Anomalous Catalytic Performance on Non-Active-Site Carbon Substrate.

Carbon-based nanomaterials are gaining attention in electrocatalysis. This study investigates the inherent nitrate reduction activity (NO3RR) of commercial carbon paper as a substrate. Results showed that carbon paper, without additional catalysts, achieved approximately 80.42% NH3 Faradaic efficiency (FE) at -2.1 V vs. Hg/HgO in alkaline conditions, 83.51% NH3 FE at -1.9 V vs. Ag/AgCl in neutral conditions, and 14.53% NH3 FE at -1.9 V vs. MSE in acidic conditions. Density Functional Theory (DFT) calculations revealed energy barriers of 2.66 eV, 0.95 eV, and 1.37 eV, respectively. Molecular physisorption on the carbon paper surface generates an induced electric field, promoting charge transfer between the carbon paper and the adsorbed molecules, thus enhancing the activity of the carbon paper. These findings highlight the importance of considering the intrinsic catalytic properties of carbon substrates in catalyst design and evaluation, as overlooking these properties can lead to inaccurate performance assessments. This study emphasizes the need for a comprehensive approach to optimize catalytic systems.

Mechanistic insights into C-C coupling in electrocatalytic CO2 reduction reaction.

The utilization of CO2 has become an emerging area of research in response to climate change and global warming. The electrochemical CO2 reduction reaction (CO2RR) holds significant promise as a technology to address this issue by converting CO2 molecules into various commercially valuable chemicals. While CO2RR to C1 hydrocarbons has achieved high activity and selectivity, the C-C coupling to produce higher hydrocarbons remains challenging due to low energy efficiency and the prevalent hydrogen evolution reaction (HER) on the same catalyst, leading to high hydrogenation rates. In this review, we aim to elucidate the fundamental challenges of C-C coupling and explore potential strategies to enhance the selectivity for higher hydrocarbon products. We discuss the mechanisms underlying the formation of C2 and C3 products, focusing on molecular catalysts that facilitate C-C coupling by positioning CO2 molecules in close proximity. Additionally, we provide a comprehensive overview of different approaches to improve higher hydrocarbon selectivity, along with future suggestions and recommendations for new researchers in the field. This review serves as a valuable resource for both academic researchers and industrial stakeholders aiming for the commercialization of CO2RR technologies.

Enhanced Electron Delocalization Induced by Ferromagnetic Sulfur doped C3N4 Triggers Selective H2O2 Production.

For the 2D metal-free carbon catalysts, the atomic coplanar architecture enables a large number of pz orbitals to overlap laterally, thus forming π-electron delocalization, and the delocalization degree of the central atom dominates the catalytic activity. Herein, designing sulfur-doped defect-rich graphitic carbon nitride (S-Nv-C3N4) materials as a model, we propose a strategy to promote localized electron polarization by enhancing the ferromagnetism of ultra-thin 2D carbon nitride nanosheets. The introduction of sulfur (S) further promotes localized ferromagnetic coupling, thereby inducing long-range ferromagnetic ordering and accelerating the electron interface transport. Meanwhile, the hybridization of sulfur atoms breaks the symmetry and integrity of the unit structure, promotes electron enrichment and stimulating electron delocalization at the active site. This optimization enhances the *OOH desorption, providing a favorable kinetic pathway for the production of hydrogen peroxide (H2O2). Consequently, S-Nv-C3N4 exhibits high selectivity (>95 %) and achieves a superb H2O2 production rate, approaching 4374.8 ppm during continuous electrolysis over 300 hour. According to theoretical calculation and in situ spectroscopy, the ortho-S configuration can provide ferromagnetic perturbation in carbon active centers, leading to the electron delocalization, which optimizes the OOH* adsorption during the catalytic process.

Monomicelle-Directed Engineering of Strained Carbon Nanoribbons as Oxygen Reduction Catalyst.

To date, precisely tailoring local active sites of well-defined earth-abundant metal-free carbon-based electrocatalysts for attractive electrocatalytic oxygen reduction reaction (ORR), remains challenging. Herein, the authors successfully introduce a strain effect on active C-C bonds adjacent to edged graphitic nitrogen (N), which raises appropriate spin-polarization and charge density of carbon active sites and kinetically favor the facilitation of O2 adsorption and the activation of O-containing intermediates. Thus, the constructed metal-free carbon nanoribbons (CNRs-C) with high-curved edges exhibit outstanding ORR activity with half-wave potentials of 0.78 and 0.9 V in 0.5 m H2 SO4 and 0.1 m KOH, respectively, overwhelming the planar one (0.52 and 0.81 V) and the N-doped carbon sheet (0.41 and 0.71 V). Especially in acidic media, the kinetic current density (Jk ) is 18 times higher than that of the planar one and the N-doped carbon sheet. Notably, these findings show the spin polarization of the asymmetric structure by introducing a strain effect on the C-C bonds for boosting ORR.

