Practical Considerations for Laser-Induced Graphene Pressure Sensors Used in Marine Applications.

Small, low-power, and inexpensive marine depth sensors are of interest for a myriad of applications from maritime security to environmental monitoring. Recently, laser-induced graphene (LIG) piezoresistive pressure sensors have been proposed given their rapid fabrication and large dynamic range. In this work, the practicality of LIG integration into fieldable deep ocean (1 km) depth sensors in bulk is explored. Initially, a design of experiments (DOEs) approach evaluated laser engraver fabrication parameters such as line length, line width, laser speed, and laser power on resultant resistances of LIG traces. Next, uniaxial compression and thermal testing at relevant ocean pressures up to 10.3 MPa and temperatures between 0 and 25 °C evaluated the piezoresistive response of replicate sensors and determined the individual characterization of each, which is necessary. Additionally, bare LIG sensors showed larger resistance changes with temperature (ΔR ≈ 30 kΩ) than pressure (ΔR ≈ 1-15 kΩ), indicating that conformal coatings are required to both thermally insulate and electrically isolate traces from surrounding seawater. Sensors encapsulated with two dip-coated layers of 5 wt% polydimethylsiloxane (PDMS) silicone and submerged in water baths from 0 to 25 °C showed significant thermal dampening (ΔR ≈ 0.3 kΩ), indicating a path forward for the continued development of LIG/PDMS composite structures. This work presents both the promises and limitations of LIG piezoresistive depth sensors and recommends further research to validate this platform for global deployment.

Characterization of photochemical losses of volatile organic compounds and their implications for ozone formation potential and source apportionment during summer in suburban Jinan, China.

Volatile organic compounds (VOCs) undergo substantial photochemical losses during their transport from emission sources to receptor sites, resulting in serious implications for their source apportionment and ozone (O3) formation. Based on the continuous measurements of VOCs in suburban Jinan in August 2022, the effects of photochemical losses on VOC source contributions and O3 formation were evaluated in this study. The observed and initial concentrations of total VOCs (TVOC) were 12.0 ± 5.1 and 16.0 ± 7.4 ppbv, respectively. Throughout the observation period, alkenes had the most prominent photochemical losses (58.2%), followed by aromatic hydrocarbons (23.1%), accounting for 80.6% and 6.9% of the total losses, respectively. During high O3 episodes, the photochemical loss of VOCs was 6.9 times higher than that during the cleaning period. Alkene losses (exceeding 67.3%), specifically losses of isoprene, propylene, ethylene, and n-butene, dominated the total losses of VOCs during the O3 increase period. Eight sources of VOCs were identified by positive matrix factorization (PMF) based on the observed and initial concentration data (OC-PMF and IC-PMF, respectively). Concentrations of all emission sources in the OC-PMF were underestimated by 2.4%-57.1%. Moreover, the contribution of each emission source was over- or underestimated compared with that in case of the IC-PMF. The contributions of biogenic and motor vehicle exhaust emissions were underestimated by 5.3 and 2.8 percentage points, respectively, which was associated with substantial oxidation of the emitted high-reactive species. The contributions of coal/biomass burning and natural gas were overestimated by 2.4 and 3.9 percentage points, respectively, which were related to the emission of low-reactive species (acetylene, ethane, and propane). Based on our results, the photochemical losses of VOCs grossly affect their source apportionment and O3 formation. Thus, photochemical losses of VOCs must be thoroughly accounted to establish a precise scientific foundation for air-pollution control strategies.

Co-circulation and co-infection of hantaviruses and Wenzhou mammarenavirus in small mammals and humans in Jiangxi, China.

