensor for CN- detection in both aqueous buffer solutions and living cells imaging was demonstrated.

Coumarin Probe for Selective Detection of Fluoride Ions in Aqueous Solution and Its Bioimaging in Live Cells.

We have synthesized novel coumarin-based fluorescent chemosensors for detection of fluoride ions in aqueous solution. The detection mechanism relied on a fluoride-mediated desilylation triggering fluorogenic reaction and a strong interaction between fluoride and the silicon center. In this work, the hydroxyl-decorated coumarins containing oxysilyl moiety have been synthesized through the aldehyde-functionalized coumarins. The optical responses toward fluoride, as well as aqueous stability studies of both aldehyde and hydroxyl functionalized coumarins, have been investigated. Due to the highest fluorescence enhancement upon the addition of fluoride and good stability in aqueous solution, the hydroxyl-decorated coumarin connected with the bulky tert-butyldiphenyloxysilyl group (-OSitBuPh2) has been selected for further investigation of its potential as a fluoride sensor. This hydroxyl-decorated coumarin can selectively sense fluoride ions in aqueous media (contain 0.8% MeCN) with desirable response times (40 min). The limit of detection of this compound was determined as 0.043 ppm, satisfying the standard fluoride level (0.7 ppm) in drinking water recommended by U.S. Department of Health and Human Services. The application of this silyl-capped coumarin derivative for fluoride analysis in collected water samples displayed satisfactory analytical accuracy (<5% error). Finally, this compound was successfully employed in fluorescence bioimaging of fluoride ions in human liver cancer cells, indicating its excellent cell permeability, ability to retain inside the living cells, and good stability under physiological conditions.

Aza-BODIPY based polymeric nanoparticles for cancer cell imaging.

Near infrared (NIR) fluorescent dyes that are widely used for cancer imaging usually suffer from their hydrophobicity. To overcome this problem, a water-suspendable and biodegradable NIR-light-activating aza-BODIPY (AZB-NO2) encapsulated in polymeric nanoparticles was prepared as a new class of deep-tissue imaging agent. AZB-NO2 possesses an intense, broad NIR absorption band (600-800 nm) with a remarkably high fluorescent quantum yield. After being encapsulated with a biodegradable polycaprolactone (PCL) and a Kolliphor P188 surfactant by emulsification-solvent evaporation method, the AZB-NO2 formed a spherical shape as observed in scanning electron micrographs (SEM) with a hydrodynamic average size of 201 nm (average PDI = 0.185). The results from transmission electron micrographs (TEM) and energy dispersive X-ray spectroscopy (EDS) elemental mapping indicated that the AZB-NO2 homogeneously distributed in the polymeric shell. UV-visible-NIR and fluorescence spectra of the obtained nanoparticles, AZB-NO2@PCL, revealed that the nanoparticles prepared by using 0.8 mg dye loading exhibited the highest fluorescence quantum yield. These nanoparticles were then applied for fluorescence imaging in human glioblastoma cell line (U-251). After the cells were exposed to AZB-NO2@PCL, the materials appeared to be localized inside U-251 cells within 3 h and the fluorescence signal enhanced along with the increased incubation times. Moreover, 3D cell culture was used in this study to mimic in vivo tumor environments. The AZB-NO2@PCL exhibited bright fluorescence from U-251 cells inside 3D Ca-alginate scaffolds after 24 h incubation. Our study successfully demonstrated that the encapsulation of hydrophobic aza-BODIPY dye could enhance the water-suspendability of the dye yielding biocompatible nanoparticles efficiently used in cancer cell imaging applications.

Lupinifolin from Derris reticulata possesses bactericidal activity on Staphylococcus aureus by disrupting bacterial cell membrane.

In this study, lupinifolin, a prenylated flavonoid, was isolated from Derris reticulata stem, identified by NMR spectra and confirmed with mass spectrometry. Lupinifolin was freshly prepared by solubilizing in 0.1 N NaOH and immediately diluted in Müller-Hinton broth for antibacterial testing. The data showed that Gram-positive bacteria were more susceptible to lupinifolin than Gram-negative bacteria. Of four strains of Gram-positive bacteria tested, Staphylococcus aureus was the most susceptible. Using the two-fold microdilution method, it was found that lupinifolin possessed antimicrobial activity against S. aureus with minimum inhibitory concentration and minimum bactericidal concentration of 8 and 16 µg/ml, respectively, which is less potent than ampicillin. However, from the time-effect relationship, it was shown that lupinifolin had faster onset than ampicillin. The faster onset of lupinifolin was confirmed by scanning electron microscopy. To investigate the mechanism of action of lupinifolin, transmission electron microscopy (TEM) was performed to observe the ultrastructure of S. aureus. The TEM images showed that lupinifolin ruptured the bacterial cell membrane and cell wall. Due to its fast onset, it is suggested that the action of lupinifolin is likely to be the direct disruption of the cell membrane. This hypothesis was substantiated by the data from flow cytometry using DiOC2 as an indicator. The result showed that the red/green ratio which indicated bacterial membrane integrity was significantly decreased, similar to the known protonophore carbonyl cyanide 3-chlorophenylhydrazone. It is concluded that lupinifolin inhibits the growth of S. aureus by damaging the bacterial cytoplasmic membrane.

