RESUMO
The mass transport and ion conductivity in the catalyst layer are important for fuel cell performances. Here, we report an in situ-grown ultrathin catalyst layer (UTCL) to reduce the oxygen mass transport and a surface ionomer-coated gas diffusion layer method to reduce the ion conducting resistance. A significantly reduced catalyst layer thickness (ca. 1 µm) is achieved, and coupled with the ionomer introduction method, the ultrathin catalyst layer is in good contact with the membrane, resulting in high ion conductivity and high Pt utilization. This ultrathin catalyst layer is suitable for both proton exchange membrane fuel cells and anion exchange membrane fuel cells, giving peak power densities of 2.24 and 1.11 W cm-2, respectively, which represent an increase of more than 30% compared with the membrane electrode assembly (MEA) fabricated by using traditional Pt/C power catalysts. Electrochemical impedance spectra and limiting current tests demonstrate the reduced charge transfer, mass transfer, and ohmic resistances in the ultrathin catalyst layer membrane electrode assembly, resulting in the promoted fuel cell performances.
RESUMO
Virus particle (VP) quantification plays a pivotal role in the development of production processes of VPs for virus-based therapies. The yield based on total VP count serves as a process performance indicator for evaluating process efficiency and consistency. Here, a label-free particle quantification method for enveloped VPs was developed, with potential applications in oncolytic virotherapy, vaccine development, and gene therapy. The method comprises size-exclusion chromatography (SEC) separation using high-performance liquid chromatography (HPLC) instruments. Ultraviolet (UV) was used for particle quantification and multi-angle light scattering (MALS) for particle characterization. Consistent recoveries of over 97% in the SEC were achieved upon mobile phase screenings and addition of bovine serum albumin (BSA) as sample stabilizer. A calibration curve was generated, and the method's performance and applicability to in-process samples were characterized. The assay's repeatability variation was <1% and its intermediate precision variation was <3%. The linear range of the method spans from 7.08 × 108 to 1.72 × 1011 VP/mL, with a limit of detection (LOD) of 7.72 × 107 VP/mL and a lower limit of quantification (LLOQ) of 4.20 × 108 VP/mL. The method, characterized by its high precision, requires minimal hands-on time and provides same-day results, making it efficient for process development.
RESUMO
Viral replication places oncolytic viruses (OVs) in a unique niche in the field of drug pharmacokinetics (PK) as their self-amplification obscures exposure-response relationships. Moreover, standard bioanalytical techniques are unable to distinguish the input from replicated drug products. Here, we combine two novel approaches to characterize PK and biodistribution (BD) after systemic administration of vesicular stomatitis virus pseudotyped with lymphocytic choriomeningitis virus glycoprotein (VSV-GP) in healthy mice. First: to decouple input drug PK/BD versus replication PK/BD, we developed and fully characterized a replication-incompetent tool virus that retained all other critical attributes of the drug. We used this approach to quantify replication in blood and tissues and to determine its impact on PK and BD. Second: to discriminate the genomic and antigenomic viral RNA strands contributing to replication dynamics in tissues, we developed an in situ hybridization method using strand-specific probes and assessed their spatiotemporal distribution in tissues. This latter approach demonstrated that distribution, transcription, and replication localized to tissue-resident macrophages, indicating their role in PK and BD. Ultimately, our study results in a refined PK/BD profile for a replicating OV, new proposed PK parameters, and deeper understanding of OV PK/BD using unique approaches that could be applied to other replicating vectors.
RESUMO
Purification of viruses, especially for therapeutic purposes, is a tedious and challenging task. The challenges arise due to the size and surface complexity of the virus particles. VSV-GP is a promising oncolytic virus, which has been approved for phase I clinical trials by the Food and Drug Administration (FDA) of United States and Paul Ehrlich Institute (PEI) of Germany. The virus particles of VSV-GP are larger in size than vectors commonly used for gene therapy (e.g., adenovirus, adeno-associated virus, etc.). The current established proprietary clinical-grade manufacturing process for the purification of VSV-GP encompasses several chromatographic and non-chromatographic steps. In this study, we describe a new single-step purification process for the purification of VSV-GP virus, using cation exchange convective flow column with relatively higher yields. The purified virus was characterized for its quality attributes using TCID50 assay (for viral infectivity), host cell protein contaminant ELISA, SDS-PAGE, size exclusion chromatography (SEC), and cryo-electron microscopy. Furthermore, the purified viral therapeutic material was tested in vivo for its efficacy and safety. All these characterization methods demonstrated a therapeutic virus preparation of high purity and yield, which can be readily used for various studies.
