Impact of flaxseed gum on the aggregate structure, pasting properties, and rheological behavior of waxy rice starch.

This study examines the effects of flaxseed gum (FG) on the aggregate structure, pasting and rheological properties of waxy rice starch (WRS). Results display an increase in the ordered molecular structure (R1047/1024), relative crystallinity (RC), compactness (α), and microphase heterogeneity (ε, density degree of nanoaggregates, from 3.52 to 4.23) for WRS-FG complexes. These suggested FG facilitated the development of more organized molecular and crystalline structures of WRS, accompanied by the formation of ordered nanoaggregates with higher density (i.e., nano-aggregation structure). Also, FG addition resulted in the formation of enhanced gel network structure characterized by thicker layer walls and more uniform pores. These structural transformations contributed to a rise in gelatinization temperature (To, from 56.90 °C to 62.10 °C) and enthalpy (ΔH), as well as alterations in paste viscosities (PV, from 1285.00 mPa·s to 1734.00 mPa·s), and the rigidity of network structure (e.g., decreased loss tangent). These results indicate that FG could effectively regulate the techno-functional properties of WRS by rationally controlling the starch intrinsic structures of starch. And this study may improve the pasting and gelling properties of starch, thus driving the development of high-quality starchy foods and prolonging their shelf life, especially for glutinous rice flour products.

The Construction of Sodium Alginate/Carboxymethyl Chitosan Microcapsules as the Physical Barrier to Reduce Corn Starch Digestion.

To enhance the resistant starch (RS) content of corn starch, in this work, carboxymethyl chitosan/corn starch/sodium alginate microcapsules (CMCS/CS/SA) with varying concentrations of SA in a citric acid (CA) solution were designed. As the SA concentration increased from 0.5% to 2%, the swelling of the CMCS/CS/SA microcapsule decreased from 15.28 ± 0.21 g/g to 3.76 ± 0.66 g/g at 95 °C. Comparatively, the onset, peak, and conclusion temperatures (To, Tp, and Tc) of CMCS/CS/SA microcapsules were higher than those of unencapsulated CS, indicating that the dense network structure of microcapsules reduced the contact area between starch granules and water, thereby improving thermal stability. With increasing SA concentration, the intact and dense network of CMCS/CS/SA microcapsules remained less damaged after 120 min of digestion, suggesting that the microcapsules with a high SA concentration provided better protection to starch, thereby reducing amylase digestibility. Moreover, as the SA concentration increased from 0.5% to 2%, the RS content of the microcapsules during in vitro digestion rose from 42.37 ± 0.07% to 57.65 ± 0.45%, attributed to the blocking effect of the microcapsule shell on amylase activity. This study offers innovative insights and strategies to develop functional starch with glycemic control properties, holding significant scientific and practical value in preventing diseases associated with abnormal glucose metabolism.

Effect of curdlan addition and thermal sterilization on the structural and properties of rice starch gel.

This study delves into the effects of curdlan integration and thermal sterilization on the rheological properties, structure, and quality attributes of concentrated rice starch gel. Acting as a heat-set polysaccharide, curdlan established a dual-network gel structure with rice starch gel, displaying strong interactions with rice starch, as confirmed by confocal laser scanning microscopy and Fourier-transform infrared spectroscopy. The addition of curdlan expedited the gel formation of rice starch, yielding a denser gel structure. Consequently, this enhanced G', solid-like behavior, textural properties, and cooking quality while reducing frequency-dependence. Given the cooling-induced gelation behavior of pure rice starch, thermal treatment disrupted inter-chain hydrogen bonding, compromising the structural integrity of the gel. This disruption manifested in a softer texture and diminished mechanical properties and cooking quality. Notably, this decline in mechanical properties and cooking quality of rice starch gel was markedly ameliorated with the incorporation of curdlan, particularly at a content of ≥1.0 %. Compared with pure RS, 1.0 % CD inclusion showed a reduction in cooking breakage rate by 30.69 % and an increase in hardness by 38.04 %. This work provides valuable insights for the advancement of fresh starch gel-based foods that exhibit exceptional quality and an extended shelf life.

