Establishment of a Magnetically Controlled Scalable Nerve Injury Model.

Animal models of peripheral nerve injury (PNI) serve as the fundamental basis for the investigations of nerve injury, regeneration, and neuropathic pain. The injury properties of such models, including the intensity and duration, significantly influence the subsequent pathological changes, pain development, and therapeutic efficacy. However, precise control over the intensity and duration of nerve injury remains challenging within existing animal models, thereby impeding accurate and comparative assessments of relevant cases. Here, a new model that provides quantitative and off-body controllable injury properties via a magnetically controlled clamp, is presented. The clamp can be implanted onto the rat sciatic nerve and exert varying degrees of compression under the control of an external magnetic field. It is demonstrated that this model can accurately simulate various degrees of pathology of human patients by adjusting the magnetic control and reveal specific pathological changes resulting from intensity heterogeneity that are challenging to detect previously. The controllability and quantifiability of this model may significantly reduce the uncertainty of central response and inter-experimenter variability, facilitating precise investigations into nerve injury, regeneration, and pain mechanisms.

Microbiome and network analysis reveal potential mechanisms underlying Carassius auratus diseases: The interactions between critical environmental and microbial factors.

Despite the rapid development of research on aquatic environment microbiota, limited attention has been paid to exploring the complex interactions between microbial communities and aquatic environments. Particularly, the mechanisms underlying fish diseases based on such dynamic interactions remain unknown. This study aimed to address the gap by conducting microbiome and co-occurrence network analyses on the typical freshwater aquaculture systems. High-throughput 16S rRNA gene sequencing results revealed significant differences in the microbiota between the disease and healthy groups. Notably, disease mortality varied consistently with the gradient of relative abundance of Proteobacteria (intestine, R2 = 0.46, p < 0.05) and Cyanobacteria (gill, R2 = 0.67, p < 0.01), indicating their potential use as diagnostic criteria. Furthermore, the elevated hepatosomatic index, NO3-N, COD and TC (sediment) were directly correlated with diseases (r > 0.54, p < 0.01). Mean concentrations of NO3-N, COD and TC were elevated by 78.87%, 25.63% and 44.2%, respectively, in ponds where diseases occurred. Quantitative analysis (qPCR) revealed that Aeromonas sobria infected hosts through a potential pathway of "sediment (4.4 × 105 copy number/g)-water (1.1 × 103 copy number/mL)-intestine (1.2 × 106 copy number/g)". Similarly, the potential route for Aeromonas veronii was sediment (4.9 × 106 copy number/g) to gill (5.1 × 105 copy number/g). Additionally, the complexity of microbial networks in the intestine, water, and sediment was significantly lower in the disease group, although no similar phenomenon was observed in the gill microbial network. In summary, these findings reveal that elevated concentrations of crucial environmental factors disrupt the linkages within microbiota, fostering the growth of opportunistic bacteria capable of colonizing fish gut or gills. This offers new insights into potential mechanisms by which environmental factors cause disease in fish.

Surface Finish Analysis of Gradient Voltage Electrochemical Polishing of 316L Stainless Steel Parts Forming by Laser Powder Bed Fusion.

Laser powder bed fusion (LPBF) of complex-structure 316L stainless steel (316L ss) parts has a wide application prospects in aerospace, biomedical, and defense industry fields. However, the surface roughness (Ra) of the LPBF sample is unsatisfactory due to the process characteristics of layer-by-layer selective melting and cumulative forming, which limits its applications in the engineering field. Herein, a gradient voltage electrochemical polishing strategy is proposed based on the characteristics of electrochemical polishing technology, which can polish complex structures. The mechanisms of polishing process parameters and polishing strategy on the surface finish of LPBF parts are investigated. The gradient voltage polishing strategy is extended to complex structures, and the Ra of the inner surfaces of square and round tubes are successfully reduced to about 1 µm. The gradient electrochemical polishing process for surface finish post-treatment of LPBF parts can broaden the engineering applications of complex-structure metal parts.

