Multimodal ultrasound imaging: a method to improve the accuracy of sentinel lymph node diagnosis in breast cancer.

Aim: This study assessed the utility of multimodal ultrasound in enhancing the accuracy of breast cancer sentinel lymph node (SLN) assessment and compared it with single-modality ultrasound. Methods: Preoperative examinations, including two-dimensional ultrasound (2D US), intradermal contrast-enhanced ultrasound (CEUS), intravenous CEUS, shear-wave elastography (SWE), and surface localization, were conducted on 86 SLNs from breast cancer patients. The diagnostic performance of single and multimodal approaches for detecting metastatic SLNs was compared to postoperative pathological results. Results: Among the 86 SLNs, 29 were pathologically diagnosed as metastatic, and 57 as non-metastatic. Single-modality ultrasounds had AUC values of 0.826 (intradermal CEUS), 0.705 (intravenous CEUS), 0.678 (2D US), and 0.677 (SWE), respectively. Intradermal CEUS significantly outperformed the other methods (p<0.05), while the remaining three methods had no statistically significant differences (p>0.05). Multimodal ultrasound, combining intradermal CEUS, intravenous CEUS, 2D US, and SWE, achieved an AUC of 0.893, with 86.21% sensitivity and 84.21% specificity. The DeLong test confirmed that multimodal ultrasound was significantly better than the four single-modal ultrasound methods (p<0.05). Decision curve analysis and clinical impact curves demonstrated the superior performance of multimodal ultrasound in identifying high-risk SLN patients. Conclusion: Multimodal ultrasound improves breast cancer SLN identification and diagnostic accuracy.

Assessing Swallowing Dysfunction Aggravation in Chronic Obstructive Pulmonary Disease Patients Using Ultrasonic Measurements With Swallowing Movement Parameters.

OBJECTIVE: To investigate the correlation between ultrasonic measurements of swallowing movement parameters and aggravation of swallowing dysfunction in patients with chronic obstructive pulmonary disease (COPD). METHODS: COPD patients with swallowing dysfunction (n = 120) and COPD patients with normal swallowing function (n = 100) treated in our hospital between January 2020 and January 2023 were included in observation and control groups, respectively. The correlation between ultrasonic measurements of swallowing movement parameters and COPD with swallowing dysfunction was analyzed. The observation group was divided into mild and severe groups according to their Gugging Swallowing Screen (GUSS) scores. The correlation between ultrasonic measurements of swallowing movement parameters and COPD exacerbation combined with swallowing dysfunction was analyzed. RESULTS: In the observation group, Hyoid muscle thickness, hyoid bone displacement, geniohyoid muscle movement distance, HLAS, and CSR were lower compared to the control group, negatively associated with COPD-related swallowing issues. Conversely, geniohyoid muscle movement time and minimum hyohyoid distance (NHLA) were higher in the observation group, positively correlated with COPD-related swallowing dysfunction. In COPD patients with swallowing problems, the severe group exhibited lower values for lingual muscle thickness, hyoid bone displacement, geniohyoid muscle movement distance, HLAS, and CSR compared to the mild group, while geniohyoid muscle movement time and NHLA were higher in the severe group. Receiver operating characteristic (ROC) curves were created, indicating the promising diagnostic utility of these parameters for assessing the presence and severity of swallowing dysfunction in COPD patients. CONCLUSION: The ultrasonic measurement of swallowing motion parameters can effectively assess swallowing dysfunction in COPD patients.

Risk estimation for postoperative nausea and vomiting: development and validation of a nomogram based on point-of-care gastric ultrasound.