Natural polymer starch-based materials for flexible electronic sensor development: A review of recent progress.

In response to the burgeoning interest in the development of highly conformable and resilient flexible electronic sensors capable of transducing diverse physical stimuli, this review investigates the pivotal role of natural polymers, specifically those derived from starch, in crafting sustainable and biocompatible sensing materials. Expounding on cutting-edge research, the exploration delves into innovative strategies employed to leverage the distinctive attributes of starch in conjunction with other polymers for the fabrication of advanced sensors. The comprehensive discussion encompasses a spectrum of starch-based materials, spanning all-starch-based gels to starch-based soft composites, meticulously scrutinizing their applications in constructing resistive, capacitive, piezoelectric, and triboelectric sensors. These intricately designed sensors exhibit proficiency in detecting an array of stimuli, including strain, temperature, humidity, liquids, and enzymes, thereby playing a pivotal role in the continuous and non-invasive monitoring of human body motions, physiological signals, and environmental conditions. The review highlights the intricate interplay between material properties, sensor design, and sensing performance, emphasizing the unique advantages conferred by starch-based materials, such as self-adhesiveness, self-healability, and re-processibility facilitated by dynamic bonding. In conclusion, the paper outlines current challenges and future research opportunities in this evolving field, offering valuable insights for prospective investigations.

Chitosan-based electroconductive inks without chemical reaction for cost-effective and versatile 3D printing for electromagnetic interference (EMI) shielding and strain-sensing applications.

The burgeoning interest in biopolymer 3D printing arises from its capacity to meticulously engineer tailored, intricate structures, driven by the intrinsic benefits of biopolymers-renewability, chemical functionality, and biosafety. Nevertheless, the accessibility of economical and versatile 3D-printable biopolymer-based inks remains highly constrained. This study introduces an electroconductive ink for direct-ink-writing (DIW) 3D printing, distinguished by its straightforward preparation and commendable printability and material properties. The ink relies on chitosan as a binder, carbon fibers (CF) a low-cost electroactive filler, and silk fibroin (SF) a structural stabilizer. Freeform 3D printing manifests designated patterns of electroconductive strips embedded in an elastomer, actualizing effective strain sensors. The ink's high printability is demonstrated by printing complex geometries with porous, hollow, and overhanging structures without chemical or photoinitiated reactions or support baths. The composite is lightweight (density 0.29 ± 0.01 g/cm3), electroconductive (2.64 ± 0.06 S/cm), and inexpensive (20 USD/kg), with tensile strength of 20.77 ± 0.60 MPa and Young's modulus of 3.92 ± 0.06 GPa. 3D-printed structures exhibited outstanding electromagnetic interference (EMI) shielding effectiveness of 30-31 dB, with shielding of >99.9 % incident electromagnetic waves, showcasing significant electronic application potential. Thus, this study presents a novel, easily prepared, and highly effective biopolymer-based ink poised to advance the landscape of 3D printing technologies.

Purple rice starch in wheat: Effect on retrogradation dependent on addition amount.

While individual starch types may not possess the ideal gelatinization and retrogradation properties for specific applications, the amalgamation of multiple starch varieties might bestow desirable physicochemical properties upon resulting starch-based products. This study explored the impact of incorporating purple rice starch (PRS), as a novel starch variant (up to 15 % PRS), on the gelatinization and retrogradation (within 14 days) of regular wheat starch (WS). Rheological and texture assessments demonstrated that the introduction of PRS diminished the viscoelasticity and hardness of fresh WS paste. Additionally, in the case of retrograded WS pastes stored at 4 °C for 1-14 days, the incorporation of 10 % or 15 % PRS effectively retarded the reduction in transparency and significantly reduced hardness, retrogradation degree, the ratio of absorbance at 1047/1017 cm-1, and relative crystallinity. Notably, 10 % PRS results in a more pronounced effect. Conversely, 5 % PRS induced an opposing impact on retrograded WS post-storage. Moreover, scanning electron microscopy revealed that as the proportion of PRS increased, the microstructure of gelatinized WS-PRS closely resembled that of pure PRS. In conclusion, the diverse effects of varying PRS proportions on WS alter the texture and characteristics of starch-based foods, underscoring the potential of starch blending for improved applications.

