Extra-articular proximal tibia fracture fixation with locked plating versus intramedullary nailing: A meta-analysis.

OBJECTIVES: This study compared outcomes of locked plating (LP) versus intramedullary nailing (IMN) techniques for treatment of extra-articular proximal-third tibia fractures. METHODS: Data Sources: PubMed, Ovid MEDLINE STUDY SELECTION: Studies were included if they compared LP and IMN fixation for proximal one third tibial shaft fractures without articular extension or with simple articular extension into the tibial plateau. Minimum 1 year of clinical and radiographic follow up was used. DATA EXTRACTION: Outcomes assessed included operative duration, postoperative knee range of motion (ROM), union outcomes (time to union, nonunion, malunion, delayed union), and incidence of postoperative complications (superficial and deep infection, secondary surgical intervention, compartment syndrome). DATA SYNTHESIS: Separate random-effects meta-analyses were conducted for each outcome. For categorical data, relative risks were used whereas the standardized mean difference was used for continuous variables, with corresponding 95 % confidence intervals. RESULTS: 7 studies were included reporting the outcomes of 319 patients treated with LP and 300 treated with IMN. IMN fixation had significantly shorter time to union (p = 0.049) and lower risk for superficial infection (p = 0.028). However, LP conferred a significantly lower risk for malunion (p = 0.017) and postoperative compartment syndrome (p = 0.018). CONCLUSION: IMN demonstrated significantly shorter time to union and lower risk of superficial infection when treating extra-articular proximal tibia fractures, while LP fixation demonstrated significantly lower risk for malunion and postoperative compartment syndrome. Although successful results can be achieved with good technique in LP and IMN fixation, a significant complication profile exists with these fractures regardless of construct choice. LEVEL OF EVIDENCE: Therapeutic Level III.

The 3D-Printed Custom Elbow Prosthesis for Salvage Treatment of Complex Intra-Articular Distal Humerus Fracture Malunion.

Intra-articular fractures of the distal humerus are complex injuries that often require surgery with the goal of restoring elbow range-of-motion and function. Open reduction and internal fixation has been the preferred surgical modality; however, restoration of the medial and/or lateral columns can be complicated in fractures involving a major loss of the articular surface and bony structure. Over the past decade, 3-dimensional (3D) printing has made significant advances in the field of orthopedic surgery, specifically in guiding surgeon preoperative planning. Recently, the incorporation of 3D-printing has proven to provide a safe and reliable construct for the restoration of anatomy in complex trauma cases. We present a 47-year-old woman who sustained a complex, intra-articular distal humerus fracture with associated shearing of the capitellum that went onto malunion. Patient was treated with a patient-specific 3D-printed custom elbow prosthesis with excellent outcomes. Our goal was to shed light on the use of 3D-printing technology as a viable salvage option in treating complex, intra-articular distal humeral fractures associated with lateral condylar damage that subsequently went onto malunion.

Perioperative Considerations for Use of Custom Metallic Implants in Limb Reconstruction.

SUMMARY: The surgical management of critical bone defects remains challenging. Regardless of whether bone loss is acute or the result of staged surgical resection, current surgical management often requires advanced reconstructive techniques, many of which require multiple surgical procedures and consistent patient involvement with applied internal or external orthopaedic devices. The utilization of three-dimensional (3D) printing technology has continued to expand across orthopaedic subspecialties; in orthopaedic trauma, custom metallic implants are being used in the management of critical bone defects. Implementation of this technique may be advantageous in certain clinical situations. The perioperative considerations for placement of a custom bone defect printed metallic implant are presented in conjunction with demonstrative clinical cases.

Systemic Absorption Resulting from Tobramycin-Loaded Antibiotic Cement Spacers Used in the Treatment of Prosthetic Joint Infection.