RESUMO
A methodology for deconvolution of fast exchange equilibrium states in NMR spectroscopy (DFEQNMR) was developed based on DFT-GIAO NMR chemical shift prediction and a probability theory algorithm. Proof-of-concept studies were performed to estimate the protonation state of N-containing organic molecules involving fast proton exchange equilibrium and evaluate the solution tautomerism of a purine derivative. DFT-GIAO calculations were optimized to achieve good accuracy in 13C, 1H and 15N chemical shift prediction for protonated species. The probability theory algorithm enabled the determination of solution species ratios and yielded 95% confidence regions by comparing experimental and simulated chemical shift data sets. The calculation showed good accuracy for model partial salts with various functionalities and application in structure elucidation of complex natural product partial salts was also demonstrated. This method showed promising potential in acquisition of important insight into fast exchange equilibrium systems with only one experimental NMR chemical shift data set.
RESUMO
NMR chemical shift prediction at the B3LYP/cc-pVDZ level of theory was used to develop a highly accurate probability theory algorithm for the determination of the stereochemistry of diastereomers as well as the regiochemistry. DFT-GIAO calculations were performed for each conformer using geometry optimization and a CPCM solvent model. Boltzmann averaged shielding constants were converted to chemical shifts for 1H and 13C, using the generalized linear scaling terms determined in four different solvents for 1H and 13C and extended to 15N in DMSO. The probability theory algorithm, D iCE, was based on the DP4 method and developed for 1H, 13C, and 15N NMR using individual and combined probability data. The chemical shift calculation errors were fitted to a Student's t-distribution for 1H and 13C and a normal distribution for 15N. The application yielded a high accuracy for structural assignment with a low computational cost.
RESUMO
As part of a program to design small molecules that bind proteins, we require cyclic peptides (or peptidomimetics) that are severely constrained such that they adopt one predominant conformation in solution. This paper describes syntheses of the 13-membered cyclic tetrapeptides 1 containing aminopyrrolidine carboxyl (APC) residues. A linear precursor was prepared and used to determine optimal conditions for cyclization of that substrate. A special linker was prepared to enable cyclization of similar linear peptidomimetics on a solid phase, and the solution-phase cyclization conditions were shown to be appropriate for this too. Stereochemical variations were then used to determine the ideal APC configuration for cyclization of the linear precursors (on a solid phase, using the conditions identified previously). Consequently, a series of compounds were prepared that are representative of compounds 1. Conformational studies of representative compounds in DMSO solution were performed primarily using (i) NOE studies, (ii) quenched molecular dynamics simulations using no constraints from experiment, and (iii) MacroModel calculations with NMR constraints. All three strategies converged to the same conclusion: the backbone of molecules based on 1 tends to adopt one preferential conformation in solution and that conformation can be predicted from the stereochemistries of the α-amino acids involved.
Assuntos
Ácidos Carboxílicos/química , Peptídeos Cíclicos/química , Peptidomiméticos/química , Pirrolidinas/química , Ácidos Carboxílicos/síntese química , Conformação Molecular , Simulação de Dinâmica Molecular , Peptídeos Cíclicos/síntese química , Peptidomiméticos/síntese química , Pirrolidinas/síntese química , EstereoisomerismoRESUMO
An accurate and efficient procedure was developed for performing 13C NMR chemical shift calculations employing density functional theory with the gauge invariant atomic orbitals (DFT-GIAO). Benchmarking analysis was carried out, incorporating several density functionals and basis sets commonly used for prediction of 13C NMR chemical shifts, from which the B3LYP/cc-pVDZ level of theory was found to provide accurate results at low computational cost. Statistical analyses from a large data set of 13C NMR chemical shifts in DMSO are presented with TMS as the calculated reference and with empirical scaling parameters obtained from a linear regression analysis. Systematic errors were observed locally for key functional groups and carbon types, and correction factors were determined. The application of this process and associated correction factors enabled assignment of the correct structures of therapeutically relevant compounds in cases where experimental data yielded inconclusive or ambiguous results. Overall, the use of B3LYP/cc-pVDZ with linear scaling and correction terms affords a powerful and efficient tool for structure elucidation.
