Tethered Trimeric Small-molecular Acceptors through Aromatic-core Engineering for Highly Efficient and Thermally Stable Polymer Solar Cells.

Polymer solar cells (PSCs) rely on a blend of small molecular acceptors (SMAs) with polymer donors, where thermodynamic relaxation of SMAs poses critical concerns on operational stability. To tackle this issue, tethered SMAs, wherein multiple SMA-subunits are connected to the aromatic-core via flexible chains, are proposed. This design aims to an elevated glass transition temperature (Tg) for a dynamical control. However, attaining an elevated Tg value with additional SMA subunits introduces complexity to the molecular packing, posing a significant challenge in realizing both high stability and power conversion efficiency (PCE). In this study, we initiate isomer engineering on the benzene-carboxylate core and find that meta-positioned dimeric BDY-ß exhibits more favorable molecular packing compared to its para-positioned counterpart, BDY-α. With this encouraging result, we expand our approach by introducing an additional SMA unit onto the aromatic core of BDY-ß, maintaining a meta-position relative to each SMA unit location in the tethered acceptor. This systematic aromatic-core engineering results in a star-shaped C3h-positioned molecular geometry. The supramolecular interactions of SMA units in the trimer contribute to enhancements in Tg value, crystallinity, and a red-shifted absorption compared to dimers. These characteristics result in a noteworthy increase in PCE to 18.24 %, coupled with a remarkable short-circuit current density of 27.06 mA cm-2. More significantly, the trimer-based devices delivered an excellent thermal stability with over 95 % of their initial efficiency after 1200 h thermal degradation. Our findings underscore the promise and feasibility of tethered trimeric structures in achieving highly ordered aggregation behavior and increased Tg value in PSCs, simultaneously improving in device efficiency and thermal stability.

Dimeric Giant Molecule Acceptors Featuring N-type Linker: Enhancing Intramolecular Coupling for High-Performance Polymer Solar Cells.

Giant molecular acceptors (GMAs) are typically designed through the conjugated linking of individual small molecule acceptors (SMAs). This design imparts an extended molecular size, elevating the glass transition temperature (Tg) relative to their SMA counterparts. Consequently, it effectively suppresses the thermodynamic relaxation of the acceptor component when blended with polymer donors to construct stable polymer solar cells (PSCs). Despite their merits, the optimization of their chemical structure for further enhancing of device performance remains challenge. Different from previous reports utilizing p-type linkers, here, we explore an n-type linker, specifically the benzothiadiazole unit, to dimerize the SMA units via a click-like Knoevenagel condensation, affording BT-DL. In comparison with B-DL with a benzene linkage, BT-DL exhibits significantly stronger intramolecular super-exchange coupling, a desirable property for the acceptor component. Furthermore, BT-DL demonstrates a higher film absorption coefficient, redshifted absorption, larger crystalline coherence, and higher electron mobility. These inherent advantages of BT-DL translate into a higher power conversion efficiency of 18.49 % in PSCs, a substantial improvement over the 9.17 % efficiency observed in corresponding devices with B-DL as the acceptor. Notably, the BT-DL based device exhibits exceptional stability, retaining over 90 % of its initial efficiency even after enduring 1000 hours of thermal stress at 90 °C. This work provides a cost-effective approach to the synthesis of n-type linker-dimerized GMAs, and highlight their potential advantage in enhancing intramolecular coupling for more efficient and durable photovoltaic technologies.

Effect of Number and Position of Chlorine Atoms on the Photovoltaic Performance of Asymmetric Nonfullerene Acceptors.

