The subcoracoid distance is correlated with pain and internal rotation after reverse shoulder arthroplasty.

Background: A proposed etiology of anterior shoulder pain and limited internal rotation after reverse shoulder arthroplasty (RSA) is impingement of the humeral component on the coracoid or conjoint tendon. The primary goal of this study was to investigate radiographic surrogates for potential coracoid or conjoint tendon impingement and their relationship to postoperative pain and internal rotation after RSA. Methods: A retrospective review of a clinical registry was performed to identify patients with (1) primary RSA, (2) minimum 2-year clinical follow-up, and (3) satisfactory postoperative axillary lateral radiographs. The primary radiographic measurement of interest was the subcoracoid distance (SCD), defined as the distance between the posterior aspect of the coracoid and the anterior glenosphere. Additional measurements were as follows: anterior glenosphere overhang, posterior glenosphere overhang, native glenoid width, lateralization of glenosphere relative to the coracoid tip, lateralization shoulder angle, and distalization shoulder angle. The primary clinical outcome of interest was the 2-year postoperative Visual Analog Scale score. Secondary outcomes were (1) internal rotation (IR) defined by spinal level (IRspine), (2) IR at 90 degrees of abduction, (3) American Shoulder and Elbow Surgeons score, (4) forward flexion, and (5) external rotation at 0 degrees of abduction. Linear regression analyses were used to evaluate the relationship of the various radiographic measures on the clinical outcomes of interest. Results: Two hundred seventeen patients were included. There was a statistically significant relationship between the SCD and Visual Analog Scale scores: B = -0.497, P = .047. There was a statistically significant relationship between the SCD and IRspine: B = -1.667, P < .001. Metallic lateralization was also positively associated with improving IRspine; increasing body mass index was negatively associated. There was a statistically significant relationship between the SCD and IR at 90 degrees of abduction: B = 5.844, P = .034. Conclusion: For RSA with a 135° neck shaft angle and lateralized glenoid, the postoperative SCD has a significant association with pain and IR. Decreasing SCD was associated with increased pain and decreased IR, indicating that coracoid or conjoint tendon impingement may be an important and potentially under-recognized etiology of pain and decreased IR following RSA. Further investigations aimed toward identifying a critical SCD to improve pain and IR may allow surgeons to preoperatively plan component position to improve clinical outcomes after RSA.

Rates of subacromial notching are low following reverse shoulder arthroplasty with a 135° inlay humeral component and a lateralized glenoid.

Background: Lateralization in reverse shoulder arthroplasty (RSA) decreases bony impingement and improves rotational range of motion, but has been theorized to increase the risk of subacromial notching (SaN). The purpose of this study was to evaluate the presence of SaN following RSA and its relationship with lateralization with a 135° inlay humeral component. The secondary purpose was to assess the association of SaN with functional outcomes. Methods: A retrospective review was performed from a multicenter prospectively collected database on patients who underwent primary RSA from 2015 to 2021. All RSAs were performed with a 135° inlay humeral component. SaN was defined as bony erosion with sclerotic margins on the undersurface of the acromion on final follow-up radiographs not present preoperatively. Postoperative implant positioning (inclination, distalization, and lateralization) were evaluated on minimum 1-year postoperative radiographs. Regression analyses were performed on implant and clinical variables to assess for risk factors. A separate analysis was performed to determine the association of SaN with clinical outcomes. Results: SaN was identified in 13 out of 442 shoulders (2.9%). Age, sex, body mass index, smoking status, diabetes mellitus, arm dominance had no relationship with SaN. Neither glenoid sided lateralization nor humeral offset were associated with SaN risk. Other implant characteristics such as distalization, glenosphere size, and postoperative inclination did not influence SaN risk. The presence of SaN did not affect patient-reported outcomes (American Shoulder and Elbow Surgeons: P = .357, Visual Analog Scale: P = .210) or range of motion. Conclusion: The rate of SaN is low and not associated with glenoid or humeral prosthetic lateralization when using a 135° inlay humeral component. When SaN occurs, it is not associated with functional outcomes or range of motion at short-term follow-up.

Novel 3D MRI-Based Volumetric Assessment of Rotator Cuff Musculature Demonstrates Stronger Correlation with Preoperative Functional Status When Compared to the Goutallier Grading Scheme.