BACKGROUND: We aimed to develop a nomogram that can be combined with point-of-care gastric ultrasound and utilised to predict postoperative nausea and vomiting (PONV) in adult patients after emergency surgery. METHODS: Imaging and clinical data of 236 adult patients undergoing emergency surgery in a university hospital between April 2022 and February 2023 were prospectively collected. Patients were divided into a training cohort (n = 177) and a verification cohort (n = 59) in a ratio of 3:1, according to a random number table. After univariate analysis and multivariate logistic regression analysis of the training cohort, independent risk factors for PONV were screened to develop the nomogram model. The receiver operating characteristic curve, calibration curve, decision curve analysis (DCA) and clinical impact curve (CIC) were used to evaluate the prediction efficiency, accuracy, and clinical practicability of the model. RESULTS: Univariate analysis and multivariate logistic regression analysis showed that female sex, history of PONV, history of migraine and gastric cross-sectional area were independent risk factors for PONV. These four independent risk factors were utilised to construct the nomogram model, which achieved significant concordance indices of 0.832 (95% confidence interval [CI], 0.771-0.893) and 0.827 (95% CI, 0.722-0.932) for predicting PONV in the training and validation cohorts, respectively. The nomogram also had well-fitted calibration curves. DCA and CIC indicated that the nomogram had great clinical practicability. CONCLUSIONS: This study demonstrated the prediction efficacy, differentiation, and clinical practicability of a nomogram for predicting PONV. This nomogram may serve as an intuitive and visual guide for rapid risk assessment in patients with PONV before emergency surgery.

Advances in pathogenesis and treatment of ocular involvement in Behcet's disease.

Behcet's disease (BD) is a chronic multi-systemic disease characterized by relapsing-remitting oral ulcers, genital ulcers, ocular inflammatory involvements, and numerous other systemic features. Ocular involvements are quite common in BD and may cause severe tissue damage and potentially blindness. Even though the pathogenesis of BD remains ambiguous, growing evidences have shown that genetic factors, environmental triggers and immunological abnormalities play significant roles in its development and progression. Novel biotherapies targeting IFN-γ, TNF-α and interleukins have been used in recent years. In this review, we mainly pay attention to the ocular involvement of BD, and discuss the current understanding of mechanisms and advances in therapeutic approaches, especially novel biologics. Finally, we discuss the management in patients with pregnancy.

A Bridge-Linked Phosphorus-Containing Flame Retardant for Endowing Vinyl Ester Resin with Low Fire Hazard.

The high flammability of vinyl ester resin (VE) significantly limits its widespread application in the fields of electronics and aerospace. A new phosphorus-based flame retardant 6,6'-(1-phenylethane-1,2 diyl) bis (dibenzo[c,e][1,2]oxaphosphinine 6-oxide) (PBDOO), was synthesized using 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and acetophenone. The synthesized PBDOO was further incorporated with VE to form the VE/PBDOO composites, which displayed an improved flame retardancy with higher thermal stability. The structure of PBDOO was investigated using Fourier transformed infrared spectrometry (FTIR) and nuclear magnetic resonances (NMR). The thermal stability and flame retardancy of VE/PBDOO composites were investigated by thermogravimetric analysis (TGA), vertical burn test (UL-94), limiting oxygen index (LOI), and cone calorimetry. The impacts of PBDOO weight percentage (wt%) on the flame-retardant properties of the formed VE/PBDOO composites were also examined. When applying 15 wt% PBDOO, the formed VE composites can meet the UL-94 V-0 rating with a high LOI value of 31.5%. The peak heat release rate (PHRR) and the total heat release (THR) of VE loaded 15 wt% of PBDOO decreased by 76.71% and 40.63%, respectively, compared with that of untreated VE. In addition, the flame-retardant mechanism of PBDOO was proposed by analyzing pyrolysis behavior and residual carbon of VE/PBDOO composites. This work is expected to provide an efficient method to enhance the fire safety of VE.

Testing and Evaluation of Flexural Tensile Strength of Prestressed CFRP Cables.

