RESUMO
Anterior talofibular ligament injuries and osteochondral lesions of the talus present unique challenges to orthopedic surgeons. This study aimed to investigate the relevant relationship between them by analyzing the Magnetic resonance imaging (MRI) results of clinical patients and single-cell RNA sequence (scRNA seq) results of healthy talus cartilage to discuss the risk factors. Data from 164 patients from 2018 to 2023 was retrospectively analyzed. The correlation analysis between ATFL injury grade and the Hepple stage of OLT determined by MRI was performed. Publicly available single-cell RNA datasets were collected. Single-cell RNA datasets from five volunteers of healthy talus cartilage were analyzed. ATFL injury grade was relevant with the Hepple stage of OLT (P < 0.05). The results of multivariate logistic regression analysis showed that injured area was the independent influencing factor of the incidence rate and the severity of OLT (P < 0.05). The Hepple stage of OLT was relevant with AOFAS and VAS (P < 0.05). Single-cell RNA sequence results showed that among the 9 subtypes of chondrocytes, the interaction strength between HTC-A and HTC-B is the highest. Their physical interactions are mainly achieved through the CD99 signaling pathway, and factor interactions are mainly achieved through the ANGPTL signaling pathway. Anterior talofibular ligament injury may lead to osteochondral lesions of the talus. Early medical intervention should be carried out for ligament injuries to restore joint stability and avoid cartilage damage.
Assuntos
Ligamentos Laterais do Tornozelo , Imageamento por Ressonância Magnética , Tálus , Humanos , Tálus/lesões , Tálus/diagnóstico por imagem , Imageamento por Ressonância Magnética/métodos , Masculino , Feminino , Adulto , Estudos Retrospectivos , Ligamentos Laterais do Tornozelo/lesões , Ligamentos Laterais do Tornozelo/diagnóstico por imagem , Adulto Jovem , Pessoa de Meia-Idade , Análise de Célula Única/métodos , Cartilagem Articular/lesões , Cartilagem Articular/diagnóstico por imagem , Cartilagem Articular/patologia , Condrócitos/metabolismo , Traumatismos do Tornozelo/diagnóstico por imagem , Adolescente , Análise de Sequência de RNA/métodosRESUMO
An electrochemical sensor was developed for the detection of hydrogen peroxide (H2O2), utilizing the synergistic effects of graphene (Gr) and MOF-on-MOF nanozymes (FeCu-NZs). Initially, Fe-MOF with peroxide-like activity is synthesized using a solvothermal method. Subsequently, the organic ligand on its surface binds Cu2+, enhancing the enzyme-like activity further. The resulting FeCu-NZs exhibit a distinctive electrochemical signal in response to H2O2. Moreover, integrating FeCu-NZs with Gr significantly amplifies the electrochemical signal and effectively reduces the sensor's detection limit. The developed sensor exhibited linear ranges of 0.1-3800 µM, with a limit of detection (LOD) of 0.06 µM. Additionally, FeCu-NZs catalyze H2O2 to generate abundant â¢OH radicals, and colorimetric detection of H2O2 is facilitated using the color rendering principle of 3,3',5,5'-tetramethylbenzidine (TMB). Notably, this detection method was applied to determine H2O2 concentrations in real samples, achieving a recovery exceeding 95.7%. In summary, this research provides a practical platform for the construction of traditional nanozymes and the integration of electrochemical systems, which have broad applications in food analysis, environmental monitoring, and medical diagnosis.
RESUMO
Reducing interface nonradiative recombination is important for realizing highly efficient perovskite solar cells. In this work, we develop a synergistic bimolecular interlayer (SBI) strategy via 4-methoxyphenylphosphonic acid (MPA) and 2-phenylethylammonium iodide (PEAI) to functionalize the perovskite interface. MPA induces an in-situ chemical reaction at the perovskite surface via forming strong P-O-Pb covalent bonds that diminish the surface defect density and upshift the surface Fermi level. PEAI further creates an additional negative surface dipole so that a more n-type perovskite surface is constructed, which enhances electron extraction at the top interface. With this cooperative surface treatment, we greatly minimize interface nonradiative recombination through both enhanced defect passivation and improved energetics. The resulting p-i-n device achieves a stabilized power conversion efficiency of 25.53% and one of the smallest nonradiative recombination induced Voc loss of only 59 mV reported to date. We also obtain a certified efficiency of 25.05%. This work sheds light on the synergistic interface engineering for further improvement of perovskite solar cells.