Mitochondrial GPX4 acetylation is involved in cadmium-induced renal cell ferroptosis.

Increasing evidences demonstrate that environmental stressors are important inducers of acute kidney injury (AKI). This study aimed to investigate the impact of exposure to Cd, an environmental stressor, on renal cell ferroptosis. Transcriptomics analyses showed that arachidonic acid (ARA) metabolic pathway was disrupted in Cd-exposed mouse kidneys. Targeted metabolomics showed that renal oxidized ARA metabolites were increased in Cd-exposed mice. Renal 4-HNE, MDA, and ACSL4, were upregulated in Cd-exposed mouse kidneys. Consistent with animal experiments, the in vitro experiments showed that mitochondrial oxidized lipids were elevated in Cd-exposed HK-2 cells. Ultrastructure showed mitochondrial membrane rupture in Cd-exposed mouse kidneys. Mitochondrial cristae were accordingly reduced in Cd-exposed mouse kidneys. Mitochondrial SIRT3, an NAD+-dependent deacetylase that regulates mitochondrial protein stability, was reduced in Cd-exposed mouse kidneys. Subsequently, mitochondrial GPX4 acetylation was elevated and mitochondrial GPX4 protein was reduced in Cd-exposed mouse kidneys. Interestingly, Cd-induced mitochondrial GPX4 acetylation and renal cell ferroptosis were exacerbated in Sirt3-/- mice. Conversely, Cd-induced mitochondrial oxidized lipids were attenuated in nicotinamide mononucleotide (NMN)-pretreated HK-2 cells. Moreover, Cd-evoked mitochondrial GPX4 acetylation and renal cell ferroptosis were alleviated in NMN-pretreated mouse kidneys. These results suggest that mitochondrial GPX4 acetylation, probably caused by SIRT3 downregulation, is involved in Cd-evoked renal cell ferroptosis.

CHOP-mediated Gasdermin E expression promotes pyroptosis, inflammation, and mitochondrial damage in renal ischemia-reperfusion injury.

In clinical practice, renal ischemia-reperfusion injury (IRI) is a common cause of acute kidney injury (AKI), often leading to acute renal failure or end-stage renal disease (ESRD). The current understanding of renal IRI mechanisms remains unclear, and effective therapeutic strategies and clear targets are lacking. Therefore, the need to find explicit and effective ways to reduce renal IRI remains a scientific challenge. The current study explored pyroptosis, a type of inflammation-regulated programmed cell death, and the role of Gasdermins E (GSDME)-mediated pyroptosis, mitochondrial damage, and inflammation in renal IRI. The analysis of human samples showed that the expression levels of GSDME in normal human renal tissues were higher than those of GSDMD. Moreover, our study demonstrated that GSDME played an important role in mediating pyroptosis, inflammation, and mitochondrial damage in renal IRI. Subsequently, GSDME-N accumulated in the mitochondrial membrane, leading to mitochondrial damage and activation of caspase3, which generated a feed-forward loop of self-amplification injury. However, GSDME knockout resulted in the amelioration of renal IRI. Moreover, the current study found that the transcription factor CHOP was activated much earlier in renal IRI. Inhibition of BCL-2 by CHOP leaded to casapse3 activation, resulting in mitochondrial damage and apoptosis; not only that, but CHOP positively regulated GSDME thereby causing pyroptosis. Therefore, this study explored the transcriptional mechanisms of GSDME during IRI development and the important role of CHOP/Caspase3/GSDME mechanistic axis in regulating pyroptosis in renal IRI. This axis might serve as a potential therapeutic target.

Novel-Ink-Based Direct Ink Writing of Ti6Al4V Scaffolds with Sub-300 µm Structural Pores for Superior Cell Proliferation and Differentiation.