To expand the application scope of prestressed carbon fiber-reinforced polymer (CFRP) cables in civil engineering, the ultimate tensile strength of these cables was tested and evaluated under bending conditions. First, the study analyzed the tensile failure mechanism of CFRP cables under bending conditions based on elastic bending analysis theory. Thereafter, the ultimate stress state of individual tendons and cables was derived and a calculation model for the tensile strength of bent CFRP cables was established. Second, 14 sets of test conditions were created for CFRP cables under bending angles of 20-40° and bending radii of 1.5-3 m. Then, bending tensile tests were conducted to evaluate the effects of the above factors on the ultimate tensile strength, and the correctness of the computational model was verified using experiments. Finally, the ultimate performance of CFRP cables was theoretically predicted using the established model. The results showed that the cable bending tensile strength was associated with the radius r, tensile strength f, and elastic modulus E of the reinforced material and the bending radius R, but was not correlated with the interface buffer material or the bending angle of the steering system. Moreover, the flexural tensile residual strength was only affected by R/r and E/f. When E/f involved conventional material parameters, the residual strength increased nonlinearly with increased R/r. When R/r ≥ 600, the residual strength reached more than 80%. Therefore, R/r at 600 could be used as the design basis for a safe critical radius.

Immunotherapy and immunobiomarker in breast cancer: current practice and future perspectives.

Among the new cancer cases and resulting deaths among women worldwide, breast cancer is the most significant threat to women's health. In recent years, immunotherapy was initially used to treat patients with metastatic breast cancer, where it demonstrated its unique value by providing a novel way to improve therapeutic effects and prolong survival time. With the development of clinical trials related to immunotherapy for breast cancer, tumour vaccines, such as DNA vaccines, have been observed to improve the disease-free survival (DFS) and overall survival (OS) of patients. Monoclonal antibodies have also shown good efficacy, and adoptive cell therapies, such as CAR-T, exhibit strong tumour killing ability and good safety, and thus, these therapies may comprise a new strategy for the treatment of breast cancer. These breakthrough successes have promoted the achievement of "individualized" breast cancer treatment. Moreover, a recent study showed that patients with various cancer types with a higher tumour mutational burden (TMB) are more likely to benefit from immunotherapy. As research progresses, TMB may also demonstrate a certain clinical significance in the treatment of breast cancer. This paper reviews the latest research progress on breast cancer immunotherapy and the predictive value and application status of TMB in immunotherapy regimens for breast cancer patients to provide a reference for further in-depth studies of breast cancer immunotherapy.

Impact factors of POCUS-guided cannulation for peripheral venoarterial extracorporeal membrane oxygenation: One single-center retrospective clinical analysis.

We aimed to evaluate associated factors for point-of-care ultrasound (POCUS)-guided percutaneous catheterization for venoarterial extracorporeal membrane oxygenation (VA-ECMO). VA-ECMO cases from March 2018 to October 2020 in Department of Intensive Care Unit, Binhaiwan Central Hospital of Dongguan, were enrolled. Clinical data, outcomes, and complications were recorded and summarized. Fifty-nine cases were enrolled, among which 88.1% succeeded in POCUS-guided catheterization via Seldinger technique, whereas 59.3% succeeded at the first puncture. Results showed that artery diameter and times of arterial punctures were independent associated factors for Seldinger puncture (P = .018, odds ratio [OR] = 23.374, 95% confidence interval [CI] = 1.706-320.270; P = .031, OR = 145.098, 95% CI = 1.592-13220.980), and artery diameter and cardiac ejection fraction value (≥30%/<30%) were independent associated factors for first puncture (P = .044, OR = 1.622, 95% CI = 1.014-2.596; P = .013, OR = 5.565, 95% CI = 1.441-21.488). For extracorporeal cardiopulmonary resuscitation patients, artery diameter was independent associated factor for Seldinger puncture (P = .022, OR = 2.070, 95% CI = 1.110-3.858), and cardiac ejection fraction value (≥30%/<30%) was independent associated factor for first puncture (P = .007, OR = 9.533, 95% CI = 1.847-49.204). Thirteen patients (22.0%) had local hemorrhage post puncture, 8 patients (13.6%) presented distal limb arterial ischemia, and 8 patients (13.6%) suffered puncture-related thrombosis. Vasoactive Inotropic Score was found to be independent associated factor for local hemorrhage (P = .039, OR = 0.994, 95% CI = 0.988-1.000), and the Acute Physiology and Chronic Health Evaluation II score was independent associated factor for thrombosis (P = .025, OR = 0.935, 95% CI = 0.882-0.992). Diabetes and cardiopulmonary resuscitation time before catheterization were independent factors for distal limb ischemia (P = .026, OR = 220.774, 95% CI = 1.905-25591.327; P = .017, OR = 1.054, 95% CI = 1.009-1.101). POCUS-guided percutaneous catheterization via Seldinger technique can be the first choice for VA-ECMO cannulation, especially for a team without angiotomy qualifications. Before cannulation, evaluating the target artery and heart function by ultrasound can help predict outcome of catheterization. Assessing risk factors (diabetes, cardiopulmonary resuscitation time before catheterization, Vasoactive Inotropic Score, the Acute Physiology and Chronic Health Evaluation II score) is helpful for prevention and treatment of complications.