RESUMO
This study successfully designed and synthesized two nonfused ring electron acceptors, 412-6F and 412-6Cl, modified with fluorine and chlorine substituents, respectively. Single-crystal analysis revealed that 412-6F possesses a planar molecular backbone and exhibits pronounced dipole-dipole interactions between the fluorine atoms on the lateral phenyl groups and the carbonyl oxygen atoms on the end groups. This specific interaction promotes dense end-group stacking, leading to a reduced interlayer spacing. Improved crystallinity and coherence length are observed in the D18:412-6F blend film. Conversely, 412-6Cl adopts a more distorted configuration and lacks these interactions. As a result, the organic solar cell (OSC) based on D18:412-6F achieved a remarkable power conversion efficiency of 18.03%, surpassing the performance of the D18:412-6Cl OSC. This underscores the importance of designing novel acceptors with beneficial intermolecular interactions to enhance OSC efficiency, thus providing a new direction for organic photovoltaic advancement.
RESUMO
BACKGROUND: Exosomes play a crucial role in promoting tumor progression, dissemination, and resistance to treatment. These extracellular vesicles hold promise as valuable indicators for cancer detection. Our investigation focuses on exploring the significance and clinical relevance of exosomal miRNAs in small cell lung cancer (SCLC). METHODS: Serum exosomes were isolated from both SCLC patients and healthy controls, and subjected to exosomal miRNA sequencing analysis. Mimics and inhibitors were employed to investigate the function of exosomal miR-1128-5p in cell migration and proliferation, both in vitro and in vivo. Western blot and luciferase assay were utilized to identify the interaction between miR-1228-5p and dual specificity phosphatase 22 (DUSP22). RESULTS: Exosomal miRNA sequencing analysis revealed enrichment of specific miRNAs in SCLC compared to healthy controls. Circulating miR-1228-5p was upregulated in SCLC patients, associated with advanced stages, suggesting its potential oncogenic role. In vitro, miR-1228-5p expression was significantly higher in SCLC cells than in normal cells. SCLC cell-derived exosomes contained elevated levels of miR-1228-5p, facilitating its entry into co-cultured cells. Notably, migration and proliferation induced by SCLC exosomes were mainly mediated by miR-1228-5p. In vivo experiments confirmed these findings. Western blot analysis demonstrated miR-1228-5p's regulation of DUSP22 expression, and luciferase reporter assay validated DUSP22 as a direct target gene. Overexpressing DUSP22 counteracted miR-1228-5p's promotion of SCLC cell proliferation and migration. CONCLUSIONS: Collectively, our results suggest that exosomes play a role in facilitating cancer growth and metastasis by delivering miR-1228-5p. Moreover, circulating exosomal miR-1228-5p may serve as a potential marker for SCLC diagnosis and prognosis.