Purpose: Antimicrobial cement spacer (ACS) placement has been a cornerstone of two-stage management of prosthetic hip and knee infection. Pharmacokinetic modelling has described peak systemic antibiotic concentrations within the first 24-48 h post-operatively, followed by rapid clearance. A few studies have, however, identified detectable tobramycin levels in patients with a post-operative decline in creatinine clearance. Our study sought to determine how frequently detectable serum tobramycin levels occurred within the first 72 h following ACS placement in all patients regardless of baseline or subsequent changes in renal function, whether these levels correlated with tobramycin spacer dosage, creatinine clearance, or potential nephrotoxicity risk factors, and whether any patients developed acute kidney injury within the 14-day post-operative period. Methods: We prospectively enrolled patients with prosthetic hip or knee infections and subsequent ACS placement from October 2017 to February 2020. Patient comorbidities (chronic kidney disease, diabetes mellitus, chronic liver disease, chronic obstructive pulmonary disease, and atrial fibrillation), Charleston Comorbidity Index score, risk factors for post-operative nephrotoxicity (perioperative hypotension and nephrotoxic agent receipt), total tobramycin dosage, post-operative days 1 and 3 serum tobramycin concentrations, and serum creatinine and creatinine clearance throughout a 14-day post-operative period were recorded. Results: A total of 20 patients were enrolled, comprising 20 spacers with a median total tobramycin dosage of 4.80 g with an interquartile range (IQR) of 4.13-7.20 g. Thirteen patients had a median detectable post-operative day 1 serum tobramycin concentration of 0.80 (IQR 0.50-1.60) mcg/mL. Five of these 13 patients had a median detectable post-operative day 3 serum tobramycin concentration of 0.80 (IQR 0.50-1.10) mcg/mL. A correlation was not found between serum tobramycin drug levels and patient comorbidities, receipt of nephrotoxic medications, or baseline and subsequent post-operative creatinine clearance up to day 14. Conclusion: The majority of patients who underwent tobramycin ACS placement had detectable serum tobramycin levels in the immediate post-operative period, but most reached undetectable levels within 72 h. There were no reliable perioperative predictors of detectable drug levels.

Orthopaedic Advances: Use of Three-Dimensional Metallic Implants for Reconstruction of Critical Bone Defects After Trauma.

Multiple successful strategies exist for the management of critical-sized bone defects. Depending on the location and etiology of an osseous defect, there are nuances that must be considered by the treating surgeon. The induced membrane technique and various modifications of the Ilizarov method (bone transport by distraction osteogenesis) have been the most common methods for biologic reconstruction. Despite the versatility and high union rates reported, they may not be practical for every patient. The rapid expansion of three-dimensional printing of medical devices has led to an increase in their use within orthopaedic surgery, specifically in the definitive treatment of critical bone defects. This article proposes indications and contraindications for implementation of this technology and reviews the available clinical evidence on the use of custom nonresorbable implants for the treatment of traumatic bone loss. Clinical cases are presented to illustrate the scenarios in which this approach is viable.

Conservative Management with Functional Brace Versus Various Surgical Fixation Techniques for Humeral Shaft Fractures: A Network Meta-Analysis.

BACKGROUND: Historically, humeral shaft fractures have been successfully treated with nonoperative management and functional bracing; however, various surgical options are also available. In the present study, we compared the outcomes of nonoperative versus operative interventions for the treatment of extra-articular humeral shaft fractures. METHODS: This study was a network meta-analysis of prospective randomized controlled trials (RCTs) in which functional bracing was compared with surgical techniques (including open reduction and internal fixation [ORIF], minimally invasive plate osteosynthesis [MIPO], and intramedullary nailing in both antegrade [aIMN] and retrograde [rIMN] directions) for the treatment of humeral shaft fractures. The outcomes that were assessed included time to union and the rates of nonunion, malunion, delayed union, secondary surgical intervention, iatrogenic radial nerve palsy, and infection. Mean differences and log odds ratios (ORs) were used to analyze continuous and categorical data, respectively. RESULTS: Twenty-one RCTs evaluating the outcomes for 1,203 patients who had been treated with functional bracing (n = 190), ORIF (n = 479), MIPO (n = 177), aIMN (n = 312), or rIMN (n = 45) were included. Functional bracing yielded significantly higher odds of nonunion and significantly longer time to union than ORIF, MIPO, and aIMN (p < 0.05). Comparison of surgical fixation techniques demonstrated significantly faster time to union with MIPO than with ORIF (p = 0.043). Significantly higher odds of malunion were observed with functional bracing than with ORIF (p = 0.047). Significantly higher odds of delayed union were observed with aIMN than with ORIF (p = 0.036). Significantly higher odds of secondary surgical intervention were observed with functional bracing than with ORIF (p = 0.001), MIPO (p = 0.007), and aIMN (p = 0.004). However, ORIF was associated with significantly higher odds of iatrogenic radial nerve injury and superficial infection than both functional bracing and MIPO (p < 0.05). CONCLUSIONS: Compared with functional bracing, most operative interventions demonstrated lower rates of reoperation. MIPO demonstrated significantly faster time to union while limiting periosteal stripping, whereas ORIF was associated with significantly higher rates of radial nerve palsy. Nonoperative management with functional bracing demonstrated higher nonunion rates than most surgical techniques, often requiring conversion to surgical fixation. LEVEL OF EVIDENCE: Therapeutic Level I . See Instructions for Authors for a complete description of levels of evidence.