Evolution of Stabilized 1T-MoS2 by Atomic-Interface Engineering of 2H-MoS2 /Fe-Nx towards Enhanced Sodium Ion Storage.

Metallic conductive 1T phase molybdenum sulfide (MoS2 ) has been identified as promising anode for sodium ion (Na+ ) batteries, but its metastable feature makes it difficult to obtain and its restacking during the charge/discharge processing result in part capacity reversibility. Herein, a synergetic effect of atomic-interface engineering is employed for constructing 2H-MoS2 layers assembled on single atomically dispersed Fe-N-C (SA Fe-N-C) anode material that boosts its reversible capacity. The work-function-driven-electron transfer occurs from SA Fe-N-C to 2H-MoS2 via the Fe-S bonds, which enhances the adsorption of Na+ by 2H-MoS2 , and lays the foundation for the sodiation process. A phase transfer from 2H to 1T/2H MoS2 with the ferromagnetic spin-polarization of SA Fe-N-C occurs during the sodiation/desodiation process, which significantly enhances the Na+ storage kinetics, and thus the 1T/2H MoS2 /SA Fe-N-C display a high electronic conductivity and a fast Na+ diffusion rate.

Electron spin modulation engineering in oxygen-involved electrocatalysis.

Electrocatalytic oxygen reduction reaction (ORR) and oxygen evolution reduction (OER) are regarded as the key reactions via the sustainable system (fuel cell and water splitting), respectively. In OER, the transition from singlet oxygen species to triplet oxygen molecules is involved, meanwhile the ORR involves the transition from triplet oxygen molecules to singlet oxygen species. However, in these processes, the number of unpaired electrons is not conserved, which is not thermodynamically favorable and creates an additional energy barrier. Fortunately, regulating the electrocatalysis by spin-state modulation enables a unique effect on the catalytic performance, but the current understanding on spin-state engineering for electro-catalyzing ORR and OER is still insufficient. Herein, this review summarized the in-spin engineering for the state-of-the-art ORR and OER electrocatalysts. It began by introducing engineering of spin-state to egfilling for ORR and OER process, and then moved to spin polarization and spin-pinning effect for OER process. Various designed strategies focusing on how to regulate the spin-state of the active center have been summarized up. The connectivity of the structures of typical ORR (e.g. metal-nitrogen-carbon) and OER (e.g. design strategies oxides, metal organic frameworks) catalysts depending on the spin level is also discussed. Finally, we present the outlook from the aspects of template catalysts, characterization methods, regulation strategies, theoretical calculations, which will further expand the possibility of better electrocatalytic performance through spin-state modulation. This review concluded some open suggestions and prospects, which are worthy of the community's future work.

Concave Pt-Zn Nanocubes with High-Index Faceted Pt Skin as Highly Efficient Oxygen Reduction Catalyst.

High dosage of expensive Pt to catalyze the sluggish oxygen reduction reaction (ORR) on the cathode severely impedes the commercialization of proton exchange membrane fuel cells. Therefore, it is urgent to cut down the Pt catalyst by efficiently improving the ORR activity while maintaining high durability. Herein, magic concave Pt-Zn nanocubes with high-index faceted Pt skin (Pt78 Zn22 ) are proposed for high-efficiency catalysis toward proton exchange membrane fuel cells. These unique structural features endow the Pt-skin Pt78 Zn22 /KB with a mass activity of 1.18 mA µgPt -1 and a specific activity of 3.64 mA cm-2 for the ORR at 0.9 V (vs RHE). Meanwhile, the H2 -O2 fuel cell assembled by this catalyst delivers an ultrahigh peak power density of ≈1449 mW cm-2 . Both experiments and theoretical calculations show that the electronic structure of the surface is adjusted, thereby shortening the length of the Pt-Pt bond and reducing the adsorption energy of OH*/O* on the Pt surface. This work demonstrates the synergistic effect of the oxidation-resistant metal Zn and the construction of Pt-rich surface engineering. Also, it guides the future development of catalysts for their practical applications in energy conversion technologies and beyond.

Boosting Nitrogen Reduction to Ammonia on FeN4 Sites by Atomic Spin Regulation.