Assuntos
Movimento Celular , Proliferação de Células , Regulação para Baixo , Fosfatases de Especificidade Dupla , Exossomos , Regulação Neoplásica da Expressão Gênica , Neoplasias Pulmonares , MicroRNAs , Fosfatases da Proteína Quinase Ativada por Mitógeno , Carcinoma de Pequenas Células do Pulmão , Humanos , MicroRNAs/genética , Exossomos/metabolismo , Exossomos/genética , Proliferação de Células/genética , Movimento Celular/genética , Neoplasias Pulmonares/patologia , Neoplasias Pulmonares/genética , Neoplasias Pulmonares/metabolismo , Carcinoma de Pequenas Células do Pulmão/patologia , Carcinoma de Pequenas Células do Pulmão/genética , Carcinoma de Pequenas Células do Pulmão/metabolismo , Masculino , Feminino , Fosfatases de Especificidade Dupla/genética , Fosfatases de Especificidade Dupla/metabolismo , Animais , Camundongos , Fosfatases da Proteína Quinase Ativada por Mitógeno/genética , Fosfatases da Proteína Quinase Ativada por Mitógeno/metabolismo , Pessoa de Meia-Idade , Linhagem Celular Tumoral , Camundongos Nus , Camundongos Endogâmicos BALB C , IdosoRESUMO
Designing and synthesizing narrow band gap acceptors that exhibit high photoluminescence quantum yield (PLQY) and strong crystallinity is a highly effective, yet challenging, approach to reducing non-radiative energy losses (âµEnr) and boosting the performance of organic solar cells (OSCs). We have successfully designed and synthesized an A-D-A type fused-ring electron acceptor, named DM-F, which features a planar molecular backbone adorned with bulky three-dimensional camphane side groups at its central core. These bulky substituents effectively hinder the formation of H-aggregates of the acceptors, promoting the formation of more J-aggregates and notably elevating the PLQY of the acceptor in the film. As anticipated, DM-F showcases pronounced near-infrared absorption coupled with impressive crystallinity. Organic solar cells (OSCs) leveraging DM-F exhibit a high EQEEL value and remarkably low âµEnr of 0.14â eV-currently the most minimal reported value for OSCs. Moreover, the power conversion efficiency (PCE) of binary and ternary OSCs utilizing DM-F has reached 16.16 % and 20.09 %, respectively, marking a new apex in reported efficiency within the OSCs field. In conclusion, our study reveals that designing narrow band gap acceptors with high PLQY is an effective way to reduce âµEnr and improve the PCE of OSCs.
RESUMO
The exploration of two-dimensional (2D) wide-band-gap semiconductors (WBGSs) holds significant scientific and technological importance in the field of condensed matter physics and is actively being pursued in optoelectronic research. In this study, we present the discovery of a novel WBGS, namely monolayer BiSnO3, using first-principles calculations in conjunction with the quasi-particle G0W0approximation. Our calculations confirm that monolayer BiSnO3exhibits moderate cleavage energy, positive phonon modes, mechanical resilience, and high temperature resistance (up to 1000 K), which demonstrate its structural stability, flexibility, and potential for experimental realization. Furthermore, band-structure calculations reveal that monolayer BiSnO3is a typical WBGS material with a band-gap energy (Eg) of 3.61 eV and possesses a unique quasi-direct electronic feature due to its quasi-flat valence band. The highest occupied valence flat-band originates from the electronic hybridization between Bi-6pand O-2pstates, which are in close proximity to the Fermi level. Remarkably, monolayer BiSnO3exhibits a high absorption capacity for ultraviolet light spanning the UVA to UVC regions, displaying optical isotropy absorption and an unusual excitonic effect. These intriguing structural and electronic properties establish monolayer BiSnO3as a promising candidate for the development of new multi-function-integrated electronic and optoelectronic devices in the emerging field of 2D WBGSs.
RESUMO
To reveal the impact of cadmium stress on the physiological mechanism of lettuce, simultaneous determination and correlation analyses of chlorophyll content and photosynthetic function were conducted using lettuce seedlings as the research subject. The changes in relative chlorophyll content, rapid chlorophyll fluorescence induction kinetics curve, and related chlorophyll fluorescence parameters of lettuce seedling leaves under cadmium stress were detected and analyzed. Furthermore, a model for estimating relative chlorophyll content was established. The results showed that cadmium stress at 1 mg/kg and 5 mg/kg had a promoting effect on the relative chlorophyll content, while cadmium stress at 10 mg/kg and 20 mg/kg had an inhibitory effect on the relative chlorophyll content. Moreover, with the extension of time, the inhibitory effect became more pronounced. Cadmium stress affects both the donor and acceptor sides of photosystem II in lettuce seedling leaves, damaging the electron transfer chain and reducing energy transfer in the photosynthetic system. It also inhibits water photolysis and decreases electron transfer efficiency, leading to a decline in photosynthesis. However, lettuce seedling leaves can mitigate photosystem II damage caused by cadmium stress through increased thermal dissipation. The model established based on the energy captured by a reaction center for electron transfer can effectively estimate the relative chlorophyll content of leaves. This study demonstrates that chlorophyll fluorescence techniques have great potential in elucidating the physiological mechanism of cadmium stress in lettuce, as well as in achieving synchronized determination and correlation analyses of chlorophyll content and photosynthetic function.
