RESUMO
To address the challenges posed by computational resource consumption and data volume in the development of large-aperture metalenses, a design method for concentric-ring metalens based on two-dimensional unit splicing is proposed in this paper. In the method, the unit structure library is constructed through global traversal under the machining process constraints. The phase matching is performed for two polarization states with specific weights and the design of binary-height, concentric-ring structures with arbitrary polarization sensitivity is realized, whose focusing efficiency (the encircled power within 3×FWHM of the focal spot divided by the near-field outgoing power) is up to 90%. Based on this method, a polarization-insensitive metalens with a design wavelength of 10µm, diameter of 2â cm, and numerical aperture of 0.447 is obtained. The method combines the advantages of lower computation requirements for a building block array of a metalens and lower structure data for a concentric-ring metalens. Consequently, it becomes possible to reduce calculation and processing costs by several orders of magnitude during the development process of metalenses with diameters ranging from 103 to 105 wavelengths. The resulting focusing efficiency can approach the upper limit achievable through global structural optimization and significantly surpass that of binary-height Fresnel lenses.
RESUMO
MAIN CONCLUSION: Spatial organization and connectivity of wood rays in Pinus massoniana was comprehensively viewed and regarded as anatomical adaptions to ensure the properties of rays in xylem. Spatial organization and connectivity of wood rays are essential for understanding the wood hierarchical architecture, but the spatial information is ambiguous due to small cell size. Herein, 3D visualization of rays in Pinus massoniana was performed using high-resolution µCT. We found brick-shaped rays were 6.5% in volume fractions, nearly twice the area fractions estimated by 2D levels. Uniseriate rays became taller and wider during the transition from earlywood to latewood, which was mainly contributed from the height increment of ray tracheids and widened ray parenchyma cells. Furthermore, both volume and surface area of ray parenchyma cells were larger than ray tracheids, so ray parenchyma took a higher proportion in rays. Moreover, three different types of pits for connectivity were segmented and revealed. Pits in both axial tracheids and ray tracheids were bordered, but the pit volume and pit aperture of earlywood axial tracheids were almost tenfold and over fourfold larger than ray tracheids. Contrarily, cross-field pits between ray parenchyma and axial tracheids were window-like with the principal axis of 31.0 µm, but its pit volume was approximately one-third of axial tracheids. Additionally, spatial organization of rays and axial resin canal was analyzed by a curved surface reformation tool, providing the first evidence of rays close to epithelial cells inward through the resin canal. Epithelial cells had various morphologies and large variations in cell size. Our results give new insights into the organization of radial system of xylem, especially the connectivity of rays with adjacent cells.
Assuntos
Pinus , Madeira , Madeira/metabolismo , Pinus/metabolismo , XilemaRESUMO
Metalens, composed of arrays of nano-posts, is an ultrathin planar optical element used for constructing compact optical systems which can achieve high-performance optical imaging by wavefront modulating. However, the existing achromatic metalenses for circular polarization possess the problem of low focal efficiency, which is caused by the low polarization conversion efficiencies of the nano-posts. This problem hinders the practical application of the metalens. Topology optimization is an optimization-based design method that can effectively extend the degree of design freedom, allowing the phases and polarization conversion efficiencies of the nano-posts to be taken into account simultaneously in the optimization procedures. Therefore, it is used to find geometrical configurations of the nano-posts with suitable phase dispersions and maximized polarization conversion efficiencies. An achromatic metalens has a diameter of 40 µm. The average focal efficiency of this metalens is 53% in the spectrum of 531 nm to 780 nm by simulation, which is higher than the previously reported achromatic metalenses with average efficiencies of 20~36%. The result shows that the introduced method can effectively improve the focal efficiency of the broadband achromatic metalens.