Both Orthohantaviruses (HV) and Whenzhou Mammarenaviruses (WENV) are rodents borne viruses, allowing them to spread simultaneously in the same area and infect humans. To explore the potential threat of HV and WENV to public health safety, an environmental and laboratory investigation was conducted in 2020-2021, in Jiangxi province, China. A total of 461 small mammals of 7 species and paired sera from 43 suspected HFRS cases were collected from Jiangxi Province, China. Viral genomic RNA and specific antibodies against HV and WENV were detected to evaluate the epidemic situation of the two viruses. Hantaan virus (HTNV), seoul virus (SEOV) and WENV RNA were detected in the lungs of the captured mammals, which resulted 4.1% and 7.4% of HV and WENV RNA positive respectively. Co-infections of WENV and SEOV were detected from Rattus norvegicus, Mus musculus and Rattus flavipectus with an overall co-infection rate of 0.65%. The detection rates of antibodies in the blood against HV and WENV were 11.9% (55/461), and 13.2% (61/461) respectively. The prevalence of viral infection and viral genetic characters varied among the selected areas. In the paired sera of 43 suspected HFRS cases, 38 were with HV infection, 11 were with WENV IgG, and 7 with a 4-fold or more of WENV IgG titer elevation. These results revealed the fact of the co-circulating and coinfection of HV and WENV in the same area at the same time, which might impact on public health safety.

Two-year online measurements of volatile organic compounds (VOCs) at four sites in a Chinese city: Significant impact of petrochemical industry.

Volatile organic compounds (VOCs) management has been recently given a high priority in China to mitigate ozone (O3) air pollution. However, there is a relatively poor understanding of VOCs due to their complexity and fewer observations. To better understand the pollution characteristics of VOCs and their impact on O3 pollution, two-year continuous measurements were conducted at four representative sites in Ji'nan, eastern China. These four sites cover urban, background, and industrial areas (within a petroleum refinery). Ambient VOCs showed higher concentrations at industrial site than at urban and background sites, owing to intensive emissions from petrochemical industry. The VOCs compositions present spatial heterogeneity with alkenes dominated in total reactivity at urban and background sites, while alkenes and aromatics together dominated at industrial site. The VOCs emission profile from petrochemical industry was calculated based on observational data, which revealed a huge impact on light alkanes (C2-C5), light alkenes (ethene), and aromatics (toluene and m/p-xylene). The positive matrix factorization (PMF) model analysis further refined the impact of different petrochemical industrial processes. Alkanes and alkenes dominated the emissions during refining process, while aromatics dominated during solvent usage process. Analysis by an observation-based model indicated stronger in-situ O3 production and higher sensitivity to nitrogen oxides at industrial site compared to urban and background sites. The reduction of VOCs emissions from petrochemical industry would significantly reduce the O3 concentrations. The analyses underline the significant impact of petrochemical industry on VOCs and O3 pollution, and provide important reference for the formulation of refined and effective control strategies.

Simultaneously Enhanced Hydrophilicity and Stability of a Metal-Organic Framework via Post-Synthetic Modification for Water Vapor Sorption/Desorption.

With increasing demands for high-performance water sorption materials, metal-organic frameworks (MOFs) have gained considerable attention due to their high maximum uptake capacities. In many cases, however, high overall capacity is not necessarily accomplishing high working capacity under operating conditions, due to insufficient hydrophilicity and/or water stability. Herein, we present a post-synthetic modification (PSM) of MOF-808, with di-sulfonic acids enhancing simultaneously its hydrophilicity and water stability without sacrificing its uptake capacity of ≈30 mmol g-1 . Di-sulfonic acid PSM enabled a shift of the relative humidity (RH) associated with a sharp step in water vapor sorption from 35-40 % RH in MOF-808 to below 25 % RH. While MOF-808 lost uptake capacity and crystallinity over multiple sorption/desorption cycles, the di-sulfonic acid PSM MOF-808 retained >80 % of the original capacity. PSM MOF-808 exhibited good hydrothermal stability up to 60 °C and high swing capacity.

Soft CNT-Polymer Composites for High Pressure Sensors.