Polysaccharide-dextrin thickened fluids for individuals with dysphagia: recent advances in flow behaviors and swallowing assessment methods.

The global aging population has brought about a pressing health concern: dysphagia. To effectively address this issue, we must develop specialized diets, such as thickened fluids made with polysaccharide-dextrin (e.g., water, milk, juices, and soups), which are crucial for managing swallowing-related problems like aspiration and choking for people with dysphagia. Understanding the flow behaviors of these thickened fluids is paramount, and it enables us to establish methods for evaluating their suitability for individuals with dysphagia. This review focuses on the shear and extensional flow properties (e.g., viscosity, yield stress, and viscoelasticity) and tribology (e.g., coefficient of friction) of polysaccharide-dextrin-based thickened fluids and highlights how dextrin inclusion influences fluid flow behaviors considering molecular interactions and chain dynamics. The flow behaviors can be integrated into the development of diverse evaluation methods that assess aspects such as flow velocity, risk of aspiration, and remaining fluid volume. In this context, the key in-vivo (e.g., clinical examination and animal model), in-vitro (e.g., the Cambridge Throat), and in-silico (e.g., Hamiltonian moving particles semi-implicit) evaluation methods are summarized. In addition, we explore the potential for establishing realistic assessment methods to evaluate the swallowing performance of thickened fluids, offering promising prospects for the future.

Insights into the hierarchical structure and physicochemical properties of starch isolated from fermented dough.

Understanding the hierarchical structure and physicochemical properties of starch isolated from fermented dough with different times (0-120 min) is valuable for improving the quality of fermented dough-based products. The results indicate that fermentation disrupted the starch granule surface and decreased the average particle size from 19.72 µm to 18.45 µm. Short-term fermentation (< 60 min) disrupted the crystalline, lamellar, short-range ordered molecular and helical structures of starch, while long-term fermentation (60-120 min) elevated the ordered degree of these structures. For example, relative crystallinity and double helix contents increased from 23.7 % to 26.8 % and 34.4 % to 37.2 %, respectively. During short-term fermentation, the structural amorphization facilitated interactions between starch molecular chains and water molecules, which increased the peak viscosity from 275.4 to 320.6 mPa·s and the swelling power from 7.99 to 8.52 g/g. In contrast, starches extracted from long-term fermented dough displayed the opposite results. Interestingly, the hardness and springiness of starch gels gradually decreased as fermentation time increased. These findings extend our understanding of the starch structure-property relationship during varied fermentation stages, potentially benefiting the production of better-fermented foods.

Dissolution and regeneration of starch in hydroxyl-functionalized ionic liquid aqueous solution.

There have been continuous quests for suitable solvents for starch, given the importance of effective starch dissolution in its modification and subsequent materials production. In light of this, the potential of hydroxyl-functionalized ionic liquid (IL) as a promising solvent for starch was investigated. Within this study, a hydroxyl-functionalized IL 1-(2,3-dihydroxypropyl)-3-methylimidazole chloride ([Dhpmim][Cl]) was synthesized, and the dissolution of starch in this IL and its aqueous solutions was examined. Starch (5.35 wt%) was completely dissolved in [Dhpmim][Cl] within 2 h at 100 °C. The solubility of starch in [Dhpmim][Cl]-water mixtures initially increased and then decreased with rising water content. The optimal ratio was found to be 1:9 (wt/wt) water:[Dhpmim][Cl], achieving the highest solubility at 9.28 wt%. Density functional theory (DFT) simulations elucidated the possible interactions between starch and solvents. After dissolution and regeneration in the 1:9 water:[Dhpmim][Cl] mixture, starch showed no discernible change in the molecular structure, with no derivatization reaction observed. Regenerated starch exhibited a transformation in crystalline structure from A-type to V-type, and its relative crystallinity (12.4 %) was lower than that of native starch (25.2 %), resulting in decreased thermal stability. This study suggests that the hydroxyl-functionalized IL, [Dhpmim][Cl], and its aqueous solutions serve as effective solvents for starch dissolution.

