Dendrite-Free All-Solid-State Lithium Metal Batteries by In Situ Phase Transformation of the Soft Carbon-Li3N Interface Layer.

The accelerated formation of lithium dendrites has considerably impeded the advancement and practical deployment of all-solid-state lithium metal batteries (ASSLMBs). In this study, a soft carbon (SC)-Li3N interface layer was developed with both ionic and electronic conductivity, for which the in situ lithiation reaction not only lithiated SC into LiC6 with good electronic/ionic conductivity but also successfully transformed the mixed-phase Li3N into pure-phase ß-Li3N with a high ionic conductivity/ion diffusion coefficient and stability to lithium metal. The mixed conductive interface layer facilitates fast Li+ transport at the interface and induces the homogeneous deposition of lithium metal inside it. This effectively inhibits the formation of lithium dendrites and greatly improves the performance of the ASSLMB. The ASSLMB assembled with the SC-Li3N interface layer exhibits high areal capacity (15 mA h cm-2), high current density (7.5 mA cm-2), and long cycle life (6000 cycles). These results indicate that this interface layer has great potential for practical applications in high-energy-density ASSLMBs.

Soft Carbon-Thiourea with Fast Bulk Diffusion Kinetics for Solid-State Lithium Metal Batteries.

The development of all-solid-state lithium-metal batteries (ASSLMBs) is impeded by low coulomb efficiency, short lifetime, poor rate performance, and other problems caused by the rapid growth of lithium (Li) dendrites. Herein, a multiple-diffusion-channel N,S-doped soft carbon with expanded layer spacing is designed/developed by thiourea calcination for dendrite-free anodes. Since the enlarged layer spacing can improve Li+ transportation rate within the layers and N,S-doping can facilitate Li+ transport between the layers, the bulk phase diffusion (not just surface diffusion) kinetics can be improved, which in turn reduces the local current density, inhibits the growth of Li dendrites, and improves the rate performance. The resulting ASSLMB achieves record-high current density (15 mA cm-2 ), areal capacity (20 mAh cm-2 ), energy density (403 Wh kg-1 ), and ultra-long cycle life (13 000 cycles). >305 Wh kg-1 pouch cells are realized, representing one of the most critical breakthroughs for real-world application of ASSLMBs.

Experimental Corroboration of Lithium Orthothioborate Superionic Conductor by Systematic Elemental Manipulation.

The Li superionic conductor Li3BS3 has been theoretically predicted as an ideal solid electrolyte (SE) due to its low Li+ migration energy barrier and high ionic conductivity. However, the experimentally synthesized Li3BS3 has a 104 times lower ionic conductivity. Herein, we investigate the effect of a series of cation and anion substitutions in Li3BS3 SE on its ionic conductivity, including Li3-xM0.05BS3 (M = Cu, Zn, Sn, P, W, x = 0.05, 0.1, 0.2, 0.25), Li3-yBS2.95X0.05 (X = O, Cl, Br, I, y = 0.05, 0.1) and Li2.75-xP0.05BS3-xClx (x = 0.05, 0.1, 0.15, 0.2, 0.4, 0.6). Amorphous ionic conductor Li2.55P0.05BS2.8Cl0.2 has a high ion conductivity of 0.52 mS cm-1 at room temperature with an activation energy of 0.41 eV. The electrochemical performance of all-solid-state batteries with Li2.55P0.05BS2.8Cl0.2 SEs show stable cycling with a discharge capacity retention of >97% after 200 cycles at 1C under 55 °C.

Realizing long-cycling all-solid-state Li-In||TiS2 batteries using Li6+xMxAs1-xS5I (M=Si, Sn) sulfide solid electrolytes.

Inorganic sulfide solid-state electrolytes, especially Li6PS5X (X = Cl, Br, I), are considered viable materials for developing all-solid-state batteries because of their high ionic conductivity and low cost. However, this class of solid-state electrolytes suffers from structural and chemical instability in humid air environments and a lack of compatibility with layered oxide positive electrode active materials. To circumvent these issues, here, we propose Li6+xMxAs1-xS5I (M=Si, Sn) as sulfide solid electrolytes. When the Li6+xSixAs1-xS5I (x = 0.8) is tested in combination with a Li-In negative electrode and Ti2S-based positive electrode at 30 °C and 30 MPa, the Li-ion lab-scale Swagelok cells demonstrate long cycle life of almost 62500 cycles at 2.44 mA cm-2, decent power performance (up to 24.45 mA cm-2) and areal capacity of 9.26 mAh cm-2 at 0.53 mA cm-2.

Stable Interface between Sulfide Solid Electrolyte and Room-Temperature Liquid Lithium Anode.

Sulfide solid electrolytes (SEs) are considered to be some of the most promising SEs for commercialization due to their high ionic conductivity, good mechanical ductility, and good interfacial contact with electrodes. The Ohmic resistance of solid-state batteries assembled with sulfide SEs is significantly reduced, but the problem of high interfacial impedance due to poor interfacial chemical/electrochemical stability between sulfide SEs and the electrodes is serious. Therefore, the formation and evolution of the electrode/sulfide SE interface during battery assembly and cycling have a crucial impact on the performance of the battery, which is one of the key issues to be solved in battery commercialization. Herein, a variety of compatible interface protective layers, including PEO and ß-Li3PS4/S, are obtained between sulfide SEs and ether-based room-temperature liquid lithium anodes for long-term stable cycling of >1000 h. Such a technical method for stabilizing the solid-liquid interface between a sulfide SE and an organic liquid lithium anode successfully solves the key problem of interfacial side reactions, making this battery configuration safe and stable for long-cycle operation.