Carbon−polymer composite-based pressure sensors have many attractive features, including low cost, easy integration, and facile fabrication. Previous studies on carbon−polymer composite sensors focused on very high sensitivities for low pressure ranges (10 s of kPa), which saturate quickly at higher pressures and thus are ill-suited to measure the high pressure ranges found in various applications, including those in underwater (>1 atm, 101 kPa) and industrial environments. Current sensors designed for high pressure environments are often difficult to fabricate, expensive, and, similarly to their low-pressure counterparts, have a narrow sensing range. To address these issues, this work reports the design, synthesis, characterization, and analysis of high-pressure TPU-MWCNT based composite sensors, which detect pressures from 0.5 MPa (4.9 atm) to over 10 MPa (98.7 atm). In this study, the typical approach to improve sensitivity by increasing conductive additive concentration was found to decrease sensor performance at elevated pressures. It is shown that a better approach to elevated pressure sensitivity is to increase sensor response range by decreasing the MWCNT weight percentage, which improves sensing range and resolution. Such sensors can be useful for measuring high pressures in many industrial (e.g., manipulator feedback), automotive (e.g., damping elements, bushings), and underwater (e.g., depth sensors) applications.

Ageing characterization data of lithium-ion battery with highly deteriorated state and wide range of state-of-health.

This paper presents ageing characterization data of two lithium-ion battery cells that have been put through a deep ageing process. At the end of ageing process, the values of state-of-health (SOH) of the battery cells drop down to around 15%. The battery cells are aged using a developed autonomous ageing platform which performs functions such as constant current (CC) discharging, CC charging, and constant voltage (CV) charging. Each time the battery cell completes 30 ageing cycles, battery performance tests including dc impedance measurement, minimum impedance measurement, and capacity calibration are conducted to characterize the ageing or health status of the battery cell. The collected battery dc impedance data, minimum impedance data, capacity data, and CC-CV charging time for the deeply aged battery cells are presented in this paper. The presented data has the potential to help in identifying battery ageing behavior patterns. It can also be utilized to investigate the correlation or relationship between different battery ageing characterization data and to develop SOH estimation methods for lithium-ion batteries with high degradation conditions, for examples, for second-use battery and when battery health exhibits unexpected faster deterioration.

An Untethered Soft Robot Based on Liquid Crystal Elastomers.

An untethered, soft robot using liquid crystal elastomer (LCE) actuators, onboard power, and wireless Bluetooth control was developed. LCE actuators were thermally triggered using Joule heating and demonstrated an ∼5 N force pull capacity per LCE. A >20% repeatable strain was demonstrated over >100 cycles with minimal loss of strain at high cycle numbers. The LCE actuators were horizontally oriented to maximize conversion of LCE contraction to overall robot movement. A battery and control board were integrated into the body of the robot, which allowed for Bluetooth control of the LCE on/off cycle. System level programming and design were implemented to offset the slow recovery associated with LCE actuators. The multiple LCE actuator legs were programmed to allow individual control of on/off cycles for each leg. LCE leg actuation was alternated between inner and outer legs to provide horizontal movement with minimized loss of motion during the LCE recovery cycle by actuating one set of legs during the recovery cycle of the other set for a maximum movement speed of 1.27 cm/min. Path control was also demonstrated by turning the robot by actuating two LCE legs on one side of the robot. The robot was able to pull up to 1400 g in ideal frictional conditions, allowing the possibility of payload transport, additional battery storage, or onboard sensors. Additional design considerations are discussed to further improve overall robot speed in the future by combining system and material level design considerations.

Novel niobium-doped titanium oxide towards electrochemical destruction of forever chemicals.

