Steel Wire Mesh as a Thermally Resistant SERS Substrate.

In this paper, we present novel type of Surface-enhanced Raman spectroscopy (SERS) platform, based on stainless steel wire mesh (SSWM) covered with thin silver layer. The stainless steel wire mesh, typically used in chemical engineering industry, is a cheap and versatile substrate for SERS platforms. SSWM consists of multiple steel wires with diameter of tens of micrometers, which gives periodical structure and high stiffness. Moreover, stainless steel provides great resistance towards organic and inorganic solvents and provides excellent heat dissipation. It is worth mentioning that continuous irradiation of the laser beam over the SERS substrate can be a source of significant increase in the local temperature of metallic nanostructures, which can lead to thermal degradation or fragmentation of the adsorbed analyte. Decomposition or fragmentation of the analysed sample usually causea a significant decrease in the intensity of recorded SERS bands, which either leads to false SERS responses or enables the analysis of spectral data. To our knowledge, we have developed for the first time the thermally resistant SERS platform. This type of SERS substrate, termed Ag/SSWM, exhibit high sensitivity (Enhancement Factor (EF) = 106) and reproducibility (Relative Standard Deviation (RSD) of 6.4%) towards detection of p-mercaptobenzoic acid (p-MBA). Besides, Ag/SSWM allows the specific detection and differentiation between Gram-positive and Gram-negative bacterial species: Escherichia coli and Bacillus subtilis in label-free and reproducible manner. The unique properties of designed substrate overcome the limitations associated with photo- and thermal degradation of sensitive bacterial samples. Thus, a distinctive SERS analysis of all kinds of chemical and biological samples at high sensitivity and selectivity can be performed on the developed SERS-active substrate.

SERS-based Immunoassay in a Microfluidic System for the Multiplexed Recognition of Interleukins from Blood Plasma: Towards Picogram Detection.

SERS-active nanostructures incorporated into a microfluidic device have been developed for rapid and multiplex monitoring of selected Type 1 cytokine (interleukins: IL-6, IL-8, IL-18) levels in blood plasma. Multiple analyses have been performed by using nanoparticles, each coated with different Raman reporter molecules: 5,5'-dithio-bis(2-nitro-benzoic acid) (DTNB), fuchsin (FC), and p-mercatpobenzoic acid (p-MBA) and with specific antibodies. The multivariate statistical method, principal component analysis (PCA), was applied for segregation of three different antigen-antibody complexes encoded by three Raman reporters (FC, p-MBA, and DTNB) during simultaneous multiplexed detection approach. To the best of our knowledge, we have also presented, for the first time, a possibility for multiplexed quantification of three interleukins: IL-6, IL-8, and IL-18 in blood plasma samples using SERS technique. Our method improves the detection limit in comparison to standard ELISA methods. The low detection limits were estimated to be 2.3 pg·ml-1, 6.5 pg·ml-1, and 4.2 pg·ml-1 in a parallel approach, and 3.8 pg·ml-1, 7.5 pg·ml-1, and 5.2 pg·ml-1 in a simultaneous multiplexed method for IL-6, IL-8, and IL-18, respectively. This demonstrated the sensitivity and reproducibility desirable for analytical examinations.

Ultrasensitive SERS immunoassay based on diatom biosilica for detection of interleukins in blood plasma.

An ultrasensitive surface-enhanced Raman scattering (SERS) immunoassay based on diatom biosilica with integrated gold nanoparticles (AuNPs) for the detection of interleukin 8 (IL-8) in blood plasma has been developed. The SERS sensing originates from unique features of the diatom frustules, which are capable of enhancing the localized surface-plasmon resonance of metal nanostructures. The SERS immune tags ware fabricated by functionalizing 70-nm Au nanoparticles with DTNB (i.e., 5,5'-dithiobis(2-nitrobenzoic acid)), which acted as a Raman reporter molecule, as well as the specific antibodies. These DTNB-labeled immune-AuNPs can form a sandwich structure with IL-8 antigens (infection marker) and the antibodies immobilized on the biosilica material. Our method showed an improved IL-8 detection limit in comparison to standard ELISA methods. The current detection limit for IL-8 using a conventional ELISA test is about 15.6 pg mL-1. The lower detection limit for IL-8 in blood plasma was estimated to be 6.2 pg mL-1. To the best of our knowledge, this is the first report on the recognition of IL-8 in human samples using a SERS-based method. This method clearly possesses high sensitivity to clinically relevant interleukin concentrations in body fluids. The average relative standard deviation of this method is less than 8%, which is sufficient for analytical analysis and comparable to those of classical ELISA methods. This SERS immunoassay also exhibits high biological specificity for the detection of IL-8 antigens. The established SERS immunoassay offers a valuable platform for the ultrasensitive and highly specific detection of immune biomarkers in a clinical setting for medical diagnostics. Graphical Abstract The SERS-based immunoassay based on naturally generated photonic biosilica for the detection of interleukin 8 (IL-8) in human plasma samples.

