Investigating the impact of HMI on drivers' merging performance in intelligent connected vehicle environment.

Intelligent Connected Vehicle (ICV) is considered one of the most promising active safety technologies to address current transportation challenges. Human-Machine Interface (HMI) plays a vital role in enhancing user driving experience with ICV technology. However, in an ICV environment, drivers may exhibit excessive reliance on HMI, resulting in diminished proactive observation and analysis of the road environment, and subsequently leading to a potential decrease in drivers' situational awareness. This reduced situational awareness may consequently lead to a decline in their overall engagement in driving tasks. Therefore, to comprehensively investigate the impact of HMI on driver performance in various ICV environments, this study incorporates three distinct HMI systems: Control group, Warning group, and Guidance group. The Control group provides basic information, the Warning group adds front vehicle icon and real-time headway information, while the Guidance group further includes speed and voice guidance features. Additionally, the study considers three types of mainline vehicle gaps, namely, 30 m, 20 m, and 15 m. Through our self-developed ICV testing platform, we conducted driving simulation experiments on 43 participants in a freeway interchange merging area. The findings reveal that, drivers in the Guidance group exhibited explicit acceleration while driving on the ramp. Drivers in the Guidance and Warning groups demonstrated smoother speed change trends and lower mean longitudinal acceleration upon entering the acceleration lane compared to the Control group, indicating a preference for more cautious driving strategies. During the pre-merging section, drivers in the Warning group demonstrated a more cautious and smooth longitudinal acceleration. The Guidance group's HMI system assisted drivers in better speed control during the post-merging section. Differences in mainline vehicle gaps did not significantly impact the merging positions of participants across the three HMI groups. Drivers in the Guidance group merged closest to the left side of the taper section, while the Control group merged farthest. The research findings offer valuable insights for developing dynamic human-machine interfaces tailored to specific driving scenarios in the environment of ICVs. Future research should investigate the effects of various HMIs on driver safety, workload, energy efficiency, and overall driving experience. Conducting real-world tests will further validate the findings obtained from driving simulators.

Does a faster takeover necessarily mean it is better? A study on the influence of urgency and takeover-request lead time on takeover performance and safety.

During conditionally automated driving, drivers are sometimes required to take over control of the vehicle if a so-called takeover request (TOR) is issued. TORs are generally issued due to system limitations. This study investigated the effect of different urgency scenarios and takeover-request lead times (TORlts) on takeover performance and safety. The experiment was conducted in a real vehicle-based driving simulator. Manual driving, 7-second TORlt and 5-second TORlt were each tested. Participants experienced three progressively urgent driving scenarios: one cut-in scenario and two obstacle-avoidance scenarios. The results indicate that the TORlt significantly affected takeover performance and safety. Within a certain range, the longer the TORlt, the safer the takeover. However, while takeover reaction time depended mainly on the length of the TORlt and was not significantly related to other factors, such as workload, greater workloads that were caused by the TORlt were associated with shorter reaction times and decreased safety. This is evidence that the reaction time should not be used as the preferred indicator to evaluate takeover performance and safety. Indicators, such as workload, minimum TTC, feature point distribution position and slope of the obstacle avoidance trajectory, can better measure and evaluate takeover performance and safety. This study can provide data support for takeover safety evaluation of conditionally automated driving.

Analyzing the Influencing Factors and Workload Variation of Takeover Behavior in Semi-Autonomous Vehicles.