Ti6Al4V scaffolds with pore sizes between 300 and 600 µm are deemed suitable for bone tissue engineering. However, a significant proportion of human bone pores are smaller than 300 µm, playing a crucial role in cell proliferation, differentiation, and bone regeneration. Ti6Al4V scaffolds with these small-sized pores are not successfully fabricated, and their cytocompatibility remains unknown. The study presents a novel ink formula specifically tailored for fabricating Ti6Al4V scaffolds featuring precise and unobstructed sub-300 µm structural pores, achieved by investigating the rheological properties and printability of five inks containing 60-77.5 vol% Ti6Al4V powders and bisolvent binders. Ti6Al4V scaffolds with 50-600 µm pores are fabricated via direct ink writing and subjected to in vitro assays with MC3T3-E1 and bone marrow mesenchymal stem cells. The 100 µm pore-sized scaffolds exhibit the highest cell adhesion and proliferation capacity based on live/dead assay, FITC-phalloidin/4',6-diamidino-2-phenylindole staining, and cell count kit 8 assay. The alizarin red staining, real-time quantitative PCR assay, and immunocytochemical staining demonstrate the superior osteogenic differentiation potential of 100 and 200 µm pore-sized scaffolds. The importance of sub-300 µm structrual pores is highlighted, redefining the optimal pore size for Ti6Al4V scaffolds and advancing bone tissue engineering and clinical medicine development.

Histone deacetylase 6 suppression of renal tubular epithelial cell promotes interstitial mineral deposition via alpha-tubulin acetylation.

Randall's plaque (RP) is derived from interstitial mineral deposition and is highly prevalent in renal calcium oxalate (CaOx) stone disease, which is predictive of recurrence. This study shows that histone deacetylase 6 (HDAC6) levels are suppressed in renal tubular epithelial cells in RP samples, in kidney tissues of hyperoxaluria rats, and in hyper-oxalate-treated or mineralized cultured renal tubular epithelial (MDCK) cells in vitro. Mineral deposition in MDCK cells was exacerbated by HDAC6 inhibition but alleviated by HDAC6 overexpression. Surprisingly, the expression of some osteogenic-associated proteins, were not increased along with the increasing of mineral deposition, and result of single-cell RNA sequencing of renal papillae samples revealed that epithelial cells possess lower calcific activity, suggesting that osteogenic-transdifferentiation may not have actually occurred in tubular epithelial cells despite mineral deposition. The initial mineral depositions facilitated by HDAC6 inhibitor were localized in extracellular dome rather than inside the cells, moreover, suppression of HDAC6 significantly increased the calcium content of co-cultured renal interstitial fibroblasts (NRK49F) and enhanced mineral deposition of indirectly co-cultured NRK49F cells, suggesting that HDAC6 may influence trans-MDCK monolayer secretion of mineral. Further experiments revealed that this regulatory role was partially alpha-tubulinLys40 acetylation dependent. Collectively, these results suggest that hyper-oxalate exposure led to HDAC6 suppression in renal tubular epithelial cells, which may contribute to interstitial mineral deposition by promoting alpha-tubulinLys40 acetylation. Therapeutic agents that influence HDAC6 activity may be beneficial in preventing RP and CaOx stone formation.

Efficacy and Postoperative Complication Rates of Different Surgical Approaches for Calcaneal Fractures: A Network Meta-analysis.