Therapeutic implications of nanodrug and tissue engineering for retinal pigment epithelium-related diseases.

The retinal pigment epithelium (RPE), as a single layer of cells that performs multiple functions posteriorly in the eye, is a promising target site for the prevention and treatment of several clinical diseases, including proliferative diabetic retinopathy, age-related macular degeneration, chorionic neovascularization, and retinitis pigmentosa. In recent decades, several nanodrug delivery platforms and tissue-engineered RPE have been widely developed to treat RPE-related diseases. This work summarizes the recent advances in nanoplatforms and tissue engineering scaffolds developed in these fields. The diseases associated with pathological RPE and their common therapy strategies are first introduced. Then, the recent progress made with a variety of drug delivery systems is presented, with an emphasis on the modification strategies of nanomaterials for targeted delivery. Tissue engineering-mediated RPE transplantation for treating these diseases is subsequently described. Finally, the clinical translation challenges in these fields are discussed in depth. This article will offer readers a better understanding of emerging nanotechnology and tissue engineering related to the treatment of RPE-related diseases and could facilitate their widespread use in experiments in vivo and in clinical applications.

Pathogenesis of COVID-19 and the quality control of nucleic acid detection.

The new coronavirus pneumonia (COVID-19) epidemic spread rapidly throughout the world. Considering the strong infectivity and clustering of COVID-19, early detection of infectious cases is of great significance to control the epidemic. Nucleic acid testing (NAT) plays an important role in rapid laboratory diagnosis, treatment assessment, epidemic prevention and control of COVID-19. However, since COVID-19 is caused by a new emerging virus and NAT for COVID-19 has not been clinically applied before, false negative results inconsistent with clinical diagnosis have appeared in clinical practice. Therefore, it is urgent to improve the sensitivity of NAT for COVID-19. This study aimed to summarize the current situation and prospect of NAT based on the latest findings on COVID-19 infection. Also, the quality control of sample collection was discussed. Hopefully, this study could help to improve the effectiveness of NAT for COVID-19.

Potential effects of COVID-19 on reproductive health: a mini review.