There are many factors that will influence the workload of drivers during autonomous driving. To examine the correlation between different factors and the workload of drivers, the influence of different factors on the workload variations is investigated from subjective and objective viewpoints. Thirty-seven drivers were recruited to participant the semi-autonomous driving experiments, and the drivers were required to complete different NDRTs (Non-Driving-Related Tasks): mistake finding, chatting, texting, and monitoring when the vehicle is in autonomous mode. Then, we introduced collision warning to signal there is risk ahead, and the warning signal was triggered at different TB (Time Budget)s before the risk, at which time the driver had to take over the driving task. During driving, the NASA-TLX-scale data were obtained to analyze the variation of the driver's subjective workload. The driver's pupil-diameter data acquired by the eye tracker from 100 s before the TOR (Take-Over Request) to 19 s after the takeover were obtained as well. The sliding time window was set to process the pupil-diameter data, and the 119-s normalized average pupil-diameter data under different NDRTs were fitted and modeled to analyze the variation of the driver's objective workload. The results show that the total subjective workload score under the influence of different factors is as follows: obstacle-avoidance scene > lane-keeping scene; TB = 7 s and TB = 3 s have no significant difference; and mistake finding > chatting > texting > monitoring. The results of pupil-diameter data under different factors are as follows: obstacle-avoidance scene > lane-keeping scene; TB = 7 s > TB = 3 s; and monitoring type (chatting and monitoring) > texting type (mistake finding and texting). The research results can provide a reference for takeover safety prediction modeling based on workload.

Ego-Lane Index Estimation Based on Lane-Level Map and LiDAR Road Boundary Detection.

Correct ego-lane index estimation is essential for lane change and decision making for intelligent vehicles, especially in global navigation satellite system (GNSS)-challenged environments. To achieve this, we propose an ego-lane index estimation approach in an urban scenario based on particle filter (PF). The particles are initialized and propagated by dead reckoning with inertial measurement unit (IMU) and odometry. A lane-level map is used to navigate the particles taking advantage of topologic and geometric information of lanes. GNSS single-point positioning (SPP) can provide position estimation with meter-level accuracy in urban environments, which can limit drift introduced by dead reckoning for updating the weight of each particle. Light detection and ranging (LiDAR) is a common sensor in an intelligent vehicle. A LiDAR-based road boundary detection method provides distance measurements from the vehicle to the left/right road boundaries, which provides a measurement for importance weighting. However, the high precision of the LiDAR measurements may put a tight constraint on the distribution of particles, which can lead to particle degeneration with sparse particle sets. To deal with this problem, we propose a novel step that shifts particles laterally based on LiDAR measurements instead of importance weighting in the traditional PF scheme. We tested our methods on an urban expressway at a low traffic volume period to ensure road boundaries can be detected by LiDAR measurements at most time steps. Experimental results prove that our improved PF scheme can correctly estimate ego-lane index at all time steps, while the traditional PF scheme produces wrong estimations at some time steps.

A Bibliometric and Visualized Overview for the Evolution of Process Safety and Environmental Protection.

This paper presents a bibliometric overview of the publications in the principal international journal Process Safety and Environmental Protection (PSEP) from 1990 to 2020 retrieved in the Web of Science (WoS) database to explore the evolution in safety and environmental engineering design and practice, as well as experimental or theoretical innovative research. Therefore, based on the WoS database and the visualization of similarities (VOS) viewer software, the bibliometric analysis and scientometric mapping of the literature have been performed from the perspectives of document types, publication and citation distribution over time, leading authors, countries (regions), institutions, the corresponding collaboration networks, most cited publications and references, focused research fields and topics, research trend evolution over time, etc. The paper provides a comprehensive and quantitative overview and significant picture representation for the journal's leading and evolutionary trends by employing specific aforementioned bibliometric analysis factors. In addition, by reviewing the evolutionary trends of the journal and the proposed investigated factors, such as the influential works, main research topics, and the research frontiers, this paper reveals the scientific literature production's main research objectives and directions that could be addressed and explored in future studies.

Novel Time-Delay Side-Collision Warning Model at Non-Signalized Intersections Based on Vehicle-to-Infrastructure Communication.