Electrochemical advanced oxidative processes (EAOP) are a promising route to destroy recalcitrant organic contaminants such as per- and polyfluoroalkyl substances (PFAS) in drinking water. Central to EAOP are catalysis-induced reactive free radicals for breaking the carbon fluorine bonds in PFAS. Generating these reactive species electrochemically at electrodes provides an advantage over other oxidation processes that rely on chemicals or other harsh conditions. Herein, we report on the performance of niobium (Nb) doped rutile titanium oxide (TiO2) as a novel EAOP catalytic material, combining theoretical modeling with experimental synthesis and characterization. Calculations based on density functional theory are used to predict the overpotential for oxygen evolution at these candidate electrodes, which must be high in order to oxidize PFAS. The results indicate a non-monotonic trend in which Nb doping below 6.25 at.% is expected to reduce performance relative to TiO2, while higher concentrations up to 12.5 at.% lead to increased performance, approaching that of state-of-the-art Magnéli Ti4O7. TiO2 samples were synthesized with Nb doping concentration at 10 at.%, heat treated at temperatures from 800 to 1100 °C, and found to exhibit high oxidative stability and high generation of reactive oxygen free radical species. The capability of Nb-doped TiO2 to destroy two common species of PFAS in challenge water was tested, and moderate reduction by ~ 30% was observed, comparable to that of Ti4O7 using a simple three-electrode configuration. We conclude that Nb-doped TiO2 is a promising alternative EAOP catalytic material with increased activity towards generating reactive oxygen species and warrants further development for electrochemically destroying PFAS contaminants.

WITHDRAWN: Analysis of Clinical Stage and Nerve Damage of Endometrial Carcinoma Diagnosed by Hysteroscopy of Artificial Intelligence Computer Information.

This article has been withdrawn at the request of the Editor-in-Chief. The Publisher apologizes for any inconvenience this may cause. The full Elsevier Policy on Article Withdrawal can be found at https://www.elsevier.com/about/our-business/policies/article-withdrawal.

Reversible Atmospheric Water Harvesting Using Metal-Organic Frameworks.

The passive capture of clean water from humid air without reliance on bulky equipment and high energy has been a substantial challenge and has attracted significant interest as a potential environmentally friendly alternative to traditional water harvesting methods. Metal-organic frameworks (MOFs) offer a high potential for this application due to their structural versatility which permits scalable, facile modulations of structural and functional elements. Although MOFs are promising materials for water harvesting, little research has been done to address the microstructure-adsorbing characteristics relationship with respect to the dynamic adsorption-desorption process. In this article, we present a parametric study of nine hydrolytically stable MOFs with diverse structures for unraveling fundamental material properties that govern the kinetics of water sequestration in this class of materials as well as investigating overall uptake capacity gravimetrically. The effects of temperature, relative humidity, and powder bed thickness on the adsorption-desorption process are explored for achieving optimal operational parameters. We found that Zr-MOF-808 can produce up to 8.66 LH2O kg-1MOF day-1, an extraordinary finding that outperforms any previously reported values for MOF-based systems. The presented findings help to deepen our understanding and guide the discovery of next-generation water harvesting materials.

Advanced Filtration Membranes for the Removal of Perfluoroalkyl Species from Water.

Perfluorooctane sulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) are two perfluoroalkyl substances that have been shown to result in several adverse health effects, including birth defects, kidney/testicular cancer, as well as liver and thyroid damage. The surfactant nature of PFOS and PFOA in water makes these compounds extremely difficult to remove from drinking water. In this paper, an efficient method to remove PFOS and PFOA from drinking water using linear fluorinated silane-functionalized aluminum oxide hydroxide (γ-AlOOH) nanowhiskers was developed. Filters functionalized with linear fluorinated silanes containing 13-17 fluorine atoms were able to remove >90% of the PFOS/PFOA at a very high flux of 1223 L/m2·h. However, due to the hydrophobicity of these linear fluorinated silanes, high pressure drop was also noted across the membrane thickness during the filtration process. To reduce the back-pressure drop, linear fluorinated silanes with appended hydrophilic poly(ethylene glycol) units were synthesized, and it was further demonstrated that the new hydrophilic linear fluorinated silane dramatically reduced the pressure drop of the γ-AlOOH filter while maintaining 99.9% PFOS and PFOA reduction. Adsorption tests were performed to understand the removal mechanism.