Understanding the relationship between the electronic state of active sites and N2 reduction reaction (NRR) performance is essential to explore efficient electrocatalysts. Herein, atomically dispersed Fe and Mo sites are designed and achieved in the form of well-defined FeN4 and MoN4 coordination in polyphthalocyanine (PPc) organic framework to investigate the influence of the spin state of FeN4 on NRR behavior. The neighboring MoN4 can regulate the spin state of Fe center in FeN4 from high-spin (dxy 2 dyz 1 dxz 1 d z 2 1 d x 2 - y 2 1 ) to medium-spin (dxy 2 dyz 2 dxz 1 d z 2 1 ), where the empty d orbitals and separate d electron favor the overlap of Fe 3d with the N 2p orbitals, more effectively activating N≡N triple bond. Theoretical modeling suggests that the NRR preferably takes place on FeN4 instead of MoN4 , and the transition of Fe spin state significantly lowers the energy barrier of the potential determining step, which is conducive to the first hydrogenation of N2 . As a result, FeMoPPc with medium-spin FeN4 exhibits 2.0 and 9.0 times higher Faradaic efficiency and 2.0 and 17.2 times higher NH3 yields for NRR than FePPc with high-spin FeN4 and MoPPc with MoN4 , respectively. These new insights may open up opportunities for exploiting efficient NRR electrocatalysts by atomically regulating the spin state of metal centers.

Inactivating SARS-CoV-2 by electrochemical oxidation.

Fully inactivating SARS-CoV-2, the virus causing coronavirus disease 2019, is of key importance for interrupting virus transmission but is currently performed by using biologically or environmentally hazardous disinfectants. Herein, we report an eco-friendly and efficient electrochemical strategy for inactivating the SARS-CoV-2 using in-situ formed nickel oxide hydroxide as anode catalyst and sodium carbonate as electrolyte. At a voltage of 5 V, the SARS-CoV-2 viruses can be rapidly inactivated with disinfection efficiency reaching 95% in only 30 s and 99.99% in 5 min. Mass spectrometry analysis and theoretical calculations indicate that the reactive oxygen species generated on the anode can oxidize the peptide chains and induce cleavage of the peptide backbone of the receptor binding domain of the SARS-CoV-2 spike glycoprotein, and thereby disables the virus. This strategy provides a sustainable and highly efficient approach for the disinfection of the SARS-CoV-2 viruliferous aerosols and wastewater.

Defect Engineering on Carbon-Based Catalysts for Electrocatalytic CO2 Reduction.

Electrocatalytic carbon dioxide (CO2) reduction (ECR) has become one of the main methods to close the broken carbon cycle and temporarily store renewable energy, but there are still some problems such as poor stability, low activity, and selectivity. While the most promising strategy to improve ECR activity is to develop electrocatalysts with low cost, high activity, and long-term stability. Recently, defective carbon-based nanomaterials have attracted extensive attention due to the unbalanced electron distribution and electronic structural distortion caused by the defects on the carbon materials. Here, the present review mainly summarizes the latest research progress of the construction of the diverse types of defects (intrinsic carbon defects, heteroatom doping defects, metal atomic sites, and edges detects) for carbon materials in ECR, and unveil the structure-activity relationship and its catalytic mechanism. The current challenges and opportunities faced by high-performance carbon materials in ECR are discussed, as well as possible future solutions. It can be believed that this review can provide some inspiration for the future of development of high-performance ECR catalysts.

Interfacial engineering of Ag nanodots/MoSe2 nanoflakes/Cu(OH)2 hybrid-electrode for lithium-ion battery.

Although the Lithium ion batteries (LIBs) have attracted remarkable attentions, their practical development is hindered by the low rate performance and poor unit area capacity, which is significantly caused by the low conductivity of the active electrode materials. Herein, a three-dimensional (3D) architecture consisting of Ag nanodots embedded MoSe2 sheets wrapping Cu(OH)2 nanorods (Cu(OH)2/MoSe2/Ag) hybrids were in-situ synthesized on self-standing Cu- foam collector for LIBs application. The 2D MoSe2 nanoflakes supported on 1D highly conductive Cu nanowires provides efficient pathways for both electrons and ions. The embedded Ag nanodots in the MoSe2 as the internal-plane active sites not only improves the intrinsic conductivity but also allows the reversible formation and decompose of Ag-Li alloy, and thus leading to the promotion of Li+ ion storage. As a result, the Cu(OH)2/MoSe2/Ag electrode exhibits a high reversible discharge capacity of 1285.5 mAh g-1 (current density of 0.2 C), good rate performance (discharge-specific capacity remained 544.8 mAh g-1 at 5.0C), and excellent cycling stability (with almost no decay after 500 cycles). Significantly, the 3D Cu(OH)2/MoSe2/Ag electrode exhibits a high areal capacity of 2.50 mAh cm-2 at a high current density of 1.82 mA cm-2. This work provides the new insight into interfaces engineering for 3D architecture toward advanced self-standing LIB electrodes.

Recent Progress on Two-Dimensional Nanoflake Ensembles for Energy Storage Applications.