Context: Calcaneal fractures (CFs) are the most common kind of tarsal fracture. The choice of surgical approach is a key element in the management of CFs, but the best method remains in dispute. Also, no single approach is appropriate for all kinds of CFs. Objective: The study intended to evaluate the relationship between six surgical approaches for clinical treatment of CFs and prevention of postoperative complications, to provide an evidence-based approach for treatment. Design: The research team performed a meta-analysis using the data from a previously published review and updating that data through a new narrative review. The team performed a systematic search in PubMed, Embase, the Cochrane Library, and the Chinese National Knowledge Internet (CNKI) from inception until January 2022, with no language restrictions. The search used the following keywords for the search: calcaneus, heel bone, surgical wounds, surgical incisions, prospective trials, prospective trials, and randomized controlled trials. Outcome Measures: The research team compared the complication rates, American Orthopedic Foot and Ankle Society (AOFAS) scores, and Bohler's angles for the six surgical approaches, which were: (1) the extensive lateral approach (ELA), (2) the sinus tarsi approach (STA), (3) the horizontal arc approach (HAA), (4) the longitudinal approach (LA), (5) the oblique lateral incision (OLI), and (6) the modified incision (MI)). The team summarized the results using a random effects model. Results: The research team analyzed the data from 19 RCTs with 1521 participants. They all were randomized controlled trials (RCTs). The complication rates were available for 18 studies, which included 1474 participants. The rates were significantly lower: (1) for HAA compared to ELA, [OR=-2.03; 95% CrI: [-3.63, -0.43)]; (2) for LA compared to ELA (OR=-1.83; 95% CrI: [-2.83, -0.84]); and (3) for STA compared to ELA (OR=- 1.22; 95% CrI: [-1.67, -0.78]). Of the 19 studies, 11 RCTs, with 942 participants, used the AOFAS scale. The probabilities for the surface under the cumulative ranking curve (SUCRA) indicated that OLI (0.694 ) >LA (0.596) >HAA (0.51) >STA (0.477) >ELA (0.224). In addition, ELA had the worst SUCRA (0.224). Of the 19 studies, 15 RCTs, with 1376 participants, used the Bohler angle as an outcome measure. The probability of SUCRA for the surgical approaches indicated that LA (0.723) >ELA (0.667) >STA (0.468) >HAA (0.373) >MI (0.27). Conclusions: The meta-analysis provides an evidence-based approach to the clinical treatment of CFs for six surgical approaches. HAA had the best outcomes, and ELA had the worst.

Evolution of CrCx Ceramic Induced by Laser Direct Energy Deposition Multilayered Gradient Ni204-dr60 Coating.

The manufacturing process for many large components of machines leads to a difference in their properties and performances based on changes in location. Functionally graded materials can meet these requirements and address the issue of generation and expansion of interface cracks. Ni204-dr60 gradient coatings were successfully fabricated using laser direct energy deposition (LDED). Microstructure mechanism evolution and microhardness of the gradient coating were comprehensively investigated. The change in the precipitated phase at the grain boundary and the intergranular zones resulted in a change in microstructural characteristics and also affected the microhardness distribution. The reinforced phase of the Ni204 → dr60 gradient zone from Ni204 to dr60 gradually precipitated and was rich in Mo and Nb phase, lath-shaped CrCx phase, network-shaped CrCx phase, block shape (Ni, Si) (C, B) phase, block CrCx phase, and block Cr (B, C) phase. The gradient coating thus acts as a potential candidate to effectively solve the problem of crack generation at the interface of dr60 and the substrate.

Exploring New Mechanism of Depression from the Effects of Virus on Nerve Cells.

Depression is a common neuropsychiatric disorder with long-term recurrent depressed mood, pain and despair, pessimism and anxiety, and even suicidal tendencies as the main symptoms. Depression usually induces or aggravates the development of other related diseases, such as sleep disorders and endocrine disorders. In today's society, the incidence of depression is increasing worldwide, and its pathogenesis is complex and generally believed to be related to genetic, psychological, environmental, and biological factors. Current studies have shown the key role of glial cells in the development of depression, and it is noteworthy that some recent evidence suggests that the development of depression may be closely related to viral infections, such as SARS-CoV-2, BoDV-1, ZIKV, HIV, and HHV6, which infect the organism and cause some degree of glial cells, such as astrocytes, oligodendrocytes, and microglia. This can affect the transmission of related proteins, neurotransmitters, and cytokines, which in turn leads to neuroinflammation and depression. Based on the close relationship between viruses and depression, this paper provides an in-depth analysis of the new mechanism of virus-induced depression, which is expected to provide a new perspective on the mechanism of depression and a new idea for the diagnosis of depression in the future.