Assuntos
Cádmio , Lactuca , Complexo de Proteína do Fotossistema II/metabolismo , Fluorescência , Fotossíntese , Clorofila , Plântula , Folhas de Planta/metabolismoRESUMO
Enhancing the device electroluminescence quantum efficiency (EQEEL) is a critical factor in mitigating non-radiative voltage losses (VNR) and further improving the performance of organic solar cells (OSCs). While the common understanding attributes EQEEL in OSCs to the dynamics of charge transfer (CT) states, persistent efforts to manipulate these decay dynamics have yielded limited results, with the EQEEL of high-efficiency OSCs typically remaining below 10-2%. This value is considerably lower than that observed in high efficiency inorganic photovoltaic devices. Here, we report that EQEEL is also influenced by the dissociation rate constant of singlet states (kDS). Importantly, in contrast to the traditional belief that advocates maximizing kDS for superior photovoltaic quantum efficiency (EQEPV), a controlled reduction in kDS is shown to enhance EQEEL without compromising EQEPV. Consequently, a promising experimental approach to address the VNR challenge is proposed, resulting in a significant improvement in the performance of OSCs.
RESUMO
BACKGROUND: The COVID-19 pandemic is an unprecedented health crisis that has affected in vitro fertilization practices globally. Previous studies have shown that SARS-CoV-2 impacts the quality of embryos by inducing an immunological response in infertile patients. In this study, the early embryonic development of SARS-CoV-2-infected infertile patients was investigated. METHODS: Sixty-five SARS-CoV-2 infected infertile patients and 258 controls were involved in this study. The major outcome parameters for the cycle were analyzed, including the number of oocytes, maturation oocytes, available embryos per cycle, and embryo morpho kinetic characteristics. RESULTS: From SARS-CoV-2 infection until oocyte retrieval, it took an average of 6.63 days. The results revealed that the number of oocytes and high-quality embryos on day 3 dramatically reduced in SARS-CoV-2-infected infertile patients. SARS-CoV-2 was detected in the follicular fluid of three infertile patients. SARS-CoV-2 infection had negatively impacted the number of oocytes in multivariate linear regression models. The early embryonic development in the SARS-CoV-2 infection group had a noticeable delay from the six-cell stage to blastocyst stage. CONCLUSIONS: SARS-CoV-2 infection reduced the number of oocytes and high-quality embryos on day 3. It delays the early embryonic development from the six-cell stage to blastocyst stage and has a negative impact on the quality of embryos.
Assuntos
COVID-19 , Infertilidade , Feminino , Gravidez , Humanos , SARS-CoV-2 , Pandemias , Oócitos , Desenvolvimento EmbrionárioRESUMO
INTRODUCTION: Iruplinalkib (WX-0593) is a new-generation, potent ALK tyrosine kinase inhibitor (TKI) that has been found to have systemic and central nervous system (CNS) efficacy in ALK-positive NSCLC. We compared the efficacy and safety of iruplinalkib with crizotinib in patients with ALK TKI-naive, locally advanced or metastatic ALK-positive NSCLC. METHODS: In this open-label, randomized, multicenter, phase 3 study, patients with ALK-positive NSCLC were randomly assigned to receive iruplinalkib 180 mg once daily (7-d run-in at 60 mg once daily) or crizotinib 250 mg twice daily. The primary end point was progression-free survival (PFS) assessed by Independent Review Committee (IRC) per Response Evaluation Criteria in Solid Tumors version 1.1. Secondary end points included PFS by investigator, objective response rate (ORR), time to response, duration of response, intracranial ORR and time to CNS progression by IRC and investigator, overall survival, and safety. An interim analysis was planned after approximately 70% (134 events) of all 192 expected PFS events assessed by IRC were observed. Efficacy was