It has been well proved that the introduction of halogen can effectively modify the optoelectronic properties of classic symmetric nonfullerene acceptors (NFAs). However, the relevant studies for asymmetric NFAs are limited, especially the effect of halogen substitution number and position on the photovoltaic performance is not clear. In this work, four asymmetric NFAs with A-D-A1-A2 structure are developed by tuning the number and position of chlorine atoms on the 1,1-dicyanomethylene-3-indanone end groups, namely, A303, A304, A305, and A306. The related NFAs show progressively deeper energy levels and red-shifted absorption spectra as the degree of chlorination increases. The PM6:A306-constructed organic solar cells (OSCs) give a champion power conversion efficiency (PCE) of 13.03%. This is mainly ascribed to the most efficient exciton dissociation and collection, suppressed charge recombination, and optimal morphology. Moreover, by alternating the substitution position, the PM6:A305-based device yielded a higher PCE of 12.53% than that of PM6:A304 (12.05%). This work offers fresh insights into establishing excellent asymmetric NFAs for OSCs.

Fabrication of a porous Urea@MIL-100(Fe)/CI-MCC/SA hydrogel for All-In-One adsorption, removal and fluorescence monitoring of nitrite.

In this paper, a novel All-In-One Urea@MIL-100(Fe)/CI-MCC/SA hydrogel platform was generated by microcrystalline cellulose (MCC) functionalized with pH-response probe (CI), MIL-100 (Fe) and sodium alginate (SA), which was as a carrier of urea to adsorb, remove and monitor NO2-. Under acidic condition, the fluorescent hydrogel platform could produce N2, CO2 and H2O through the diazotization and redox reaction between urea and NO2- with a removal efficiency up to 99.8%, and could also character a good adsorption property for NO2- due to the positive charges of protonation (the maximum adsorption capacity was 21.67 mg g-1), and the adsorption kinetics conformed to pseudo-second-order model. By carried out the NO2- removal step in fluorescent hydrogel platform, NO2- could also be detected indirectly by sensing the changes of pH within 15 min. The linear response range was 0-0.005 M, and the detection limit (LOD) was 74 µM. These results demonstrated that this All-In-One Urea@MIL-100(Fe)/CI-MCC/SA hydrogel platform had great potential in environment. This strategy for the removal and monitoring of NO2- could be employed to related applications in water purification and environmental protection. ENVIRONMENTAL IMPLICATION: Nitrite is one of the important indicators of water monitoring, which is harmful to human and environment. The removal and monitoring of nitrite in industrial wastewater and surface water is very important, but there are no studies about it at present. Based on the fact that urea can react with nitrite to produce green products, we synthesized a novel functional hydrogel to achieve adsorption, removal and fluorescence monitoring of nitrite for the first time. Besides, the practicability of the material in environmental water samples was verified through the detection of nitrite in simulated wastewater.

Syntheses, Characterization, Crystal Structures and Xanthine Oxidase Inhibitory Activity of Hydrazones.

Four new fluoro-containing hydrazones were synthesized from 4-fluorobenzaldehyde with chloro- and nitro-substituted benzohydrazides. They are 3-chloro-N'-(4-fluorobenzylidene)benzohydrazide (1), 2-chloro-N'-(4-fluorobenzylidene)benzohydrazide (2), N'-(4-fluorobenzylidene)-4-nitrobenzohydrazide (3), and N'-(4-fluorobenzylidene)-3-nitrobenzohydrazide (4). The compounds have been characterized by IR and 1H NMR spectra, as well as X-ray single crystal determination. Xanthine oxidase (XO) inhibitory activity indicated that the nitro substituted compounds 3 and 4 have effective activity. Docking simulation was performed to insert the compounds into the crystal structure of xanthine oxidase at the active site to investigate the probable binding modes.

Copper(II) and Nickel(II) Complexes Derived from Isostructural Bromo- and Fluoro-Containing Bis-Schiff Bases: Syntheses, Crystal Structures and Antimicrobial Activity.

