Discovery of petroselinic acid with in vitro and in vivo antifungal activity by targeting fructose-1,6-bisphosphate aldolase.

BACKGROUND: The incidence of invasive fungal diseases (IFDs), represented by Candida albicans infection, is increasing year by year. However, clinically available antifungal drugs are very limited and encounter challenges such as limited efficacy, drug resistance, high toxicity, and exorbitant cost. Therefore, there is an urgent need for new antifungal drugs. PURPOSE: This study aims to find new antifungal compounds from plants, preferably those with good activity and low toxicity, and reveal their antifungal targets. METHODS: In vitro antifungal activities of compounds were investigated using broth microdilution method, spot assay, hyphal growth assay and biofilm formation assay. Synergistic effects were assessed using broth microdilution checkerboard technique. In vivo antifungal activities were evaluated using Galleria mellonella and murine candidiasis models. Cytotoxicity of compounds was investigated using Cell Counting Kit-8 (CCK-8). Discovery and validation of antifungal targets of compounds were conducted by using monoallelic knockout library of C. albicans, haploinsufficiency profiling (HIP), thermal shift assay (TSA), enzyme inhibitory effect assay, molecular docking, and in vitro and in vivo antifungal studies. RESULTS: 814 plant products were screened, among which petroselinic acid (PeAc) was found as an antifungal molecule. As a rare fatty acid isolated from coriander (Coriandrum sativum), carrot (Daucus carota) and other plants of the Apiaceae family, PeAc had not previously been found to have antifungal effects. In this study, PeAc was revealed to inhibit the growth of various pathogenic fungi, exhibited synergistic effects with fluconazole (FLC), inhibited the formation of C. albicans hyphae and biofilms, and showed antifungal effects in vivo. PeAc was less toxic to mammalian cells. Fructose-1,6-bisphosphate aldolase (Fba1p) was identified as a target of PeAc by using HIP, TSA, enzyme inhibitory effect assay and molecular docking methods. PeAc exerted antifungal effects more effectively on fba1Δ/FBA1 than wild-type (WT) strain both in vitro and in vivo. CONCLUSIONS: PeAc is an effective and low toxic antifungal compound. The target of PeAc is Fba1p. Fba1p is a promising target for antifungal drug development.

Discovery of Sophoridine α-Aryl Propionamide Derivative ZM600 as a Novel Antihepatic Fibrosis Agent.

Hepatic stellate cells (HSCs) activation is a key event in the development of liver fibrosis, and blockage of the activation of HSCs has been shown to alleviate liver fibrosis. Sophoridine, a bioactive alkaloid found in many Chinese herbs, exhibits a broad spectrum of pharmacological effects, but its activities are not strong. In this study, a series of structurally modified derivatives of sophoridine were designed and synthesized. Among them, sophoridine α-aryl propionamide derivative ZM600 displayed a significant inhibitory effect on the activation of HSCs. The in vivo experiment demonstrated that ZM600 markedly ameliorated carbon tetrachloride (CCl4) and bile duct ligation (BDL)-induced liver fibrosis with a significant improvement of extracellular matrix deposition. Mechanism investigations revealed that ZM600 specifically inhibited the activation of NF-κB, PI-3K/AKT, and TGF-ß/Smads signaling pathways. These results suggest that ZM600 has a protective effect on liver fibrosis, which provides a new candidate for the treatment of liver fibrosis.

Pharmacokinetic, Tissue Distribution, Metabolite, and Toxicity Evaluation of the Matrine Derivative, (6aS, 10S, 11aR, 11bR, 11cS)-10-Methylaminododecahydro-3a, 7a-Diaza-benzo (de) Anthracene-8-thione.