Complications of surgically treated pelvic ring injuries with associated genitourinary injuries.

OBJECTIVE: Pelvic ring injuries are often associated with vascular and intrapelvic organ injuries including damage to the genitourinary system. The purpose of this study was to examine the relationship between surgically treated pelvic ring injuries and genitourinary injuries. The primary outcome was to determine the rate of post-operative complications including infection, urinary dysfunction, and sexual dysfunction. The secondary outcome was to determine if the time to surgery was associated with post-operative complications. METHODS: Retrospective chart review from September 1, 2015 to December 31, 2019 of patients who sustained a pelvic ring injury which required surgical intervention. All patients with closed triradiate cartilage were included. RESULTS: A total of 115 patients met the inclusion criteria, 12 patients with an associated genitourinary (GU) injury were included in the GU group and 103 without GU injury were placed in the non-GU group. The median (range) age of patients in the GU group was 49.5 years (20, 64) and 48 years (15, 92) in the control group (p = 0.92). Demographic characteristics including age, Injury Severity Score and Elixhauser comorbidity score were similar between groups. Within the GU group, five patients had an injury to their bladder, four to their urethra and three had an injury to their kidney. In the GU group, one patient developed a wound dehiscence and one developed a urinary tract infection with subsequent sepsis (17%), while in the non-GU group, one patient (1%) developed erectile dysfunction (p = 0.028). Regression analysis demonstrated that having concomitant pelvic ring and GU injuries, as well as the number of surgeries were variables associated with post-operative complications, while time to surgery was not. DISCUSSION AND CONCLUSIONS: Pelvic ring injuries with concomitant genitourinary injuries were associated with increased odds of post-operative complications. No differences were noted in complication rates due to the time to surgery between groups.

A biomechanical comparison of superior ramus plating versus intramedullary screw fixation for unstable lateral compression pelvic ring injuries,,.

INTRODUCTION: Management of the anterior component of unstable lateral compression (LC) pelvic ring injuries remains controversial. Common internal fixation options include plating and superior pubic ramus screws. These constructs have been evaluated in anterior-posterior compression (APC) fracture patterns, but no study has compared the two for unstable LC patterns, which is the purpose of this study. METHODS: A rotationally unstable LC pelvic ring injury was modeled in 10 fresh frozen cadaver specimens by creating a complete sacral fracture, disruption of posterior ligaments, and ipsilateral superior and inferior rami osteotomies. All specimens were repaired posteriorly with two fully threaded 7 mm cannulated transiliac-transsacral screws through the S1 and S2 corridors. The superior ramus was repaired with either a 3.5 mm pelvic reconstruction plate (n = 5) or a bicortical 5.5 mm cannulated retrograde superior ramus screw (n = 5). Specimens were loaded axially in single leg support for 1000 cycles at 400 N followed by an additional 3 cycles at 800 N. Displacement and angulation of the superior and inferior rami osteotomies were measured with a three-dimensional (3D) motion tracker. The two fixation methods were then compared with Mann-Whitney U-Tests. RESULTS: Retrograde superior ramus screw fixation had lower average displacement and angulation than plate fixation in all categories, with the motion at the inferior ramus at 800 N of loading showing a statistically significant difference in angulation. CONCLUSION: Although management of the anterior ring in unstable LC injuries remains controversial, indications for fixation are becoming more defined over time. In this study, the 5.5 mm cannulated retrograde superior ramus screw significantly outperformed the 3.5 mm reconstruction plate in angulation of the inferior ramus fracture at 800 N. No other significance was found, however the ramus screw demonstrated lower average displacements and angulations in all categories for both the inferior and superior ramus fractures.