A mononuclear copper(II) complex [CuLa] (1), and three mononuclear nickel(II) complexes [NiLa] (2), [NiLa]·CH3OH (2·CH3OH) and [NiLb] (3), where La and Lb are the dianionic form of N,N'-bis(4-bromosalicylidene)-1,2-cyclohexanediamine (H2La) and N,N'-bis(4-fluorosalicylidene)-1,2-cyclohexanediamine (H2Lb), respectively, were prepared and structurally characterized by spectroscopy method and elemental analyses. The detailed structures were determined by X-ray single crystal diffraction. All the copper and nickel complexes are mononuclear compounds. The metal ions in the complexes are in square planar coordination, with the two phenolate oxygens and two imine nitrogens of the Schiff base ligands. The biological effect of the four complexes were assayed on the bacteria strains Staphylococcus aureus, Escherichia coli and Candida albicans.

Geometry design of tethered small-molecule acceptor enables highly stable and efficient polymer solar cells.

With the power conversion efficiency of binary polymer solar cells dramatically improved, the thermal stability of the small-molecule acceptors raised the main concerns on the device operating stability. Here, to address this issue, thiophene-dicarboxylate spacer tethered small-molecule acceptors are designed, and their molecular geometries are further regulated via the thiophene-core isomerism engineering, affording dimeric TDY-α with a 2, 5-substitution and TDY-ß with 3, 4-substitution on the core. It shows that TDY-α processes a higher glass transition temperature, better crystallinity relative to its individual small-molecule acceptor segment and isomeric counterpart of TDY-ß, and a more stable morphology with the polymer donor. As a result, the TDY-α based device delivers a higher device efficiency of 18.1%, and most important, achieves an extrapolated lifetime of about 35000 hours that retaining 80% of their initial efficiency. Our result suggests that with proper geometry design, the tethered small-molecule acceptors can achieve both high device efficiency and operating stability.

Trinuclear Zinc(II) Complexes Derived from N,N'-Bis(5-bromosalicylidene)-1,2-cyclohexanediamine: Syntheses, Crystal Structures and Antimicrobial Activity.

Two new trinuclear zinc(II) complexes, [Zn3I2L2(H2O)2] (1) and [Zn3(CH3OH)(DMF)L2(NCS)2] (2), where L is the dianionic form of N,N'-bis(5-bromosalicylidene)-1,2-cyclohexanediamine (H2L), have been synthesized and characterized by elemental analyses, IR and UV spectra. Structures of the complexes were further confirmed by single crystal X-ray diffraction. Both complexes are trinuclear zinc compounds. Both compounds are solvated, with water ligand for 1 and methanol ligand for 2. The outer two Zn atoms are in square pyramidal coordination, while the inner one is in octahedral coordination. The effect of the complexes on the antimicrobial activity against Staphylococcus aureus, Escherichia coli and Candida albicans were evaluated, and gave interesting results.

Syntheses, Crystal Structures and Xanthine Oxidase Inhibitory Activity of Aroylhydrazones.

A series of hydrazones, (E)-N'-(4-hydroxy-3-methoxybenzylidene)-4-nitrobenzohydrazide (1), (E)-4-(dimethylamino)-N'-(4-hydroxy-3-methoxybenzylidene)benzohydrazide (2), N'-(2-hydroxy-5-methylbenzylidene)-4-nitrobenzohydrazide (3) and 2-fluoro-N'-(2-hydroxy-5-methylbenzylidene)benzohydrazide (4), were prepared and structurally characterized by elemental analysis, IR and 1H NMR spectra, and X-ray single crystal determination. The xanthine oxidase inhibitory activities of the compounds were investigated. Among the compounds, N'-(3-methoxybenzylidene)-4-nitrobenzohydrazide (1) showed the strongest activity. Docking simulations were performed to insert the compounds into the crystal structure of xanthine oxidase at the active site and to investigate the probable binding modes.

Tetranuclear Copper(II) Complexes Derived from 5-Bromo-2-((2-(2-hydroxyethylamino)ethylimino)methyl)phenol: Synthesis, Characterization, Crystal Structures and Catalytic Oxidation of Olefins.