MASM, a structurally modified derivative of matrine, exhibits superior efficacy in reducing inflammation and liver injury in rats when compared to matrine. This study aims to investigate the pharmacokinetic profile and acute toxicity of MASM. Pharmacokinetic results revealed that MASM exhibited rapid absorption, with a Tmax ranging from 0.21 ± 0.04 h to 1.31 ± 0.53 h, and was eliminated slowly, with a t1/2 of approximately 10 h regardless of the route of administration (intravenous, intraperitoneal, or intragastric). The absolute intragastric bioavailability of MASM in rats was determined to be 44.50%, which was significantly higher than that of matrine (18.5%). MASM was detected in all rat tissues including the brain, and through the utilization of stable isotope-labeled compounds and standard references, ten metabolites of MASM, namely sophocarpine, oxysophocarpine, and oxymatrine, were tentatively identified. The LD50 of MASM in mice was determined to be 94.25 mg/kg, surpassing that of matrine (83.21 mg/kg) based on acute toxicity results. Histopathological and biochemical analysis indicated no significant alterations in the primary organs of the low- to medium-dosage groups of MASM. These findings provide valuable insights into the efficacy and toxicity profile of MASM.

Nanoparticle Assembly: From Self-Organization to Controlled Micropatterning for Enhanced Functionalities.

Nanoparticles form long-range micropatterns via self-assembly or directed self-assembly with superior mechanical, electrical, optical, magnetic, chemical, and other functional properties for broad applications, such as structural supports, thermal exchangers, optoelectronics, microelectronics, and robotics. The precisely defined particle assembly at the nanoscale with simultaneously scalable patterning at the microscale is indispensable for enabling functionality and improving the performance of devices. This article provides a comprehensive review of nanoparticle assembly formed primarily via the balance of forces at the nanoscale (e.g., van der Waals, colloidal, capillary, convection, and chemical forces) and nanoparticle-template interactions (e.g., physical confinement, chemical functionalization, additive layer-upon-layer). The review commences with a general overview of nanoparticle self-assembly, with the state-of-the-art literature review and motivation. It subsequently reviews the recent progress in nanoparticle assembly without the presence of surface templates. Manufacturing techniques for surface template fabrication and their influence on nanoparticle assembly efficiency and effectiveness are then explored. The primary focus is the spatial organization and orientational preference of nanoparticles on non-templated and pre-templated surfaces in a controlled manner. Moreover, the article discusses broad applications of micropatterned surfaces, encompassing various fields. Finally, the review concludes with a summary of manufacturing methods, their limitations, and future trends in nanoparticle assembly.

3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review.

Lithium-ion batteries (LIBs) have significantly impacted the daily lives, finding broad applications in various industries such as consumer electronics, electric vehicles, medical devices, aerospace, and power tools. However, they still face issues (i.e., safety due to dendrite propagation, manufacturing cost, random porosities, and basic & planar geometries) that hinder their widespread applications as the demand for LIBs rapidly increases in all sectors due to their high energy and power density values compared to other batteries. Additive manufacturing (AM) is a promising technique for creating precise and programmable structures in energy storage devices. This review first summarizes light, filament, powder, and jetting-based 3D printing methods with the status on current trends and limitations for each AM technology. The paper also delves into 3D printing-enabled electrodes (both anodes and cathodes) and solid-state electrolytes for LIBs, emphasizing the current state-of-the-art materials, manufacturing methods, and properties/performance. Additionally, the current challenges in the AM for electrochemical energy storage (EES) applications, including limited materials, low processing precision, codesign/comanufacturing concepts for complete battery printing, machine learning (ML)/artificial intelligence (AI) for processing optimization and data analysis, environmental risks, and the potential of 4D printing in advanced battery applications, are also presented.

Protective Effect of a Novel RIPK1 Inhibitor, Compound 4-155, in Systemic Inflammatory Response Syndrome and Sepsis.

