In-Depth Insight into Corrosion Inhibition Performance of Sweet Potato Leaf Extract as a Green and Efficient Inhibitor for 6N01 Al Alloy in the Seawater: Experimental and Theoretical Perspectives.

Corrosion protection of metal has become an important and urgent topic, which requires the development of an inexpensive, environmentally friendly, and highly efficient corrosion inhibitor. Herein, a sweet potato leaf extract (SPL) was obtained by a simple water-based extraction method and then as a green corrosion inhibitor for 6N01 Al alloy in the seawater was well investigated by the weight loss method and various electrochemical tests. Fourier transform infrared (FT-IR) and ultraviolet-visible (UV-vis) spectroscopies were carried out to investigate the compositions of SPL. The findings from the potentiodynamic polarization (PDP) curves suggest that SPL functions as a typical mixed-type corrosion inhibitor. Notably, the maximum corrosion inhibition efficiency reaches 94.6% following a 36 h immersion period at 25 °C. The adsorption behavior of SPL on the Al alloy surface belongs to the Langmuir adsorption isotherm. The Gibbs free energy value illustrates that the adsorption of SPL contains both physisorption and chemisorption. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) indicate that SPL is firmly attached to the Al alloy surface by making a protective layer, which can effectively inhibit the corrosion of the Al alloy in the seawater. Furthermore, quantum chemical calculations were applied to validate the chemical adsorption and elucidate the relationship between the electronic structure of the active components in SPL and their effectiveness in corrosion inhibition.

Zwitterion modified chitosan as a high-performance corrosion inhibitor for mild steel in hydrochloric acid solution.

Herein, a novel chitosan Schiff base (CS-FGA) as a sustainable corrosion inhibitor has been successfully synthesized via a simple amidation reaction by using an imidazolium zwitterion and chitosan (CS). The corrosion inhibition property of CS-FGA for mild steel (MS) in a 1.0 M HCl solution was studied by various electrochemical tests and physical characterization methods. The findings indicate that the maximum inhibition efficiency of CS-FGA as a mixed-type inhibitor for MS in 1.0 M HCl solution with 400 mg L-1 reaches 97.6 %, much much higher than the CS and the recently reported chitosan-based inhibitors. Scanning electron microscopy (SEM), atomic force microscopy (AFM), and water contact angle (WCA) results reveal that the CS-FGA molecules firmly adsorb on the MS surface to form a protective layer. The adsorption of CS-FGA on the MS surface belongs to the Langmuir adsorption isotherm containing both the physisorption and chemisorption. According to the X-ray photoelectron spectroscopy (XPS) and UV-vis spectrum, FeN bonds presented on the MS surface further prove the chemisorption between CS-FGA and Fe to generate the stable protective layer. Additionally, theoretical calculations from quantum chemical calculation (DFT) and molecular simulations (MD) were performed to reveal the inhibition mechanism of CS-FGA.

Stabilizing Mechanisms in Patients Treated Using Hill-Sachs Remplissage With Bankart Repair in Abduction-External Rotation Position.