In complex traffic environments, collision warning systems that rely only on in-vehicle sensors are limited in accuracy and range. Vehicle-to-infrastructure (V2I) communication systems, however, offer more robust information exchange, and thus, warnings. In this study, V2I was used to analyze side-collision warning models at non-signalized intersections: A novel time-delay side-collision warning model was developed according to the motion compensation principle. This novel time-delay model was compared with and verified against a traditional side-collision warning model. Using a V2I-oriented simulated driving platform, three vehicle-vehicle collision scenarios were designed at non-signalized intersections. Twenty participants were recruited to conduct simulated driving experiments to test and verify the performance of each collision warning model. The results showed that compared with no warning system, both side-collision warning models reduced the proportion of vehicle collisions. In terms of efficacy, the traditional model generated an effective warning in 84.2% of cases, while the novel time-delay model generated an effective warning in 90.2%. In terms of response time and conflict time difference, the traditional model gave a longer response time of 0.91 s (that of the time-delay model is 0.78 s), but the time-delay model reduced the driving risk with a larger conflict time difference. Based on an analysis of driver gaze change post-warning, the statistical results showed that the proportion of effective gaze changes reached 84.3%. Based on subjective evaluations, drivers reported a higher degree of acceptance of the time-delay model. Therefore, the time-delay side-collision warning model for non-signalized intersections proposed herein can improve the applicability and efficacy of warning systems in such complex traffic environments and provide reference for safety applications in V2I systems.

Traffic climate and driver behaviors: The moderating role of driving skills in Turkey and China.

INTRODUCTION: While road traffic accidents and fatalities are a worldwide problem, the rates of road traffic accidents and fatalities show differences among countries. Similarly, driver behaviors, traffic climate, and their relationships also show differences among countries. The aim of the current study is to investigate the moderating effect of driving skills on the relationship between traffic climate and driver behaviors by country. (Turkey and China). METHOD: There were 294 Turkish drivers and 292 Chinese drivers, and they completed the Traffic Climate Scale, the Driving Skills Inventory, and the Driver Behavior Questionnaire. The moderated moderation analyses were conducted with Hayes PROCESS tool on SPSS. RESULTS: The results showed that safety skills moderated the relationship between internal requirements and violations both in Turkey and China. Safety skills also moderated the relationship between internal requirements and errors only in China and the relationship between functionality and violations in Turkey. Perceptual-motor skills moderated the relationships between external affective demands and errors, and also the relationship between internal requirements and positive driver behaviors in Turkey. It can be inferred that driving skills has different influences on traffic climate-driver behaviors relationship in different cultures and there might be cultural differences in the evaluation of drivers' own driving skills. Practical Applications: Among driving skills, safety skills have a more critical role to increase road safety by decreasing number of violations. Interventions to increase safety skills of drivers might be promising for road safety.

Rear-end collision warning of connected automated vehicles based on a novel stochastic local multivehicle optimal velocity model.

Studying the rear-end early warning methods of connected automated vehicles (CAVs) is useful for issuing early warnings and reducing traffic accidents. Establishing a corresponding driving model according to CAV characteristics is necessary when designing intelligent decision and control systems, especially for the safety speed threshold. However, since traffic systems are stochastic, there are random factors that influence car-following behavior. Therefore, this study proposes a rear-end collision warning method for CAVs based on a stochastic local multivehicle optimal speed (SLMOV) car-following model. First, the SLMOV model is proposed to characterize the car-following behavior of CAVs. Simultaneously, a stability analysis and parameter estimation method are discussed. Second, the safety distance between the CAVs changes with time because the speed of the rear vehicles satisfies the SLMOV model, which is used to calculate the safety probability of rear-end CAV collisions through an analysis of the driving process. The speed threshold is assessed by controlling the rear-end collision probability. Third, next-generation simulation (NGSIM) data are used in an empirical analysis of a rear-end collision warning method on the basis of a parameter estimation of the SLMOV model. The results present the speed thresholds of vehicles under different braking deceleration levels. Finally, the merits and demerits of fixed-speed and variable-speed adjustment time intervals are compared by considering driving safety and comfort as evaluation indexes. A reasonable CAV adjustment time interval of 0.4 s is determined. This result can be used to help develop a vehicle loading rear-end collision warning system.