Coronavirus disease 2019 (COVID-19) is now a major public health problem worldwide. Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infectivity is extremely strong. One major target of the virus is the lung, which can lead to death due to the development of respiratory distress syndrome and even multiple system organ failure. The possible pathophysiology by which SARS-CoV-2 affects the object is by way of the receptor, angiotensin-converting enzyme 2 (ACE2). From the study of the viral structure and infection mechanisms, researchers have discovered that the ACE2 acts as a receptor for SARS-CoV-2. According to previous studies, ACE2 is one of the key enzymes in the RAS system. Physiological functions can be found in angiosarcomas and in the kidney, liver, intestine and so on. Whether SARS-CoV-2 infection leads to male fertility impairment has recently received attention. Nevertheless, the association between SARS-CoV-2 infection and reproductive health is currently poorly understood. Using key words including "SARS-CoV-2", "reproductive health", "ACE2" and "2019-nCoV", we retrieved original articles and reviews from the PubMed and WEB OF SCI databases published before December 16, 2020 and performed a thorough review of them. Compared with females, we discovered that infected person with SARS-CoV-2 was higher in males. Men who were infected with SARS-CoV-2 may be easy to suffer from impaired reproductive health. These investigations would help for a comprehensive grasp of the relationship between SARS-CoV-2 infection and reproductive health.

Progresses in nucleic acid testing for COVID-19.

COVID-19 (Coronavirus disease 2019) epidemic has rapidly spread since its outbreak. By 24:00, July 19, China had reported 83,682 confirmed infectious cases of COVID-19, including 4,634 deaths. The prevention and control of COVID-19 remains extremely urgent. Owing to its strong infectivity and onset in populations, early detection of infectious cases of COVID-19 is of great significance to control the epidemic. Nevertheless, clinical experiences in nucleic acid testing (NAT) are limited. False negative results of NAT inconsistent with clinical diagnosis are often reported. Therefore, it is necessary to improve the sensitivity and specificity of NAT. This study aims to summarize the current situation and prospect of NAT application based on the lasted findings on COVID-19 infection. Meanwhile, potential methods are proposed to improve the validity of NAT, like improving sample quality. The review may provide references for clinical and experimental explorations on COVID-19.

The application of quality control circle to improve the quality of samples: A SQUIRE-compliant quality-improving study.

Since its application in medical institutions in China, quality control circle (QCC) has gained achievements in medical care and thus earned more attention from the administrative department of health.In order to improve the quality of laboratory specimens, we launched a QCC activity to solve the problems and evaluate the effect of it. The data of 30,105 unqualified specimens in our hospital were collected from February to June 2017. After the QCC activity, the data of 43,125 specimens taken from July to December 2017 were collected.The defect rate of the specimens before the QCC activity was 0.98% (297/30105), and after the QCC activity, it was 0.45% (193/43125), showing a significant statistical difference (P < .05). The achievement rate and improvement rate were 108.2% and 54.1%, respectively.After the implementation of QCC, the defect rate of specimens in clinical laboratories was significantly decreased, and the intangible factors were also improved, which demonstrated the positive effects of QCC on the quality control of specimens.

Point-of-Care Ultrasound-A New Option for Early Quantitative Assessment of Pulmonary Edema.

The aim of the work described here was to investigate the value of point-of-care ultrasound (POCUS) in the early assessment of the severity of pulmonary edema in rabbits. A rabbit oleic acid (OA)-induced pulmonary edema model was used. Thirty-two New Zealand rabbits were randomly divided into four groups: a control group and three pulmonary edema groups (mild, moderate and severe). Features of transthoracic B-line artifacts (BLA), blood pH, PaO2 and PaCO2, serum inflammatory factors, lung coefficient (LC), lung wet-to-dry weight ratio (W/D) and lung histopathology were assessed. BLA features and severity of pulmonary edema were semiquantitatively scored. Correlations between the number of BLA and PaO2, PaCO2, serum inflammatory factors, LC and W/D were analyzed. An additional 8 rabbits with severe pulmonary edema were used as the verified group, in which the lung was divided into ex vivo BLA (BLA-ev)-free (BLA-ev-free) and BLA-ev-clustered subregions depending on the features of BLA-ev recorded by ex vivo lung ultrasound. Lung specimens from each subregion were collected for histopathological examination. Relationships between features of BLA-ev and lung histopathological abnormalities were analyzed. With increasing doses of OA, number of BLA, W/D and levels of serum inflammatory factors decreased. Meanwhile, lung pathologic abnormalities were aggravated. In addition, time of appearance of BLA, blood pH and PaO2, and PaCO2 decreased dose dependently on OA (p < 0.05). Number of BLA was linear positively correlated with severity of pulmonary edema (r = 0.953, p < 0.05). Consistently, the features of BLA-ev reflected the severity of lung histopathological abnormalities (r = 0.936, p < 0.05). Thus, POCUS is useful in the early quantitative assessment of the severity of pulmonary edema.