An acetate bridged tetranuclear copper(II) complex, [Cu4L2(µ2-η1:η1-CH3COO)6(CH3OH)2] (1), and a chloride, phenolate and azide co-bridged tetranuclear copper(II) complex, [Cu4L2Cl2(µ-Cl)2(µ1,1-N3)2]2CH3OH (2), where L is the deprotonated form of the Schiff base 5-bromo-2-((2-(2-hydroxyethylamino)ethylimino)methyl)phenol (HL), have been synthesized and characterized by elemental analysis, IR and UV spectra, and single crystal X-ray diffraction. Single crystal X-ray analysis revealed that the Cu atoms in both complexes are in square pyramidal geometry. In complex 1, two [CuL] units and [Cu2(µ2-η1:η1-CH3COO)4] core are linked through two acetate ligands. In complex 2, [Cu2LCl(µ-Cl)] units are linked together by two end-on azido ligands. The Schiff base ligand coordinates to the Cu atoms through four N and O donor atoms. The molecules of both complexes are linked through hydrogen bonds to generate three dimensional networks. The catalytic property of the complexes for epoxidation reactions of some alkenes was studied using tert-butylhydroperoxide as the terminal oxidant under mild conditions in acetonitrile.

Synthesis, Biological Evaluation, and Molecular Docking Studies of Hydrazones as Novel Xanthine Oxidase Inhibitors.

A series of hydrazones, 2-cyano-N'-(4-diethylamino-2-hydroxybenzylidene)acetohydrazide (1), N'-(5-bromo-2-hydroxy-3-methoxybenzylidene)-3-chlorobenzohydrazide monohydrate (2·H2O), N'-(2-hydroxy-3-methylbenzylidene)-4-nitrobenzohydrazide (3), and N'-(2-hydroxy-3-trifluoromethoxybenzylidene)-4-nitrobenzohydrazide (4), were prepared and structurally characterized by elemental analysis, IR and 1H NMR spectra, and single crystal X-ray determination. Xanthine oxidase inhibitory activities of the compounds were studied. Among the compounds, 2-cyano-N'-(4-diethylamino-2-hydroxybenzylidene)acetohydrazide shows the most effective activity. Docking simulation was performed to insert the compounds into the crystal structure of xanthine oxidase at the active site to investigate the probable binding modes.

Low-cost synthesis of small molecule acceptors makes polymer solar cells commercially viable.

The acceptor-donor-acceptor (A-D-A) or A-DA'D-A structured small molecule acceptors (SMAs) have triggered substantial progress for polymer solar cells (PSCs). However, the high-cost of the SMAs impedes the commercial viability of such renewable energy, as their synthesis via the classical pyridine-catalyzed Knoevenagel condensation usually suffers from low reaction efficiency and tedious purifying work-up. Herein, we developed a simple and cheap boron trifluoride etherate-catalyzed Knoevenagel condensation for addressing this challenge, and found that the coupling of the aldehyde-terminated D unit and the A-end groups could be quantitatively finished in the presence of acetic anhydride within 15 minutes at room temperature. Compared with the conventional method, the high reaction efficiency of our method is related to the germinal diacetate pathway that is thermodynamically favorable to give the final products. For those high performing SMAs (such as ITIC-4F and Y6), the cost could be reduced by 50% compared with conventional preparation. In addition to the application in PSCs, our synthetic approach provides a facile and low-cost access to a wide range of D-A organic semiconductors for emerging technologies.

Synthesis, Structures, and Antibacterial Activities of Hydrazone Compounds Derived from 4-Dimethylaminobenzohydrazide.