BACKGROUND: Hill-Sachs lesion (HSL) remplissage with Bankart repair (RMBR) provides a minimally invasive solution for treating HSLs and glenoid bone defects of <25%. The infraspinatus tendon is inserted into the HSL during the remplissage process, causing the infraspinatus to shift medially, leading to an unknown effect on glenohumeral alignment during the resting abduction-external rotation (ABER) and muscle-active states. PURPOSE/HYPOTHESIS: The purpose of this study was to evaluate the possible check-rein effect and muscle-active control in stabilizing the glenohumeral joint after RMBR in vivo. We hypothesized that the check-rein effect and active control would stabilize the glenohumeral joint in the ABER position in patients after RMBR. STUDY DESIGN: Controlled laboratory study. METHODS: We included 42 participants-22 patients in group A who met the inclusion criteria after RMBR and 20 healthy participants in group B without shoulder laxity. Three-dimensional magnetic resonance imaging was performed to analyze the alignment relationship of the glenohumeral joint with and without muscular activity. Ultrasonic shear wave elastography was used to evaluate the elastic properties of the anterior capsule covered with the anterior bands of the inferior glenohumeral ligament. RESULTS: Patients who underwent RMBR demonstrated more posterior (-1.81 ± 1.19 mm vs -0.76 ± 1.25 mm; P = .008) and inferior (-1.05 ± 0.62 mm vs -0.45 ± 0.48 mm; P = .001) shifts of the humeral head rotation center and less anterior capsular elasticity (70.07 ± 22.60 kPa vs 84.01 ± 14.08 kPa; P = .023) than healthy participants in the resting ABER state. More posterior (-3.17 ± 0.84 mm vs -1.81 ± 1.19 mm; P < .001) and less-inferior (-0.34 ± 0.56 mm vs -1.05 ± 0.62 mm; P < .001) shifts of the humeral head rotation center and less anterior capsular elasticity (36.57 ± 13.89 kPa vs 70.07 ± 22.60 kPa; P < .001) were observed in the operative shoulder during muscle-active ABER than in resting ABER states. CONCLUSION: The check-rein effect and muscle-active control act as stabilizing mechanisms in RMBR during the ABER position. CLINICAL RELEVANCE: Stabilizing mechanisms in RMBR during the ABER position include the check-rein effect and muscle-active control.

[Study on the evaluation of glenoid bone defects by MRI three-dimensional reconstruction].

Objective: To investigate the feasibility of MRI three-dimensional (3D) reconstruction model in quantifying glenoid bone defect by comparing with CT 3D reconstruction model measurement. Methods: Forty patients with shoulder anterior dislocation who met the selection criteria between December 2021 and December 2022 were admitted as study participants. There were 34 males and 6 females with an average age of 24.8 years (range, 19-32 years). The injury caused by sports injury in 29 cases and collision injury in 6 cases, and 5 cases had no obvious inducement. The time from injury to admission ranged from 4 to 72 months (mean, 28.5 months). CT and MRI were performed on the patients' shoulder joints, and a semi-automatic segmentation of the images was done with 3D slicer software to construct a glenoid model. The length of the glenoid bone defect was measured on the models by 2 physicians. The intra-group correlation coefficient ( ICC) was used to evaluate the consistency between the 2 physicians, and Bland-Altman plots were constructed to evaluate the consistency between the 2 methods. Results: The length of the glenoid bone defects measured on MRI 3D reconstruction model was (3.83±1.36) mm/4.00 (0.58, 6.13) mm for physician 1 and (3.91±1.20) mm/3.86 (1.39, 5.96) mm for physician 2. The length of the glenoid bone defects measured on CT 3D reconstruction model was (3.81±1.38) mm/3.80 (0.60, 6.02) mm for physician 1 and (3.99±1.19) mm/4.00 (1.68, 6.38) mm for physician 2. ICC and Bland-Altman plot analysis showed good consistency. The ICC between the 2 physicians based on MRI and CT 3D reconstruction model measurements were 0.73 [95% CI (0.54, 0.85)] and 0.80 [95% CI (0.65, 0.89)], respectively. The 95% CI of the difference between the two measurements of physicians 1 and 2 were (-0.46, 0.49) and (-0.68, 0.53), respectively. Conclusion: The measurement of glenoid bone defect based on MRI 3D reconstruction model is consistent with that based on CT 3D reconstruction model. MRI can be used instead of CT to measure glenoid bone defects in clinic, and the soft tissue of shoulder joint can be observed comprehensively while reducing radiation.

Dopamine modified natural glucomannan as a highly efficient inhibitor for mild steel: Experimental and theoretical methods.