Driving behavior and safety analysis at OSMS section for merged, one-way freeway based on simulated driving safety analysis of driving behaviour.

In order to study driving performance at the opening section of median strip (hereafter OSMS) on the freeway capacity expansion project, this study separately controlled 9 different simulated experimental scenarios of OSMS length and freeway traffic flow. 25 participants were recruited to perform 225 simulated driving tests using the driving simulator, and the analysis of variance (ANOVA) was used to analyze the driving characteristics which can represent the safety context. The results show that the safety parameters of driving are different when the length of OSMS and the traffic flow are different. When the traffic flow is low or moderate, the OSMS length can significantly affect the speed of the vehicle and the maximum values of time to collision. The higher the traffic flow, the smaller the minimum values of time headway. As the length of the OSMS decreases, the vehicles are more generally concentrated at the end of the opening area with the minimum values of time headway. The study also found that when the traffic volume is high, the impact of the OSMS length on driving performance will be weakened. In addition, the OSMS length and the traffic flow have little impact on driving comfort. Additionally, when the traffic flow is low or moderate, the opening length can significantly affect the driving behavior and safety of the vehicle. However, when the traffic volume is high, the impact of the opening length on them will be relatively weakened to some extent. Therefore, it is advised that in the case of freeways with large traffic volume, merely extending the length of the opening section does not necessarily optimize safety. Rather, the actual traffic density of the road should be carefully considered before a design length is adopted.

A novel feature extraction model for traffic injury severity and its application to Fatality Analysis Reporting System data analysis.

The prevention of severe injuries during crashes has become one of the leading issues in traffic management and transportation safety. Identifying the impact factors that affect traffic injury severity is critical for reducing the occurrence of severe injuries. In this study, the Fatality Analysis Reporting System data are selected as the dataset for the analysis. An algorithm named improved Markov Blanket was proposed to extract the significant and common factors that affect crash injury severity from 29 variables related to driver characteristics, vehicle characteristics, accidents types, road condition, and environment characteristics. The Pearson correlation coefficient test is applied to verify the significant correlation between the selected factors and traffic injury severity. Two widely used classification algorithms (Bayesian networks and C4.5 decision tree) were employed to evaluate the performance of the proposed feature selection algorithm. The calculation result of the correlation coefficient, accuracy of classification, and classification error rate indicated that the improved Markov Blanket not only could extract the significant impact factors but could also improve the accuracy of classification. Meanwhile, the relationship between five selected factors (atmospheric condition, time of crash, alcohol test result, crash type, and driver's distraction) and traffic injury severity was also analyzed in this study. The results indicated that crashes occurred in bad weather condition (e.g. fog or worse), in night time, in drunk driving, in crash type of single driver, and in distracted driving, which are associated with more severe injuries.

Quick mass-production of MAX (Ti2AlC) book with pages separated by stacking faults benefiting removal of "A" layer.

A creative and universal technique, magnetism and vortex current coupling growth (MVC), has been developed for the super-rapid mass-production of the layered MAX (Ti2AlC) phase. The book-like MAX grows from the bottom to the top layer by layer, separated by stacking faults to benefit the removal of the "A" layer from MAX.

Traffic climate, driver behaviour, and accidents involvement in China.