Transcriptome analysis of the molecular mechanism underlying immunity- and reproduction trade-off in Locusta migratoria infected by Micrococcus luteus.

Immune response and reproductive success are two vital energy-consuming processes in living organisms. However, it is still unclear which process is prioritized when both are required. Therefore, the present study was designed to examine this question arising for one of the world's most destructive agricultural pests, the migratory locust, Locusta migratoria. Transcripts from the ovaries and fat bodies of newly emerged locusts were analyzed, using RNA-seq based transcriptome and qualitative real-time PCR, at 4 h and 6 d after being infected with the gram-positive bacteria Micrococcus luteus. Changes in the main biological pathways involved in reproduction and immunization were analyzed using bioinformatics. After 4 h of infection, 348 and 133 transcripts were up- and down-regulated, respectively, whereas 5699 and 44 transcripts were up- and down-regulated, respectively, at 6 d after infection. Moreover, KEGG analysis indicated that vital pathways related with immunity and reproduction, such as Insulin resistance, FoxO signaling, Lysosome, mTOR signaling, and Toll-like receptor signaling pathways were up-regulated. Among the differentially expressed genes, 22 and 17 were related to immunity and reproduction, respectively. The expression levels of PPO1 and antimicrobial peptide defensin 3 were increased (log2FC = 5.93 and 6.75, respectively), whereas those of VgA and VgB were reduced (log2FC = -17.82 and -18.13, respectively). These results indicated that locust allocate energy and resources to maintain their own survival by increasing immune response when dealing with both immune and reproductive processes. The present study provides the first report of expression levels for genes related with reproduction and immunity in locusts, thereby providing a reference for future studies, as well as theoretical guidance for investigations of locust control.

A Feedback Loop between Hypoxia and Matrix Stress Relaxation Increases Oxygen-Axis Migration and Metastasis in Sarcoma.

Upregulation of collagen matrix crosslinking directly increases its ability to relieve stress under the constant strain imposed by solid tumor, a matrix property termed stress relaxation. However, it is unknown how rapid stress relaxation in response to increased strain impacts disease progression in a hypoxic environment. Previously, it has been demonstrated that hypoxia-induced expression of the crosslinker procollagen-lysine, 2-oxoglutarate 5-dioxygenase 2 (PLOD2), in sarcomas has resulted in increased lung metastasis. Here, we show that short stress relaxation times led to increased cell migration along a hypoxic gradient in 3D collagen matrices, and rapid stress relaxation upregulated PLOD2 expression via TGFß-SMAD2 signaling, forming a feedback loop between hypoxia and the matrix. Inhibition of this pathway led to a decrease in migration along the hypoxic gradients. In vivo, sarcoma primed in a hypoxic matrix with short stress relaxation time enhanced collagen fiber size and tumor density and increased lung metastasis. High expression of PLOD2 correlated with decreased overall survival in patients with sarcoma. Using a patient-derived sarcoma cell line, we developed a predictive platform for future personalized studies and therapeutics. Overall, these data show that the interplay between hypoxia and matrix stress relaxation amplifies PLOD2, which in turn accelerates sarcoma cell motility and metastasis. SIGNIFICANCE: These findings demonstrate that mechanical (stress relaxation) and chemical (hypoxia) properties of the tumor microenvironment jointly accelerate sarcoma motility and metastasis via increased expression of collagen matrix crosslinker PLOD2.

'Seeing' Strain in Soft Materials.

Several technologies can be used for measuring strains of soft materials under high rate impact conditions. These technologies include high speed tensile test, split Hopkinson pressure bar test, digital image correlation and high speed X-ray imaging. However, none of these existing technologies can produce a continuous 3D spatial strain distribution in the test specimen. Here we report a novel passive strain sensor based on poly(dimethyl siloxane) (PDMS) elastomer with covalently incorporated spiropyran (SP) mechanophore to measure impact induced strains. We have shown that the incorporation of SP into PDMS at 0.25 wt% level can adequately measure impact strains via color change under a high strain rate of 1500 s-1 within a fraction of a millisecond. Further, the color change is fully reversible and thus can be used repeatedly. This technology has a high potential to be used for quantifying brain strain for traumatic brain injury applications.