analyzed in the intention-to-treat population. Safety was assessed in the safety population, which included all randomized patients who received at least one dose of the study drugs. This study is registered with Center for Drug Evaluation of China National Medical Products Administration (CTR20191231) and Clinicaltrials.gov (NCT04632758). RESULTS: From September 4, 2019, to December 2, 2020, a total of 292 patients were randomized and treated; 143 with iruplinalkib and 149 with crizotinib. At this interim analysis (145 events), the median follow-up time was 26.7 months (range: 3.7-37.7) in the iruplinalkib group and 25.9 months (range: 0.5-35.9) in the crizotinib group. The PFS assessed by IRC was significantly longer among patients in the iruplinalkib group (median PFS, 27.7 mo [95% confidence interval (CI): 26.3-not estimable] versus 14.6 mo [95% CI: 11.1-16.5] in the crizotinib group; hazard ratio, 0.34 [98.02% CI: 0.23-0.52], p < 0.0001). The ORR assessed by IRC was 93.0% (95% CI: 87.5-96.6) in the iruplinalkib group and 89.3% (95% CI: 83.1-93.7) in the crizotinib group. The intracranial ORR was 90.9% (10 of 11, 95% CI: 58.7-99.8) in the iruplinalkib group and 60.0% (nine of 15, 95% CI: 32.3-83.7) in the crizotinib group for patients with measurable baseline CNS metastases. Incidence of grade 3 or 4 treatment-related adverse events was 51.7% in the iruplinalkib group and 49.7% in the crizotinib group. CONCLUSIONS: Iruplinalkib was found to have significantly improved PFS and improved intracranial antitumor activity versus crizotinib. Iruplinalkib may be a new treatment option for patients with advanced ALK-positive and ALK TKI-naive NSCLC. FUNDING: This study was funded by Qilu Pharmaceutical Co., Ltd., Jinan, People's Republic of China, and partly supported by the National Science and Technology Major Project for Key New Drug Development (2017ZX09304015).
Assuntos
Carcinoma Pulmonar de Células não Pequenas , Crizotinibe , Neoplasias Pulmonares , Humanos , Masculino , Feminino , Carcinoma Pulmonar de Células não Pequenas/tratamento farmacológico , Carcinoma Pulmonar de Células não Pequenas/patologia , Carcinoma Pulmonar de Células não Pequenas/genética , Neoplasias Pulmonares/tratamento farmacológico , Neoplasias Pulmonares/patologia , Neoplasias Pulmonares/genética , Pessoa de Meia-Idade , Crizotinibe/uso terapêutico , Crizotinibe/farmacologia , Adulto , Idoso , Inibidores de Proteínas Quinases/uso terapêutico , Inibidores de Proteínas Quinases/farmacologia , Quinase do Linfoma Anaplásico/genética , Quinase do Linfoma Anaplásico/antagonistas & inibidoresRESUMO
Constructing 3D/2D perovskite heterojunction is a promising approach to integrate the benefits of high efficiency and superior stability in perovskite solar cells (PSCs). However, in contrast to n-i-p architectural PSCs, the p-i-n PSCs with 3D/2D heterojunction have serious limitations in achieving high-performance as they suffer from a large energetic mismatch and electron extraction energy barrier from a 3D perovskite layer to a 2D perovskite layer, and serious nonradiative recombination at the heterojunction. Here a strategy of incorporating a thin passivating dipole layer (PDL) onto 3D perovskite and then depositing 2D perovskite without dissolving the underlying layer to form an efficient 3D/PDL/2D heterojunction is developed. It is revealed that PDL regulates the energy level alignment with the appearance of interfacial dipole and strongly interacts with 3D perovskite through covalent bonds, which eliminate the energetic mismatch, reduce the surface defects, suppress the nonradiative recombination, and thus accelerate the charge extraction at such electron-selective contact. As a result, it is reported that the 3D/PDL/2D junction p-i-n PSCs present a power conversion efficiency of 24.85% with robust stability, which is comparable to the state-of-the-art efficiency of the 3D/2D junction n-i-p devices.