[Pollution Characteristics and Emission Coefficients for Volatile Organic Compounds from the Synthetic Leather Industry in Zhejiang Province].

Based on the survey of 175 synthetic leather enterprises in Zhejiang Province, China, in 2014, this paper analyzes the control of volatile organic compounds (VOCs) and, ultimately, screened 161 key enterprises for further research. The results showed that most enterprises take measures to control waste gas; however, there is a distinct problem with the efficiency of exhaust gas collection. The industry used Solvent-based materials. The main VOC pollutants were DMF, toluene, methyl acetate, acetone, ethylacetate, and butanone. The VOC emission coefficient of the synthetic leather industry in Zhejiang was 0.168 kg·m-2. The industry includes polyurethane and polyvinyl chloride processes, for which VOC emission coefficients were 0.170 kg·m-2 and 0.142 kg·m-2, respectively. In addition, the emission coefficient of polyurethane wet processes was 0.191 kg·m-2 and that of dry processes was 0.179 kg·m-2. The emission coefficient for VOCs in post-treatment processes was 0.120 kg·m-2.

Edge-Aided Reliable Data Transmission for Heterogeneous Edge-IoT Sensor Networks.

Wireless sensor networks have been attracting research attention for the past decade and will continue to be a hot topic due to the emerging trend of Internet-of-Things (IoT). Edge computing for IoT (Edge-IoT) is a promising framework that can help low-powered sensor networks to conduct complex computational tasks. Different from the existing works that focus on cooperative task execution for edge and sensor networks, in this paper, we investigate the problem of reliable data transmission in edge-aided sensor networks. Firstly, we discuss how edge servers can help to improve the data transmission of sensor networks. Secondly, we propose a forwarding scheme for edge nodes to forward packets according to coverage and corresponding interference. Thirdly, we propose an edge-based error recovery approach. By employing edge servers for data transmission and error recovery, the efficiency and reliability of data transmissions can be largely improved.

[Pollution Characteristics and Emission Coefficient of Volatile Organic Compounds from Auto/motorcycle Parts & Accessories Manufacturing in Zhejiang Province].

The status of volatile organic compound (VOC) treatment in auto/motorcycle parts & accessories manufacturing in Zhejiang province was analyzed based on data from a survey investigating 70 concerned enterprises conducted in 2015. The pollution characteristics were further explored and the emission coefficient of VOCs released from this industry was preliminarily calculated by analyzing the survey data of 56 of the typical enterprises that had been screened further. The results showed that about two thirds of the enterprises had been equipped with collection and treatment facilities, but most of those facilities were running abnormally. Solvent-based materials were used commonly in this industry, and the main VOCs pollutants were xylene, butyl acetate, cyclohexanone, acetic ether, and toluene. The VOCs emission coefficient of auto/motorcycle parts & accessories manufacturing in Zhejiang was 414 g·(thousand yuan)-1, whereas the emission coefficient of the enterprises producing parts & accessories for only auto was 294 g·(thousand yuan)-1. As for the the enterprises producing parts & accessories for only motorcycle and for both auto and motorcycle, the emission coefficient reached 715 g·(thousand yuan)-1.

Bulk Data Dissemination in Low Power Sensor Networks: Present and Future Directions.