In this work, Glucomannan was modified with dopamine to synthesize a new polysaccharide Schiff base (GAD). After confirmation of GAD by NMR and FT-IR spectroscopic methods, it was introduced as a sustainable corrosion inhibitor with excellent anti-corrosion action for mild steel in 0.5 M hydrochloric acid (HCl) solution. Employing electrochemical test, morphology measurement, and theoretical analysis, the anticorrosion performance of GAD on mild steel in 0.5 M HCl solution is determined. Maximum efficiency of GAD for suppressing the corrosion rate of mild steel at 0.12 g L-1 reaches 99.0 %. After immersion in HCl solution for 24 h, the results from scanning electron microscopy indicate that GAD is firmly attached to the mild steel surface by making a protective layer. According to the X-ray photoelectron spectroscopy (XPS), FeN bonds existed on the steel surface indicate the presence of chemisorption between GAD and Fe to form stable complexes attracted to the active position on the mild steel. The effects of Schiff base groups on the corrosion inhibition efficiencies were also investigated. Moreover, the inhibition mechanism of GAD was further illustrated by the free Gibbs energy, quantum chemical calculation and molecular dynamics simulation.

Numerical Analysis of the Forming Mechanism of Exit Burrs in Metal Milling under Ice Boundary Constraint.

In metal processing, exit burrs are usually inevitable, which is a huge challenge for high-precision manufacturing. This paper innovatively proposes an ice boundary constraint (IBC) method to actively suppress exit burrs to obtain better workpiece edge quality. Firstly, the formation mechanism of the exits burr is analyzed from the perspective of material flow at the edge of the workpiece, and the principle of the IBC method is explained. Secondly, a finite element model (FEM) is established to analyze the stress distribution and flow at the edge of the workpiece, so as to reveal the suppression mechanism of IBC on the exit burrs. Finally, the feasibility of IBC method and the validity of FEM are verified by the milling experiments. The experimental results show that the IBC method can reduce the exit burr height by 51.4% on average, and FEM can effectively predict the height of the exit burr. The IBC method proposed in this study can provide some reference and guidance for the active suppression of exit burrs in industry.

Identification and characterization of tsyl1, a thermosensitive chlorophyll-deficient mutant in rice (Oryza sativa).

Chloroplast development and chlorophyll biosynthesis are affected by temperature. However, the underlying molecular mechanism of this phenomenon remains elusive. Here, we isolated and characterized a thermosensitive yellow-green leaf mutant named tsyl1 (thermosensitive yellow leaf 1) from an ethylmethylsulfone (EMS)-mutagenized pool of rice. The mutant exhibits a yellow-green leaf phenotype and decreased leaf chlorophyll contents throughout development. At the mature stage of the tsyl1 mutant, the plant height, tiller number, number of spikelets per panicle and 1000 seed weight were decreased significantly compared to those of wild-type plants, but the seed setting rate and panicle length were not. The mutant phenotype was controlled by a single recessive nuclear gene on the short arm of rice chromosome 11. Map-based cloning of TSYL1, followed by a complementation experiment, showed a G base deletion at the coding region of LOC_Os11g05552, leading to the yellow-green phenotype. The TSYL1 gene encodes a signal recognition particle 54 kDa (SRP54) protein that is conserved in all organisms. The expression of tsyl1 was induced by high temperature. Furthermore, the expression of chlorophyll biosynthesis- and chloroplast development-related genes was influenced in tsyl1 at different temperatures. These results indicated that the TSYL1 gene plays a key role in chlorophyll biosynthesis and is affected by temperature at the transcriptional level.

Knowledge Domain and Hotspots Predict Concerning Electroactive Biomaterials Applied in Tissue Engineering: A Bibliometric and Visualized Analysis From 2011 to 2021.