Coaxial 3D Printing of Zeolite-Based Core-Shell Monolithic Cu-SSZ-13@SiO2 Catalysts for Diesel Exhaust Treatment.

Core-shell catalysts with functional shells can increase the activity and stability of the catalysts in selective catalytic reduction of NOx with ammoniax . However, the conventional approaches based on multistep fabrication for core-shell structures encounter persistent restrictions regarding strict synthesis conditions and limited design flexibility. Herein, a facile coaxial 3D printing strategy is for the first time developed to construct zeolite-based core-shell monolithic catalysts with interconnected honeycomb structures, in which the hydrophilic noncompact silica serves as shell and Cu-SSZ-13 zeolite acts as core. Compared to a Cu-SSZ-13 monolith which suffers from the interfacial diffusion, the SiO2 shell layer can increase the accessibility of active sites over Cu-SSZ-13@SiO2 , resulting in a 10-20% higher NO conversion at200-550 °C under 300 000 cm3 g-1 h-1 . Meanwhile, a thicker SiO2 shell enhances the hydrothermal stability of the aged catalyst by inhibiting the dealumination and the formation of CuOx . Other representative monolithic catalysts with different topological zeolites as shell and diverse metal oxides as the core can be also realized by this coaxial 3D printing. This strategy allows multiple porous materials to be directly integrated, which allows for flexible design and fabrication of various core-shell monolithic catalysts with customized functionalities.

Mechanisms of circRNA/lncRNA-miRNA interactions and applications in disease and drug research.

In recent years, breakthroughs in bioinformatics have been made with the discovery of many functionally significant non-coding RNAs (ncRNAs). The discovery of these ncRNAs has further demonstrated the multi-level characteristics of intracellular gene expression regulation, which plays an important role in assisting diagnosis, guiding clinical drug use and determining prognosis in the treatment process of various diseases. microRNAs (miRNAs), long non-coding RNAs (lncRNAs), and circular RNAs (circRNAs) are the three major types of ncRNAs that interact with each other. Studies have shown that lncRNAs and circRNAs can sponge miRNAs, thereby influencing normal physiological processes and regulating mRNA expression and, thus, the physiological state of cells. This paper summarizes the mechanism of action and research progress of the three ncRNA and seven types of modalities. This summary is intended to provide new ideas for diagnosing and treating diseases and researching and developing new drugs.

LncRNA-MALAT1: A Key Participant in the Occurrence and Development of Cancer.

LncRNAs are a group of non-coding RNA transcripts with lengths of over 200 nucleotides and can interact with DNA, RNA, and proteins to regulate gene expression of malignant tumors in human tissues. LncRNAs participate in vital processes, such as chromosomal nuclear transport in the cancerous site of human tissue, activation, and the regulation of proto-oncogenes, the differentiation of immune cells, and the regulation of the cellular immune system. The lncRNA metastasis-associated lung cancer transcript 1 (MALAT1) is reportedly involved in the occurrence and development of many cancers and serves as a biomarker and therapeutic target. These findings highlight its promising role in cancer treatment. In this article, we comprehensively summarized the structure and functions of lncRNA, notably the discoveries of lncRNA-MALAT1 in different cancers, the action mechanisms, and the ongoing research on new drug development. We believe our review would serve as a basis for further research on the pathological mechanism of lncRNA-MALAT1 in cancer and provide evidence and novel insights into its application in clinical diagnoses and treatments.

Metallic 4D Printing of Laser Stimulation.