Effect of soybean polysaccharide and soybean oil on gelatinization and retrogradation properties of corn starch.

This investigation stems from the wide interest in mitigating starch retrogradation, which profoundly impacts the quality of starch-based food, garnering significant attention in the contemporary food industry. Our study delves into the intricate dynamics of soluble soybean polysaccharide (SSPS) and soybean oil (SO) when added individually or in combination to native corn starch (NCS), offering insights into the gelatinization and retrogradation phenomena. We observed that SSPS (0.5 %, w/w) hindered starch swelling, leading to an elevated gelatinization enthalpy change (∆H) value, while SO (0.5 %, w/w) increased ∆H due to its hydrophobicity. Adding SSPS and/or SO concurrently reduced the viscosity and storage modulus (G') of starch matrix. For the starch gel (8 %, w/v) after refrigeration, SSPS magnified water-holding capacity (WHC) and decreased hardness through hydrogen bonding with starch, while SO increased hardness with limited water retention. Crucially, the combination of SSPS and SO maximized WHC, minimized hardness, and significantly inhibited starch retrogradation. The specific ratio of SSPS to SO was found to significantly influence the starch properties, with a 1:1 ratio resulting in the most desirable quality for application in starch-based foods. This study offers insights for utilizing polysaccharides and lipids in starch-based food products to extend shelf life.

Facile superhydrophobic modification on HPMC film using polydimethylsiloxane and starch granule coatings.

The excessive water sensitivity of hydroxypropyl methylcellulose (HPMC) films prevent them from being used extensively. In order to overcome this limitation, superhydrophobic HPMC films were meticulously crafted through the utilization of a composite of polydimethylsiloxane (PDMS) and ball-milled rice starch, corn starch, or potato starch (RS/CS/PS) for the coating process. Initially possessing hydrophilic properties, the HPMC Film (CA = 49.3 ± 1.8°) underwent a transformative hydrophobic conversion upon the application of PDMS, resulting in a static contact angle measuring up to 103.4 ± 2.0°. Notably, the synergistic combination of PDMS-coated HPMC with ball-milled starch demonstrated exceptional superhydrophobic attributes. Particularly, the treated HPMC-based film, specifically the HP-CS-2 h film, showcased an impressive contact angle of 170.5° alongside a minimal sliding angle of 5.2°. The impact of diverse starch types and the ball milling treatment on the PDMS/starch coatings and HPMC film was thoroughly examined using scanning electron microscopy (SEM), wide-angle X-ray diffraction (WAXS), and particle size analysis. These studies demonstrated that the low surface energy and roughness required for the creation of superhydrophobic HPMC-based films were imparted by the hierarchical structure formed by the application of PDMS/ball-milled starch. CHEMICAL COMPOUNDS STUDIED IN THIS ARTICLE: Polydimethylsiloxane (PubChem CID: 24764); Hydroxypropyl methylcellulose (PubChem CID: 671); Ethyl acetate (PubChem CID: 8857).

Towards superior biopolymer gels by enabling interpenetrating network structures: A review on types, applications, and gelation strategies.