RESUMO
Emergent fermions arising from the excess electrons of electrides provide a new perspective for exploring semimetal states with unique Fermi surface geometries. In this study, a class of unique two-dimensional (2D) highly anisotropic Dirac fermions is designed using a sandwich structure. Based on the structural design and first-principles calculations, 2D electride MB (M = Ca/Sr, B = Cl/Br/I) is an ideal candidate material. The excess electrons of the bilayer MB could be stably localized in the interstitial cavities, constructing a natural zigzag honeycomb electron sublattice that further forms a Dirac fermion. Compared with traditional Dirac semimetals, 2D Dirac electrides exhibited rich physical properties: i) The Fermi surface shows trigonal warping in low-energy regions. In particular, the geometry of the Fermi surface determines the high anisotropy of the Fermi velocity. ii) A pair of Dirac fermions are protected by three-fold rotational symmetry and exhibit strong robustness. iii) Electride MB possesses a lower work function that strongly correlates with the surface area of the emission channel. Based on these properties, an electron-emitting device with multifunctional applications is fabricated. Therefore, this study provides an ideal platform for studying potential entanglement between structures, electrides, and topological states.
RESUMO
In order to rapidly and accurately monitor cadmium contamination in lettuce and understand the growth conditions of lettuce under cadmium pollution, lettuce is used as the test material. Under different concentrations of cadmium stress and at different growth stages, relative chlorophyll content of lettuce leaves, the cadmium content in the leaves, and the visible-near infrared reflectance spectra are detected and analyzed. An inversion model of the cadmium content and relative chlorophyll content in the lettuce leaves is established. The results indicate that cadmium concentrations of 1 mg/kg and 5 mg/kg promote relative chlorophyll content, while concentrations of 10 mg/kg and 20 mg/kg inhibit relative chlorophyll content. The cadmium content in the leaves increases with increasing cadmium concentrations. Cadmium stress caused a "blue shift" in the red edge position only during the mature period, while the red valley position underwent a "blue shift" during the seedling and growth periods and a "red shift" during the mature period. The green peak position exhibited a "blue shift". After model validation, it was found that the model constructed using the ratio of red edge area to yellow edge area and the normalized values of red edge area and yellow edge area effectively estimated the cadmium content in lettuce leaves. The model established using the normalized vegetation index of the red edge and the ratio of the peak green value to red shoulder amplitude can effectively estimate the relative chlorophyll content in lettuce leaves. This study demonstrates that the visible-near infrared spectroscopy technique holds great potential for monitoring cadmium contamination and estimating chlorophyll content in lettuce.
Assuntos
Cádmio , Espectroscopia de Luz Próxima ao Infravermelho , Espectroscopia de Luz Próxima ao Infravermelho/métodos , Cádmio/análise , Clorofila/análise , Luz , Folhas de Planta/químicaRESUMO
Reports on using complementary colours for high-contrast ratiometric assays are limited to date. In this work, graphitized carbon nitride (g-C3N4) nanosheets and mercaptoethylamine (MEA) capped Mn-doped ZnS QDs were fabricated by liquid exfoliation of bulk g-C3N4, and by a coprecipitation and postmodification strategies, respectively. Mn-doped ZnS quantum dots were deposited onto g-C3N4 nanosheets through an electrostatic self-assembly to form new nanocomposites (denoted as Mn-ZnS QDs@g-C3N4). Mn-ZnS QDs@g-C3N4 can emit a pair of complementary colour light, namely, orange room-temperature phosphorescence (RTP) at 582 nm and blue fluorescence at 450 nm. After 2,4,6-trinitrotoluene (TNT) dosing into Mn-ZnS QDs@g-C3N4 aqueous solution, and pairing with MEA to generate TNT anions capable of quenching the emission of Mn-doped ZnS QDs, the fluorescence colours of the solution changed from orange to blue across white, exhibiting unusual high-contrast fluorescence images. The developed ratiometric chemosensor showed very good linearity in the range of 0-12 µM TNT with a limit of detection of 0.56 µM and an RSD of 6.4 % (n = 5). Also, the ratiometric probe had an excellent selectivity for TNT over other nitroaromatic compounds, which was applied in the ratiometric test paper to image TNT in water, and TNT sensing under phosphorescence mode to efficiently avoid background interference. A high-contrast dual-emission platform for selective ratiometric detection of TNT was therefore established.
