Polar Organic Charge-Transfer Complex of the Asymmetrical Component for Flexible Piezoelectric Energy Harvesting and Self-Powered Wearable Sensors.

Organic piezomaterials have attracted much attention because of their easy processing, lightweight, and mechanic flexibility properties. Developing new smart organic piezomaterials is highly required for new-generation electronic applications. Here, we found a novel organic piezomaterial of organic charge-transfer complex (CTC) consisting of dibenzcarbazole analogue (DBCz) and tetracyanoquinodimethane (TCNQ) in the molecular-level heterojunction stacking mode. The DBCz-TCNQ complex exhibited ferroelectric properties (the saturated polarization of ∼1.23 µC/cm2) at room temperature with a low coercive field. The noncentrosymmetric alignment (Pc space group) led to a spontaneous polarization of this architecture and thus was the origin of the piezoelectric behavior. Lateral piezoelectric nanogenerators (PENGs) based on the thermal evaporated CTC thin-film exhibited significant energy conversion behavior under mechanical agitation with a calculated piezoelectric coefficient (d31) of ∼33 pC/N. Furthermore, such a binary CTC thin-film constructed single-electrode PENG could show steady-state sensing performance to external stimuli as this flexible wearable device precisely detected physiological signals (e.g., finger bending, blink movement, carotid artery, etc.) with a self-powered supply. This work provides that the polar CTCs can act as efficient piezomaterials for flexible energy harvesting, conversion, and wearable sensing devices with a self-powered supply, enabling great potential in healthcare, motion detection, human-machine interfaces, etc.

Polarization-induced nanohelixes of organic cocrystals from asymmetric components with dopant-induced chirality inversion.

Supramolecular chirality is essential for the development of functional materials. In this study, we report the synthesis of twisted nanobelts based on charge-transfer (CT) complexes using self-assembly cocrystallization starting from asymmetric components. An asymmetric donor, DBCz, and a typical acceptor, tetracyanoquinodimethane, were used to construct a chiral crystal architecture. An asymmetric alignment of the donor molecules induced polar ±(102) facets that, accompanied with free-standing growth, resulted in a twisting along the b-axis due to the electrostatic repulsive interactions. Meanwhile, the alternately oriented ±(001) side-facets were responsible for the propensity of the helixes to be right-handed. Addition of a dopant significantly enhanced the twisting probability by reducing the surface tension and adhesion influence, even switching the chirality preference of the helixes. In addition, we could further extend the synthetic route to other CT systems for formation of other chiral micro/nanostructures. Our study offers a novel design approach for chiral organic micro/nanostructures for applications in optically active systems, micro/nano-mechanical systems and biosensing.

Energy Level, Crystal Morphology and Fluorescence Emission Tuning in Cocrystals via Molecular-Level Engineering.

Organic donor-acceptor complexes as new organic semiconductor class have attracted wide attention, due to their potential applications in functional optoelectronics. Herein, we present two new charge transfer cocrystals of di-cyanodiazafluorene -perylene (DCPE) and di-cyanodiazaflfluorene-pyrene (DCPY) through a rational cocrystal-engineering strategy. Although they are both 1 : 1 mixed stacking cocrystals with similar chemical structures, the DCPE cocrystal possesses a non-centrosymmetric space group and narrower band gap compared to DCPY cocrystal, because of the non-covalent bonding variation. The electrostatic potential accumulated in the lateral facets leads to highly twisted DCPE nanobelts, and the small band gap causes near infrared fluorescence. Meanwhile, the DCPY crystals with centrosymmetric space groups and weaker intermolecular interactions exhibited an untwisted morphology and red emission. This study will be helpful for the design and understanding of functional cocrystal materials that can be used in flexible micro/nano-mechanics, mechanical energy, and optical devices.

Relationship between the Geological Origins of Pore-Fracture and Methane Adsorption Behaviors in High-Rank Coal.