A series of three new hydrazone compounds derived from the condensation reactions of 4-dimethylaminobenzohydrazide with 4-dimethylaminobenzaldehyde, 2-chloro-5-nitrobenzaldehyde and 3-methoxybenzaldehyde, respectively, were prepared. The compounds were characterized by elemental analysis, infrared and UV-vis spectra, HRMS, 1H NMR and 13C NMR spectra, and single crystal X-ray diffraction. Crystals of the compounds are stabilized by hydrogen bonds. The compounds were assayed for antibacterial (Bacillus subtilis, Escherichia coli, Pseudomonas fluorescence and Staphylococcus aureus) and antifungal (Aspergillus niger and Candida albicans) activities by MTT method. The results indicated that compound 2 is an effective antibacterial material.

Zinc(II) Complexes Derived from Schiff Bases: Syntheses, Structures, and Biological Activity.

Three new zinc(II) complexes, [Zn2I2(L1)2] (1), [Zn(HL2)2(NCS)2] (2), and [ZnIL3] (3), where L1 is the anionic form of 2-[(6-methylpyridin-2-ylimino)methyl]phenol (HL1), HL2 is the zwitterionic form of 2-(cyclopropyliminomethyl)-5-fluorophenol (HL2), and L3 is the anionic form of 5-bromo-2-[(3-morpholin-4-ylpropylimino)methyl]phenol (HL3), have been prepared and characterized by elemental analyses, IR, UV and NMR spectra, and single crystal X-ray crystallographic determination. Complex 1 is a dinuclear zinc complex, and complexes 2 and 3 are mononuclear zinc complexes. The Zn atoms in the complexes are in tetrahedral coordination. The effect of the complexes on the antimicrobial activity against Staphylococcus aureus, Escherichia coli, and Candida albicans were evaluated.

Cathode engineering with perylene-diimide interlayer enabling over 17% efficiency single-junction organic solar cells.

In organic solar cells (OSCs), cathode interfacial materials are generally designed with highly polar groups to increase the capability of lowering the work function of cathode. However, the strong polar group could result in a high surface energy and poor physical contact at the active layer surface, posing a challenge for interlayer engineering to address the trade-off between device stability and efficiency. Herein, we report a hydrogen-bonding interfacial material, aliphatic amine-functionalized perylene-diimide (PDINN), which simultaneously down-shifts the work function of the air stable cathodes (silver and copper), and maintains good interfacial contact with the active layer. The OSCs based on PDINN engineered silver-cathode demonstrate a high power conversion efficiency of 17.23% (certified value 16.77% by NREL) and high stability. Our results indicate that PDINN is an effective cathode interfacial material and interlayer engineering via suitable intermolecular interactions is a feasible approach to improve device performance of OSCs.

Synthesis, Crystal Structures and Catalytic Property of Dioxidomolybdenum(VI) Complexes with Tridentate Hydrazones.

New dioxidomolybdenum(VI) complexes with the formula [MoO2L(MeOH)], derived from N'-(5-chloro-2-hydroxy-benzylidene)-2-methylbenzohydrazide (H2L1) and N'-(3,5-dichloro-2-hydroxybenzylidene)-2-methylbenzohydrazide (H2L2) were prepared. Crystal and molecular structures of the complexes were determined by single crystal X-ray dif-fraction method. Both complexes were further characterized by elemental analysis and FT-IR spectra. Single crystal X-ray structural studies indicate that the hydrazones L1 and L2 coordinate to the MoO2 cores through the enolate oxygen, phenolate oxygen and azomethine nitrogen. The Mo atoms in both complexes are in octahedral coordination. Catalytic properties for epoxidation of styrene by the complexes using PhIO and NaOCl as oxidant have been studied.

Syntheses, X-Ray Single Crystal Structures and Biological Activities of Cobalt(III) Complexes with Reduced Schiff Base Ligands.