4D printing of metallic shape-morphing systems can be applied in many fields, including aerospace, smart manufacturing, naval equipment, and biomedical engineering. The existing forming materials for metallic 4D printing are still very limited except shape memory alloys. Herein, a 4D printing method to endow non-shape-memory metallic materials with active properties is presented, which could overcome the shape-forming limitation of traditional material processing technologies. The thermal stress spatial control of 316L stainless steel forming parts is achieved by programming the processing parameters during a laser powder bed fusion (LPBF) process. The printed parts can realize the shape changing of selected areas during or after forming process owing to stress release generated. It is demonstrated that complex metallic shape-morphing structures can be manufactured by this method. The principles of printing parameters programmed and thermal stress pre-set are also applicable to other thermoforming materials and additive manufacturing processes, which can expand not only the materials used for 4D printing but also the applications of 4D printing technologies.

Designing Intelligent Nanomaterials to Achieve Highly Sensitive Diagnoses and Multimodality Therapy of Bladder Cancer.

Bladder cancer (BC) is among the most common malignant tumors of the genitourinary system worldwide. In recent years, the rate of BC incidence has increased, and the recurrence rate is high, resulting in poor quality of life for patients. Therefore, how to develop an effective method to achieve synchronous precise diagnoses and BC therapies is a difficult problem to solve clinically. Previous reports usually focus on the role of nanomaterials as drug delivery carriers, while a summary of the functional design and application of nanomaterials is lacking. Summarizing the application of functional nanomaterials in high-sensitivity diagnosis and multimodality therapy of BC is urgently needed. This review summarizes the application of nanotechnology in BC diagnosis, including the application of nanotechnology in the sensoring of BC biomarkers and their role in monitoring BC. In addition, conventional and combination therapies strategy in potential BC therapy are analyzed. Moreover, different kinds of nanomaterials in BC multimodal therapy according to pathological features of BC are also outlined. The goal of this review is to present an overview of the application of nanomaterials in the theranostics of BC to provide guidance for the application of functional nanomaterials to precisely diagnose and treat BC.

Mechanistic studies of MALAT1 in respiratory diseases.

Background: The incidence of respiratory diseases and the respiratory disease mortality rate have increased in recent years. Recent studies have shown that long non-coding RNA (lncRNA) MALAT1 is involved in various respiratory diseases. In vascular endothelial and cancer cells, MALAT1 expression triggers various changes such as proinflammatory cytokine expression, cancer cell proliferation and metastasis, and increased endothelial cell permeability. Methods: In this review, we performed a relative concentration index (RCI) analysis of the lncRNA database to assess differences in MALAT1 expression in different cell lines and at different locations in the same cell, and summarize the molecular mechanisms of MALAT1 in the pathophysiology of respiratory diseases and its potential therapeutic application in these conditions. Results: MALAT1 plays an important regulatory role in lncRNA with a wide range of effects in respiratory diseases. The available evidence shows that MALAT1 plays an important role in the regulation of multiple respiratory diseases. Conclusion: MALAT1 is an important regulatory biomarker for respiratory disease. Targeting the regulation MALAT1 could have important applications for the future treatment of respiratory diseases.

Hybrid Additive Manufacturing of Fused Filament Fabrication and Ultrasonic Consolidation.

Fused filament fabrication (FFF) additive manufacturing technology has the advantages of being low cost, having a simple operation, using wide types of molding materials, and producing less pollution during the printing process. However, the mechanical properties of the molded sample are unsatisfactory due to the limited bonding force between the filaments during the forming process, which limits its further development and application in the engineering field. Herein, the hybrid additive manufacturing technology for heterogeneous materials based on the ultrasonic-assisted enhanced fused filament fabrication technology was proposed. The mechanism of ultrasonic vibration on the strengthening of FFF samples was explored. The influence mechanisms of bonding time and ultrasonic strengthening times, ultrasonic strengthening and static load compression on the strengthening of mechanical properties of the sample were investigated. The effects of the thickness and printing angle of the FFF samples on the ultrasonic-enhanced mechanical properties were explored. The tensile strength of the one-time ultrasonic-strengthened sample is up to 43.43 MPa, which is 16.12% higher than that of the original. The maximum bending strength of the four-time ultrasonic-strengthened sample is 73.38 MPa, which is 78.98% higher than that of the original. Ultrasonic strengthening not only re-fused the pores inside the sample, but also improved the bond strength between the rasters. With the increase in the thickness of the sample, the increase rate of ultrasonic to the strength of the sample decreased significantly. The effects of ultrasound on the interlayer adhesion of samples with various printing angles were different. Based on the systematic research on the influence mechanism of ultrasonic process parameters and molding process parameters on the strengthening of FFF, a molding method for additively manufacturing heterogeneous material parts while strengthening the mechanical properties of FFF samples was proposed, and the influence mechanisms of the molding process on the mechanical properties and shape memory properties of the sample were explored, which can broaden the application of FFF technology in the engineering field.