BACKGROUND: The Goutallier classification (GC) is used to assess fatty atrophy in rotator cuff (RC) tears, yet limitations exist. A battery of 3D-magnetic resonance imaging (MRI) volumetric scores (VS) was developed to provide comprehensive characterization of RC pathology. The purposes of this study were to: (1) Describe the correlation between GC and VS for supraspinatus changes in RC tears, (2) Characterize the chronicity of RC tears using the battery of 12 VS measurements, and (3) Compare GC and VS to determine which method most closely corresponds with preoperative patient reported outcome measures (PROMs). METHODS: Preoperative shoulder MRIs were reviewed after arthroscopic RC repair. Preoperative GC stage and Patient-Reported Outcomes Measurement Information System (PROMIS) physical function (PF) and pain interference (PI) scores were collected. The battery of VS included fat infiltration (FIS), muscle size (MSS) and relative volume contribution (RCS) for each RC muscle. Backwards linear regression was performed to compare GC stage with preoperative PROMIS PF/PI to determine which VS measurement most closely correlated with preoperative PROMs. RESULTS: Eighty-two patients underwent RC repair (mean age 55±8.2 years, 63% male, 68% GC stage ≤1). In evaluation of the supraspinatus, there was a moderate positive correlation between GC and FIS (r = 0.459, p < 0.001); strong negative correlations were observed between MSS (r = -0.800, p < 0.001) and RCS (r = -0.745, p < 0.001) when compared to GC. A negligible linear correlation was observed between GC and preoperative PROMIS PF (r = -0.106, p = 0.343) and PI (r = -0.071, p = 0.528). On multivariate analysis, subscapularis MSS (beta > 0, p = 0.064) was a positive predictor, and subscapularis FIS (beta < 0, p = 0.137), teres minor MSS (beta < 0, p = 0.141) and FIS (beta < 0, p = 0.070) were negative predictors of preoperative PF (r = 0.343, p = 0.044); while supraspinatus MSS (beta > 0, p = 0.009) and FIS (beta > 0, p = 0.073), teres minor FIS (beta > 0, p = 0.072) and subscapularis FIS (beta > 0, p = 0.065) were positive predictors of preoperative PI (r = 0.410, p = 0.006). CONCLUSION: Although gold standard in evaluation of RC pathology, GC demonstrated negligible correlation with preoperative functional disability. Alternatively, a battery of 3D VS showed strong correlation with GC through a quantitative, comprehensive evaluation of the RC unit including several moderate predictors of preoperative functional disability.

A two-year comparison of reverse total shoulder arthroplasty mini-humeral tray and augmented mini-glenoid baseplate implants vs. standard implants.

BACKGROUND: Patients who undergo reverse total shoulder arthroplasty (RTSA) are getting younger with greater function expectations. This retrospective, longitudinal study of prospectively collected data compared perceived shoulder function and strength, active shoulder mobility, radiographic evidence of scapular notching, and implant survival over the initial 2-years post-RTSA among patient groups who received either standard central fixation point liner and glenoid baseplate implants, or lower size profile mini-humeral tray with offset trunnion options and mini-augmented glenoid baseplate implants. MATERIALS AND METHODS: Patients who underwent primary RTSA using standard central fixation point liner and glenoid baseplate implants (Group 1, n = 180) were compared with patients who underwent primary RTSA using lower size profile mini-humeral tray with offset trunnion options and mini-augmented glenoid baseplate implants (Group 2, n = 53) for active shoulder mobility, American Shoulder and Elbow Surgeons (ASES) score, perceived ability to lift 10 lbs (4.5 kg) overhead, radiographic evidence of scapular notching, and implant survival. Data was collected pre-surgery, 6-weeks, 6-months, 1-year, and 2-years post-RTSA (p ≤ 0.05). RESULTS: More Group 2 patients had more complex B or C Walch glenoid morphology, while Group 1 had more A1 or A2 types (p ≤ 0.001). Group 2 had greater active shoulder flexion at 6-months, 1-year, and 2-years (p ≤ 0.018) and external rotation (in adduction) at 6-months and 2-years (p ≤ 0.004) compared to Group 1, with higher ASES scores at 6-months and 2-years (p ≤ 0.026) (with small-to-medium effect sizes), and with more patients meeting or exceeding the minimal clinically important difference (MCID) at 2-years (p = 0.045) and patient acceptable symptomatic state (PASS) levels at 6-months, 1-year and 2-years (p ≤ 0.045). Scapular notching was identified in six of 53 (11.3%) Group 2 patients and in 32 of 180 (17.7%) Group 1 patients. Group 1 patients had more grade 2 or greater scapular notching grades compared to Group 2 (p = 0.04). Implant survival was comparable with Group 1 = eight of 180 (4.4%) and Group 2 = 1 of 53 (1.9%) of patients requiring removal for 95.6% and 98.1% implant survival, respectively. CONCLUSION: Limited scapular notching and excellent implant survival was observed in both groups. Despite including individuals with more complex glenoid deficiency, patients receiving the lower size profile implants generally displayed better active shoulder mobility and perceived shoulder function compared to those who received standard implants. These patients also more frequently met or exceeded the MCID by 2-years post-RTSA and PASS levels by 6-months, 1-year, and 2-years post-RTSA, with lower scapular notching grades. LEVEL OF EVIDENCE: Retrospective comparative study.

Posteroinferior Glenosphere Positioning is Associated with Improved Range of Motion Following Reverse Shoulder Arthroplasty with a 135° Inlay Humeral Component and Lateralized Glenoid.

BACKGROUND: Optimal glenosphere positioning in a lateralized reverse shoulder arthroplasty (RSA) to maximize functional outcomes has yet to be clearly defined. Center of rotation (COR) measurements have largely relied on AP radiographs which allow assessment of lateralization and inferior position, but ignore scapular Y radiographs which may provide an assessment of posterior and inferior position relative to the acromion. The purpose of this study was to evaluate the COR in the sagittal plane and assess the effect of glenosphere positioning with functional outcomes utilizing a 135° inlay stem with a lateralized glenoid. METHODS: A retrospective review was performed on a prospectively maintained multicenter database on patients who underwent primary RSA from 2015-2021 with a 135° inlay stem. The COR was measured on minimum 2-year postoperative sagittal plain radiographs using a perfect-circle fit method. A perfect circle was made on the glenosphere and the center was marked. From there, four measurements were made: 1) center to the inner cortex of the coracoid, 2) center to the inner cortex of the anterior acromion, 3) center to the inner cortex of the middle acromion, 4) center to the inner cortex of the posterior acromion. Regression analysis was performed to evaluate any association between the position of the COR relative to bony landmarks with functional outcomes. RESULTS: A total of 136 RSAs met the study criteria. There was no relation with any of the distances with outcome scores (ASES, VAS). In regards to range of motion (ROM), each distance had an effect on at least one parameter. The COR to coracoid distance had the broadest association with ROM with improvements in forward flexion (FF), external rotation (ER0), and internal rotation with arm at 90° (IR90) (p = <0.001, 0.031, <0.001; respectively). The COR to coracoid distance was also the only distance to affect the final FF and IR90. For every 1 mm increase in this distance, there was a 1.8° increase in FF and 1.5° increase in IR90 (ß = 1.78; 95% CI 0.85 - 2.72, p = <0.001, ß = 1.53; 95% CI 0.65 - 2.41, p = <0.001; respectively). CONCLUSION: Evaluating the COR following RSA in the sagittal plane suggests that posteroinferior glenosphere position may improve ROM when using a 135° inlay humeral component and a lateralized glenoid.