Excessive inflammatory response is a critical pathogenic factor for the tissue damage and organ failure caused by systemic inflammatory response syndrome (SIRS) and sepsis. In recent years, drugs targeting RIPK1 have proved to be an effective anti-inflammatory strategy. In this study, we identified a novel anti-inflammatory lead compound 4-155 that selectively targets RIPK1. Compound 4-155 significantly inhibited necroptosis of cells, and its activity is about 10 times higher than the widely studied Nec-1 s. The anti-necroptosis effect of 4-155 was mainly dependent on the inhibition of phosphorylation of RIPK1, RIPK3, and MLKL. In addition, we demonstrated that 4-155 specifically binds RIPK1 by drug affinity responsive target stability (DARTS), immunoprecipitation, kinase assay, and immunofluorescence microscopy. More importantly, compound 4-155 could inhibit excessive inflammation in vivo by blocking RIPK1-mediated necroptosis and not influence the activation of MAPK and NF-κB, which is more potential for the subsequent drug development. Compound 4-155 effectively protected mice from TNF-induced SIRS and sepsis. Using different doses, we found that 6 mg/kg oral administration of compound 4-155 could increase the survival rate of SIRS mice from 0 to 90%, and the anti-inflammatory effect of 4-155 in vivo was significantly stronger than Nec-1 s at the same dose. Consistently, 4-155 significantly reduced serum levels of pro-inflammatory cytokines (TNF-α and IL-6) and protected the liver and kidney from excessive inflammatory damages. Taken together, our results suggested that compound 4-155 could inhibit excessive inflammation in vivo by blocking RIPK1-mediated necroptosis, providing a new lead compound for the treatment of SIRS and sepsis.

SOS1-inspired hydrocarbon-stapled peptide as a pan-Ras inhibitor.

Blocking the interaction between Ras and Son of Sevenless homolog 1 (SOS1) has been an attractive therapeutic strategy for treating cancers involving oncogenic Ras mutations. K-Ras mutation is the most common in Ras-driven cancers, accounting for 86%, with N-Ras mutation and H-Ras mutation accounting for 11% and 3%, respectively. Here, we report the design and synthesis of a series of hydrocarbon-stapled peptides to mimic the alpha-helix of SOS1 as pan-Ras inhibitors. Among these stapled peptides, SSOSH-5 was identified to maintain a well-constrained alpha-helical structure and bind to H-Ras with high affinity. SSOSH-5 was furthermore validated to bind with Ras similarly to the parent linear peptide through structural modeling analysis. This optimized stapled peptide was proven to be capable of effectively inhibiting the proliferation of pan-Ras-mutated cancer cells and inducing apoptosis in a dose-dependent manner by modulating downstream kinase signaling. Of note, SSOSH-5 exhibited a high capability of crossing cell membranes and strong proteolytic resistance. We demonstrated that the peptide stapling strategy is a feasible approach for developing peptide-based pan-Ras inhibitors. Furthermore, we expect that SSOSH-5 can be further characterized and optimized for the treatment of Ras-driven cancers.

Roxarsone inhibits hepatic stellate cell activation and ameliorates liver fibrosis by blocking TGF-ß1/Smad signaling pathway.

Hepatic fibrosis is a pathological change caused by chronic liver injury and self-repair, and it is the inevitable stage of the development of chronic liver disease to cirrhosis or even liver cancer. Activation of hepatic stellate cells (HSCs) is a core event in the development of liver fibrosis and blockage of the activation of HSCs has been shown to alleviate liver fibrosis. Roxarsone, an organoarsenic additive, with antibiotic effect, growth promotion and improving feed efficiency, is widely used in livestock and animal production. The purpose of this study was to evaluate the therapeutic effect of Roxarsone on liver fibrosis and explore the possible mechanism. We found that Roxarsone could inhibit transforming growth factor-ß1 (TGF-ß1) induced the activation of HSCs and weaken the migration ability. Moreover, Roxarsone administration significantly ameliorated CCl4-induced liver fibrosis in mice with improvement of liver function and decreases of deposition of extracellular matrix (ECM). Mechanism investigations revealed that Roxarsone specifically inhibited the activation of TGF-ß1/Smad signaling pathway, but had no effect on MAPK and PI3K/AKT pathways. These results suggest that Roxarsone has a protective effect on liver fibrosis which provides a new candidate for the treatment of liver fibrosis.

Saikosaponin D alleviates cancer cachexia by directly inhibiting STAT3.