Traffic Climate Scale (TCS) and Positive Driver Behaviours Scale (PDBS) are new measurement tools. The study aims to translate the TCS and PDBS into Chinese and to assess their factor structures in a large sample of licensed motor vehicle drivers in China. A further aim is to investigate the effects of TCS factors on drivers' behaviours and traffic accidents involvement. Data were collected using an online survey. Participants were 887 fully licensed motor vehicle drivers, including 531 males and 356 females who completed a Chinese translated questionnaire including the TCS, PDBS, Driver Behaviour Questionnaire (DBQ), items related to drivers' driving records and demographic characteristics. The result of the exploratory factor analysis revealed clear three-factor solution ('Functionality', 'External affective demand' and 'Internal requirement') of TCS with high item loadings and acceptable internal consistency coefficients. The convergent validity of the Chinese TCS was supported by its relationship with driver behaviour factors (violations, errors, lapses and positive behaviours), the traffic accidents involvement and demographic characteristics. The results further show that the external affective demand consistently and positively relate to aberrant behaviours and negatively relate to positive behaviours with indirect positive significant effects on accidents involvement. Functionality is concurrently and negatively related to aberrant behaviours and positively related to positive behaviours with no effects on accidents involvement. The internal requirement is negatively related to aberrant behaviours but, positively related to positive behaviours with positive significant direct effects on accidents involvement.

The effect of gender, occupation and experience on behavior while driving on a freeway deceleration lane based on field operational test data.

Deceleration lanes improve traffic flow by reducing interference, increasing capacity and enhancing safety. However, accident rates are higher on these interchange segments than on other freeway segments. It is important to attempt to reduce traffic accidents on these interchange segments by further exploring the behavior of different types of drivers on a highway deceleration lane. In this study, with field operational test (FOT) data from 89 driving instances (derived from 46 participants driving the test road twice) on a typical freeway deceleration lane, section speed profiles, vehicle trajectories, lane position and other key parameters were obtained. The lane-change characteristics and speed profiles of drivers with different genders, occupations and experiences were analyzed. The significant disparities between them reflects the risk associated with different groups of drivers. The study shows that male drivers changed to the outside lane earlier; professional drivers and experienced drivers made the last lane change as early as possible to enter the deceleration lane; and the speed of the vehicles entering the exit ramp was significantly higher than the speed limit. This research work provides ground truth data for deceleration lane design, driver ability training and off-ramp traffic safety management.

Driving style recognition method using braking characteristics based on hidden Markov model.

Since the advantage of hidden Markov model in dealing with time series data and for the sake of identifying driving style, three driving style (aggressive, moderate and mild) are modeled reasonably through hidden Markov model based on driver braking characteristics to achieve efficient driving style. Firstly, braking impulse and the maximum braking unit area of vacuum booster within a certain time are collected from braking operation, and then general braking and emergency braking characteristics are extracted to code the braking characteristics. Secondly, the braking behavior observation sequence is used to describe the initial parameters of hidden Markov model, and the generation of the hidden Markov model for differentiating and an observation sequence which is trained and judged by the driving style is introduced. Thirdly, the maximum likelihood logarithm could be implied from the observable parameters. The recognition accuracy of algorithm is verified through experiments and two common pattern recognition algorithms. The results showed that the driving style discrimination based on hidden Markov model algorithm could realize effective discriminant of driving style.

Safety and Health Perceptions in Work-related Transport Activities in Ghanaian Industries.

BACKGROUND: With the recent rapid industrialization, occupational safety and health (OSH) has become an important issue in all industrial and human activities. However, incidents of injuries and fatality rates in the Ghanaian industry sector continue to increase. Despite this increase, there is no evidence regarding the element of OSH management in transport activities in Ghanaian industries. Thus, this study aims to examine the perceptions regarding the importance of safety and health in work-related transport activities in Ghanaian industries. METHODS: A survey data collection technique was used to gather information on best safety practices over a 5-month period. We randomly selected 298 respondents from industries to answer structured questionnaires. The respondents included drivers, transport managers, and safety engineers. Standard multiple regression model and Pearson product-movement correlation were used to performed the analysis. RESULTS: The result shows that for interventions to improve safety and health, concentration has been on drivers' safety practice with less attention to safe driving environments and vehicle usage. Additionally, the respondents are aware of the importance of OSH in transport activities, but the level of integration does not measure up to the standard to reduce operational accidents and injuries. Finally, strong commitment to changing unsafe practices at all levels of operations appears to be the effective way to improve safety situations. CONCLUSION: OSH culture is not fully complied in industries transport activities. This study, therefore, supports the use of safety seminars and training sessions for industry workers responsible for transport operations for better integration of safety standards.