Biomechanical analysis of stability of joint depression calcaneal fractures: Fixation with locking compression plate alone compared with addition of supplemental oblique screw.

Purpose: The standard treatment of calcaneus fractures is a lateral plate and screw construct. Patients at our institution have been treated with a lateral locking plate combined with one retrograde screw inserted in the oblique plane to allow immediate weight bearing. The purpose of this study was to determine whether addition of a oblique screw to a lateral plate construct increases stability. Methods: A Sanders 2B fracture (AO/OTA 83-C2) was created in 8 pairs (16 total specimens) of cadaveric feet. All were repaired using a lateral locking plate/screws construct. One specimen in each pair was chosen randomly to receive an additional oblique screw. The specimens were tested with cyclic load of up to 800 N. Movement at the fracture sites and subsidence of the talus were tracked with a three-dimensional video analysis system. Results: Talar subsidence was not significantly affected by the presence of the additional oblique screw (p = 0.22). The sustentaculum fragment in the case of the screw repair moved 0.39 mm while the same fragment without the additional screw repair displaced 0.12 mm (p < 0.01). Two repairs with and one repair without the additional screw failed during longer-term cyclic loading. Conclusion: The two repair types were not statistically different in regards to talar subsidence. While statistical significance resulted in the comparison of sustentaculum fragment movement, the amount of movement did not reach a level of clinical relevance. This study demonstrated immediate stability and durability of the additional screw construct with high volume weight bearing loads.

Survey Analysis of Orthopedic Call Compensation.

We sought to determine the type, frequency, and compensation details of orthopedic call for orthopedic traumatologists. We administered a 24-question survey to all members of the Orthopaedic Trauma Association regarding the number and type of orthopedic surgeons within the call pool, frequency of call, number of hospitals covered, and compensation for weekday, weekend, holiday, and pediatric calls. A total of 105 orthopedic surgeons replied. The most common number of physicians in the call pool was 6 to 10 (42.9%), whereas the most common number of traumatologists was 0 to 5 (90.5%), with 71.4% taking call at 1 hospital. Further, 56.7% were paid separately for weekday trauma call, with the most common number of call days per week being 2. The most common compensation was $1001 to $1500 (31.6%). For weekend call, 49.5% of physicians were paid separately, with the most common number of weekends on call per year being 11 to 15 (34.3% of replies). For pediatric call, 54.3% of physicians took call, with 28.6% paid separately and 33.3% receiving $0 to $500. For holiday call, 40.2% of physicians were paid separately, with 30.8% receiving $1001 to $1500. We describe the characteristics of traumatology call. Approximately 50% of physicians (range, 28.6%-56.3%) are compensated separately for taking different forms of call (ie, weekday, weekend, holiday). [Orthopedics. 2022;45(5):293-296.].

Avoiding the blood supply to the femoral head during cannulated screw fixation: A comparison of two techniques.