Stemless anatomic total shoulder arthroplasty is associated with less early postoperative pain.

Background: Improvements in pain control after shoulder arthroplasty with a reduction in narcotic use continues to be an important postoperative goal. With the increased utilization of stemless anatomic total shoulder arthroplasty (aTSA), it is relevant to compare between stemmed and stemless arthroplasty to assess if there is any association between this implant design change and early postoperative pain. Methods: Patients from a multicenter, prospectively-maintained database who had undergone a stemless aTSA with a minimum of two year clinical follow-up were retrospectively identified. Patients who underwent aTSA with a short stem were identified in the same registry, and matched to the stemless aTSA patients by age, sex and preoperative pain score. The primary study outcome was the Visual Analog Scale pain score. Secondary pain outcomes were the American Shoulder and Elbow Surgeons shoulder pain subscore, Western Ontario Osteoarthritis of the Shoulder physical symptoms subscore, and the Single Assessment Numeric Evaluation score. Finally, the percentage of patients who could sleep on the affected shoulder was assessed for each group. These pain-related clinical outcomes were assessed and compared preoperatively, and postoperatively at 9 weeks, 26 weeks, one year and two years. For all statistical comparisons, P > .05 was considered significant. Results: 124 patients were included in the study; 62 in each group. At 9 weeks after surgery, statistically significantly improved pain control was reported by patients undergoing stemless aTSA, as assessed by the Visual Analog Scale (stemless: 1.5, stemmed: 2.5, P = .001), American Shoulder and Elbow Surgeons pain subscore (stemless: 42.4, stemmed: 37.3, P < .001), Western Ontario Osteoarthritis of the Shoulder Physical Symptoms (stemless: 80.3, stemmed: 73.1, P = .006) and Single Assessment Numeric Evaluation (stemless: 58.1, stemmed: 47.4, P = .011). Patients who underwent a stemless aTSA were significantly more likely to be able to sleep on the affected shoulder at 9 weeks (29% vs. 11%, odds ratio 3.2, 95% confidence interval 1.2-8.4, P = .014). By 26 weeks postoperatively, there were no differences in all pain-specific outcomes. At two years postoperatively, patient-reported outcomes, range of motion, and strength measures were all similar between the two cohorts. Conclusion: Stemless aTSA provides earlier improvement in postoperative shoulder pain compared to matched patients undergoing short-stem aTSA. Additionally, earlier return to sleeping on the affected shoulder was reported in the stemless aTSA group. The majority of these differences dissipate by 26 weeks postoperatively and there were no differences in pain, patient-reported outcomes, range of motion or strength measures between stemless and short-stem aTSA at 2 years postoperatively.

Obesity is associated with improvement in functional outcome but lower internal rotation after reverse shoulder arthroplasty.

Background: The role of obesity as an independent risk factor for increased complications following reverse shoulder arthroplasty (RSA) continues to generate debate. While no standardized body mass index (BMI) cutoff values for shoulder arthroplasty exist, many surgeons are concerned about the potential for poor outcomes and decreased range of motion (ROM) in patients with a high BMI. The purpose of this study was to compare functional outcomes in obese and nonobese patients preoperatively and at short-term follow-up after RSA. Methods: A retrospective review was performed of a prospectively maintained, multicenter database of primary RSAs performed by 14 surgeons between 2015 and 2019 with minimum 2-year follow-up. A total of 245 patients met the study criteria, including 111 obese (BMI >30) and 134 nonobese (BMI <30) patients. Patient-reported outcomes (PROs) as well as ROM measurements were compared between the 2 groups. Results: At baseline, obese patients had significantly lower American Shoulder and Elbow Surgeons (36.6 vs. 42.0, P = .014), Western Ontario Osteoarthritis of the Shoulder scores (33.1 vs. 37.8, P = .043), external rotation at 90° (19° vs. 28°, P = .007), internal rotation (IR) spinal level (L5 vs. L4, P = .002), and belly press strength (P = .003) compared to the nonobese cohort. There were no statistical differences in 2-year outcomes (PROs, ROM, and strength) other than a worse IR (spinal level) in the low BMI group (L4 vs. L3, P = .002). In linear regression analyses controlling for confounding variables, increasing BMI was negatively correlated with preoperative external rotation (B = -0.591, P = .034) and preoperative IR spinal level (B = 0.089, P = .002). Increasing BMI was not correlated with postoperative external rotation at 90° (B = 0.189, P = .490) but was associated with worse postoperative IR by spinal level (B = 0.066, P = .043). Conclusions: Obese patients have greater restrictions in external and internal rotation as well as American Shoulder and Elbow Surgeons and Western Ontario Osteoarthritis of the Shoulder scores at baseline prior to RSA. However, there are no major differences in postoperative PROs or ROM measurements between obese and nonobese patients apart from a worse active IR by spinal level in the obese group (L4 vs. L3, P = .002). This study suggests that an RSA procedure does not need to be restricted solely based on BMI.