Cancer cachexia is a metabolic syndrome that is characterized by progressive loss of skeletal muscle mass, and effective therapeutics have yet to be developed. Saikosaponin D (SSD), a major bioactive component of Radix Bupleuri, exhibits antiinflammatory, anti-tumor, anti-oxidant, anti-viral, and hepatoprotective effects. In this study, we demonstrated that SSD is a promising agent for the treatment of cancer cachexia. SSD could alleviate TCM-induced myotube atrophy and inhibit the expression of E3 ubiquitin ligases muscle RING-finger containing protein-1 (MuRF1) and muscle atrophy Fbox protein (Atrogin-1/MAFbx) in vitro. Moreover, SSD suppressed the progression of cancer cachexia, with significant improvements in the loss of body weight, gastrocnemius muscle, and tibialis anterior muscle mass in vivo. Mechanism investigations demonstrated that SSD could directly bind to STAT3 and specifically inhibit its phosphorylation as well as its transcriptional activity. Overexpression of STAT3 partially abolished the inhibitory effect of SSD on myotube atrophy, indicating that the therapeutic effect of SSD was attributed to STAT3 inhibition. These findings provide novel strategies for treatment of cancer cachexia by targeting STAT3, and SSD may be a promising drug candidate for cancer cachexia.

Continuous Three-Dimensional Printing of Architected Piezoelectric Sensors in Minutes.

Additive manufacturing (AM), also known as three-dimensional (3D) printing, is thriving as an effective and robust method in fabricating architected piezoelectric structures, yet most of the commonly adopted printing techniques often face the inherent speed-accuracy trade-off, limiting their speed in manufacturing sophisticated parts containing micro-/nanoscale features. Herein, stabilized, photo-curable resins comprising chemically functionalized piezoelectric nanoparticles (PiezoNPs) were formulated, from which microscale architected 3D piezoelectric structures were printed continuously via micro continuous liquid interface production (µCLIP) at speeds of up to ~60 µm s-1, which are more than 10 times faster than the previously reported stereolithography-based works. The 3D-printed functionalized barium titanate (f-BTO) composites reveal a bulk piezoelectric charge constant d 33 of 27.70 pC N-1 with the 30 wt% f-BTO. Moreover, rationally designed lattice structures that manifested enhanced, tailorable piezoelectric sensing performance as well as mechanical flexibility were tested and explored in diverse flexible and wearable self-powered sensing applications, e.g., motion recognition and respiratory monitoring.

A strategy of screening and binding analysis of bioactive components from traditional Chinese medicine based on surface plasmon resonance biosensor.

Elucidating the active components of traditional Chinese medicine (TCM) is essential for understanding the mechanisms of TCM and promote its rational use as well as TCM-derived drug development. Recent studies have shown that surface plasmon resonance (SPR) technology is promising in this field. In the present study, we propose an SPR-based integrated strategy to screen and analyze the major active components of TCM. We used Radix Paeoniae Alba (RPA) as an example to identify the compounds that can account for its anti-inflammatory mechanism via tumor necrosis factor receptor type 1 (TNF-R1). First, RPA extraction was analyzed using an SPR-based screening system, and the potential active ingredients were collected, enriched, and identified as paeoniflorin and paeonol. Next, the affinity constants of paeoniflorin and paeonol were determined as 4.9 and 11.8 µM, respectively. Then, SPR-based competition assays and molecular docking were performed to show that the two compounds could compete with tumor necrosis factor-α (TNF-α) while binding to the subdomain 1 site of TNF-R1. Finally, in biological assays, the two compounds suppressed cytotoxicity and apoptosis induced by TNF-α in the L929 cell line. These findings prove that SPR technology is a useful tool for determining the active ingredients of TCM at the molecular level and can be used in various aspects of drug development. The SPR-based integrated strategy is reliable and feasible in TCM studies and will shed light on the elucidation of the pharmacological mechanism of TCM and facilitate its modernization.

Crosslinked Polyethylene (XLPE) Recycling via Foams.

Efficient recycling of crosslinked polyethylene has been challenging due to manufacturing difficulties caused by chemical crosslinking. This study focuses on simple processing via solid waste powder generation and particle fining for the subsequent crosslinked polyethylene inclusion and dispersion in rigid polyurethane foam. In addition, the concentration effects of crosslinked polyethylene in polyurethane were studied, showing a well-controlled foam microstructure with uniform pores, retained strength, better thermal degradation resistance, and, more importantly, increased thermal capabilities. Thus, the simple mechanical processing of crosslinked polyethylene and chemical urethane foaming showed the massive potential of recycling large amounts of crosslinked polyethylene in foams for broad applications in food packaging, house insulation, and sound reduction.