OBJECTIVES: To compare the strength of the inverted triangle (IT) versus the L-shaped cannulated screw fixation technique for stabilizing a Pauwels 2 femoral neck fracture. To demonstrate the risk to the blood supply to the femoral head from a posterior-superior screw. METHODS: The IT construct was compared with the L-shaped design in 10 composite femurs. A Pauwels 2 fracture was made with a 5 mm gap. Each specimen was loaded over 5000 cycles, measuring angular/shear displacement then loaded to failure. The data were analyzed using Mann-Whitney U test. Three separate fresh frozen cadavers were injected with low-viscosity epoxy. The intraosseous bloody supply was inspected in each femoral head (no fixation, IT, L-shaped). RESULTS: There was no difference in angular (P = .3) or shear displacement (P = .99) between either screw design after cyclical loading. Also, there was not statistical difference in load to failure testing between either construct (P = .99). The average load to failure in the IT group was 3204.4 N. The average was 3180.2 N in the L-shaped design. We demonstrated the presence of the intraosseous portion of the lateral epiphyseal vessel in the specimen without screw fixation. This was preserved in the specimen with the L-shaped design but absent in the specimen following IT fixation. CONCLUSIONS: The strength of the L-shaped construct was not statistically different than the strength of the IT design. The posterior-superior screw may put the main blood supply to the femoral head at risk and should be avoided.

High-strength, porous additively manufactured implants with optimized mechanical osseointegration.

Optimization of porous titanium alloy scaffolds designed for orthopedic implants requires balancing mechanical properties and osseointegrative performance. The tradeoff between scaffold porosity and the stiffness/strength must be optimized towards the goal to improve long term load sharing while simultaneously promoting osseointegration. Osseointegration into porous titanium implants covering a wide range of porosity (0%-90%) and manufactured by laser powder bed fusion (LPBF) was evaluated with an established ovine cortical and cancellous defect model. Direct apposition and remodeling of woven bone was observed at the implant surface, as well as bone formation within the interstices of the pores. A linear relationship was observed between the porosity and benchtop mechanical properties of the scaffolds, while a non-linear relationship was observed between porosity and the ex vivo cortical bone-implant interfacial shear strength. Our study supports the hypothesis of porosity dependent performance tradeoffs, and establishes generalized relationships between porosity and performance for design of topological optimized implants for osseointegration. These results are widely applicable for orthopedic implant design for arthroplasty components, arthrodesis devices such as spinal interbody fusion implants, and patient matched implants for treatment of large bone defects.

Does Provisional Minifragment Fixation Prevent Compression With Dynamic Compression Plating? A Biomechanical Analysis.

OBJECTIVES: To compare the compressive force generated by a 3.5-mm compression plate with and without provisional fixation using a 2.0-mm minifragment plate. METHODS: Fourth generation composite large humeral sawbones underwent transection and were divided into 2 groups. The first group underwent fixation with a 3.5-mm compression plate; the second group underwent provisional fixation with a 2.0-mm plate followed by definitive fixation using a 3.5-mm plate. Using a load cell, the compressive force generated was measured after insertion of each of 2 eccentrical placed screws and the total compression recorded. RESULTS: There was no difference in the force generated after each successive compression screw (P = 0.59 and 0.58, respectively). Likewise, there was no significant difference in the total compression generated when the preload was accounted for (P = 0.93). CONCLUSION: Provisional minifragment fixation does not have any adverse effect on the forces generated during compression plating. These findings suggest that provisional minifragment plates do not need to be removed before definitive fixation.

Can preoperative radiographs predict hardware complication or fracture displacement after operative treatment of pelvic ring injuries?

INTRODUCTION: Operative fixation of pelvic ring injuries is associated with a high risk of hardware failure and loss of reduction. The purpose of this study was to determine whether preoperative radiographs can predict failure after operative treatment of pelvic ring injuries and if the method of fixation effects their risk. PATIENTS AND METHODS: We conducted a retrospective cohort study of 143 patients with pelvic ring injuries treated with operative fixation at a level 1 trauma center. Preoperative radiographs were examined for the presence of the following characteristics: bilateral rami fractures, segmental or comminuted rami fractures, contralateral anterior and posterior injuries, complete sacral fracture, and displaced inferior ramus fractures. The method of fixation was classified based on the presence of anterior, posterior, or combined anterior and posterior fixation as well as whether or not posterior fixation was performed at a single or multiple sacral levels. Post-operative radiographs were examined for hardware failure or loss of reduction. RESULTS: Twenty-one patients (14.7%) demonstrated either hardware complication or fracture displacement within 6 months of surgery. Male sex was associated with a decreased risk of hardware complication (OR 0.11 [0.014, 0.86]; p=0.03). Posterior pelvic ring fixation at multiple sacral levels was associated with a decreased risk of fracture displacement (OR 0.21 [0.056, 0.83]; p=0.02). We were unable to demonstrate a significant association between preoperative radiographic characteristics and risk of hardware failure or fracture displacement. CONCLUSION: Our study demonstrates that both gender and the method of posterior fixation are associated with hardware failure or displacement.