RESUMO
The calculation of 15N NMR chemical shifts has been systematically investigated using density functional theory-gauge including/invariant atomic orbitals (DFT-GIAO) approximation at the B3LYP/cc-pVDZ level of theory. General linear regression terms for 15N chemical shift predictions were calculated for nitromethane and liquid ammonia references in DMSO. Both aliphatic and aromatic nitrogens were studied using a diverse set of molecular scaffolds. Statistical error analysis between experiment and prediction revealed that, with the exception of primary amines, 95% of linear scaled N-15 chemical shifts are within a ±9.56 ppm range. Comparison of the 15N calculated isotropic chemical shifts with the experimentally determined chemical shifts provided accurate assignment of the correct structure in cases where experimental data was ambiguous or inconclusive. Application of 15N prediction proved to be highly effective in identifying the correct regio-isomer, oxidation state, protonation state and preferred tautomer in solution.
Assuntos
Óxidos/química , Teoria Quântica , Espectroscopia de Ressonância Magnética/normas , Isótopos de Nitrogênio , Prótons , Padrões de Referência , EstereoisomerismoRESUMO
This study features solid phase syntheses of cyclic tetrapeptides containing anthranilic acid (Anth) on relatively inexpensive resins derived from polystyrene. It proved to be difficult to hydrolyze a supported Anth-methyl ester unless a phase transfer catalyst was added to facilitate transport of hydroxide into the swollen hydrophobic gel state of the resin. We suggest this may be an under-appreciated strategy for improving syntheses on polystyrene supports.
RESUMO
Each amino acid in a peptide contributes three atom units to main-chains, hence natural cyclic peptides can be 9, 12, 15, . i.e. 3n membered-rings, where n is the number of amino acids. Cyclic peptides that are 9 or 12-membered ring compounds tend to be hard to prepare because of strain, while their one amino acid homologs (15-membered cyclic pentapeptides) are not conformationally homogeneous unless constrained by strategically placed proline or d-amino acid residues. We hypothesized that replacing one genetically encoded amino acid in a cyclic tetrapeptide with a rigid ß-amino acid would render peptidomimetic designs that rest at a useful crossroads between synthetic accessibility and conformational rigidity. Thus this research explored non-proline containing 13-membered ring peptides 1 featuring one anthranilic acid (Anth) residue. Twelve cyclic peptides of this type were prepared, and in doing so the viability of both solution- and solid-phase methods was demonstrated. The library produced contained a complete set of four diastereoisomers of the sequence 1aaf (i.e. cyclo-AlaAlaPheAnth). Without exception, these four diastereoisomers each adopted one predominant conformation in solution; basically these conformations feature amide N-H vectors puckering above and below the equatorial plane, and approximately oriented their N-H[combining low line] atoms towards the polar axis. Moreover, the shapes of these conformers varied in a logical and predictable way (NOE, temperature coefficient, D/H exchange, circular dichroism). Comparisons were made of the side-chain orientations presented by compounds 1aaa in solution with ideal secondary structures and protein-protein interaction interfaces. Various 1aaa stereoisomers in solution present side-chains in similar orientations to regular and inverse γ-turns, and to the most common ß-turns (types I and II). Consistent with this, compounds 1aaa have a tendency to mimic various turns and bends at protein-protein interfaces. Finally, proteolytic- and hydrolytic stabilities of the compounds at different pHs indicate they are robust relative to related linear peptides, and rates of permeability through an artificial membrane indicate their structures are conducive to cell permeability.
Assuntos
Oligopeptídeos/química , Oligopeptídeos/síntese química , Peptídeos Cíclicos/química , Peptídeos Cíclicos/síntese química , ortoaminobenzoatos/química , Permeabilidade da Membrana Celular , Técnicas de Química Sintética , Oligopeptídeos/metabolismo , Peptídeos Cíclicos/metabolismo , Peptidomiméticos/química , Peptidomiméticos/metabolismo , Conformação ProteicaRESUMO
This study features aza-BODIPY (BF2-chelated azadipyrromethene) dyes with two aromatic substituents linked by oligoethylene glycol fragments to increase hydrophilicity of aza-BODIPY for applications in intracellular imaging. To prepare these, two chalcones were attached α,ω onto oligoethylene glycol fragments, then reacted with nitromethane anion. Conjugate addition products from this reaction were then subjected to typical conditions for synthesis of aza-BODIPY dyes (NH4OAc, (n)BuOH, 120 °C); formation of boracycles in this reaction was concomitant with creation of macrocycles containing the oligoethylene glycol fragments. Similar dyes with acyclic oligoelythene glycol substituents in the same position were used to compare the efficiencies of the intra- and inter-molecular aza-BODIPY forming reactions, and the characteristics of the products. All the fluors with oligoethylene glycol fragments, i.e. cyclic or acyclic, localized in the endoplasmic reticulum of a fibroblast cell line (WEHI-13VAR), the human pancreatic cancer cell line (PANC-1, rough ER predominates) and human liver cancer cell line (HepG2, smooth ER prevalent). These fluors are potentially useful for near IR (λmax emis at 730 nm) ER staining probes.