Detection of Hepatitis B virus antigen from human blood: SERS immunoassay in a microfluidic system.

A highly sensitive immunoassay utilizing surface-enhanced Raman scattering (SERS) has been developed with a new Raman reporter and a unique SERS-active substrate incorporated into a microfluidic device. An appropriately designed Raman reporter, basic fuchsin (FC), gives strong SERS enhancement and has the ability to bind both the antibody and gold nanostructures. The fuchsin-labeled immuno-Au nanoflowers can form a sandwich structure with the antigen and the antibody immobilized on the SERS-active substrate based on Au-Ag coated GaN. Our experimental results indicate that this SERS-active substrate with its strong surface-enhancement factor, high stability and reproducibility plays a crucial role in improving the efficiency of SERS immunoassay. This SERS assay was applied to the detection of Hepatitis B virus antigen (HBsAg) in human blood plasma. A calibration curve was obtained by plotting the intensity of SERS signal of FC band at 1178cm(-1) versus the concentration of antigen. The low detection limit for Hepatitis B virus antigen was estimated to be 0.01IU/mL. The average relative standard deviation (RSD) of this method is less than 10%. This SERS immunoassay gives exact results over a broad linear range, reflecting clinically relevant HBsAg concentrations. It also exhibits high biological specificity for the detection of Hepatitis B virus antigen.

Nanoparticles in a capillary trap: dynamic self-assembly at fluid interfaces.

Dynamic self-assembly is an emerging scientific concept aimed to construct artificial systems of adaptative behavior. Here, we present a first nanoscopic system that is able to dynamically self-assemble in two dimensions. This system is composed of charged gold nanoparticles, dispersed at the air-water interface, which self-assemble into a dense monolayer of area of several square centimeters in response to surface tension gradient. The surface tension gradient is imposed by localized addition or removal of organic solvent from the interface. After the surface tension is equalized over the whole fluid interface, the nanoparticles return to their initial dispersed state. The arrangement of nanoparticles before and after the self-assembly was characterized using SEM microscopy and SAXS spectroscopy. The constructed self-assembling system offers a "chemical" alternative for the Langmuir-Blodgett technique. Also, it was applied for creating self-erasing nanoparticle patterns on a fluid surface.

Gold Micro-Flowers: One-Step Fabrication of Efficient, Highly Reproducible Surface-Enhanced Raman Spectroscopy Platform.

We present a new method enabling simultaneous synthesis and deposition of gold micro-flowers (AuMFs) on solid substrates in a one-pot process that uses two reagents, auric acid and hydroxylamine hydrochloride, in aqueous reaction mixture. The AuMFs deposited onto the substrate form mechanically stable gold layer of expanded nanostructured surface. The morphology of the AuMFs depends on and can be controlled by the composition of the reaction solution as well as by the reaction time. The nanostructured metallic layers obtained with our method are employed as efficient platforms for chemical and biological sensing based on surface-enhanced Raman spectroscopy (SERS). SERS spectra recorded by such platforms for p-mercaptobenzoic acid and phage lambda exhibit enhancement factors above 10(6) and excellent reproducibility.

Studies of the synthesis of all stereoisomers of MG-132 proteasome inhibitors in the tumor targeting approach.

MG-132 is a tripeptide aldehyde (Z-l-leu-l-leu-l-leu-H, 2) proteasome inhibitor that exerts antitumor activity and enhances cytostatic/cytotoxic effects of chemo- and radiotherapy. Because of a troublesome synthesis of tripeptides with a non-natural configuration and modified side chains of amino acids, only two stereoisomers of MG-132 have been reported. Here, we propose a new approach to the synthesis of tripeptide aldehydes based on the Ugi reaction. Chiral, enantiomerically stable 2-isocyano-4-methylpentyl acetates were used as substrates for Ugi reaction resulting in a formation of tripeptide skeletons. Further functionalization of the obtained products led to a synthesis of tripeptide aldehydes. All stereoisomers of MG-132 were synthesized and studied as potential inhibitors of chymotrypsin-like, trypsin-like, and peptidylglutamyl peptide hydrolyzing activities of proteasome. These studies demonstrated the influence of absolute configuration of chiral aldehydes on the cytostatic/cytotoxic effects of the synthesized compounds and revealed that only (S,R,S)-(-)-2 stereoisomer is a more potent proteasome inhibitor than MG-132.