The rational design and synthesis of two-dimensional (2D) nanoflake ensemble-based materials have garnered great attention owing to the properties of the components of these materials, such as high mechanical flexibility, high specific surface area, numerous active sites, chemical stability, and superior electrical and thermal conductivity. These properties render the 2D ensembles great choices as alternative electrode materials for electrochemical energy storage systems. More recently, recognition of the numerous advantages of these 2D ensemble structures has led to the realization that the performance of certain devices could be significantly enhanced by utilizing three-dimensional (3D) architectures that can furnish an increased number of active sites. The present review summarizes the recent progress in 2D ensemble-based materials for energy storage applications, including supercapacitors, lithium-ion batteries, and sodium-ion batteries. Further, perspectives relating to the challenges and opportunities in this promising research area are discussed.

Sulfuration of an Fe-N-C Catalyst Containing Fex C/Fe Species to Enhance the Catalysis of Oxygen Reduction in Acidic Media and for Use in Flexible Zn-Air Batteries.

During the preparation of atomically dispersed Fe-N-C catalysts, it is difficult to avoid the formation of iron-carbide-containing iron clusters ("Fex C/Fe"), along with the desired carbon matrix containing dispersed FeNx sites. As a result, an uncertain amount of the oxygen reduction reaction (ORR) occurs, making it difficult to maximize the catalytic efficiency. Herein, sulfuration is used to boost the activity of Fex C/Fe, forming an improved system, "FeNC-S-Fex C/Fe", for catalysis involving oxygen. Various spectroscopic techniques are used to define the composition of the active sites, which include Fe-S bonds at the interface of the now-S-doped carbon matrix and the Fex C/Fe clusters. In addition to outstanding activity in basic media, FeNC-S-Fex C/Fe exhibits improved ORR activity and durability in acidic media; its half-wave potential of 0.821 V outperforms the commercial Pt/C catalyst (20%), and its activity does not decay even after 10 000 cycles. Interestingly, the catalytic activity for the oxygen evolution reaction (OER) simultaneously improves. Thus, FeNC-S-Fex C/Fe can be used as a high-performance bifunctional catalyst in Zn-air batteries. Theoretical calculations and control experiments show that the original FeNx active centers are enhanced by the Fex C/Fe clusters and the Fe-S and C-S-C bonds.

Carbon Nanosheets Containing Discrete Co-Nx-By-C Active Sites for Efficient Oxygen Electrocatalysis and Rechargeable Zn-Air Batteries.

Structural and compositional engineering of atomic-scaled metal-N-C catalysts is important yet challenging in boosting their performance for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Here, boron (B)-doped Co-N-C active sites confined in hierarchical porous carbon sheets (denoted as Co-N,B-CSs) were obtained by a soft template self-assembly pyrolysis method. Significantly, the introduced B element gives an electron-deficient site that can activate the electron transfer around the Co-N-C sites, strengthen the interaction with oxygenated species, and thus accelerate reaction kinetics in the 4e- processed ORR and OER. As a result, the catalyst showed Pt-like ORR performance with a half-wave potential (E1/2) of 0.83 V versus (vs) RHE, a limiting current density of about 5.66 mA cm-2, and higher durability (almost no decay after 5000 cycles) than Pt/C catalysts. Moreover, a rechargeable Zn-air battery device comprising this Co-N,B-CSs catalyst shows superior performance with an open-circuit potential of ∼1.4 V, a peak power density of ∼100.4 mW cm-2, as well as excellent durability (128 cycles for 14 h of operation). DFT calculations further demonstrated that the coupling of Co-Nx active sites with B atoms prefers to adsorb an O2 molecule in side-on mode and accelerates ORR kinetics.

2D MOF Nanoflake-Assembled Spherical Microstructures for Enhanced Supercapacitor and Electrocatalysis Performances.

Metal-organic frameworks (MOFs) are of great interest as potential electrochemically active materials. However, few studies have been conducted into understanding whether control of the shape and components of MOFs can optimize their electrochemical performances due to the rational realization of their shapes. Component control of MOFs remains a significant challenge. Herein, we demonstrate a solvothermal method to realize nanostructure engineering of 2D nanoflake MOFs. The hollow structures with Ni/Co- and Ni-MOF (denoted as Ni/Co-MOF nanoflakes and Ni-MOF nanoflakes) were assembled for their electrochemical performance optimizations in supercapacitors and in the oxygen reduction reaction (ORR). As a result, the Ni/Co-MOF nanoflakes exhibited remarkably enhanced performance with a specific capacitance of 530.4 F g-1 at 0.5 A g-1 in 1 M LiOH aqueous solution, much higher than that of Ni-MOF (306.8 F g-1) and ZIF-67 (168.3 F g-1), a good rate capability, and a robust cycling performance with no capacity fading after 2000 cycles. Ni/Co-MOF nanoflakes also showed improved electrocatalytic performance for the ORR compared to Ni-MOF and ZIF-67. The present work highlights the significant role of tuning 2D nanoflake ensembles of Ni/Co-MOF in accelerating electron and charge transportation for optimizing energy storage and conversion devices.