Robert H. Cofield, MD, Award for Best Oral Presentation 2023: Up to 8 mm of glenoid-sided lateralization does not increase the risk of acromial or scapular spine stress fracture following reverse shoulder arthroplasty with a 135° inlay humeral component.

BACKGROUND: Glenoid-sided lateralization in reverse shoulder arthroplasty (RSA) decreases bony impingement and improves rotational range of motion, but has been theorized to increase the risk of acromial or scapular spine fractures (ASFs). The purpose of this study was to assess if glenoid-sided lateralization even up to 8 mm increases the risk for stress fracture following RSA with a 135° inlay humeral component. METHODS: A retrospective review was performed from a multicenter prospectively collected database on patients who underwent primary RSA from 2015 to 2021. All RSAs were performed with a 135° inlay humeral component. Varying amounts of glenoid lateralization were used from 0 to 8 mm. Preoperative radiographs were reviewed for the presence of acromial thinning, acromiohumeral distance (AHD), and inclination. Postoperative implant position (distalization, lateralization, and inclination) as well as the presence of ASF was evaluated on minimum 1-year postoperative radiographs. Regression analyses were performed on component and clinical variables to assess for factors predictive of ASF. RESULTS: Acromial or scapular spine fractures were identified in 26 of 470 shoulders (5.5%). Glenoid-sided lateralization was not associated with ASF risk (P = .890). Furthermore, the incidence of fracture did not vary based on glenoid-sided lateralization (0-2 mm, 7.4%; 4 mm, 5.6%; 6 mm, 4.4%; 8 mm, 6.0%; P > .05 for all comparisons). RSA on the dominant extremity was predictive of fracture (odds ratio [OR] 2.21, 95% confidence interval [CI] 1.20-5.75; P = .037), but there was no relationship between patient age, sex, preoperative acromial thinning, or diagnosis and risk of fracture. Although there was no difference in mean postoperative AHD between groups (P = .443), the pre- to postoperative delta AHD was higher in the stress fracture group (2.0 ± 0.7 cm vs. 1.7 ± 0.7 cm; P = .015). For every centimeter increase in delta AHD, there was a 121% increased risk for fracture (OR 2.21, 95% CI 1.33-3.68; P = .012). Additionally, for every 1-mm increase in inferior glenosphere overhang, there was a 19% increase in fracture risk (P = .025). CONCLUSION: Up to 8 mm of glenoid-sided metallic lateralization does not appear to increase the risk of ASF when combined with a 135° inlay humeral implant. Humeral distalization increases the risk of ASF, particularly when there is a larger change between pre- and postoperative AHD or higher inferior glenosphere overhang. In cases of pronounced preoperative superior humeral migration, it may be a consideration to avoid excessive postoperative distalization, but minimizing bony impingement via glenoid-sided lateralization appears to be safe.

Evaluation of Achilles Tendon Stiffness as Measured by Shear Wave Elastography in Female College Athletes Compared With Nonathletes.

BACKGROUND: We sought to utilize a noninvasive technology to assess the effects of activity on Achilles tendon stiffness and define baseline Achilles tendon stiffness in female college athletes compared with nonathletes using tendon shear wave velocity as a marker for tendon stiffness. HYPOTHESIS: Training status and exercise may affect Achilles tendon stiffness. LEVEL OF EVIDENCE: Level 4. METHODS: A total of 32 college-age female athletes were prospectively enrolled (n = 17 varsity athletes and n = 15 nonathletes). Demographic characteristics, activity level, and previous injuries were recorded. Sonographic shear wave elastography (SWE) was used to assess Achilles tendon shear wave velocity bilaterally for all subjects, both at baseline and after 2 minutes of exercise. Student t tests were used to compare the mean elastography measurements between participants stratified by athlete status and pre/postexercise stimulus. Analysis of variance (ANOVA) was used to compare the mean proximal, middle, and distal Achilles tendon elastography measurements. RESULTS: As seen by a greater mean shear wave velocity (8.60 ± 1.58 m/s vs 8.25 ± 1.89 m/s; P = 0.02), athletes had stiffer tendons than nonathletes. Exercise stimulus decreased average tendon shear wave velocity (8.57 ± 1.74 m/s vs 8.28 ± 1.72 m/s; P = 0.05). Tendon shear wave velocity was greatest proximally and least distally with significant differences between each region (P < 0.001). In addition, there was a significant 2-way interaction between weekly training status and foot dominance (P = 0.01). Post hoc analysis showed that this result was due to differences in tendon shear wave velocity between the dominant and nondominant lower extremity in nonathletes (7.73 ± 2.00 m/s vs 8.76 ± 1.62 m/s; P < 0.001). CONCLUSION: Female varsity collegiate athletes have higher baseline Achilles tendon stiffness as measured by SWE compared with nonathletes. Mean tendon stiffness varies based on Achilles measurement location. SWE is a quick, cost-effective, and noninvasive imaging modality that can be used to evaluate tendon stiffness and elasticity. CLINICAL RELEVANCE: SWE is an efficient and noninvasive imaging modality that can evaluate dynamic tendon stiffness and elasticity. SWE may be helpful to assess injuries in female college athletes and may play a role in risk stratification or clinical follow-up. In theory, SWE could be used to identify athletes with increased elasticity as a marker for potential risk for rupture in this population.

