RESUMO
Single-photon emitters serve as building blocks for many emerging concepts in quantum photonics. The recent identification of bright, tunable and stable emitters in hexagonal boron nitride (hBN) has opened the door to quantum platforms operating across the infrared to ultraviolet spectrum. Although it is widely acknowledged that defects are responsible for single-photon emitters in hBN, crucial details regarding their origin, electronic levels and orbital involvement remain unknown. Here we employ a combination of resonant inelastic X-ray scattering and photoluminescence spectroscopy in defective hBN, unveiling an elementary excitation at 285 meV that gives rise to a plethora of harmonics correlated with single-photon emitters. We discuss the importance of N π* anti-bonding orbitals in shaping the electronic states of the emitters. The discovery of elementary excitations in hBN provides fundamental insights into quantum emission in low-dimensional materials, paving the way for future investigations in other platforms.
RESUMO
The growing field of quantum information technology requires propagation of information over long distances with efficient readout mechanisms. Excitonic quantum fluids have emerged as a powerful platform for this task due to their straightforward electro-optical conversion. In two-dimensional transition metal dichalcogenides, the coupling between spin and valley provides exciting opportunities for harnessing, manipulating, and storing bits of information. However, the large inhomogeneity of single layers cannot be overcome by the properties of bright excitons, hindering spin-valley transport. Nonetheless, the rich band structure supports dark excitonic states with strong binding energy and longer lifetime, ideally suited for long-range transport. Here we show that dark excitons can diffuse over several micrometers and prove that this repulsion-driven propagation is robust across non-uniform samples. The long-range propagation of dark states with an optical readout mediated by chiral phonons provides a new concept of excitonic devices for applications in both classical and quantum information technology.
Assuntos
Ciência da Informação , Fônons , Tecnologia da Informação , Meio Ambiente , SemicondutoresRESUMO
The Weyl semimetal WTe2 has shown several correlated electronic behaviors, such as the quantum spin Hall effect, superconductivity, ferroelectricity, and a possible exciton insulator state, all of which can be tuned by various physical and chemical approaches. Here, a new electronic phase in WTe2 induced by lithium intercalation is discovered. The new phase exhibits an increasing resistivity with decreasing temperature and its carrier density is almost two orders of magnitude lower than the carrier density of the semimetallic Td phase, probed by in situ Hall measurements as a function of lithium intercalation. The theoretical calculations predict the new lithiated phase to be a potential charge density wave (CDW) phase with a bandgap of ≈0.14 eV, in good agreement with the in situ transport data. The new phase is structurally distinct from the initial Td phase, characterized by polarization-angle-dependent Raman spectroscopy, and large lattice distortions close to 6% are predicted in the new phase. This finding of a new gapped phase in a 2D semimetal demonstrates electrochemical intercalation as a powerful tuning knob for modulating electron density and phase stability in 2D materials.
RESUMO
Transition-metal dichalcogenides (TMDs) are layered materials that have a semiconducting phase with many advantageous optoelectronic properties, including tightly bound excitons and spin-valley locking. In tungsten-based TMDs, spin- and momentum-forbidden transitions give rise to dark excitons that typically are optically inaccessible but represent the lowest excitonic states of the system. Dark excitons can deeply affect the transport, dynamics, and coherence of bright excitons, hampering device performance. Therefore, it is crucial to create conditions in which these excitonic states can be visualized and controlled. Here, we show that compressive strain in WS2 enables phonon scattering of photoexcited electrons between momentum valleys, enhancing the formation of dark intervalley excitons. We show that the emission and spectral properties of momentum-forbidden excitons are accessible and strongly depend on the local strain environment that modifies the band alignment. This mechanism is further exploited for strain sensing in two-dimensional semiconductors, revealing a gauge factor exceeding 104.