Objective: Electroactive biomaterials used in tissue engineering have been extensively studied. Electroactive biomaterials have unique potential advantages in cell culture and tissue regeneration, which have attracted the attention of medical researchers worldwide. Therefore, it is important to understand the global scientific output regarding this topic. An analysis of publications on electroactive biomaterials used in tissue engineering over the past decade was performed, and the results were summarised to track the current hotspots and highlight future directions. Methods: Globally relevant publications on electroactive biomaterials used in tissue engineering between 2011 and 2021 were extracted from the Web of Science database. The VOSviewer software and CiteSpace were employed to visualise and predict trends in research on the topic. Results: A total of 3,374 publications were screened. China contributed the largest number of publications (995) and citations (1581.95, actual value ×0.05). The United States achieved the highest H-index (440 actual values ×0.05). The journal Materials Science & Engineering C-materials for Biological Applications (IF = 7.328) published the most studies on this topic (150). The Chinese Academy of Science had the largest number of publications (107) among all institutions. The publication titled Nanotechnological strategies for engineering complex tissues by Dir, T of the United States had the highest citation frequency (985 times). Regarding the function of electroactive materials, the keyword "sensors" emerged in recent years. Regarding the characterisation of electroactive materials, the keyword "water contact angle" appeared lately. Regarding electroactive materials in nerve and cardiac tissue engineering, the keywords "silk fibroin and conductive hydrogel" appeared recently. Regarding the application of electroactive materials in bone tissue engineering, the keyword "angiogenesis" emerged in recent years. The current research trend indicates that although new functional materials are constantly being developed, attention should also be paid to their application and transformation in tissue engineering. Conclusion: The number of publications on electroactive biomaterials used in tissue engineering is expected to increase in the future. Topics like sensors, water contact angle, angiogenesis, silk fibroin, and conductive hydrogels are expected to be the focuses of research in the future; attention should also be paid to the application and transformation of electroactive materials, particularly bone tissue engineering. Moreover, further development of the field requires joint efforts from all disciplines.

A spatio-temporal continuous soil moisture dataset over the Tibet Plateau from 2002 to 2015.

Surface soil moisture is a key variable in the exchange of water and energy between the land surface and the atmosphere, and critical to meteorology, hydrology, and ecology. The Tibetan Plateau (TP), known as "The third pole of the world" and "Asia's water towers", exerts huge influences on and sensitive to global climates. In this situation, longer time series of soil moisture can provide sufficient information to understand the role of the TP. This paper presents the first comprehensive dataset (2002-2015) of spatio-temporal continuous soil moisture at 0.25° resolution, based on satellite-based optical (i.e. MODIS) and microwave (ECV) products using a machine learning method named general regression neural network (GRNN). The dataset itself reveals significant information on the soil moisture and its changes over the TP, and can aid to understand the potential driven mechanisms for climate change over the TP.

OsbZIP81, A Homologue of Arabidopsis VIP1, May Positively Regulate JA Levels by Directly Targetting the Genes in JA Signaling and Metabolism Pathway in Rice.

Rice (Oryza sativa L.) is one of the most important food crops in the world. In plants, jasmonic acid (JA) plays essential roles in response to biotic and abiotic stresses. As one of the largest transcription factors (TFs), basic region/leucine zipper motif (bZIP) TFs play pivotal roles through the whole life of plant growth. However, the relationship between JA and bZIP TFs were rarely reported, especially in rice. In this study, we found two rice homologues of Arabidopsis VIP1 (VirE2-interacting protein 1), OsbZIP81, and OsbZIP84. OsbZIP81 has at least two alternative transcripts, OsbZIP81.1 and OsbZIP81.2. OsbZIP81.1 and OsbZIP84 are typical bZIP TFs, while OsbZIP81.2 is not. OsbZIP81.1 can directly bind OsPIOX and activate its expression. In OsbZIP81.1 overexpression transgenic rice plant, JA (Jasmonic Acid) and SA (Salicylic acid) were up-regulated, while ABA (Abscisic acid) was down-regulated. Moreover, Agrobacterium, Methyl Jasmonic Acid (MeJA), and PEG6000 can largely induce OsbZIP81. Based on ChIP-Seq and Random DNA Binding Selection Assay (RDSA), we identified a novel cis-element OVRE (Oryza VIP1 response element). Combining ChIP-Seq and RNA-Seq, we obtained 1332 targeted genes that were categorized in biotic and abiotic responses, including α-linolenic acid metabolism and fatty acid degradation. Together, these results suggest that OsbZIP81 may positively regulate JA levels by directly targeting the genes in JA signaling and metabolism pathway in rice.

The rice "fruit-weight 2.2-like" gene family member OsFWL4 is involved in the translocation of cadmium from roots to shoots.