Application and Prospects of Hydrogel Additive Manufacturing.

Hydrogel has become a commonly used material for 3D and 4D printing due to its favorable biocompatibility and low cost. Additive manufacturing, also known as 3D printing, was originally referred to as rapid prototyping manufacturing. Variable-feature rapid prototyping technology, also known as 4D printing, is a combination of materials, mathematics, and additives. This study constitutes a literature review to address hydrogel-based additive manufacturing technologies, introducing the characteristics of commonly used 3D printing hydrogel methods, such as direct ink writing, fused deposition modeling, and stereolithography. With this review, we also investigated the stimulus types, as well as the advantages and disadvantages of various stimulus-responsive hydrogels in smart hydrogels; non-responsive hydrogels; and various applications of additive manufacturing hydrogels, such as neural catheter preparation and drug delivery. The opportunities, challenges, and future prospects of hydrogel additive manufacturing technologies are discussed.

Bio-Inspired 4D Printing of Dynamic Spider Silks.

Spider silks exhibit excellent mechanical properties and have promising application prospects in engineering fields. Because natural spider silk fibers cannot be manufactured on a large scale, researchers have attempted to fabricate bio-inspired spider silks. However, the fabrication of bio-inspired spider silks with dynamically tunable mechanical properties and stimulation-response characteristics remains a challenge. Herein, the 4D printing of shape memory polyurethane is employed to produce dynamic bio-inspired spider silks. The bio-inspired spider silks have two types of energy-absorbing units that can be adjusted, one by means of 4D printing with predefined nodes, and the other through different stimulation methods to make the bio-inspired spider silks contract and undergo spiral deformation. The shape morphing behaviors of bio-inspired spider silks are programmed via pre-stress assemblies enabled by 4D printing. The energy-absorbing units of bio-inspired spider silks can be dynamically adjusted owing to stress release generated with the stimuli of temperature or humidity. Therefore, the mechanical properties of bio-inspired spider silks can be controlled to change dynamically. This can further help in developing applications of bio-inspired spider silks in engineering fields with dynamic changes of environment.

Influence Mechanism of Ultrasonic Vibration Substrate on Strengthening the Mechanical Properties of Fused Deposition Modeling.

Fused deposition modeling is the most widely used 3D-printing technology, with the advantage of being an accessible forming process. However, the poor mechanical properties of the formed parts limit its application in engineering. Herein, a new ultrasonic-assisted fused deposition modeling 3D-printing method was proposed to improve the mechanical properties of the formed parts. The effects of ultrasonic vibration substrate process parameters and printing process parameters on the tensile and bending properties of formed samples were studied. The tensile strength and bending strength of the samples printed with a 12 µm ultrasonic amplitude can be increased by 13.2% and 12.6%, respectively, compared with those printed without ultrasonic vibration. The influence mechanism of ultrasonic vibration on mechanical properties was studied through microscopic characterization and in situ infrared monitoring experiments. During the printing process, increasing the ultrasonic vibration and temperature employed via the ultrasonic substrate can reduce the pore defects inside the sample. The mechanical properties of FDM-formed samples can be controlled by adjusting ultrasonic-assisted process parameters, which can broaden the application of 3D printing.