Mini-augmented glenoid baseplate and mini-humeral tray reverse total shoulder arthroplasty implant comparisons: two-year clinical outcomes.

BACKGROUND: Augmented glenoid baseplate and offset humeral tray reverse total shoulder arthroplasty (RTSA) implants may decrease the mechanical impingement that creates scapular notching and improve shoulder function. This study evaluated the clinical efficacy of three different RTSA glenoid baseplate and offset humeral tray combinations for patient-reported shoulder function, pain and instability, radiographic imaging evidence of glenoid baseplate or humeral stem subsidence and migration, bony changes associated with implant loosening, and scapular notching over the initial 2 years post-RTSA. Primary outcomes included active shoulder mobility, perceived function, pain, instability, scapular notching, and implant survival. METHODS: Sixty-seven patients from 6 research sites received one of three different glenoid baseplate and humeral tray combinations. Group 1 (n = 21) received a mini-augmented glenoid baseplate with a standard humeral tray; Group 2 (n = 23) received a standard glenoid baseplate and a mini-humeral tray with 3 trunnion offset options; Group 3 (n = 23) received both a mini-augmented glenoid baseplate and a mini-humeral tray with 3 trunnion offset options. Subjects underwent radiologic evaluation, completed the ASES scale, the EQ-5D-5L quality of life scale, VAS shoulder pain and instability questions, and active shoulder mobility measurements pre-operatively, and 6-weeks, 6-months, 1-2 years post-RTSA. RESULTS: Improved active shoulder mobility, quality of life, perceived function, decreased shoulder pain and instability, excellent implant survival and minimal scapular notching were observed for all groups. Group 3 had better overall active shoulder mobility than the other groups and better perceived function than Group 1. CONCLUSION: The group that received the mini-augmented glenoid baseplate and mini-humeral tray combination had better overall active shoulder flexion, external rotation at 90° abduction, and internal rotation. This group also had better perceived shoulder function compared to the group that received a mini-augmented glenoid baseplate with a standard humeral tray.

Influence of backside seating parameters and augmented baseplate components in virtual planning for reverse shoulder arthroplasty.

BACKGROUND: The primary goal of this investigation was to examine the influence of a backside seating percentage variable on volume of reamed bone and contact area in virtual planning for glenoid baseplate placement for reverse total shoulder arthroplasty (RTSA). The secondary goal was to assess how the option of augmented glenoid baseplate components affected reamed volume and cortical contact area of virtually positioned baseplates. METHODS: Nine surgeons virtually planned 30 RTSA cases using a commercially available software system. The 30 cases were chosen to span a spectrum of glenoid deformity. The study consisted of 3 phases. In phase 1, cases were planned with the backside seating percentage blinded and without the option of augmented baseplate components. In phase 2, the backside seating parameter was unblinded. In phase 3, augmented baseplate components were added as an option. Implant version and inclination were recorded. By use of computer-assisted design models, total volume of bone reamed, as well as reamed cortical volume and cancellous volume, was calculated. Total, cortical, and cancellous baseplate contact areas were also calculated. Finally, total glenoid lateralization was calculated for each phase and compared. RESULTS: Mean implant version was clinically similar across phases but was statistically significantly lower in phase 3 (P = .006 compared with phase 1 and P = .001 compared with phase 2). Mean implant inclination was clinically similar across phases but was statistically significantly lower in phase 3 (P < .001). Phase 3 had statistically significantly lower cancellous and total reamed bone volumes compared with phase 1 and phase 2 (P < .001 for all comparisons). Phase 3 had statistically significantly larger cortical contact area, lower cancellous contact area, and larger total contact area compared with phase 1 and phase 2 (P < .001 for all comparisons). Phase 3 had significantly greater glenoid lateralization (mean, 10.5 mm) compared with phase 1 (mean, 7.8 mm; P < .001) and phase 2 (mean, 7.9 mm; P < .001). CONCLUSIONS: Across a wide range of glenoid pathology during virtual surgical planning, experienced shoulder arthroplasty surgeons chose augmented baseplates frequently, and the option of a full-wedge augmented baseplate resulted in statistically significantly greater correction of glenoid deformity, improved total and cortical baseplate contact area, less cancellous reamed bone, and greater glenoid lateralization. Backside seating information does not have a significant impact on how glenoid baseplates are virtually positioned for RTSA, nor does it impact the baseplate contact area or volume of reamed bone.

Association between Haloperidol use and Risk of Rheumatoid Arthritis.

Haloperidol is an anti-psychotic used for the treatment of schizophrenia or Tourette disorder. Here we report, by studying three large administrative health insurance databases, that haloperidol use is associated with a reduced risk of developing rheumatoid arthritis. A meta-analysis revealed a 31% reduced hazard of incident rheumatoid arthritis among individuals with schizophrenia or Tourette disorder treated with haloperidol compared to those treated with other anti-psychotic drugs. These findings suggest a potential benefit of haloperidol in rheumatoid arthritis and provide a rationale for randomized controlled trials to provide causal insights.

No Deficits in Functional Outcomes of the Contralateral Limb Are Seen When the Hamstring Is Harvested for Augmentation of Small Diameter Ipsilateral Hamstring Autograft.