Human Embryonic Stem Cells: A Model for the Study of Neural Development and Neurological Diseases.

Although the mechanism of neurogenesis has been well documented in other organisms, there might be fundamental differences between human and those species referring to species-specific context. Based on principles learned from other systems, it is found that the signaling pathways required for neural induction and specification of human embryonic stem cells (hESCs) recapitulated those in the early embryo development in vivo at certain degree. This underscores the usefulness of hESCs in understanding early human neural development and reinforces the need to integrate the principles of developmental biology and hESC biology for an efficient neural differentiation.

Antioxidant, α-glucosidase inhibitory activity and sub-chronic toxicity of Derris reticulata extract: its antidiabetic potential.

BACKGROUND: Antidiabetic activity of Derris reticulata extract on alloxan-induced diabetic rats has been reported. The extract was found to lower blood glucose and inhibit intestinal glucose absorption. The aim of this study was to further investigate mechanisms underlying the antihyperglycemic activity of D. reticulata extract in vitro. METHODS: The aqueous extract was obtained from D. reticulata stem. Phytochemical screening, total phenolic, and flavanoid contents were examined. ABTS and DPPH scavenging assays, and FRAP method were used to determine in vitro antioxidant activities. Measurement of cell viability on alloxan-induced cellular damage was performed in the insulin-secreting RINm5F cells by MTT assay. The effects of the extract on α-glucosidase activity and insulin release were studied. In addition, sub-chronic toxicity test in rats was also conducted. RESULTS: The results revealed that the extract, which consisted of terpenoids, saponins, tannins and flavonoids, possessed moderate radical scavenging activities. Pre-treatment of RINm5F cells with the extract was also found to exert moderate, but significant, in vitro protection against alloxan, an oxidative stress producing agent. Unlike glibenclamide, the extract did not stimulate insulin secretion. However, the extract was found to inhibit α-glucosidase activity similar to acarbose. It was found that in sub-chronic toxicity studies D. reticulata extract did not cause mortality or produce any remarkable haematological, biochemical and histopathological adverse effects in rats. CONCLUSIONS: The data suggest that the possible mechanisms underlying antihyperglycemic activity of D. reticulata extract are cytoprotective effect on pancreatic cells, presumably by its antioxidant activity, and inhibition of α-glucosidase. Sub-chronic toxicity study also provides scientific evidence to corroborate the safety of this plant as an alternative antidiabetic agent.

In vitro biocompatibility of schwann cells on surfaces of biocompatible polymeric electrospun fibrous and solution-cast film scaffolds.

The in vitro responses of Schwann cells (RT4-D6P2T, a schwannoma cell line derived from a chemically induced rat peripheral neurotumor) on various types of electrospun fibrous scaffolds of some commercially available biocompatible and biodegradable polymers, i.e., poly(3-hydroxybutyrate) (PHB), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), polycaprolactone (PCL), poly(l-lactic acid) (PLLA), and chitosan (CS), were reported in comparison with those of the cells on corresponding solution-cast film scaffolds as well as on a tissue-culture polystyrene plate (TCPS), used as the positive control. At 24 h after cell seeding, the viability of the attached cells on the various substrates could be ranked as follows: PCL film > TCPS > PCL fibrous > PLLA fibrous > PHBV film > CS fibrous approximately CS film approximately PLLA film > PHB film > PHBV fibrous > PHB fibrous. At day 3 of cell culture, the viability of the proliferated cells on the various substrates could be ranked as follows: TCPS > PHBV film > PLLA film > PCL film > PLLA fibrous > PHB film approximately PCL fibrous > CS fibrous > CS film > PHB fibrous > PHBV fibrous. At approximately 8 h after cell seeding, the cells on the flat surfaces of all of the film scaffolds and that of the PCL nanofibrous scaffold appeared in their characteristic spindle shape, while those on the surfaces of the PHB, PHBV, and PLLA macrofibrous scaffolds also appeared in their characteristic spindle shape, but with the cells being able to penetrate to the inner side of the scaffolds.