Modeling Vehicle Collision Angle in Traffic Crashes Based on Three-Dimensional Laser Scanning Data.

In road traffic accidents, the analysis of a vehicle's collision angle plays a key role in identifying a traffic accident's form and cause. However, because accurate estimation of vehicle collision angle involves many factors, it is difficult to accurately determine it in cases in which less physical evidence is available and there is a lack of monitoring. This paper establishes the mathematical relation model between collision angle, deformation, and normal vector in the collision region according to the equations of particle deformation and force in Hooke's law of classical mechanics. At the same time, the surface reconstruction method suitable for a normal vector solution is studied. Finally, the estimation model of vehicle collision angle is presented. In order to verify the correctness of the model, verification of multi-angle collision experiments and sensitivity analysis of laser scanning precision for the angle have been carried out using three-dimensional (3D) data obtained by a 3D laser scanner in the collision deformation zone. Under the conditions with which the model has been defined, validation results show that the collision angle is a result of the weighted synthesis of the normal vector of the collision point and the weight value is the deformation of the collision point corresponding to normal vectors. These conclusions prove the applicability of the model. The collision angle model proposed in this paper can be used as the theoretical basis for traffic accident identification and cause analysis. It can also be used as a theoretical reference for the study of the impact deformation of elastic materials.

Perceived enjoyment, concentration, intention, and speed violation behavior: Using flow theory and theory of planned behavior.

OBJECTIVE: Road accidents are an important public health concern, and speeding is a major contributor. Although flow theory (FLT) is a valid model for understanding behavior, currently the nature of the roles and interplay of FLT constructs within the theory of planned behavior (TPB) framework when attempting to explain the determinants of motivations for intention to speed and speeding behavior of car drivers is not yet known. The study aims to synthesize TPB and FLT in explaining drivers of advanced vehicles intentions to speed and speed violation behaviors and evaluate factors that are critical for explaining intention and behavior. METHOD: The hypothesized model was validated using a sample collected from 354 fully licensed drivers of advanced vehicles, involving 278 males and 76 females on 2 occasions separated by a 3-month interval. During the first of the 2 occasions, participants completed questionnaire measures of TPB and FLT variables. Three months later, participants' speed violation behaviors were assessed. RESULTS: The study observed a significant positive relationship between the constructs. The proposed model accounted for 51 and 45% of the variance in intention to speed and speed violation behavior, respectively. The independent predictors of intention were enjoyment, attitude, and subjective norm. The independent predictors of speed violation behavior were enjoyment, concentration, intention, and perceived behavioral control. CONCLUSIONS: The findings suggest that safety interventions for preventing speed violation behaviors should be aimed at underlying beliefs influencing the speeding behaviors of drivers of advanced vehicles. Furthermore, perceived enjoyment is of equal importance to driver's intention, influencing speed violation behavior.

Driver's Cognitive Workload and Driving Performance under Traffic Sign Information Exposure in Complex Environments: A Case Study of the Highways in China.

Complex traffic situations and high driving workload are the leading contributing factors to traffic crashes. There is a strong correlation between driving performance and driving workload, such as visual workload from traffic signs on highway off-ramps. This study aimed to evaluate traffic safety by analyzing drivers' behavior and performance under the cognitive workload in complex environment areas. First, the driving workload of drivers was tested based on traffic signs with different quantities of information. Forty-four drivers were recruited to conduct a traffic sign cognition experiment under static controlled environment conditions. Different complex traffic signs were used for applying the cognitive workload. The static experiment results reveal that workload is highly related to the amount of information on traffic signs and reaction time increases with the information grade, while driving experience and gender effect are not significant. This shows that the cognitive workload of subsequent driving experiments can be controlled by the amount of information on traffic signs. Second, driving characteristics and driving performance were analyzed under different secondary task driving workload levels using a driving simulator. Drivers were required to drive at the required speed on a designed highway off-ramp scene. The cognitive workload was controlled by reading traffic signs with different information, which were divided into four levels. Drivers had to make choices by pushing buttons after reading traffic signs. Meanwhile, the driving performance information was recorded. Questionnaires on objective workload were collected right after each driving task. The results show that speed maintenance and lane deviations are significantly different under different levels of cognitive workload, and the effects of driving experience and gender groups are significant. The research results can be used to analyze traffic safety in highway environments, while considering more drivers' cognitive and driving performance.