Purpose: To evaluate clinical outcomes of the contralateral, nonoperative limb in patients undergoing contralateral hamstring (HS) autograft harvest compared with patients undergoing ipsilateral HS autograft harvest alone. Methods: This study included 96 patients who underwent isolated anterior cruciate ligament reconstruction (ACLR) using 4-stranded HS autograft (n = 85) or 4-stranded HS autograft augmented with contralateral HS (n = 13) due to inclusion of ipsilateral graft diameter <8 mm. Isokinetic flexion and extension strength and dynamic performance of the ipsilateral and contralateral limbs and limb symmetry index (LSI) were evaluated at 6 months' postoperatively. Rates of contralateral native ACL tear at minimum 2 years also were compared. For all comparisons, P < .05 was considered statistically significant. Results: Normalized isokinetic knee flexion and extension strength of the contralateral limb did not differ between cohorts (P = .34; P = .21, respectively). LSI for knee extension peak torque and knee flexion peak torque did not differ between cohorts (P = .44; P = .67, respectively). No difference in LSI was seen for any dynamic performance testing (single leg hop, P = .97; triple leg hop, P = .14; 6-m timed hop, P = .99). No difference was observed in International Knee Documentation Committee (P = .99) or Knee Injury and Osteoarthritis Outcome Score subscale measures (P = .39-.86). No difference in rates of contralateral knee native ACL tears were seen between cohorts (HS autograft + contralateral HS augmentation, n = 2, 15.4%; HS autograft, n = 7, 8.4%; P = .26). Conclusions: In this study, at the time of return to sport, we found no differences in contralateral limb functional performance or limb symmetry measurements between patients undergoing contralateral HS autograft harvest for augmentation of smaller (<8 mm) diameter HS autografts harvested from the injured extremity. Level of Evidence: Level III, retrospective cohort study.

Multiplanar analysis of proximal humerus anatomy of patients with rotator cuff arthropathy and relevance to reverse shoulder press-fit stems.

Background: Short stems have become increasingly popular in reverse shoulder arthroplasty (RSA) due to their ability to preserve bone stock for revision surgery. However, short stems may be more at risk for malalignment or loosening, and commercially available stems have varied designs. The purpose of this study was to perform a multiplanar analysis of proximal humerus anatomy in patients with rotator cuff arthropathy to better define canal geometry and identify differences based on sex. Methods: A retrospective review was performed of a consecutive series of patients undergoing RSA for rotator cuff arthropathy. A total of 117 patients were identified with preoperative computed tomography scans. Measurements were undertaken following multiplanar reconstruction of the computed tomography scans. Measured parameters included the following: transition point (TP), anteroposterior (AP) and mediolateral (ML) distances, intramedullary (IM) and bone diameter, and cortical thickness. The TP was defined as the distance from the periosteal border of the greater tuberosity to the level of the IM canal where the endosteal borders became parallel. Measurements started at the metaphysis, and then proceeded 25 and 50 mm distal to the metaphysis followed by 10 mm increments thereafter. Each level was compared to the level above with t tests in the overall cohort and separately by sex. Height was correlated to ML-AP difference and IM diameter with Pearson correlation coefficient. Potential stem sizes that extended 50, 60, 70, and 80 mm from the metaphysis were analyzed to record the percentage of patients in whom the stem would reach past the TP. Results: The mean TP for all patients was 55.6 ± 7.4 mm (37.5-78.4) from the greater tuberosity, 53.3 ± 6.6 mm (37.5-67.0) in females and 58.1 ± 7.5 mm (41.9-78.4) in males. ML and AP distances and IM diameter became consistent at level 3 (mean, 83 mm distal to the greater tuberosity) in the overall cohort and in both sexes. Height positively correlated with IM diameter. Males had significantly larger IM diameters compared to females at all levels. Cortical thickness remained relatively consistent throughout the proximal humerus. A stem length of 70 mm would extend past the TP in 98% of patients. Conclusion: Humeral implants in RSA with a stem of at least 70 mm in length would extend distally past the TP in the majority of cases regardless of sex. At this point, the canal's area remains consistent which would facilitate diaphyseal fixation if required.

Impact of Biologic Augmentation on Revision Surgery Rates After Meniscus Repair: A Matched-Cohort Analysis of 3420 Patients.

Background: Platelet-rich plasma (PRP) and bone marrow aspirate concentrate (BMAC) have gained popularity in recent years as biologic approaches to potentially augment healing after meniscus repair. There have been few studies comparing outcomes in patients undergoing meniscus repair with versus without biologic augmentation and, furthermore, little clarity on the role of biologic augmentation for meniscus repairs performed with concomitant anterior cruciate ligament reconstruction (ACLR). Purpose: To determine the association of BMAC or PRP augmentation with revision surgery after both isolated meniscus repair and meniscus repair performed concomitantly with ACLR. Study Design: Cohort study; Level of evidence, 3. Methods: The PearlDiver Mariner dataset was queried to identify all patients who underwent primary meniscus repair, both with and without concomitant ACLR, and who received ipsilateral BMAC or PRP at the time of surgery. Patients who underwent similar surgery but without BMAC or PRP augmentation were then identified and matched in a 5:1 ratio according to age, sex, body mass index, and various comorbidities to 3 separate BMAC/PRP augmentation groups: overall cohort (with and without ACLR), repair with concomitant ACLR, and isolated repair. The primary outcome was revision meniscus surgery (meniscectomy or revision meniscus repair). Results: Overall, 3420 patients (570 with BMAC/PRP augmentation; 2850 matched controls without augmentation) were included. There were no significant differences in the reported demographics or comorbidities between any of the BMAC/PRP groups and their respective matched controls (P > .05 for all comparisons). There was no difference in revision rate between BMAC/PRP-augmented isolated meniscus repairs and matched controls (P = .235). Patients who underwent BMAC/PRP-augmented meniscus repair with concomitant ACLR experienced a significantly lower incidence of revision surgery compared with matched controls without BMAC/PRP augmentation (5.2% vs 7.9% respectively; odds ratio, 0.41; 95% CI, 0.27-0.63; P < .001), but the number of revisions was relatively small. Conclusion: There was no association between BMAC or PRP augmentation and the incidence of revision surgery after isolated primary meniscus repair. There was a statistically significant decrease in the rate of revision meniscus surgery when BMAC or PRP was used to augment meniscus repairs in the setting of concurrent ACLR; however, the overall revision rates were small.

