Pd-Decorated Cu2O-Ag Catalyst Promoting CO2 Electroreduction to C2H4 by Optimizing CO Intermediate Adsorption and Hydrogenation.

Electrocatalytic CO2 reduction reaction (CO2RR) to high value-added products, such as ethylene (C2H4), offers a promising approach to achieve carbon neutrality. Although recent studies have reported that a tandem catalyst (for example, Cu-Ag systems) exhibits advantage in C2H4 production, its practical application is largely inhibited by the following: (1) a traditional tandem catalyst cannot effectively stabilize the *CO intermediate, resulting in sluggish C-C coupling, and (2) inadequate H2O activation ability hinders the hydrogenation of intermediates. To break through the above bottleneck, herein, palladium (Pd) was introduced into Cu2O-Ag, a typical conventional tandem catalyst, to construct a Cu2O-Pd-Ag ternary catalyst. Extensive experiment and density functional theory calculation prove that Pd can efficiently stabilize the *CO intermediate and promote the H2O activation, which contributes to the C-C coupling and intermediate hydrogenation, the key steps in the conversion of CO2 to C2H4. Beneficial to the efficient synergy of Cu2O, Pd, and Ag, the optimal Cu2O-Pd-Ag ternary catalyst achieves CO2RR toward C2H4 with a faradaic efficiency of 63.2% at -1.2 VRHE, which is higher than that achieved by Cu2O-Ag and most of other reported catalysts. This work is a fruitful exploration of a rare ternary catalyst, providing a new route for constructing an efficient CO2RR electrocatalyst.

Revealing the Lattice Carbonate Mediated Mechanism in Cu2(OH)2CO3 for Electrocatalytic Reduction of CO2 to C2H4.

Understanding the CO2 transformation mechanism on materials is essential for the design of efficient electrocatalysts for CO2 reduction. In aconventional adsorbate evolution mechanism (AEM), the catalysts encounter multiple high-energy barrier steps, especially CO2 activation, limiting the activity and selectivity. Here, lattice carbonate from Cu2(OH)2CO3 is revealed to be a mediator between CO2 molecules and catalyst during CO2 electroreduction by a 13C isotope labeling method, which can bypass the high energy barrier of CO2 activation and strongly enhance the performance. With the lattice carbonate mediated mechanism (LCMM), the Cu2(OH)2CO3 electrode exhibited ten-fold faradaic efficiency and 15-fold current density for ethylene production than the Cu2O electrode with AEM at a low overpotential. Theoretical calculations and in situ Raman spectroscopy results show that symmetric vibration of carbonate is precisely enhanced on the catalyst surface with LCMM, leading to faster electron transfer, and lower energy barriers of CO2 activation and carbon-carbon coupling. This work provides a route to develop efficient electrocatalysts for CO2 reduction based on lattice-mediated mechanism.

Unveiling pH-Dependent Adsorption Strength of *CO2 - Intermediate over High-Density Sn Single Atom Catalyst for Acidic CO2-to-HCOOH Electroreduction.

The acidic electrochemical CO2 reduction reaction (CO2RR) for direct formic acid (HCOOH) production holds promise in meeting the carbon-neutral target, yet its performance is hindered by the competing hydrogen evolution reaction (HER). Understanding the adsorption strength of the key intermediates in acidic electrolyte is indispensable to favor CO2RR over HER. In this work, high-density Sn single atom catalysts (SACs) were prepared and used as catalyst, to reveal the pH-dependent adsorption strength and coverage of *CO2 - intermediatethat enables enhanced acidic CO2RR towards direct HCOOH production. At pH=3, Sn SACs could deliver a high Faradaic efficiency (90.8 %) of HCOOH formation and a corresponding partial current density up to -178.5 mA cm-2. The detailed in situ attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopic studies reveal that a favorable alkaline microenvironment for CO2RR to HCOOH is formed near the surface of Sn SACs, even in the acidic electrolyte. More importantly, the pH-dependent adsorption strength of *CO2 - intermediate is unravelled over the Sn SACs, which in turn affects the competition between HER and CO2RR in acidic electrolyte.

Boosting the Electrochemical 5-Hydroxymethylfurfural Oxidation by Balancing the Competitive Adsorption of Organic and OH- over Controllable Reconstructed Ni3 S2 /NiOx.