Wireless sensor network-based (WSN-based) applications need an efficient and reliable data dissemination service to facilitate maintenance, management and data distribution tasks. As WSNs nowadays are becoming pervasive and data intensive, bulk data dissemination protocols have been extensively studied recently. This paper provides a comprehensive survey of the state-of-the-art bulk data dissemination protocols. The large number of papers available in the literature propose various techniques to optimize the dissemination protocols. Different from the existing survey works which separately explores the building blocks of dissemination, our work categorizes the literature according to the optimization purposes: Reliability, Scalability and Transmission/Energy efficiency. By summarizing and reviewing the key insights and techniques, we further discuss on the future directions for each category. Our survey helps unveil three key findings for future direction: (1) The recent advances in wireless communications (e.g., study on cross-technology interference, error estimating codes, constructive interference, capture effect) can be potentially exploited to support further optimization on the reliability and energy efficiency of dissemination protocols; (2) Dissemination in multi-channel, multi-task and opportunistic networks requires more efforts to fully exploit the spatial-temporal network resources to enhance the data propagation; (3) Since many designs incur changes on MAC layer protocols, the co-existence of dissemination with other network protocols is another problem left to be addressed.

[Pollution Characteristics and Emission Coefficient of Volatile Organic Compounds from Woodwork-making Industry in Zhejiang Province].

To explore the pollution characteristics and emission coefficient of volatile organic compound (VOCs) released from the woodwork-making industry in Zhejiang province, this paper used the survey data of 310 woodwork enterprises obtained in 2015 to analyze the current VOCs treatment status of woodwork-making industry, and further screened 213 key enterprises to study the emission coefficient of woodwork-making industry. The results showed that more than 94% of woodwork enterprises failed to effectively dispose VOCs since most woodwork enterprises did not have treatment facilities. Moreover, solvent-based materials such as adhesive and paint were still commonly used in woodwork-making industry. Meanwhile, the main pollutants of VOCs in woodwork-making industry were dimethyl benzene, butyl acetate, ethyl acetate, toluene and formaldehyde. Furthermore, the VOCs emission coefficient of woodwork-making industry in Zhejiang was 93.4 g·(million Yuan)-1, while it was affected by the production processes, and the VOCs emission coefficient of enterprises using the coating techniques was higher than that using the adhesive techniques, being 93.6 g·(million Yuan)-1 and 9.5 g·(million Yuan)-1, respectively. Furthermore, the major polluting stage of woodwork-making industry was coating stage, and the VOCs emission coefficient was 31.0 g·(million Yuan)-1 when waterborne and UV coating was used. The highest VOCs emission coefficient was from wooden furniture manufacturers, which could reach 168.5 g·(million Yuan)-1 when solvent-based coatings were used.

[Pollution Characteristics and Emission Coefficient of Volatile Organic Compounds from Shoe-making Industry in Zhejiang Province].

To explore the pollution characteristics and emission coefficient of volatile organic compounds (VOCs) released from the shoe-making industry in Zhejiang province, this paper used the survey data of 490 shoe enterprises obtained in 2015 to analyze the current VOCs treatment status of shoe-making industry, and further screened 178 key enterprises to study the emission coefficient of shoe-making industry. The results showed that more than 95% of shoe enterprises failed to effectively dispose VOCs, because most shoe enterprises did not have treatment facilities. Moreover, solvent-based materials such as adhesive and primer were still commonly used in approximately 90% of shoe-making industry. Meanwhile, the main pollutants of VOCs in shoe-making industry were 2-butanone, toluene, acetone, cyclohexanone, ethyl acetate, xylene, dichloromethane and cyclohexane. Furthermore, the VOCs emission coefficient of shoe-making industry in Zhejiang was 29.5 g-1, while it was affected by the production processes, and the cemented construction techniques was higher than the injection techniques, which VOCs emission coefficients were 35.9 g-1 and 23.8 g-1, respectively. Furthermore, the major polluting stage of shoe-making industry was sole attaching, in which VOCs emission coefficient could reach 20.8 g-1.