MAIN CONCLUSION: Heterogeneous expression of the rice genes "fruit-weight 2.2-like" (OsFWL) affects Cd resistance in yeast, and OsFWL4 mediates the translocation of Cd from roots to shoots. Cadmium (Cd) induces chronic and toxic effects in humans. In a previous study (Xu et al. in Planta 238:643-655, 2013), we cloned the rice genes, designated OsFWL1-8, homologous to the tomato fruit-weight 2.2. Here, we show that expression of genes OsFWL3-7 in yeast confers resistance to Cd. The Cd contents of OsFWL3-, -4-, -6- and -7-transformed Cd(II)-sensitive yeast mutant ycf1 cells were strongly decreased compared with those of empty vector, with the strongest resistance to Cd observed in cells expressing OsFWL4. Evaluation of truncated and site-directed mutation derivatives revealed that the CCXXG motifs near the second transmembrane region of OsFWL4 are involved in Cd resistance in yeast. Real-time PCR analysis showed that OsFWL4 expression was induced by CdCl2 stress in rice seedlings. Compared with WT plants, the Cd contents in the shoots of RNAi mediated OsFWL4 knockdown plants were significantly decreased, and Cd translocation from roots to shoots was reduced. According to bimolecular fluorescence complementation, yeast two-hybrid and Western-blotting assays, the OsFWL4 protein forms homo-oligomers. These results suggest that OsFWL4 might act directly as a transporter and is involved in the translocation of Cd from roots to shoots in rice.

Anti-fatigue activity of polysaccharide fractions from Lepidium meyenii Walp. (maca).

The two fractions of polysaccharide MPS-1 and MPS-2 were extracted from Lepidium meyenii Walp. (maca) by water, and purified using a DEAE-52 and a Sephadex G-100 column. The molecular weight (MW) of MPS-1 was 7.6kDa, and the MW of MPS-2 was 6.7kDa. The MPS-1 was composed of xylose, arabinose, galactose and glucose, with the mole ratio 1:1.7:3.3:30.5; the MPS-2 was composed of arabinose, galactose and glucose, with the mole ratio 1:1.3:36.8. The IR spectrum implied that only α-pyranose existed in MPS-1, and both α-pyranose and ß-pyranose existed in MPS-2. The anti-fatigue activities of MPS-1 and MPS-2 were measured by the forced swimming test, along with the determination of blood lactate (BLA), urea nitrogen (BUN), lactic dehydrogenase (LDH) activity and liver glycogen (LG). The results indicated that both MPS-1 and MPS-2 presented dose-dependently positive effects on the fatigue related parameters. Additionally, MPS-2 has a better anti-fatigue effect than MPS-1.

Ternary Organic Solar Cells Based on Two Compatible Nonfullerene Acceptors with Power Conversion Efficiency >10.

Two different nonfullerene acceptors and one copolymer are used to fabricate ternary organic solar cells (OSCs). The two acceptors show unique interactions that reduce crystallinity and form a homogeneous mixed phase in the blend film, leading to a high efficiency of ≈10.3%, the highest performance reported for nonfullerene ternary blends. This work provides a new approach to fabricate high-performance OSCs.

Transformation of rice with large maize genomic DNA fragments containing high content repetitive sequences.

KEY MESSAGE: Large and complex maize BIBAC inserts, even with a length of about 164 kb and repeat sequences of 88.1%, were transferred into rice. The BIBAC vector has been established to clone large DNA fragments and directly transfer them into plants. Previously, we have constructed a maize B73 BIBAC library and demonstrated that the BIBAC clones were stable in Agrobacterium. In this study, we demonstrated that the maize BIBAC clones could be used for rice genetic transformation through Agrobacterium-mediated method, although the average transformation efficiency for the BIBAC clones (0.86%) is much lower than that for generally used binary vectors containing small DNA fragments (15.24%). The 164-kb B73 genomic DNA insert of the BIBAC clone B2-6 containing five maize gene models and 88.1% of repetitive sequences was transferred into rice. In 18.75% (3/16) of the T1, 13.79% (4/29) of the T2, and 5.26% (1/19) of the T3 generation transgenic rice plants positive for the GUS and HYG marker genes, all the five maize genes can be detected. To our knowledge, this is the largest and highest content of repeat sequence-containing DNA fragment that was successfully transferred into plants. Gene expression analysis (RT-PCR) showed that the expression of three out of five genes could be detected in the leaves of the transgenic rice plants. Our study showed a potential to massively use maize genome resource for rice breeding by mass transformation of rice with large maize genomic DNA fragment BIBAC clones.