The electrocatalytic oxidation of 5-hydroxymethylfurfural (HMF) is a promising method for the efficient production of biomass-derived high-value-added chemicals. However, its practical application is limited by: 1) the low activity and selectivity caused by the competitive adsorption of HMF and OH- and 2) the low operational stability caused by the uncontrollable reconstruction of the catalyst. To overcome these limitations, a series of Ni3 S2 /NiOx -n catalysts with controllable compositions and well-defined structures are synthesized using a novel in situ controlled surface reconstruction strategy. The adsorption behavior of HMF and OH- can be continuously adjusted by varying the ratio of NiOx to Ni3 S2 on the catalysts surface, as indicated by in situ characterizations, contact angle analysis, and theoretical simulations. Owing to the balanced competitive adsorption of HMF and OH- , the optimized Ni3 S2 /NiOx -15 catalyst exhibited remarkable HMF electrocatalytic oxidation performance, with the current density reaching 366 mA cm-2 at 1.5 VRHE and the Faradaic efficiency of the product, 2,5-furanedicarboxylic acid, reaching 98%. Moreover, Ni3 S2 /NiOx -15 exhibits excellent durability, with its activity and structure remaining stable for over 100 h of operation. This study provides a new route for the design and construction of catalysts for value-added biomass conversion and offers new insights into enhancing catalytic performance by balancing competitive adsorption.

Coupling Benzylamine Oxidation with CO2 Photoconversion to Ethanol over a Black Phosphorus and Bismuth Tungstate S-Scheme Heterojunction.

Photoconversion of CO2 and H2 O into ethanol is an ideal strategy to achieve carbon neutrality. However, the production of ethanol with high activity and selectivity is challenging owing to the less efficient reduction half-reaction involving multi-step proton-coupled electron transfer (PCET), a slow C-C coupling process, and sluggish water oxidation half-reaction. Herein, a two-dimensional/two-dimensional (2D/2D) S-scheme heterojunction consisting of black phosphorus and Bi2 WO6 (BP/BWO) was constructed for photocatalytic CO2 reduction coupling with benzylamine (BA) oxidation. The as-prepared BP/BWO catalyst exhibits a superior photocatalytic performance toward CO2 reduction, with a yield of 61.3 µmol g-1 h-1 for ethanol (selectivity of 91 %).In situ spectroscopic studies and theoretical calculations reveal that S-scheme heterojunction can effectively promote photogenerated carrier separation via the Bi-O-P bridge to accelerate the PCET process. Meanwhile, electron-rich BP acts as the active site and plays a vital role in the process of C-C coupling. In addition, the substitution of BA oxidation for H2 O oxidation can further enhance the photocatalytic performance of CO2 reduction to C2 H5 OH. This work opens a new horizon for exploring novel heterogeneous photocatalysts in CO2 photoconversion to C2 H5 OH based on cooperative photoredox systems.

Electron-Rich Bi Nanosheets Promote CO2 ⋠- Formation for High-Performance and pH-Universal Electrocatalytic CO2 Reduction.

Electrochemical CO2 reduction reaction (CO2 RR) to chemical fuels such as formate offers a promising pathway to carbon-neutral future, but its practical application is largely inhibited by the lack of effective activation of CO2 molecules and pH-universal feasibility. Here, we report an electronic structure manipulation strategy to electron-rich Bi nanosheets, where electrons transfer from Cu donor to Bi acceptor in bimetallic Cu-Bi, enabling CO2 RR towards formate with concurrent high activity, selectivity and stability in pH-universal (acidic, neutral and alkaline) electrolytes. Combined in situ Raman spectra and computational calculations unravel that electron-rich Bi promotes CO2 ⋅- formation to activate CO2 molecules, and enhance the adsorption strength of *OCHO intermediate with an up-shifted p-band center, thus leading to its superior activity and selectivity of formate. Further integration of the robust electron-rich Bi nanosheets into III-V-based photovoltaic solar cell results in an unassisted artificial leaf with a high solar-to-formate (STF) efficiency of 13.7 %.

Ultra-thin iron phosphate nanosheets for high efficient U(VI) adsorption.

In this study, the ultra-thin iron phosphate Fe7(PO4)6 nanosheets (FP1) with fine-controlled morphology, has been designed as a new two-dimensional (2D) material for uranium adsorption. Due to its unique high accessible 2D structure, atom-dispersed phosphate/iron anchor groups and high specific surface area (27.77 m2⋅g-1), FP1 shows an extreme-high U(VI) adsorption capacity (704.23 mg·g-1 at 298 K, pH = 5.0 ± 0.1), which is about 27 times of conventional 3D Fe7(PO4)6 (24.51 mg·g-1 -sample FP2) and higher than most 2D absorbent materials, showing a great value in the treatment of radioactive wastewater. According to the adsorption results, the sorption between U(VI) and FP1 is spontaneous and endothermic, and can be conformed to single molecular layer adsorption. Based on the analyses of FESEM, EDS, Mapping, FT-IR and XRD after adsorption, the possibile adsorption mechanism can be described as a Monolayer Surface Complexation and Stacking mode (MSCS-Mode). Additionally, the research not only provide a novel preparing method for 2D phosphate materials but also pave a new pathway to study other two-dimensional adsorption materials.