Polydatin alleviates DSS- and TNBS-induced colitis by suppressing Th17 cell differentiation via directly inhibiting STAT3.

Inflammatory bowel disease (IBD) is a non-specific chronic intestinal inflammatory disease, often presenting with abdominal pain, diarrhea, bloody stool, anorexia, and body loss. It is difficult to cure completely and a promising treatment is urgently needed. Natural compounds can offer promising chemical agents for treatment of diseases. Polydatin is a natural ingredient extracted from the dried rhizome of Polygonum cuspidatum, which has anti-inflammatory, anti-tumor, and dementia protection activities. The purpose of this study was to evaluate the therapeutic effect of polydatin on IBD and explore its possible mechanism. We found that polydatin could effectively suppress the differentiation of Th17 cells in vitro, but had no effect on the differentiation of Treg cells. Polydatin significantly alleviated colitis induced by dextran sulfate sodium (DSS) and 2, 4, 6-trinitrobenzenesulfonic acid (TNBS) in mice, and dramatically decreased the proportion of Th17 cells in spleen and mesenteric lymph nodes. Mechanism investigations revealed that polydatin specifically inhibited signal transducer and activator of transcription 3 (STAT3) phosphorylation by directly binding to STAT3, leading to Th17 cell reduction and thereby alleviating colitis. These findings provide novel insights into the anti-colitis effect of polydatin, which may be a promising drug candidate for the treatment of IBD.

Cryptotanshinone ameliorates dextran sulfate sodium-induced murine acute and chronic ulcerative colitis via suppressing STAT3 activation and Th17 cell differentiation.

Ulcerative colitis (UC) is a chronically relapsing inflammatory disease in the intestinal tract. Current unsatisfactory treatments prompt people to seek for alternative therapies and drug candidates. Cryptotanshinone (CTS), a diterpene quinoneextractedfromthe roots ofSalviamiltiorrhiza, has recently been shown to inhibit acute colitis by reducing pro-inflammatory mediators. However, whether CTS can protect against chronic UC and its effect on T lymphocytes remain unknown. In this study, CTS (20, 60 mg/kg) showed potent inhibitory activity against dextran sulfate sodium (DSS)-induced acute UC, as determined by weight loss, disease activity, colon length and histology. Similarly, in a model of DSS-induced chronic colitis, the administration of CTS prevented the disease progression with longer colon length, lower histological scores, and less expression of fibrosis-related collagen and α-smooth muscle actin in the colon. CTS also reduced the proportion of CD4+IL-17A+ Th17 cells in spleen and mesenteric lymph nodes of mice with acute or chronic colitis. However, CTS at 20 mg/kg had no effect on regulatory T cells (Tregs). In addition, CTS reduced the phosphorylation of signal transduction and transcription activator 3 (STAT3) in DSS-treated colon tissue. Further study showed that CTS concentration-dependently suppressed the differentiation of naïve CD4+ T cells into Th17 cells. CTS could not inhibit the activation and proliferation of T lymphocytes or attenuate the secretion of cytokines including IL-10, IL-2, IL-6 and IFN-γ, but could inhibit the production of IL-17A and TNF-α in Con A-stimulated splenocytes. CTS suppressed IL-6-induced phosphorylation and nuclear translocation of STAT3. In conclusion, our study demonstrated that CTS alleviated acute and chronic UC by suppressing STAT3 activation and Th17 cell differentiation, suggesting that it may be a promising candidate drug for the treatment of UC.

ARG1 as a promising biomarker for sepsis diagnosis and prognosis: evidence from WGCNA and PPI network.