Gels derived from single networks of natural polymers (biopolymers) typically exhibit limited physical properties and thus have seen constrained applications in areas like food and medicine. In contrast, gels founded on a synergy of multiple biopolymers, specifically polysaccharides and proteins, with intricate interpenetrating polymer network (IPN) structures, represent a promising avenue for the creation of novel gel materials with significantly enhanced properties and combined advantages. This review begins with the scrutiny of newly devised IPN gels formed through a medley of polysaccharides and/or proteins, alongside an introduction of their practical applications in the realm of food, medicine, and environmentally friendly solutions. Finally, based on the fact that the IPN gelation process and mechanism are driven by different inducing factors entwined with a diverse amalgamation of polysaccharides and proteins, our survey underscores the potency of physical, chemical, and enzymatic triggers in orchestrating the construction of crosslinked networks within these biomacromolecules. In these mixed systems, each specific inducer aligns with distinct polysaccharides and proteins, culminating in the generation of semi-IPN or fully-IPN gels through the intricate interpenetration between single networks and polymer chains or between two networks, respectively. The resultant IPN gels stand as paragons of excellence, characterized by their homogeneity, dense network structures, superior textural properties (e.g., hardness, elasticity, adhesion, cohesion, and chewability), outstanding water-holding capacity, and heightened thermal stability, along with guaranteed biosafety (e.g., nontoxicity and biocompatibility) and biodegradability. Therefore, a judicious selection of polymer combinations allows for the development of IPN gels with customized functional properties, adept at meeting precise application requirements.

Combined effect of heat moisture and ultrasound treatment on the physicochemical, thermal and structural properties of new variety of purple rice starch.

The advantages of physically modifying starch are evident: minimal environmental impact, no by-products, and straightforward control. The impact of dual modification on starch properties is contingent upon modification conditions and starch type. Herein, we subjected purple rice starch (PRS) to heat-moisture treatment (HMT, 110 °C, 4 h) with varying moisture content, ultrasound treatment (UT, 50 Hz, 30 min) with different ultrasonic power, and a combination of HMT and UT. Our findings reveal that UT following HMT dispersed starch granules initially aggregated by HMT and resulted in a rougher granule surface. Rheological analysis showcased a synergistic effect of HMT and UT, enhancing the fluidity of PRS and reinforcing its resistance to deformation in paste form. The absorbance ratio R1047/1015 indicates that increased moisture content during HMT and high ultrasound power for UT reduced the short-range order degree (1.69). However, the combined HMT-UT exhibited an increased R1047/1015 (1.38-1.64) compared to HMT alone (1.29-1.45), likely due to short-chain rearrangement. Notably, the A-type structure of PRS remained unaltered, but overall crystallinity significantly decreased (23.01 %-28.56 %), consistent with DSC results. In summary, physical modifications exerted significant effects on PRS, shedding light on the mechanisms governing the transformation of structural properties during HMT-UT.

Pre-gelatinized high-amylose starch enables easy preparation of flexible and antimicrobial composite films for fresh fruit preservation.

While high-amylose starch (HAS) possesses advantageous properties such as high resistant starch content and favorable mechanical attributes, its gelatinization constraints have limited its applicability. This study enhances its versatility by focusing on pre-gelatinized (PG) HAS with exceptional rehydratability, achieved by disorganizing native HAS granules (with amylose contents of 55 % and 68 %, respectively) using a 33 % CaCl2 solution, followed by water-ethanol precipitation and freeze-drying. The resulting PG-HAS exhibited elevated amylose content (61 % and 75 %) with minimal changes in amylose molecular weight. PG-HAS displayed superior water-absorption index (WAI) and water-soluble index (WSI) compared to native HAS, further improved by 2 % CaCl2 solution incorporation. Furthermore, composite films were prepared by mixing PG-HAS with PVA at a 6:4 (w/w) ratio. The PG-G50 (61 % amylose content)/PVA composite film exhibited remarkable elongation (131.1 ± 5.4 %), nearly three times that of a normal corn starch (NCS, with 27 % amylose)/PVA film, attributed to improved starch dispersity and higher amylose content. Nonetheless, the PG-G70 (75 % amylose content)/PVA film at the same ratio showed lower elongation (54.7 ± 8.0 %), potentially due to strong cohesive forces between amylose chains that impede starch-PVA interactions. Moreover, the PG-HAS/PVA composite films, enriched with antibacterial agents, demonstrated effective antibacterial properties with a gradual and sustained release of active compounds. Notably, the PG-G50/PVA/tannic acid (TA) film effectively preserved fresh apple slices by inhibiting bacteria growth and preventing browning. These findings underscore the excellent rehydration of PG-HAS and its potential as an inner packaging material for irregularly shaped foods, such as sliced fruits or meats, due to its nontoxic nature, softness and flexibility, which allows the film to maintain close contact with food surfaces.