Identification of common features of vehicle motion under drowsy/distracted driving: A case study in Wuhan, China.

Drowsy/distracted driving has become one of the leading causes of traffic crash. Only certain particular drowsy/distracted driving behaviors have been studied by previous studies, which are mainly based on dedicated sensor devices such as bio and visual sensors. The objective of this study is to extract the common features for identifying drowsy/distracted driving through a set of common vehicle motion parameters. An intelligent vehicle was used to collect vehicle motion parameters. Fifty licensed drivers (37 males and 13 females, M=32.5 years, SD=6.2) were recruited to carry out road experiments in Wuhan, China and collecting vehicle motion data under four driving scenarios including talking, watching roadside, drinking and under the influence of drowsiness. For the first scenario, the drivers were exposed to a set of questions and asked to repeat a few sentences that had been proved valid in inducing driving distraction. Watching roadside, drinking and driving under drowsiness were assessed by an observer and self-reporting from the drivers. The common features of vehicle motions under four types of drowsy/distracted driving were analyzed using descriptive statistics and then Wilcoxon rank sum test. The results indicated that there was a significant difference of lateral acceleration rates and yaw rate acceleration between "normal driving" and drowsy/distracted driving. Study results also shown that, under drowsy/distracted driving, the lateral acceleration rates and yaw rate acceleration were significantly larger from the normal driving. The lateral acceleration rates were shown to suddenly increase or decrease by more than 2.0m/s(3) and the yaw rate acceleration by more than 2.5°/s(2). The standard deviation of acceleration rate (SDA) and standard deviation of yaw rate acceleration (SDY) were identified to as the common features of vehicle motion for distinguishing the drowsy/distracted driving from the normal driving. In order to identify a time window for effectively extracting the two common features, a double-window method was used and the optimized "Parent Window" and "Child Window" were found to be 55s and 6s, respectively. The study results can be used to develop a driving assistant system, which can warn drivers when any one of the four types of drowsy/distracted driving is detected.

Motor vehicle-bicycle crashes in Beijing: irregular maneuvers, crash patterns, and injury severity.

This research presents a comprehensive analysis of motor vehicle-bicycle crashes using 4 years of reported crash data (2004-2007) in Beijing. The interrelationship of irregular maneuvers, crash patterns and bicyclist injury severity are investigated by controlling for a variety of risk factors related to bicyclist demographics, roadway geometric design, road environment, etc. Results show that different irregular maneuvers are correlated with a number of risk factors at different roadway locations such as the bicyclist age and gender, weather and traffic condition. Furthermore, angle collisions are the leading pattern of motor vehicle-bicycle crashes, and different irregular maneuvers may lead to some specific crash patterns such as head-on or rear-end crashes. Orthokinetic scrape is more likely to result in running over bicyclists, which may lead to more severe injury. Moreover, bicyclist injury severity level could be elevated by specific crash patterns and risk factors including head-on and angle collisions, occurrence of running over bicyclists, night without streetlight, roads without median/division, higher speed limit, heavy vehicle involvement and older bicyclists. This study suggests installation of median, division between roadway and bikeway, and improvement of illumination on road segments. Reduced speed limit is also recommended at roadway locations with high bicycle traffic volume. Furthermore, it may be necessary to develop safety campaigns aimed at male, teenage and older bicyclists.