Assuntos
Compostos Aza/química , Compostos de Boro/química , Retículo Endoplasmático/metabolismo , Corantes Fluorescentes/química , Polietilenoglicóis/química , Compostos de Boro/síntese química , Linhagem Celular , Elétrons , Corantes Fluorescentes/síntese química , Humanos , Conformação Molecular , Polietilenoglicóis/síntese química , Teoria Quântica , Espectroscopia de Luz Próxima ao Infravermelho , TermodinâmicaRESUMO
Minimalist structures, H and I, were designed as protein interface mimics. Attributes of these chemotypes are (i) greater rigidity than conventional peptides, (ii) chiral and nonplanar heterocyclic backbones that are less prone to the hydrophobic aggregation effects, and (iii) potential to be prepared with a variety of side chains corresponding to natural amino acids. Intermediates, however, in the oligo(pyrrolidinone-piperidine)s H syntheses were vulnerable to epimerization. The origins of this epimerization were determined, then the study was focused on oligo(piperidinone-piperidine) compounds I. Mimics I were prepared via iterative couplings; a penta(piperidinone-piperidine) was prepared in this way. A series of lower homologues of this pentamer were crystallized and studied (single crystal X-ray), and four of them were used in a circular dichroism (CD) study. Thus, an estimate of 36 Å for the N-to-C distance of a typical conformation of the penta(piperidinone-piperidine) was made. CD spectra of four progressively longer oligomers allowed assignment of elipticity changes around 300 nm that can be attributed to increased conformational ordering of the longer oligomers in solution.
Assuntos
Piperidinas/química , Estrutura Molecular , Piperidinas/síntese química , Ligação ProteicaRESUMO
Representative minimalist mimics 1 were prepared from amino acids. Scaffold 1 was not designed to mimic any particular secondary structure, but simulated accessible conformations of this material were compared with common ideal secondary structures and with >125,000 different protein-protein interaction (PPI) interfaces. This data mining exercise indicates that scaffolds 1 can mimic features of sheet-turn-sheets, somewhat fewer helical motifs, and numerous PPI interface regions that do not resemble any particular secondary structure.
Assuntos
Oxazóis/química , Piperidonas/química , Proteínas/química , Aminoácidos/química , Cristalografia por Raios X , Mimetismo Molecular , Estrutura Molecular , Conformação Proteica , Estrutura Secundária de Proteína , Proteínas/metabolismoRESUMO
Small molecule probes for perturbing protein-protein interactions (PPIs) in vitro can be useful if they cause the target proteins to undergo biomedically relevant changes to their tertiary and quaternary structures. Application of the Exploring Key Orientations (EKO) strategy (J. Am. Chem. Soc., 2013, 135, 167 - 173) to a piperidinone-piperidine chemotype 1 indicated specific derivatives were candidates to perturb a protein-protein interface in the α-antithrombin dimer; those particular derivatives of 1 were prepared and tested. In the event, most of them significantly accelerated oligomerization of monomeric α-antithrombin, which is metastable in its oligomeric state. This assertion is supported by data from gel electrophoresis (non-denaturing PAGE; throughout) and probe-induced loss of α-antithrombin's inhibitor activity in a reaction catalyzed by thrombin. Kinetics of α-antithrombin oligomerization induced by the target compounds were examined. It was found that probes with O-benzyl-protected serine side-chains are the most active catalysts in the series, and reasons for this, based on modeling experiments, are proposed. Overall, this study reveals one of the first examples of small molecules designed to act at a protein-protein interface relevant to oligomerization of a serpin (ie α-antithrombin). The relevance of this to formation of oligomeric serpin fibrils, associated with the disease states known as "serpinopathies", is discussed.
RESUMO
Conditions were developed for syntheses of ß-enamino esters, thioesters, and amides. These reactions involve hydroxybenzotriazole derivatives in buffered media. Illustrative syntheses of some heterocyclic systems are given, including some related to protein-protein interface mimics.