Objective analysis of partial three-dimensional rotator cuff muscle volume and fat infiltration across ages and sex from clinical MRI scans.

Objective analysis of rotator cuff (RC) atrophy and fatty infiltration (FI) from clinical MRI is limited by qualitative measures and variation in scapular coverage. The goals of this study were to: develop/evaluate a method to quantify RC muscle size, atrophy, and FI from clinical MRIs (with typical lateral only coverage) and then quantify the effects of age and sex on RC muscle. To develop the method, 47 full scapula coverage CTs with matching clinical MRIs were used to: correct for variation in scan capture, and ensure impactful information of the RC is measured. Utilizing this methodology and automated artificial intelligence, 170 healthy clinical shoulder MRIs of varying age and sex were segmented, and each RC muscle's size, relative contribution, and FI as a function of scapula location were quantified. A two-way ANOVA was used to examine the effect of age and sex on RC musculature. The analysis revealed significant (p < 0.05): decreases in size of the supraspinatus, teres minor, and subscapularis with age; decreased supraspinatus and increased infraspinatus relative contribution with age; and increased FI in the infraspinatus with age and in females. This study demonstrated that clinically obtained MRIs can be utilized for automatic 3D analysis of the RC. This method is not susceptible to coverage variation or patient size. Application of methodology in a healthy population revealed differences in RC musculature across ages and FI level between sexes. This large database can be used to reference expected muscle characteristics as a function of scapula location and could eventually be used in conjunction with the proposed methodology for analysis in patient populations.

Knee extensor torque-velocity relationships following anterior cruciate ligament reconstruction.

BACKGROUND: The inherent nature of the torque-velocity relationship is the inverse nature between the velocity of muscle contraction and torque production and is an indication of muscle function. The purpose of this study was to characterize the torque-velocity relationship in the quadriceps following anterior cruciate ligament reconstruction compared to healthy limbs. METHODS: 681 participants were included, 493 of which were patients at least four months following anterior cruciate ligament reconstruction (23.2 ± 10.08 yr, 6.6 ± 5.37 months post-surgery) and 188 were healthy participants (21.6 ± 3.77 yr). A subset of 175 post-surgical participants completed a repeated visit (8.1 ± 1.71 months post-surgery). Participants completed isokinetic knee extension at 90°/s and 180°/s. A one-way ANOVA was used to compare torque velocity relationships by limb type (surgical, contralateral, healthy). Paired samples t-tests were conducted to analyze the torque-velocity relationship across limbs and across time. FINDINGS: There was a large effect for limb type on torque-velocity (F(2, 1173) = 146.08, p < 0.001, η2 = 0.20). Surgical limbs demonstrated significantly lower torque-velocity relationships compared to the contralateral limbs (ACLR: 0.26 Nm/kg, contralateral:0.55 Nm/kg, p < 0.001, d = 1.18). Healthy limbs had similar torque-velocity relationships bilaterally (dominant limb: 0.48 Nm/kg, non-dominant limb: 0.49 Nm/kg, p = 0.45). The torque velocity relationship for the involved limb significantly increased in magnitude over time (+0.11 Nm/kg, p < 0.001, d = -0.61) while the contralateral limb torque-velocity relationship remained stable over time (0.0 Nm/kg difference, p = 0.60). INTERPRETATION: Following surgery, the knee extensors appear to have altered torque-velocity relationships compared to contralateral and healthy limbs. This may indicate a specific target for assessment and rehabilitation following surgery.

Hip Strength Recovery After Anterior Cruciate Ligament Reconstruction.