Incidence and risk factors for surgical site infection after open reduction and internal fixation of ankle fracture: A retrospective multicenter study.

Information on surgical site infection (SSI) after surgical treatment of ankle fracture is limited and remains controversial. The purpose of the present study was to determine the incidence and risk factors for SSI after open reduction and internal fixation (ORIF) of ankle fracture. Patients who underwent ORIF for ankle fracture at 3 centers between January 2015 and December 2016 were included. The potential risk factors for SSI included demographic variables, including age, sex, body mass index (BMI), hypertension, diabetes mellitus, heart disease, smoking, and excessive alcohol intake; blood test variables including preoperative white blood cell count, neutrophil count, red blood cell count, hemoglobin, total protein, albumin and globulin; injury- and surgery-related variables, including duration of operation (minutes), intraoperative blood loss, surgeon level, fracture site, accompanied dislocation, use of a drainage tube, and antibiotic use. Factors related with SSI occurrence were investigated by univariate analysis, and then by multivariate analysis. During hospitalization, 4.37% (66/1511) of patients developed SSI, which was deep in 1.32% (20/1510) and superficial in 3.05% (46/1510). The most common causative agent was polymicrobial (causing approximately half of all SSIs), followed by methicillin-resistant Staphylococcus aureus (MRSA). Multivariate analysis revealed that the significant risk factors for SSI occurrence were open injury, advanced age, incision cleanliness II - IV, high-energy injury, more experienced surgeon level, greater BMI, chronic heart disease, history of allergy, and preoperative neutrophil count > 75%. Preoperative preventative measures should be taken in patients with these conditions to lower the incidence of SSI after ORIF of ankle fracture. LEVEL OF EVIDENCE: Level III - Retrospective Comparative Study.

Collagen Fiber Architecture Regulates Hypoxic Sarcoma Cell Migration.

Collagen is prevalent in the microenvironment of many cancer types and has been demonstrated to play an important role during disease progression. We previously showed the importance of hypoxic gradients in sarcoma cell migration. Here, we utilized an oxygen gradient collagen gel platform to determine the impact of collagen fiber density and hypoxic gradient on sarcoma cell migration. The oxygen gradient was created by regulating the oxygen diffusion coefficient along with the cellular oxygen consumption rate. Collagen fiber density in the hydrogels is modified by changing the preincubation period of the collagen gel solution at 4 °C, controlling fiber density independently of collagen concentration and oxygen tension. High fiber density gels have wider and longer fibers but a similar microscale pore size with a larger nanoscale pore size and quicker stress relaxation time, compared to the low fiber density gel. Both gels have the same Young's modulus. We analyzed responses of sarcoma cells encapsulated in the different hydrogels for 3 days. In the nonhypoxic low fiber density constructs, sarcoma cells exhibit a larger aspect ratio, and the matrix has less fiber alignment compared to the nonhypoxic high fiber density constructs. Interestingly, we found a minimal effect of fiber density on cell migration and the ability of the cells to degrade the matrix in nonhypoxic constructs. When compared with hypoxic constructs, we observed the opposite trend, where cells in low fiber density constructs exhibit a lower aspect ratio and the matrix has more aligned fibers compared to hypoxic high fiber density constructs. Sarcoma cells encapsulated in high fiber density hypoxic gels migrated faster and degraded the matrix more rapidly compared to the low fiber density hypoxic constructs. Overall, we show that hypoxic cell migration and matrix degradation are enhanced in high fiber density gels, while hypoxic matrix alignment is prominent in low fiber density gels. Our results suggest that the differences in cellular responses under hypoxic gradients are due to the hydrogel architecture including fiber density, size (length and width), and stress relaxation.