Biomechanical Testing of a Transmetatarsal Base Screw in Lisfranc Injuries.

OBJECTIVES: To compare displacement between the cuneiforms and metatarsals for a typical Lisfranc screw and a transmetatarsal base screw under biomechanical loading. METHODS: Eight pairs of cadaveric feet (16 total) were evaluated. The Lisfranc ligamentous structures were transected in all specimens. All feet were repaired with screws traversing the first and second tarsometatarsal joints. A Lisfranc screw was placed from the first cuneiform to the second metatarsal in 8 specimens. A transmetatarsal base screw from the first metatarsal to the second metatarsal was placed in the remaining 8 corresponding feet. The repairs were randomized by side. Markers were placed on the dorsum of the midfoot for optical tracking. The feet were mounted into a load frame and loaded on the plantar forefoot to 100, 400, 800, and 1100 N. Displacement was measured and recorded using 3D camera tracking. RESULTS: Displacement between the first cuneiform and second metatarsal base was found to be significantly less (P = 0.02) with the transmetatarsal screw than the Lisfranc screw. There were no significant differences between displacements at any other articulations. CONCLUSIONS: This study demonstrates biomechanical superiority using a modified transmetatarsal base screw compared with the highly used Lisfranc screw for fixation of ligamentous Lisfranc injuries.

Medial Plating of Pauwels Type III Femoral Neck Fractures Decreases Shear and Angular Displacement Compared with a Derotational Screw.

OBJECTIVES: The purpose of this mechanical study was to compare 2 methods of augmented stabilization of Pauwels type III femoral neck fractures. METHODS: Ten matched pairs of young cadaveric femurs were cut 22 cm distal to the lesser trochanter. All specimens received a 70-degree osteotomy, which was stabilized with a 135-degree sliding hip screw. One of each pair received augmented fixation with a 6.5 mm fully threaded cannulated screw. The other specimen in the matched pair had additional fixation with a 3.5 mm 5-hole tubular plate placed at the inferior-medial femoral neck. Each specimen was tested under cyclic axial loading conditions (5000 cycles between 200 and 1400 N at 2 cycles/sec) and subsequently loaded to failure. The angular displacement (varus), interfragmentary (shear) displacement, and failure loads were calculated. RESULTS: In the augmented plate group, 7 specimens failed by angular displacement and 3 failed by shear displacement. In the augmented screw group, 8 specimens failed by angular displacement and 2 by shear displacement. The plate group was found to have significantly less angular displacement, regardless of completed cycles, than the augmented screw group (0.75 ± 0.35 degrees vs. 2.15 ± 1.99 degrees averaged across completed cycles, P < 0.01). Similarly, the plate group was found to have significantly less shear displacement, regardless of completed cycles, than the augmented screw group (0.77 ± 0.70 mm vs. 1.22 ± 0.92 mm averaged across completed cycles, P = 0.01). The average failure load of the plate group (4930 ± 1578 N) was also larger but not significantly different from the screw group (3824 ± 2140 N), P = 0.12. CONCLUSIONS: Augmenting sliding hip screw stabilization of a Pauwels type III fracture with a medial plate applied to the femoral neck significantly decreases angular displacement and shear displacement compared with augmentation with a derotational screw.

Dual plate fixation results in improved union rates in comminuted distal femur fractures compared to single plate fixation.

