Positive-Negative Tunable Coefficients of Friction in Superlubric Contacts.

In conventional systems, the coefficient of friction (COF) is typically positive, signifying a direct relationship between frictional and normal forces. Contrary to this, we observe that the load dependence of friction exhibits a unique bell-shaped curve when studying the frictional properties between graphite and α-Al_{2}O_{3} surfaces. As the applied normal force increases, the friction initially rises and then decreases. Finite element simulations reveal this behavior is due to edge detachment at the graphite/α-Al_{2}O_{3} interface as the normal force approaches a critical value. Because friction in superlubric contacts predominantly arises from edges, their detachment leads to a decrease in overall friction. We empirically validate these findings by varying the radii of curvature of the tips and the thicknesses of graphite flakes. This unprecedented observation offers a new paradigm for tuning COF in superlubric applications, enabling transitions from positive to negative values.

Ultrahigh Critical Current Density across Sliding Electrical Contacts in Structural Superlubric State.

In conventional sliding electrical contacts (SECs), large critical current density (CCD) requires a high ratio between actual and apparent contact area, while low friction and wear require the opposites. Structural superlubricity (SSL) has the characteristics of zero wear, near zero friction, and all-atoms in real contact between the contacting surfaces. Here, we show a measured current density up to 17.5 GA/m^{2} between microscale graphite contact surfaces while sliding under ambient conditions. This value is nearly 146 times higher than the maximum CCD of other SECs reported in literatures (0.12 GA/m^{2}). Meanwhile, the coefficient of friction for the graphite contact is less than 0.01 and the sliding interface is wear-free according to the Raman characterization, indicating the presence of the SSL state. Furthermore, we estimate the intrinsic CCD of single crystalline graphite to be 6.69 GA/m^{2} by measuring the scaling relation of CCD. Theoretical analysis reveals that the CCD is limited by thermal effect due to the Joule heat. Our results show the great potential of the SSL contacts to be used as SECs, such as micro- or nanocontact switches, conductive slip rings, or pantographs.

Filtering Robust Graphite without Incommensurate Interfaces by Electrical Technique.

Two-dimensional (2D) van der Waals (vdW) layered materials have attracted considerable attention due to their potential applications in various fields. Among these materials, graphite is widely employed to achieve structural superlubricity (SSL), where the interfacial friction between two solids is almost negligible and the wear is zero. However, the development of integrated SSL systems using graphite flakes still faces a major obstacle stemming from the inherent delamination-induced instability in vdW layered materials. To address this issue, we propose a nondestructive filtering technique that utilizes electrical measurement to identify robust graphite flakes without delamination. Our experimental results confirm that all the filtered graphite flakes exhibit delamination-free behavior after more than 7000 cycles of sliding on a series of 2D and 3D substrates. Besides, we employ three types of characterizing methods to confirm that the filtering process does not impair the graphite flakes. Moreover, with focused ion beam (FIB) assisted slicing characterization and statistical analysis, we have discovered that all of the filtered flakes possess a graphite layer thickness below 100 nm. This is consistent with the thickness of the single crystalline graphite layer of our samples reported in the literature, suggesting the absence of incommensurate interfaces in the filtered graphite flakes. Our work contributes to a deeper understanding of the relationship between graphite conductance and incommensurate interfaces. In addition, we present a possible solution to address the delamination problem in layered materials, and this technique shows the potential to characterize the internal microstructure of grains and the distribution of grain boundaries in vdW materials on a large scale.

Anisotropic Fracture of Graphene Revealed by Surface Steps on Graphite.

The anisotropic fracture toughness G(θ) is an intrinsic feature of graphene and is fundamental for fabrication, functioning, and robustness of graphene-based devices. However, existing results show significant discrepancies on the anisotropic factor, i.e., the ratio between zigzag (ZZ) and armchair (AC) directions, G_{ZZ}/G_{AC}, both qualitatively and quantitatively. Here, we investigate the anisotropic fracture of graphene by atomic steps on cleaved graphite surfaces. Depending on the relation between the peeling direction and local lattice orientation, two categories of steps with different structures and behaviors are observed. In one category are straight steps well aligned with local ZZ directions, while in the other are steps consisting of nanoscale ZZ and AC segments. Combined with an analysis on fracture mechanics, the microscale morphology of steps and statistics of their directions provides a measurement on the anisotropic factor of G_{ZZ}/G_{AC}=0.971, suggesting that the ZZ direction has a slightly lower fracture toughness. The results provide an experimental benchmark for the widely scattered existing results, and offer constraints on future models of graphene fracture.

100 km wear-free sliding achieved by microscale superlubric graphite/DLC heterojunctions under ambient conditions.