Background: Return-to-play (RTP) assessment after anterior cruciate ligament reconstruction (ACLR) rarely includes hip strength. Hypothesis: It was hypothesized that (1) patients after ACLR will have weaker hip abduction (AB) and adduction (AD) strength compared with the contralateral limb, with larger deficits in women, (2) there will be a correlation between hip and thigh strength ratios and patient-reported outcomes (PROs), and (3) hip AB and AD strength will improve over time. Study Design: Descriptive laboratory study. Methods: Included were 140 patients (74 male, 66 female; mean age, 24.16 ± 10.82 years) who underwent RTP assessment at 6.1 ± 1.6 months after ACLR; 86 patients underwent a second assessment at 8.2 ± 2.2 months. Hip AB/AD and knee extension/flexion isometric strength were measured and normalized to body mass, and PRO scores were collected. Strength ratios (hip vs thigh), limb differences (injured vs uninjured), sex-based differences, and relationships between strength ratios and PROs were determined. Results: Hip AB strength was weaker on the ACLR limb (ACLR vs contralateral: 1.85 ± 0.49 vs 1.89 ± 0.48 N·m/kg; P < .001) and hip AD torque was stronger (ACLR vs contralateral: 1.80 ± 0.51 vs 1.76 ± 0.52 N·m/kg; P = .004), with no sex-by-limb interaction found. Lower hip-to-thigh strength ratios of the ACLR limb were correlated with higher PRO scores (r = -0.17 to -0.25). Over time, hip AB strength increased in the ACLR limb more than in the contralateral limb (P = .01); however, the ACLR limb remained weaker in hip AB at visit 2 (ACLR vs contralateral: 1.88 ± 0.46 vs 1.91 ± 0.45 N·m/kg; P = .04). In both limbs, hip AD strength was greater at visit 2 than visit 1 (ACLR: 1.82 ± 0.48 vs 1.70 ± 0.48 N·m/kg; contralateral: 1.76 ± 0.47 vs 1.67 ± 0.47 N·m/kg; P < .01 for both). Conclusion: The ACLR limb had weaker hip AB and stronger AD compared with the contralateral limb at initial assessment. Hip muscle strength recovery was not influenced by sex. Hip strength and symmetry improved over the course of rehabilitation. Although strength differences across limbs were minor, the clinical importance of these differences is still unknown. Clinical Relevance: The evidence provided highlights the need to integrate hip strength into RTP assessments to identify hip strength deficits that may increase reinjury or lead to poor long-term outcomes.

Social Determinants of Health Disparities Are Associated With Increased Costs, Revisions, and Infection in Patients Undergoing Arthroscopic Rotator Cuff Repair.

PURPOSE: The purpose of this study was to use a national claims database to assess the impact of pre-existing social determinants of health disparities (SDHD) on postoperative outcomes following rotator cuff repair (RCR). METHODS: A retrospective review of the Mariner Claims Database was used to capture patients undergoing primary RCR with at least 1 year of follow-up. These patients were divided into two cohorts based on the presence of a current or previous history of SDHD, encompassing educational, environmental, social, or economic disparities. Records were queried for 90-day postoperative complications, consisting of minor and major medical complications, emergency department (ED) visits, readmission, stiffness, and 1-year ipsilateral revision surgery. Multivariate logistic regression was employed to assess the impact of SDHD on the assessed postoperative outcomes following RCR. RESULTS: 58,748 patients undergoing primary RCR with a SDHD diagnosis and 58,748 patients in the matched control group were included. A previous diagnosis of SDHD was associated with an increased risk of ED visits (OR 1.22, 95% CI 1.18-1.27; P < .001), postoperative stiffness (OR 2.53, 95% CI 2.42-2.64; P < .001), and revision surgery (OR 2.35, 95% CI 2.13-2.59; P < .001) compared to the matched control group. Subgroup analysis revealed educational disparities had the greatest risk for 1-year revision (OR 3.13, 95% CI 2.53-4.05; P < .001). CONCLUSIONS: The presence of a SDHD was associated with an increased risk of revision surgery, postoperative stiffness, emergency room visits, medical complications, and surgical costs following arthroscopic RCR. Overall, economic and educational SDHD were associated with the greatest risk of 1-year revision surgery. LEVEL OF EVIDENCE: III, retrospective cohort study.

The "N+10 Rule" to Avoid Graft-Tunnel Mismatch in Bone-Patellar Tendon-Bone ACL Reconstruction Using Independent Femoral Tunnel Drilling.

Background: Graft-tunnel mismatch (GTM) is a common problem in anterior cruciate ligament (ACL) reconstruction (ACLR) using bone-patellar tendon-bone (BPTB) grafts. Hypothesis: Application of the "N+10 rule" in endoscopic ACLR with BPTB grafts will result in acceptable tibial tunnel length (TTL), minimizing GTM. Study Design: Controlled laboratory study. Methods: Endoscopic BPTB ACLR was conducted on the paired knees of 10 cadaveric specimens using 2 independent femoral tunnel drilling techniques-accessory anteromedial portal and flexible reamer. The graft bone blocks were trimmed to 10 × 20 mm, and the intertendinous distance (represented by "N") between the bone blocks was measured. The N+10 rule was used to set the angle of the ACL tibial tunnel guide to the appropriate number of degrees for drilling. The amount of excursion or recession of the tibial bone plug in relation to the anterior tibial cortical aperture was measured in both flexion and extension. A GTM threshold of ±7.5 mm was set based on prior studies. Results: The mean BPTB ACL intertendinous distance was 47.5 ± 5.5 mm. The mean measured intra-articular distance was 27.2 ± 3 mm. Using the N+10 rule, the mean total (flexion plus extension) GTM was 4.3 ± 3.2 mm (GTM in flexion, 4.9 ± 3.6 mm; GTM in extension, 3.8 ± 3.5 mm). In 18 of 20 (90%) cadaveric knees, the mean total GTM fell within the ±7.5-mm threshold. When comparing the actual measured TTL to the calculated TTL, there was a mean difference of 5.4 ± 3.9 mm. When comparing femoral tunnel drilling techniques, the total GTM for the accessory anteromedial portal technique was 2.1 ± 3.7 mm, while the total GTM for the flexible reamer technique was 3.6 ± 5.4 mm (P = .5). Conclusion: The N+10 rule resulted in an acceptable mean GTM in both flexion and extension. The mean difference between the measured versus calculated TTL using the N+10 rule was also acceptable. Clinical Relevance: The N+10 rule is a simple and effective intraoperative strategy for achieving desired TTL regardless of patient-specific factors to avoid excessive GTM in endoscopic BPTB ACLR using independent femoral tunnel drilling.