On the investigation of composite cooling/heating set gel systems based on rice starch and curdlan.

In pursuit of advancing the understanding of composite gel systems, this study delves into the intricate realm of rheology, structural elucidation, and mechanical attributes. Specifically, it scrutinizes the symbiotic interplay between rice starch, a cooling-set gel, and curdlan, a thermo-irreversible heating-set gel. A higher curdlan content enhances the inter-chain hydrogen bonding between rice starch and curdlan, resulting in a denser gel structure and thus increased moduli, solid-like behavior, and mechanical properties, and reduced frequency-dependence, especially at high temperatures (>65 °C). For example, with 50 % curdlan incorporation, G' (90 °C) improved by 252 %. Notably, thermal treatment can compromise the structural integrity of the rice starch gel, reducing strength and softening texture. However, this textural degradation can be effectively mitigated with, for example, 30 % curdlan incorporation, resulting in a 55-fold hardness increase at 85 °C. The knowledge gained from this work offers valuable guidance for tailoring starch-based gel products to specific properties.

Mastering textural control in multi-polysaccharide gels: Effect of κ-carrageenan, konjac glucomannan, locust bean gum, low-acyl gellan gum, and sodium alginate.

To comprehend the intricate interplay of five common food polysaccharides, κ-Carrageenan (KC), konjac glucomannan (KGM), locust bean gum (LBG), low-acyl gellan gum (LAG), and sodium alginate (SA), within composite polysaccharide gels, widely employed for textural modulation and flavor enhancement. This study systematically modulates the quantities of these five polysaccharides to yield six distinct multi-polysaccharide gels. The unique impact of each polysaccharide on the overall quality of composite gels were studied by thermostability, microstructure, water-holding capacity (WHC), texture, and sensory attributes. The findings unequivocally manifest the phenomenon of thermoreversible gelation in all composite gels, except for the KC-devoid sample, which displayed an inability to solidify. Notably, KGM, LBG, and LAG emerged as pivotal enhancers of the network structure in these composite gels, while SA was identified as a promotor of layered structure, resulting in a reduction of surface hardness. Leveraging principal component analysis (PCA) to analyzed 14 critical evaluation parameters of the five multi-polysaccharide gels, revealing the order as follows: KC > KGM > SA > LAG > LBG. These findings would imparts valuable insights into the pragmatic utilization of multi-polysaccharide gels for the development of food products (e.g. Bobo balls in milk tea) with tailored textural and sensory attributes.

Fabrication and characterization of complex coacervates utilizing gelatin and carboxymethyl starch.

BACKGROUND: Modified polysaccharides have greatly expanded applications in comparison with native polysaccharides due to their improved compatibility and interactions with proteins and active compounds in food-related areas. Nonetheless, there is a noticeable dearth of research concerning the utilization of carboxymethyl starch (CMS) as a microcapsule wall material in food processing, despite its common use in pharmaceutical delivery. The development of an economical and safe embedding carrier using CMS and gelatin (GE) holds immense importance within the food-processing industry. In this work, the potential of innovative coacervates formed by the combination of GE and CMS as a reliable, stable, and biodegradable embedding carrier is evaluated by turbidity measurements, thermogravimetric analysis (TGA), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and rheological measurements. RESULTS: The results indicate that GE-CMS coacervates primarily resulted from electrostatic interactions and hydrogen bonding. The optimal coacervation was observed at pH 4.6 and with a GE/CMS blend ratio of 3:1 (w/w). However, the addition of NaCl reduced coacervation and made it less sensitive to temperature changes (35-55 °C). In comparison with individual GE or CMS, the coacervates exhibited higher thermal stability, as shown by TGA. X-ray diffraction analysis shows that the GE-CMS coacervates maintained an amorphous structure. Rheological testing reveals that the GE-CMS coacervates exhibited shear-thinning behavior and gel-like properties. CONCLUSION: Overall, attaining electroneutrality in the mixture boosts the formation of a denser structure and enhances rheological properties, leading to promising applications in food, biomaterials, cosmetics, and pharmaceutical products. © 2023 Society of Chemical Industry.