Wear-free sliding between two contacted solid surfaces is the ultimate goal in the effort to extend the lifetime of mechanical devices, especially when it comes to inventing new types of micro-electromechanical systems where wear is often a major obstacle. Here we report experimental observations of wear-free sliding for a micrometer-sized graphite flake on a diamond-like-carbon (DLC) surface under ambient conditions with speeds up to 2.5 m/s, and over a distance of 100 km. The coefficient of friction (COF) between the microscale graphite flake, a van der Waals (vdW) layered material and DLC, a non-vdW-layered material, is measured to be of the order of [Formula: see text], which belongs to the superlubric regime. Such ultra-low COFs are also demonstrated for a microscale graphite flake sliding on six other kinds of non-vdW-layered materials with sub-nanometer roughness. With a synergistic analysis approach, we reveal the underlying mechanism to be the combination of interfacial vdW interaction, atomic-smooth interfaces and the low normal stiffness of the graphite flake. These features guarantee a persistent full contact of the interface with weak interaction, which contributes to the ultra-low COFs. Together with the extremely high in-plane strength of graphene, wear-free sliding is achieved. Our results broaden the scope of superlubricity and promote its wider application in the future.

Microscale Schottky superlubric generator with high direct-current density and ultralong life.

Miniaturized or microscale generators that can effectively convert weak and random mechanical energy into electricity have significant potential to provide solutions for the power supply problem of distributed devices. However, owing to the common occurrence of friction and wear, all such generators developed so far have failed to simultaneously achieve sufficiently high current density and sufficiently long lifetime, which are crucial for real-world applications. To address this issue, we invent a microscale Schottky superlubric generator (S-SLG), such that the sliding contact between microsized graphite flakes and n-type silicon is in a structural superlubric state (an ultra-low friction and wearless state). The S-SLG not only generates high current (~210 Am-2) and power (~7 Wm-2) densities, but also achieves a long lifetime of at least 5,000 cycles, while maintaining stable high electrical current density (~119 Am-2). No current decay and wear are observed during the experiment, indicating that the actual persistence of the S-SLG is enduring or virtually unlimited. By excluding the mechanism of friction-induced excitation in the S-SLG, we further demonstrate an electronic drift process during relative sliding using a quasi-static semiconductor finite element simulation. Our work may guide and accelerate the future use of S-SLGs in real-world applications.

Load-induced dynamical transitions at graphene interfaces.

The structural superlubricity (SSL), a state of near-zero friction between two contacted solid surfaces, has been attracting rapidly increasing research interest since it was realized in microscale graphite in 2012. An obvious question concerns the implications of SSL for micro- and nanoscale devices such as actuators. The simplest actuators are based on the application of a normal load; here we show that this leads to remarkable dynamical phenomena in microscale graphite mesas. Under an increasing normal load, we observe mechanical instabilities leading to dynamical states, the first where the loaded mesa suddenly ejects a thin flake and the second characterized by peculiar oscillations, during which a flake repeatedly pops out of the mesa and retracts back. The measured ejection speeds are extraordinarily high (maximum of 294 m/s), and correspond to ultrahigh accelerations (maximum of 1.1×1010 m/s2). These observations are rationalized using a simple model, which takes into account SSL of graphite contacts and sample microstructure and considers a competition between the elastic and interfacial energies that defines the dynamical phase diagram of the system. Analyzing the observed flake ejection and oscillations, we conclude that our system exhibits a high speed in SSL, a low friction coefficient of 3.6×10-6, and a high quality factor of 1.3×107 compared with what has been reported in literature. Our experimental discoveries and theoretical findings suggest a route for development of SSL-based devices such as high-frequency oscillators with ultrahigh quality factors and optomechanical switches, where retractable or oscillating mirrors are required.

A Hybrid Two-Axis Force Sensor for the Mesoscopic Structural Superlubricity Studies.

Structural superlubricity (SSL) is a state of nearly zero friction and zero wear between two directly contacted solid surfaces. Recently, SSL was achieved in mesoscale and thus opened the SSL technology which promises great applications in Micro-electromechanical Systems (MEMS), sensors, storage technologies, etc. However, load issues in current mesoscale SSL studies are still not clear. The great challenge is to simultaneously measure both the ultralow shear forces and the much larger normal forces, although the widely used frictional force microscopes (FFM) and micro tribometers can satisfy the shear forces and normal forces requirements, respectively. Here we propose a hybrid two-axis force sensor that can well fill the blank between the capabilities of FFM and micro tribometers for the mesoscopic SSL studies. The proposed sensor can afford 1mN normal load with 10 nN lateral resolution. Moreover, the probe of the sensor is designed at the edge of the structure for the convenience of real-time optical observation. Calibrations and preliminary experiments are conducted to validate the performance of the design.