BACKGROUND: Sepsis is a life-threatening multi-organ dysfunction caused by the dysregulated host response to infection. Sepsis remains a major global concern with high mortality and morbidity, while management of sepsis patients relies heavily on early recognition and rapid stratification. This study aims to identify the crucial genes and biomarkers for sepsis which could guide clinicians to make rapid diagnosis and prognostication. METHODS: Preliminary analysis of multiple global datasets, including 170 samples from patients with sepsis and 110 healthy control samples, revealed common differentially expressed genes (DEGs) in peripheral blood of patients with sepsis. After Gene Oncology (GO) and pathway analysis, the Weighted Gene Correlation Network Analysis (WGCNA) was used to screen for genes most related with clinical diagnosis. Also, the Protein-Protein Interaction Network (PPI Network) was constructed based on the DEGs and the hub genes were found. The results of WGCNA and PPI network were compared and one shared gene was discovered. Then more datasets of 728 experimental samples and 355 control samples were used to prove the diagnostic and prognostic value of this gene. Last, we used real-time PCR to confirm the bioinformatic results. RESULTS: Four hundred forty-four common differentially expressed genes in the blood of sepsis patients from different ethnicities were identified. Fifteen genes most related with clinical diagnosis were found by WGCNA, and 24 hub genes with most node degrees were identified by PPI network. ARG1 turned out to be the unique overlapped gene. Further analysis using more datasets showed that ARG1 was not only sharply up-regulated in sepsis than in healthy controls, but also significantly high-expressed in septic shock than in non-septic shock, significantly high-expressed in severe or lethal sepsis than in uncomplicated sepsis, and significantly high-expressed in non-responders than in responders upon early treatment. These all demonstrate the performance of ARG1 as a key biomarker. Last, the up-regulation of ARG1 in the blood was confirmed experimentally. CONCLUSIONS: We identified crucial genes that may play significant roles in sepsis by WGCNA and PPI network. ARG1 was the only overlapped gene in both results and could be used to make an accurate diagnosis, discriminate the severity and predict the treatment response of sepsis.

The matrine derivate MASM inhibits astrocyte reactivity and alleviates experimental autoimmune encephalomyelitis in mice.

Astrocytes (AST) play an important role in the pathogenesis of neurological disorders, and their activation is involved in the progression of multiple sclerosis (MS). (6aS, 10S, 11aR, 11bR, 11cS)-10-methylaminododecahydro-3a, 7a-diaza-benzo (de) anthracene-8-thione (MASM), a novel derivative of matrine, exhibits vast pharmacological activities, such as anti-tumor, anti-fibrosis and immune regulation. In this study, we demonstrate that MASM is a promising agent for the treatment of experimental autoimmune encephalomyelitis (EAE). MASM not only inhibited inflammatory responses in LPS-stimulated astrocytes, but also suppressed the formation of reactive A1 astrocyte and maintained astrocytic functions, including the ability to promote synapse formation and phagocytose synapses and myelin debris. Importantly, MASM could significantly alleviate the development of EAE, with significant inhibition of inflammation, demyelination, axon loss and the body weight loss. Meanwhile, MASM also inhibited the activation of astrocytes and improved the function of BBB in vivo. These findings provide novel insights into the protective effect of MASM on EAE, which may be a promising drug candidate for treatment of EAE.

Intrinsic Field-Induced Nanoparticle Assembly in Three-Dimensional (3D) Printing Polymeric Composites.

Nanoparticles (NPs) are materials considered to be 1-100 nm in size and are available in different dimensional shapes, geometrical sizes, physical morphologies, mechanical robustness, and chemical compositions. Irrespective of the dimensions (i.e., zero-dimensional (0D), one-dimensional (1D), and two-dimensional (2D)), NPs have a tendency to become entangled together, forming aggregations due to high attraction, making it hard to realize their full potential from their ordered counterparts. Many challenges exist to attain high-quality stabilized dispersion and long-range ordered assembly of NPs. Three-dimensional printing (3DP), also known as additive manufacturing (AM), is a technique dependent on layer-by-layer material addition for building 3D structures and encompasses a few categories based on the feedstock material types and printing mechanisms. One benefit from the 3DP procedures is their capability to produce anisotropic microstructural/nanostructural characteristics for desired mechanical reinforcement, transport phenomena, energy management, and biomedical implants. This paper briefly overviews relevant 3DP methods with an embedded nature to assemble nanoparticles without interference with external fields (e.g., magnetic or electrical). Our focus is the shear-field-induced nanoparticle alignment, covering material jetting-, electrohydrodynamic-, filament melting-, and ink writing-based 3DP. A concise summary of photopolymerization and its "optical tweezer" effects on nanoparticle confinement also inspires creative approaches in generating ordered nanostructures. The nanoparticles and polymers involved in this review are diverse, consisting of metallic, ceramic, and carbon nanoparticles in matrices or on surfaces of varying macromolecules. A short statement of challenges (e.g., low resolution, slow printing speed, limited material options) for 3DP-enabled nanoparticle orders provides some perspectives toward the enormous potential of 3DP in directing NPs assembly and fabricating high-performance polymer/nanoparticle composites.