PURPOSE: The treatment of distal femur fractures with extensive metaphyseal comminution is frequently complicated by high rates of nonunion and varus collapse. Dual plating with lateral and medial locking plates for these types of fractures has shown promising results in the recent literature. We hypothesize that dual plating of comminuted distal femur fractures leads to higher union rates and lower revision rates compared to an isolated lateral locking plate. METHODS: A retrospective medical chart review between January 2015 and December 2017 was conducted. Inclusion criteria included patients 18 years of age and older who sustained a complex distal femur fracture (AO/OTA 33-C2/33-C3 or periprosthetic fracture with significant metaphyseal comminution) and at least 6 months of follow up. Patients with simple fracture patterns, alternative fixation methods, and inadequate follow up were excluded. All patients in the single plating group were treated with a lateral distal femoral locking plate using a lateral approach. In the patients treated with dual plating, an extensile parapatellar approach was utilized for fracture reduction and placement of an adjunctive medial plate. Demographic information, fracture types, injury severity score (ISS), medical comorbidities, type of surgical fixation, union rates, complications, knee range of motion, time to follow up, and need for revision surgery were extrapolated from the medical charts for analysis. RESULTS: Twenty-one patients were included in the study. Thirteen patients underwent single plate fixation and 8 underwent dual plate fixation. There were no significant differences in demographics, number of co-morbidities, fracture classification, or ISS between single and dual plate groups (p > 0.05 for all). There was a statistically significant difference in union rates between the single plate group (6 nonunions, 4 unions, and 3 delayed unions) and the dual plate group, with no nonunions or delayed unions (p = 0.0049). Although not statistically significant, 4 patients treated with single plating underwent revision ORIF, compared to none in the dual plating group (p = 0.13). There were no significant differences in time to follow up, time to full weight bearing, or infection rates (p > 0.1 for all). CONCLUSION: Based on these results, the medial and lateral locked plating technique demonstrates a higher union rate, with possible lower rates of revision surgery, compared to a single lateral plate in highly comminuted distal femur fractures. LEVEL OF EVIDENCE: Level 3. Retrospective Cohort Study.

Management of Midfoot Fractures and Dislocations.

PURPOSE OF REVIEW: To outline the classic and recent literature of midfoot fractures and dislocations. RECENT FINDINGS: There has been an evolution of implant technology to include mini-fragment fixation, suture fixation, and staples. Their efficacy is still being elucidated in the literature. Also, there has been a recent push for primary fusion, which we will discuss. Open reduction internal fixation of the midfoot remains to be the gold standard treatment, to which all other treatments are compared. It remains to be seen if adjunct fixation techniques are efficacious enough to provide a good result. Further study is needed to determine which patients are likely to progress to debilitating arthrosis and require fusion.

Evaluating Postoperative Complications and Outcomes of Orthopedic Fracture Repair in Nonagenarian Patients.

INTRODUCTION: The United States and the world are currently experiencing a tremendous growth in the elderly population. Moreover, individuals surpassing the ages of 80 and 90 are also continuing to increase. As this unique division of society expands, it is critical that the medical community best understands how to assess, diagnose, and treat this population. The purpose of this study was to analyze morbidity, mortality, and overall outcome of patients aged 90 years and older after orthopedic surgical fracture repair. Such knowledge will guide patients and their families in making decisions when surgery is required among nonagenarians. METHODS: The trauma registry of our level I academic medical center was queried to identify potential study participants over the past decade. Two hundred and thirty-three surgical procedures among 227 patients were included and retrospectively assessed. Parameters of specific interest were injury type, mechanism of injury (including high energy vs low energy and height of falls), injury severity score, preoperative comorbidities, postoperative complications, length of hospital stay, discharge destination, and postoperative mortality rate. RESULTS: Overall, 4.3% of the cohort died in the hospital following surgery. Of the patients who survived, 89.7% were discharged to a professionally supervised setting. The nonagenarian population displayed a considerable follow-up rate, as 82.8% of individuals returned for their first postoperative office visit. DISCUSSION: Historically, surgical morbidity and mortality are highly associated with this age group. However, the number of nonagenarians in the United States is increasing, as are these surgical procedures. The epidemiologic and clinical findings of our study support this trend and add further insight into the matter. CONCLUSION: This investigation demonstrates that orthopedic surgery is an appropriate treatment in this population with an acceptable complication rate. Furthermore, nonagenarians have the potential to demonstrate a substantial follow-up rate, but postoperative discharge to a professionally supervised setting may be necessary.