Is Sex Like Driving? HIV Prevention and Risk Compensation.

Risk compensation has been called the "Achilles' heel" of HIV prevention policies (Cassell et al 2006). This paper examines the behavioral response to male circumcision, a major HIV prevention policy currently being implemented throughout much of Sub-Saharan Africa. Contrary to the presumption of risk compensation, we find that the response due to the perceived reduction in HIV transmission appears to have been a reduction in risky sexual behavior. We suggest a mechanism for this finding: circumcision may reduce fatalism about acquiring HIV/AIDS and increase the salience of the tradeoff between engaging in additional risky behavior and avoiding acquiring HIV. We also find what appears to be a competing effect that does not operate through the circumcision recipient's belief about the reduction in the risk of acquiring HIV.

Genomic resources for gene discovery, functional genome annotation, and evolutionary studies of maize and its close relatives.

Maize is one of the most important food crops and a key model for genetics and developmental biology. A genetically anchored and high-quality draft genome sequence of maize inbred B73 has been obtained to serve as a reference sequence. To facilitate evolutionary studies in maize and its close relatives, much like the Oryza Map Alignment Project (OMAP) (www.OMAP.org) bacterial artificial chromosome (BAC) resource did for the rice community, we constructed BAC libraries for maize inbred lines Zheng58, Chang7-2, and Mo17 and maize wild relatives Zea mays ssp. parviglumis and Tripsacum dactyloides. Furthermore, to extend functional genomic studies to maize and sorghum, we also constructed binary BAC (BIBAC) libraries for the maize inbred B73 and the sorghum landrace Nengsi-1. The BAC/BIBAC vectors facilitate transfer of large intact DNA inserts from BAC clones to the BIBAC vector and functional complementation of large DNA fragments. These seven Zea Map Alignment Project (ZMAP) BAC/BIBAC libraries have average insert sizes ranging from 92 to 148 kb, organellar DNA from 0.17 to 2.3%, empty vector rates between 0.35 and 5.56%, and genome equivalents of 4.7- to 8.4-fold. The usefulness of the Parviglumis and Tripsacum BAC libraries was demonstrated by mapping clones to the reference genome. Novel genes and alleles present in these ZMAP libraries can now be used for functional complementation studies and positional or homology-based cloning of genes for translational genomics.

Molecular characterization and functional analysis of "fruit-weight 2.2-like" gene family in rice.

Tomato fruit-weight 2.2 (FW2.2) was reported to control up to 30 % fruit weight. Recent studies demonstrated that FW2.2-like (FWL) genes also play important roles in plant growth and development. For instance, a maize homolog of FW2.2, named cell number regulator 1 (CNR1), negatively regulates plant and organ size. However, FWL genes in rice have not been characterized yet. In this study, eight FWL genes were identified in rice genome and designated as OsFWL1-8. The chromosome location, gene structure, protein motif, and phylogenetic relationship of OsFWL genes were analyzed. RT-PCR result and microarray data revealed that OsFWL genes exhibited diverse expression patterns and the detailed expression patterns of OsFWL5, 6, and 7 negatively correlated with leaf growth activity. Rice protoplast transient transformation experiment showed that most OsFWL proteins locate at cell membrane but OsFWL8 is present in the nucleus. In addition, the functions of OsFWL genes were investigated by analyzing two T-DNA insertion lines for OsFWL3 and 5. Compared with wild type, the grain weight of osfwl3 mutant and the plant height of osfwl5 mutant were increased by 5.3 and 12.5 %, respectively. We also found that the increase in grain length of osfwl3 mutant was due chiefly to incremental cell number, not cell size and the expression of OsFWL3 negatively correlated with glume growth activity. These results provide a comprehensive foundation for further study of OsFWL functions in rice.