RESUMO
In this work, inspired by the principles of a pressure cooker, we utilized a high-pressure method to address the processing challenges associated with high molecular weight polymers. Through this approach, we successfully dissolved high molecular weight D18 in chloroform at 100 °C within a pressure-tight vial. The increased steam pressure raised the boiling point and dissolving capacity of chloroform, enabling the creation of a hybrid film with superior properties, including more ordered molecular arrangement, increased crystallinity, extended exciton diffusion length, and improved phase morphology. Organic solar cells (OSCs) based on D18 : L8-BO prepared using this high-pressure method achieved an outstanding power conversion efficiency of 19.65 %, setting a new record for binary devices to date. Furthermore, this high-pressure method was successfully applied to fabricate OSCs based on other common systems, leading to significant enhancements in device performance. In summary, this research introduces a universal method for processing high molecular weight D18 materials, ultimately resulting in the highest performance reported for binary organic solar cells.
RESUMO
Background The radiotracer fluorine 18 (18F)-labeled fibroblast activation protein inhibitor (FAPI) has shown promise for visualizing several types of cancer, but the accuracy of 18F-FAPI compared with 18F-fluorodeoxyglucose (FDG) for the detection of lung cancer remains uncertain. Purpose To evaluate the effectiveness of 18F-FAPI-based PET/CT imaging for the diagnosis of primary and metastatic lung cancer lesions as compared with 18F-FDG PET/CT. Materials and Methods In this secondary analysis of a prospective trial, consecutively recruited patients from a single center with pathologically confirmed lung cancer were prospectively enrolled from December 2020 to April 2022 and underwent paired 18F-FAPI and 18F-FDG PET/CT examinations at intervals of more than 20 hours and within 7 days of each other. Histopathologic and clinical follow-up results were used as reference standards for final diagnoses. 18F-FAPI and 18F-FDG uptake were compared using the McNemar test or paired Student t test. Diagnostic accuracy was compared between the two techniques by using the McNemar χ2 test. Results Sixty-eight participants (median age, 63 years [IQR, 58-68 years; range, 42-79 years]; 46 male [68%]) were evaluated. Compared with the mean tumor-to-background ratio (TBR) for FDG uptake, TBR for FAPI uptake was lower in primary lung tumors (25.3 ± 14.0 [SD] vs 32.1 ± 21.1; P < .001) but higher in metastatic lymph nodes (7.5 ± 6.6 vs 5.9 ± 8.6; P < .001) and bone metastases (8.6 ± 5.4 vs 4.3 ± 2.3; P < .001). For diagnostic accuracy in a total of 548 lesions in 68 participants, compared with 18F-FDG PET/CT, 18F-FAPI PET/CT demonstrated a higher sensitivity (99% [392 of 397 lesions] vs 87% [346 of 397]; P < .001), specificity (93% [141 of 151 lesions] vs 79% [120 of 151]; P = .004), accuracy (97% [533 of 548 lesions] vs 85% [466 of 548]; P < .001), and negative predictive value (97% [141 of 146 lesions] vs 70% [120 of 171 lesions]; P < .001), but there was no evidence of a difference for positive predictive value (98% [392 of 402 lesions] vs 92% [346 of 377 lesions]; P = .57). Conclusion 18F-FAPI PET/CT may be superior to 18F-FDG PET/CT for detecting lung cancer. © RSNA, 2023 Supplemental material is available for this article. See also the editorial by Zukotynski and Gerbaudo in this issue.