Molecular Basis of Prostate Cancer and Natural Products as Potential Chemotherapeutic and Chemopreventive Agents.

Prostate cancer is the second most common malignant cancer in males. It involves a complex process driven by diverse molecular pathways that closely related to the survival, apoptosis, metabolic and metastatic characteristics of aggressive cancer. Prostate cancer can be categorized into androgen dependent prostate cancer and castration-resistant prostate cancer and cure remains elusive due to the developed resistance of the disease. Natural compounds represent an extraordinary resource of structural scaffolds with high diversity that can offer promising chemical agents for making prostate cancer less devastating and curable. Herein, those natural compounds of different origins and structures with potential cytotoxicity and/or in vivo anti-tumor activities against prostate cancer are critically reviewed and summarized according to the cellular signaling pathways they interfere. Moreover, the anti-prostate cancer efficacy of many nutrients, medicinal plant extracts and Chinese medical formulations were presented, and the future prospects for the application of these compounds and extracts were discussed. Although the failure of conventional chemotherapy as well as involved serious side effects makes natural products ideal candidates for the treatment of prostate cancer, more investigations of preclinical and even clinical studies are necessary to make use of these medical substances reasonably. Therefore, the elucidation of structure-activity relationship and precise mechanism of action, identification of novel potential molecular targets, and optimization of drug combination are essential in natural medicine research and development.

Two Reference-Quality Sea Snake Genomes Reveal Their Divergent Evolution of Adaptive Traits and Venom Systems.

True sea snakes (Hydrophiini) are among the last and most successful clades of vertebrates that show secondary marine adaptation, exhibiting diverse phenotypic traits and lethal venom systems. To better understand their evolution, we generated the first chromosome-level genomes of two representative Hydrophiini snakes, Hydrophis cyanocinctus and H. curtus. Through comparative genomics we identified a great expansion of the underwater olfaction-related V2R gene family, consisting of more than 1,000 copies in both snakes. A series of chromosome rearrangements and genomic structural variations were recognized, including large inversions longer than 30 megabase (Mb) on sex chromosomes which potentially affect key functional genes associated with differentiated phenotypes between the two species. By integrating multiomics we found a significant loss of the major weapon for elapid predation, three-finger toxin genes, which displayed a dosage effect in H. curtus. These genetic changes may imply mechanisms that drove the divergent evolution of adaptive traits including prey preferences between the two closely related snakes. Our reference-quality sea snake genomes also enrich the repositories for addressing important issues on the evolution of marine tetrapods, and provide a resource for discovering marine-derived biological products.

3D Printing-Enabled Nanoparticle Alignment: A Review of Mechanisms and Applications.

3D printing (additive manufacturing (AM)) has enormous potential for rapid tooling and mass production due to its design flexibility and significant reduction of the timeline from design to manufacturing. The current state-of-the-art in 3D printing focuses on material manufacturability and engineering applications. However, there still exists the bottleneck of low printing resolution and processing rates, especially when nanomaterials need tailorable orders at different scales. An interesting phenomenon is the preferential alignment of nanoparticles that enhance material properties. Therefore, this review emphasizes the landscape of nanoparticle alignment in the context of 3D printing. Herein, a brief overview of 3D printing is provided, followed by a comprehensive summary of the 3D printing-enabled nanoparticle alignment in well-established and in-house customized 3D printing mechanisms that can lead to selective deposition and preferential orientation of nanoparticles. Subsequently, it is listed that typical applications that utilized the properties of ordered nanoparticles (e.g., structural composites, heat conductors, chemo-resistive sensors, engineered surfaces, tissue scaffolds, and actuators based on structural and functional property improvement). This review's emphasis is on the particle alignment methodology and the performance of composites incorporating aligned nanoparticles. In the end, significant limitations of current 3D printing techniques are identified together with future perspectives.