Enhanced elastin synthesis and maturation in human vascular smooth muscle tissue derived from induced-pluripotent stem cells.

Obtaining vascular smooth muscle tissue with mature, functional elastic fibers is a key obstacle in tissue-engineered blood vessels. Poor elastin secretion and organization leads to a loss of specialization in contractile smooth muscle cells, resulting in over proliferation and graft failure. In this study, human induced-pluripotent stem cells (hiPSCs) were differentiated into early smooth muscle cells, seeded onto a hybrid poly(ethylene glycol) dimethacrylate/poly (l-lactide) (PEGdma-PLA) scaffold and cultured in a bioreactor while exposed to pulsatile flow, towards maturation into contractile smooth muscle tissue. We evaluated the effects of pulsatile flow on cellular organization as well as elastin expression and assembly in the engineered tissue compared to a static control through immunohistochemistry, gene expression and functionality assays. We show that culturing under pulsatile flow resulted in organized and functional hiPSC derived smooth muscle tissue. Immunohistochemistry analysis revealed hiPSC-smooth muscle tissue with robust, well-organized cells and elastic fibers and the supporting microfibril proteins necessary for elastic fiber assembly. Through qRT-PCR analysis, we found significantly increased expression of elastin, fibronectin, and collagen I, indicating the synthesis of necessary extracellular matrix components. Functionality assays revealed that hiPSC-smooth muscle tissue cultured in the bioreactor had an increased calcium signaling and contraction in response to a cholinergic agonist, significantly higher mature elastin content and improved mechanical properties in comparison to the static control. The findings presented here detail an effective approach to engineering elastic human vascular smooth muscle tissue with the functionality necessary for tissue engineering and regenerative medicine applications. STATEMENT OF SIGNIFICANCE: Obtaining robust, mature elastic fibers is a key obstacle in tissue-engineered blood vessels. Human induced-pluripotent stem cells have become of interest due to their ability to supplement tissue engineered scaffolds. Their ability to differentiate into cells of vascular lineages with defined phenotypes serves as a potential solution to a major cause of graft failure in which phenotypic shifts in smooth muscle cells lead to over proliferation and occlusion of the graft. Herein, we have differentiated human induced-pluripotent stem cells in a pulsatile flow bioreactor, resulting in vascular smooth muscle tissue with robust elastic fibers and enhanced functionality. This study highlights an effective approach to engineering elastic functional vascular smooth muscle tissue for tissue engineering and regenerative medicine applications.

Stem cell impregnated nanofiber stent sleeve for on-stent production and intravascular delivery of paracrine factors.

Stem cell therapies for atherosclerotic diseases are promising, but benefits remain modest with present cell delivery devices in part due to cell washout and immune attack. Many stem cell effects are believed mediated by paracrine factors (PFs) secreted by the stem cells which potentiate tissue repair via activation and enhancement of intrinsic host repair mechanisms We therefore sought to create an "intravascular paracrine factor factory" by harnessing stem cells on a stent using a nanofiber (NF) stent sleeve, and thus providing a sheltered milieu for cells to continuously produce PFs on-stent. The NF sleeve acts as a substrate on which stem cells grow, and as a semi-permeable barrier that protects cells from washout and host immune response while allowing free outward passage of PFs. NF stent sleeves were created by covering stents with electrospun poly-lactic-co-glycolic acid nanofibers and were then uniformly coated with mesenchymal stem cells (MSCs). NF sleeves blocked cell passage but did not hamper MSC attachment or proliferation, and did not alter MSC morphology or surface markers. NF sleeve MSCs continued to secrete PFs that were biologically active and successfully induced tubulogenesis in human endothelial cells. NF stent sleeves seeded with allogeneic MSCs implanted in pigs remained patent at 7 days without thrombotic occlusion or immune rejection. Our results demonstrate the feasibility of creating an intravascular PF factory using a stem cell impregnated NF stent sleeve, and pave the way for animal studies to assess the efficacy of local PF production to treat ischemic artery disease.