RESUMO
We present an approach to prepare free-standing tips of micrometer-long nanowires electrodeposited in anodic aluminum oxide nanopores. Such open tips can be further processed, e.g. for vertical interconnects of functional layers or for tailoring the magnetization reversal of ferromagnetic nanowires. The magnetic switching of nanowires is usually initiated by vortex or domain formation at the nanowire tips. We show that coating the tips of Fe30Co70 nanowires (diameter 40 nm, length 16 µm) with thin antiferromagnetic Fe50Mn50 capping layers (thickness ≈10 nm) leads to magnetic hardening with a more than doubled energy product at ambient temperature.
RESUMO
Tetragonally strained interstitial Fe-Co-B alloys were synthesized as epitaxial films grown on a 20 nm thick Au0.55Cu0.45 buffer layer. Different ratios of the perpendicular to in-plane lattice constant c/a = 1.013, 1.034 and 1.02 were stabilized by adding interstitial boron with different concentrations 0, 4, and 10 at.%, respectively. Using ferromagnetic resonance (FMR) and x-ray magnetic circular dichroism (XMCD) we found that the total orbital magnetic moment significantly increases with increasing c/a ratio, indicating that reduced crystal symmetry and interstitial B leads to a noticeable enhancement of the effect of spin-orbit coupling (SOC) in the Fe-Co-B alloys. First-principles calculations reveal that the increase in orbital magnetic moment mainly originates from B impurities in octahedral position and the reduced symmetry around B atoms. These findings offer the possibility to enhance SOC phenomena-namely the magnetocrystalline anisotropy and the orbital moment-by stabilizing anisotropic strain by doping 4 at.% B. Results on the influence of B doping on the Fe-Co film microstructure, their coercive field and magnetic relaxation are also presented.
RESUMO
In this work, we present the arrangement of Fe3O4 magnetic nanoparticles into 3D linear chains and its effect on magnetic particle hyperthermia efficiency. The alignment has been performed under a 40 mT magnetic field in an agarose gel matrix. Two different sizes of magnetite nanoparticles, 10 and 40 nm, have been examined, exhibiting room temperature superparamagnetic and ferromagnetic behavior, in terms of DC magnetic field, respectively. The chain formation is experimentally visualized by scanning electron microscopy images. A molecular Dynamics anisotropic diffusion model that outlines the role of intrinsic particle properties and inter-particle distances on dipolar interactions has been used to simulate the chain formation process. The anisotropic character of the aligned samples is also reflected to ferromagnetic resonance and static magnetometry measurements. Compared to the non-aligned samples, magnetically aligned ones present enhanced heating efficiency increasing specific loss power value by a factor of two. Dipolar interactions are responsible for the chain formation of controllable density and thickness inducing shape anisotropy, which in turn enhances magnetic particle hyperthermia efficiency.
Assuntos
Temperatura Alta , Fenômenos Magnéticos , Nanopartículas de Magnetita/química , Modelos TeóricosRESUMO
Fe/CoO heterostructures were realized by depositing Fe thin films on CoO nanoparticle arrays. Magnetization measurements revealed that 1 nm Fe exhibits a superparamagnetic behavior at 300 K and a super spin-glass state at temperatures below 80 K. The superparamagnetic as well as super spin-glass state vanishes for higher Fe film thicknesses once Fe starts to form a continuous layer across the CoO nanoparticle arrays. Furthermore, all samples exhibit an exchange bias effect at 6 K after field cooling, with a maximum exchange bias field of about 60 Oe for a Fe thickness of 2 nm. M-H loops of thicker Fe samples show a two-step magnetization reversal where Fe in the area in between CoO nanoparticles reverses at low fields, while, in proximity to the CoO nanoparticles, Fe switches at substantially higher fields. Both reversals are exchange biased.
RESUMO
Nickel oxide (NiO) nanoflowers, prepared by thermal decomposition, exhibit anomalous magnetic properties far below the blocking temperature, i.e., a cusp in both the zero-field-cooled and field-cooled curves at about 21 K. Detailed characterization discloses that the individual NiO nanoflower consists of porous crystals with holes (1.0-1.5 nm in size) inside. We believe that the low temperature magnetic feature observed here could be a new kind of spin transition for the uncompensated spins around the holes and will trigger more studies in other nanostructured antiferromagnetic materials.
RESUMO
The self-organization of diblock copolymers into micellar structures in an appropriate solvent allows the deposition of well ordered arrays of pure metal and alloy nanoparticles on flat surfaces with narrow distributions in particle size and interparticle spacing. Here we investigated the influence of the materials (substrate and polymer) and deposition parameters (temperature and emersion velocity) on the deposition of metal salt loaded micelles by dip-coating from solution and on the order and inter-particle spacing of the micellar deposits and thus of the metal nanoparticle arrays resulting after plasma removal of the polymer shell. For identical substrate and polymer, variation of the process parameters temperature and emersion velocity enables the controlled modification of the interparticle distance within a certain length regime. Moreover, also the degree of hexagonal order of the final array depends sensitively on these parameters.
RESUMO
Novel, nanostructured, carbon-supported Pt model electrodes with homogeneously distributed Pt nanoparticles of uniform size were fabricated and analyzed with respect to their electrochemical properties. For this purpose, Pt-salt-loaded micelles were deposited on a glassy carbon substrate and subsequently exposed to an oxygen plasma and a H2 atmosphere for removal of the polymer carriers and reduction of the Pt salt. The morphology of the resulting nanoparticles and their electrochemical/electrocatalytic properties were characterized by high-resolution scanning electron microscopy, X-ray photoelectron spectroscopy, cyclic voltammetry, and differential electrochemical mass spectrometry for CO electrooxidation. The data demonstrate that this method is generally suited to the production of nanostructured model electrodes with well-defined and independently adjustable particle size and interparticle distance distributions, which are specifically suited for quantitative studies of transport processes in electrocatalytic reactions.
RESUMO
X-ray absorption and magnetic circular dichroism spectra at both the Fe and Pt L(3,2) edges were measured on wet-chemically synthesized monodisperse Fe(50)Pt(50) particles with a mean diameter of 6.3 nm before and after complete removal of the organic ligands and the oxide shell covering the particles by soft hydrogen plasma resulting in a pure metallic state. After thermal treatment of the metallic particles, the coercive field increased by a factor of 6, the orbital magnetic moment at the Fe site increased by 330% and is reduced at the Pt site by 30%, while the effective spin moments did not change. A decrease of the frequency of oscillations in the extended x-ray absorption fine structure at the Pt L(3,2) edges provides evidence for crystallographic changes towards the L1(0) phase.