Assuntos
Neoplasias Pulmonares , Quinolinas , Humanos , Masculino , Pessoa de Meia-Idade , Fluordesoxiglucose F18 , Radioisótopos de Gálio , Neoplasias Pulmonares/diagnóstico por imagem , Tomografia por Emissão de Pósitrons combinada à Tomografia Computadorizada , Tomografia por Emissão de Pósitrons , Estudos ProspectivosRESUMO
Distributed photovoltaics in living environment harvest the sunlight in different incident angles throughout the day. The development of planer solar cells with large light-receiving angle can reduce the requirements in installation form factor and is therefore urgently required. Here, thin film organic photovoltaics with nano-sized phase separation integrated in micro-sized surface topology is demonstrated as an ideal solution to proposed applications. All-polymer solar cells, by means of a newly developed sequential processing, show large magnitude hierarchical morphology with facilitated exciton-to-carrier conversion. The nano fibrilar donor-acceptor network and micron-scale optical field trapping structure in combination contributes to an efficiency of 19.06% (certified 18.59%), which is the highest value to date for all-polymer solar cells. Furthermore, the micron-sized surface topology also contributes to a large light-receiving angle. A 30% improvement of power gain is achieved for the hierarchical morphology comparing to the flat-morphology devices. These inspiring results show that all-polymer solar cell with hierarchical features are particularly suitable for the commercial applications of distributed photovoltaics due to its low installation requirement.
RESUMO
Two-dimensional (2D) ferromagnetic semiconductors are highly promising candidates for spintronics, but are rarely reported with direct band gaps, high Curie temperatures (Tc), and large magnetic anisotropy. Using first-principles calculations, we predict that two ferromagnetic monolayers, BiXO3 (X = Ru, Os), are such materials with a direct band gap of 2.64 and 1.69 eV, respectively. Monte Carlo simulations reveal that the monolayers show high Tc beyond 400 K. Interestingly, both BiXO3 monolayers exhibit out-of-plane magnetic anisotropy, with magnetic anisotropy energy (MAE) of 1.07 meV per Ru for BiRuO3 and 5.79 meV per Os for BiOsO3. The estimated MAE for the BiOsO3 sheet is one order of magnitude larger than that for the CrI3 monolayer (685 µeV per Cr). Based on the second-order perturbation theory, it is revealed that the large MAE of the monolayers BiRuO3 and BiOsO3 is mainly contributed by the matrix element differences between dxy and dx2-y2 and dyz and dz2 orbitals. Importantly, the ferromagnetism remains robust in 2D BiXO3 under compressive strain, while undergoing a ferromagnetic to antiferromagnetic transition under tensile strain. The intriguing electronic and magnetic properties make BiXO3 monolayers promising candidates for nanoscale electronics and spintronics.
RESUMO
OBJECTIVE: This study investigated the distribution and characteristics of various bone and joint lesions on 18F-FAPI PET/CT in lung cancer patients. METHODS: Seventy-four lung cancer patients who underwent 18F-FAPI PET/CT were reviewed. Bone and joint lesions with elevated 18F-FAPI uptake were recorded and analyzed. The distribution and maximum uptake value (SUVmax) of different benign lesions or bone metastases were presented. In addition, the SUVmax of bone metastases on 18F-FDG and 18F-FAPI-04 PET/CT were also compared. RESULTS: In 53 patients, a total of 262 lesions presented 18F-FAPI accumulation. Bone metastases were mainly in vertebrae, pelvis, and ribs, while benign lesions were in vertebral margins, alveolar bone, and shoulder joints. The SUVmax of bone metastases was significantly higher than that of benign lesions ([Formula: see text] vs. [Formula: see text], [Formula: see text]), with NSCLC cases having higher SUVmax values than SCLC cases ([Formula: see text] vs. [Formula: see text], [Formula: see text]). Among benign lesions, arthritis and periodontitis demonstrated higher SUVmax than degenerative lesions (arthritis: [Formula: see text]; periodontitis: [Formula: see text]; degenerative diseases: [Formula: see text]; [Formula: see text] and [Formula: see text], respectively). The SUVmax of bone metastases was comparable between 18F-FDG and 18F-FAPI PET/CT. However, 18F-FAPI PET/CT was found to be superior in identifying cranial metastases compared to 18F-FDG PET/CT (TBRmet/brain: [Formula: see text] vs. [Formula: see text], [Formula: see text]). CONCLUSION: This study demonstrated that 18F-FAPI PET/CT is a valuable imaging modality for detecting bone and joint lesions in lung cancer patients. The SUVmax of malignant lesions was higher than that of benign lesions, but cannot accurately distinguish benign and malignant lesions. The uptake of FAPI differs among lesions with different pathological types.