Assuntos
Semicondutores , Elementos de Transição , Movimento (Física) , Fônons , TungstênioRESUMO
The intercalation-induced phase transition of MoS2 from the semiconducting 2H to the semimetallic 1T' phase has been studied in detail for nearly a decade; however, the effects of a heterointerface between MoS2 and other two-dimensional (2D) crystals on the phase transition have largely been overlooked. Here, ab initio calculations show that intercalating Li at a MoS2-hexagonal boron nitride (hBN) interface stabilizes the 1T phase over the 2H phase of MoS2 by â¼100 mJ m -2, suggesting that encapsulating MoS2 with hBN may lower the electrochemical energy needed for the intercalation-induced phase transition. However, in situ Raman spectroscopy of hBN-MoS2-hBN heterostructures during the electrochemical intercalation of Li+ shows that the phase transition occurs at the same applied voltage for the heterostructure as for bare MoS2. We hypothesize that the predicted thermodynamic stabilization of the 1T'-MoS2-hBN interface is counteracted by an energy barrier to the phase transition imposed by the steric hindrance of the heterointerface. The phase transition occurs at lower applied voltages upon heating the heterostructure, which supports our hypothesis. Our study highlights that interfacial effects of 2D heterostructures can go beyond modulating electrical properties and can modify electrochemical and phase transition behaviors.
RESUMO
Owing to the small energy differences between its polymorphs, MoTe2 can access a full spectrum of electronic states from the 2H semiconducting state to the 1T' semimetallic state and from the Td Weyl semimetallic state to the superconducting state in the 1T' and Td phase at low temperature. Thus, it is a model system for phase transformation studies as well as quantum phenomena such as the quantum spin Hall effect and topological superconductivity. Careful studies of MoTe2 and its potential applications require large-area MoTe2 thin films with high crystallinity and thickness control. Here, we present cm2-scale synthesis of 2H-MoTe2 thin films with layer control and large grains that span several microns. Layer control is achieved by controlling the initial thickness of the precursor MoOx thin films, which are deposited on sapphire substrates by atomic layer deposition and subsequently tellurized. Despite the van der Waals epitaxy, the precursor-substrate interface is found to critically determine the uniformity in thickness and grain size of the resulting MoTe2 films: MoTe2 grown on sapphire show uniform films while MoTe2 grown on amorphous SiO2 substrates form islands. This synthesis strategy decouples the layer control from the variabilities of growth conditions for robust growth results and is applicable to growing other transition-metal dichalcogenides with layer control.
RESUMO
Tungsten ditelluride (WTe2) has many interesting properties such as its extremely large nonsaturating magnetoresistance and quantum spin Hall state in the monolayer limit. The anisotropic crystal structure of WTe2 can allow for isolation of particular crystal directions to study the predicted Weyl states or crystal-symmetry-dependent magnetoresistance when studied at limited dimensions. In particular, the recent demonstration of superconductivity in WTe2 monolayer suggests that realizing nanowire geometry for WTe2 may be important to investigate potential Majorana zero modes predicted in one-dimensional topological superconductors. In this work, we demonstrate a large-yield, low-temperature synthesis of WTe2 nanowires, an approximate one-dimensional system, by converting WO3 nanowires via tellurization. The nanowires are single crystalline and have a higher resistivity than WTe2 exfoliated flakes with similar thickness. The increased resistivity is attributed to increased scattering from imperfect surfaces and higher surface-to-volume ratios of the WTe2 nanowires. We demonstrate that the synthesis method is generalizable to other transition-metal dichalcogenides, laying the foundation for further study of this class of materials in the one-dimensional limit.
RESUMO
Using the MoS2 -WTe2 heterostructure as a model system combined with electrochemical microreactors and density function theory calculations, it is shown that heterostructured contacts enhance the hydrogen evolution reaction (HER) activity of monolayer MoS2 . Two possible mechanisms are suggested to explain this enhancement: efficient charge injection through large-area heterojunctions between MoS2 and WTe2 and effective screening of mirror charges due to the semimetallic nature of WTe2 . The dielectric screening effect is proven minor, probed by measuring the HER activity of monolayer MoS2 on various support substrates with dielectric constants ranging from 4 to 300. Thus, the enhanced HER is attributed to the increased charge injection into MoS2 through large-area heterojunctions. Based on this understanding, a MoS2 /WTe2 hybrid catalyst is fabricated with an HER overpotential of -140 mV at 10 mA cm-2 , a Tafel slope of 40 mV dec-1 , and long stability. These results demonstrate the importance of interfacial design in transition metal dichalcogenide HER catalysts. The microreactor platform presents an unambiguous approach to probe interfacial effects in various electrocatalytic reactions.