A new mononuclear cobalt(III) complex, [Co(HL1)2]Cl (1), derived from the reduced Schiff base 2,2'-((ethane-1,2-diylbis(azanediyl))bis(methylene))diphenol (H2L1), and a new dinuclear cobalt(III) complex, [Co2(L2)2]∆2H2O (2), derived from the reduced Schiff base 6,6'-(2-hydroxypropane-1,3-diyl)bis(azanediyl)bis(methylene)bis(2-bromo-4-chlorophenol) (H2L2), were synthesized and characterized by infrared and electronic spectroscopy, and single crystal X-ray diffraction techniques. The ligands were synthesized first, and then bound to the Co(III) centre. Compound 1 contains a mononuclear [Co(HL1)2]+ cation and a chloride anion. The cationic moiety possesses crystallographic inversion center symmetry. Compound 2 contains a dinuclear [Co2(L2)2] molecule and two water hydrate molecules. The Co atoms in the complexes are in octahedral coordination. Both complexes showed potential antimicrobial activity.

Syntheses, Crystal Structures, Antimicrobial Activity and Thermal Behavior of Copper(II) Complexes Derived from 1-Naphthylacetic Acid and Diamines.

Two copper(II) complexes, [CuL2(EA)] (1) and [Cu2L4(PA)2]·2H2O (2·2H2O), where L is 1-naphthylacetate, EA is N,N-diethylethane-1,2-diamine, PA is propane-1,3-diamine, have been prepared and characterized. Structures of the complexes have been characterized by single-cyrstal X-ray diffraction. Complex 1 is a mononuclear copper(II) compound, with the Cu atoms coordinated in square planar geometry. Complex 2·2H2O is a centrosymmetric dinuclear copper(II) compound, with the Cu atoms coordinated in square pyramidal geometry. Single crystals of the complexes are stabilized by hydrogen bonds. The effects of the compounds on the antimicrobial activity against Staphylococcus aureus, Escherichia coli, and Candida albicans, as well as thermal behavior of the complexes were studied.

Simplified synthetic routes for low cost and high photovoltaic performance n-type organic semiconductor acceptors.

The application of polymer solar cells (PSCs) with n-type organic semiconductor as acceptor requires further improving powder conversion efficiency, increasing stability and decreasing cost of the related materials and devices. Here we report a simplified synthetic route for 4,4,9,9-tetrahexyl-4,9-dihydro-s-indaceno [1,2-b:5,6-b'] dithiophene by using the catalyst of amberlyst15. Based on this synthetic route and methoxy substitution, two low cost acceptors with less synthetic steps, simple post-treatment and high yield were synthesized. In addition, the methoxy substitution improves both yield and efficiency. The high efficiency of 13.46% was obtained for the devices with MO-IDIC-2F (3,9-bis(2-methylene-5 or 6-fluoro-(3-(1,1-dicyanomethylene)-indanone)-4,4,9,9-tetrahexyl-5,10-dimethoxyl-4,9-dihydro-s-indaceno[1,2-b:5,6-b'] dithiophene) as acceptor. Based on the cost analysis, the PSCs based on MO-IDIC-2F possess the great advantages of low cost and high photovoltaic performance in comparison with those PSCs reported in literatures. Therefore, MO-IDIC-2F will be a promising low cost acceptor for commercial application of PSCs.

Ultrafast hole transfer mediated by polaron pairs in all-polymer photovoltaic blends.

The charge separation yield at a bulk heterojunction sets the upper efficiency limit of an organic solar cell. Ultrafast charge transfer processes in polymer/fullerene blends have been intensively studied but much less is known about these processes in all-polymer systems. Here, we show that interfacial charge separation can occur through a polaron pair-derived hole transfer process in all-polymer photovoltaic blends, which is a fundamentally different mechanism compared to the exciton-dominated pathway in the polymer/fullerene blends. By utilizing ultrafast optical measurements, we have clearly identified an ultrafast hole transfer process with a lifetime of about 3 ps mediated by photo-excited polaron pairs which has a markedly high quantum efficiency of about 97%. Spectroscopic data show that excitons act as spectators during the efficient hole transfer process. Our findings suggest an alternative route to improve the efficiency of all-polymer solar devices by manipulating polaron pairs.