Coal is characterized by a complex pore-fracture network and functional groups, which are derived from various geological origins and which further affect methane adsorption. To explore the relationship between the geological origins of pore-fractures and methane adsorption behaviors, we conducted pore structure tests and adsorption isotherms on six Qinshui high-rank coals. The pores and fractures were observed using an optical microscope (OM), a field emission scanning electron microscope (FESEM), and a high-resolution transmission electron microscope (HRTEM), and the pore structure parameters were determined using mercury intrusion and low-pressure N2 and CO2 adsorption. High-pressure CH4 adsorption isotherms were obtained at 30 °C using the manometric method. Results show that the Qinshui high-rank coals develop five stages of pore size distribution, consisting of the smaller micropore stage (0.3-1 nm), the larger micropore and smaller mesopore stage (1-10 nm), the mesopore and smaller macropore stage (10-110 nm), the microfracture stage (0.11-40 µm), and the larger macropore stage (>40 µm). The micropores dominate the total pore volume (PV) and specific surface area (SSA). Pores and fractures of various morphologies and sizes have different geological origins, which are related to coalification and stress field evolution. Methane adsorption on coals mainly occurs in the micropores as a form of volume filling. The maximum pore size for complete gas filling (MPSCGF) ranges from 0.60 to 0.88 nm in Qinshui high-rank coals. The coal-forming geological processes, such as coalification and stress field evolution, contribute to various pores and fractures, which show different pore sizes and functional groups. The geological origins of pores and fractures control the methane adsorption behaviors in coals by way of the pore size and functional groups. Surface coverage-related methane adsorption behavior occurs in fractures, primary pores, and large-scale secondary pores, while micropore filling is the methane adsorption behavior in macromolecular pores and small-scale secondary pores. The aim of this study is to provide a new insight into the methane adsorption on coals from the geological process of the formation and modification of pores and fractures.

FPGA-Based Two-Dimensional Matched Filter Design for Vein Imaging Systems.

Venipuncture is a common medical procedure. The use of augmented reality-based assistive devices can improve the first puncture success rate in patients with poor vascular filling. In order to improve the image rendering quality and speed of auxiliary equipment, this study develop a two-dimensional matched filtering algorithm on a Field Programmable Gate Array (FPGA) in a near-infrared vein imaging system, which use parallel processing to offer real-time response and is designed as a small handheld portable device. A customized dorsal hand vein image library with 200 images captured from 120 participants is used to analyze the effects of convolution kernel parameters and exposure time on vascular imaging with different depths, and the correlation model between these parameters and vascular depth are constructed. We use the Tenengrad, variance, Laplace smoothness and standard deviation as evaluation indicators, and compare our algorithm with three other related studies. Experimental results show that the rendering quality of our proposed algorithm is significantly higher than other algorithms. In addition, the rendering speed of our algorithm can reach 66 fps, which is twice faster than the current fastest algorithm.

Four pairs of proline-containing cyclic dipeptides from Nocardiopsis sp. HT88, an endophytic bacterium of Mallotus nudiflorus L.

Strain HT88 was isolated from the fresh stems of Mallotus nudiflorus L, and it was identified as Nocardiopsis sp. by analyzing its morphology and the 16S rRNA sequence. The extracts of fermented HT88 showed potent antimicrobial activities. Bioassay guided separation of extracts led to eight proline (or hydroxyproline, Hyp)-containing cyclic dipeptides. Their structures were determined by 1D and 2D NMR spectroscopy and ESI mass spectrometry and further comparison with existing 1H and 13C NMR, melting points and specific rotation data. The eight 2,5-diketopiperazines (DKPs) were identified as cyclo(L-Pro-L-Leu) (1), cyclo(Pro-Leu) (2), cyclo(L-trans-Hyp-L-Leu) (3), cyclo(D-trans-Hyp-D-Leu) (4), and cyclo(D-Pro-L-Phe) (5), cyclo(L-Pro-L-Phe) (6), and cyclo(D-cis-Hyp-L-Phe) (7), cyclo(L-trans-Hyp-L-Phe) (8), respectively. Up to date, this is the first isolation of four pairs of proline based DKPs from Nocardiopsis sp.