RESUMO
For the electrochemical hydrogen evolution reaction (HER), the electrical properties of catalysts can play an important role in influencing the overall catalytic activity. This is particularly important for semiconducting HER catalysts such as MoS2 , which has been extensively studied over the last decade. Herein, on-chip microreactors on two model catalysts, semiconducting MoS2 and semimetallic WTe2 , are employed to extract the effects of individual factors and study their relations with the HER catalytic activity. It is shown that electron injection at the catalyst/current collector interface and intralayer and interlayer charge transport within the catalyst can be more important than thermodynamic energy considerations. For WTe2 , the site-dependent activities and the relations of the pure thermodynamics to the overall activity are measured and established, as the microreactors allow precise measurements of the type and area of the catalytic sites. The approach presents opportunities to study electrochemical reactions systematically to help establish rational design principles for future electrocatalysts.
RESUMO
Recent renewed interest in layered transition metal dichalcogenides stems from the exotic electronic phases predicted and observed in the single- and few-layer limit. Realizing these electronic phases requires preserving the desired transport properties down to a monolayer, which is challenging. Surface oxides are known to impart Fermi level pinning or degrade the mobility on a number of different systems, including transition metal dichalcogenides and black phosphorus. Semimetallic WTe2 exhibits large magnetoresistance due to electron-hole compensation; thus, Fermi level pinning in thin WTe2 flakes could break the electron-hole balance and suppress the large magnetoresistance. We show that WTe2 develops an â¼2 nm thick amorphous surface oxide, which shifts the Fermi level by â¼300 meV at the WTe2 surface. We also observe a dramatic suppression of the magnetoresistance for thin flakes. However, due to the semimetallic nature of WTe2, the effects of Fermi level pinning are well screened and are not the dominant cause for the suppression of magnetoresistance, supported by fitting a two-band model to the transport data, which showed the electron and hole carrier densities are balanced down to â¼13 nm. However, the fitting shows a significant decrease of the mobilities of both electrons and holes. We attribute this to the disorder introduced by the amorphous surface oxide layer. Thus, the decrease of mobility is the dominant factor in the suppression of magnetoresistance for thin WTe2 flakes. Our study highlights the critical need to investigate often unanticipated and sometimes unavoidable extrinsic surface effects on the transport properties of layered dichalcogenides and other 2D materials.
RESUMO
Transition metal dichalcogenides (TMDCs) are a promising class of two-dimensional (2D) materials for use in applications such as 2D electronics, optoelectronics, and catalysis. Due to the van der Waals (vdW) bonding between layers, vdW heterostructures can be constructed between two different species of TMDCs. Most studies employ exfoliation or co-vapor growth schemes, which are limited by the small size and uneven distribution of heterostructures on the growth substrate. In this work we demonstrate a one-step synthesis procedure for large-area vdW heterostructures between horizontal TMDCs MoS2 and WS2. The synthesis procedure is scalable and provides patterning ability, which is critical for electronic applications in integrated circuits. We demonstrate rectification characteristics of large-area MoS2/WS2 stacks. In addition, hydrogen evolution reaction performance was measured in these horizontal MoS2 and WS2 thin films, which indicate that, in addition to the catalytically active sulfur edge sites, defect sites may serve as catalyst sites.
RESUMO
Two-dimensional (2D), layered transition metal dichalcogenides (TMDCs) can grow in two different growth directions, that is, horizontal and vertical. In the horizontal growth, 2D TMDC layers grow in planar direction with their basal planes parallel to growth substrates. In the vertical growth, 2D TMDC layers grow standing upright on growth substrates exposing their edge sites rather than their basal planes. The two distinct morphologies present unique materials properties suitable for specific applications, such as horizontal TMDCs for optoelectronics and vertical TMDCs for electrochemical reactions. Precise control of the growth orientation is essential for realizing the true potential of these 2D materials for large-scale, practical applications. In this Letter, we investigate the transition of vertical-to-horizontal growth directions in 2D molybdenum (or tungsten) disulfide and study the underlying growth mechanisms and parameters that dictate such transition. We reveal that the thickness of metal seed layers plays a critical role in determining their growth directions. With thick (>â¼ 3 nm) seed layers, the vertical growth is dominant, while the horizontal growth occurs with thinner seed layers. This finding enables the synthesis of novel 2D TMDC heterostructures with anisotropic layer orientations and transport properties. The present study paves a way for developing a new class of 2D TMDCs with unconventional materials properties.