Assuntos
Amidas/síntese química , Compostos de Enxofre/síntese química , Triazóis/química , Amidas/química , Catálise , Ésteres , Estrutura Molecular , Estereoisomerismo , Compostos de Enxofre/químicaRESUMO
Minimalist secondary structure mimics are typically made to resemble one interface in a protein-protein interaction (PPI), and thus perturb it. We recently proposed suitable chemotypes can be matched with interface regions directly, without regard for secondary structures. Here we describe a modular synthesis of a new chemotype 1, simulation of its solution-state conformational ensemble, and correlation of that with ideal secondary structures and real interface regions in PPIs. Scaffold 1 presents amino acid side-chains that are quite separated from each other, in orientations that closely resemble ideal sheet or helical structures, similar non-ideal structures at PPI interfaces, and regions of other PPI interfaces where the mimic conformation does not resemble any secondary structure. 68 different PPIs where conformations of 1 matched well were identified. A new method is also presented to determine the relevance of a minimalist mimic crystal structure to its solution conformations. Thus DLD-1 faf crystallized in a conformation that is estimated to be 0.91â kcal mol(-1) above the minimum energy solution state.
Assuntos
Piperidinas/química , Estrutura Secundária de Proteína/fisiologia , Aminoácidos , Modelos Moleculares , Conformação Molecular , Ligação ProteicaRESUMO
Peptide mimics that display amino acid side-chains on semi-rigid scaffolds (not peptide polyamides) can be referred to as minimalist mimics. Accessible conformations of these scaffolds may overlay with secondary structures giving, for example, "minimalist helical mimics". It is difficult for researchers who want to apply minimalist mimics to decide which one to use because there is no widely accepted protocol for calibrating how closely these compounds mimic secondary structures. Moreover, it is also difficult for potential practitioners to evaluate which ideal minimalist helical mimics are preferred for a particular set of side-chains. For instance, what mimic presents i, i + 4, i + 7 side-chains in orientations that best resemble an ideal α-helix, and is a different mimic required for a i, i + 3, i + 7 helical combination? This article describes a protocol for fitting each member of an array of accessible scaffold conformations on secondary structures. The protocol involves: (i) use quenched molecular dynamics (QMD) to generate an ensemble consisting of hundreds of accessible, low energy conformers of the mimics; (ii) representation of each of these as a set of Cα and Cß coordinates corresponding to three amino acid side-chains displayed by the scaffolds; (iii) similar representation of each combination of three side-chains in each ideal secondary structure as a set of Cα and Cß coordinates corresponding to three amino acid side-chains displayed by the scaffolds; and, (iv) overlay Cα and Cß coordinates of all the conformers on all the sets of side-chain "triads" in the ideal secondary structures and express the goodness of fit in terms of root mean squared deviation (RMSD, Å) for each overlay. We refer to this process as Exploring Key Orientations on Secondary structures (EKOS). Application of this procedure reveals the relative bias of a scaffold to overlay on different secondary structures, the "side-chain correspondences" (e.g. i, i + 4, i + 7 or i, i + 3, i + 4) of those overlays, and the energy of this state relative to the minimum located. This protocol was tested on some of the most widely cited minimalist α-helical mimics (1-8 in the text). The data obtained indicates several of these compounds preferentially exist in conformations that resemble other secondary structures as well as α-helices, and many of the α-helical conformations have unexpected side-chain correspondences. These observations imply the featured minimalist mimics have more scope for disrupting PPI interfaces than previously anticipated. Finally, the same simulation method was used to match preferred conformations of minimalist mimics with actual protein/peptide structures at interfaces providing quantitative comparisons of predicted fits of the test mimics at protein-protein interaction sites.
Assuntos
Mimetismo Molecular , Estrutura Secundária de ProteínaRESUMO
Oligo-pyrrolinone-pyrrolidines (generic structure 1) have the potential to interfere with protein-protein interactions (PPIs), but to reduce this to practice it is necessary to be able to synthesize these structures with a variety of different side chains corresponding to genetically encoded proteins. This paper describes expansion of the synthetic scope of 1, the difficulties encountered in this process, particularly issues with epimerization and slow coupling rates, and methods to overcome them. Finally, spectroscopic and physicochemical properties as well as proteolytic stabilities of molecules in this series were measured; these data highlight the suitability of oligo-pyrrolinone-pyrrolidines for the development of pharmacological probes or pharmaceutical leads.