Advances in the application of functional nanomaterial and cold plasma for the fresh-keeping active packaging of meat.

The most recent advancements in food science and technology include cold sterilization of food and fresh-keeping packaging. Active packaging technology has received much interest due to the photocatalytic activity (PCA) of functional nanoparticles, including titanium dioxide (TiO2) and ferric oxide (Fe2O3). However, there are still significant concerns about the toxicity and safety of these functional nanoparticles. This review emphasizes the bacteriostatic and fresh-keeping properties of functional nanoparticles as well as their packaging strategies using the ultraviolet photo-catalysis effect. High-voltage electric field cold plasma (HVEF-CP) is the most innovative method of cold-sterilizing food. HVEF-CP sterilizes by producing photoelectrons, ions, and active free radicals on food media, which come into contact with the bacteria's surface and destroy their cells. Next, this review also assesses the photocatalytic activity and bacteriostasis kinetics of nanosized TiO2 and Fe2O3 in poultry, beef, and lamb. In addition, this review also emphasizes the importance of exploiting the complex interaction processes between TiO2 and Fe2O3, along with dietary components and their utilization in the fresh meat industry.

Adhesive and Flame-Retardant Properties of Starch/Ca2+ Gels with Different Amylose Contents.

Starch, being renewable and biodegradable, is a viable resource for developing sustainable and environmentally friendly materials. The potential of starch/Ca2+ gels based on waxy corn starch (WCS), normal corn starch (NCS), and two high-amylose corn starches, G50 (55% amylose content) and G70 (68% amylose content) as flame-retardant adhesives has been explored. Being stored at 57% relative humidity (RH) for up to 30 days, the G50/Ca2+ and G70/Ca2+ gels were stable without water absorption or retrogradation. The starch gels with increasing amylose content displayed increased cohesion, as reflected by significantly higher tensile strength and fracture energy. All the four starch-based gels showed good adhesive properties on corrugated paper. For wooden boards, because of the slow diffusion of the gels, the adhesive abilities are weak initially but improve with storage extension. After storage, the adhesive abilities of the starch-based gels are essentially unchanged except for G70/Ca2+, which peels from a wood surface. Moreover, all the starch/Ca2+ gels exhibited excellent flame retardancy with limiting oxygen index (LOI) values all around 60. A facile method for the preparation of starch-based flame-retardant adhesives simply by gelating starch with a CaCl2 solution, which can be used in paper or wood products, has been demonstrated.

Legume protein/polysaccharide food hydrogels: Preparation methods, improvement strategies and applications.

For the development of innovative foods and nutritional fortification, research into food gel is essential. As two types of rich natural gel material, both legume proteins and polysaccharides have high nutritional value and excellent application potential, attracting wide attention worldwide. Research has focused on combining legume proteins with polysaccharides to form hybrid hydrogels as their combinations show improved texture and water retention compared to single legume protein or single polysaccharide gels, and these properties can be tailored for specific applications. This article reviews hydrogels of common legume proteins and discusses heat induction, pH induction, salt ion induction, and enzyme-induced assembly of legume protein/polysaccharide mixtures. The applications of these hydrogels in fat replacement, satiety enhancement, and delivery of bioactive ingredients are discussed. Challenges for future work are also highlighted.